XXXinzhe Xue

Xinzhe Xue

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xinzhe Xue has a total of 105 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Copper Surface Engineering Enables Uniform Zn Plating in Zn Batteries at Unity N/P Ratio

    by Xinzhe Xue, Mykyta Motin, Marisa Hertzog, Calvin D. Quilty, Igor I. Bezsonov, Karim Aljamal, Nathan Delaney, Samuel Eisenberg, Cassidy Tran, Swetha Chandrasekaran, et al.

    Zinc (Zn) metal plating is notoriously sensitive to interfacial inefficiencies under Zn‐limited conditions, where small losses of active Zn rapidly lead to premature cell failure. Here, we demonstrate a surface reconstruction strategy for copper (Cu) current collectors that enables exceptional performance at a negative‐to‐positive (N/P) capacity ratio of 1.0. By chemically etching Cu to create a sacrificial cuprous chloride (γ‐CuCl) interface, we obtained a micro‐textured Cu substrate with increased electrochemical surface area (ECSA). Upon initial electrochemical reduction, γ‐CuCl converts to metallic Cu while releasing Cl − ions into the local interfacial region of the electrolyte. Density functional theory calculations indicate that localized Cl − ions favorably regulate Zn 2+ adsorption energy while suppressing the hydrogen evolution reaction. Benefitting from the synergistic combination of enhanced ECSA and dynamic Cl − mediated interfacial engineering, Zn//Cu cells achieve stable plating/stripping cycling for 1654 h (69 days). Notably, Zn//MnO 2 full cells using 3D‐printed etched Cu substrate assembled under a nominal N/P ratio of 1.0 (determined by a reversible capacity at 10 mA cm −2 ) deliver a remarkable device volumetric capacity of 53.5 mAh cm −3 . Under high‐rate cycling (80 mA cm −2 ), the cell retains 70% of initial capacity over 500 cycles. This performance represents a benchmark for Zn reversibility under extreme material‐limited conditions.

  • From Micro to Nano: Boosting γ-MnO2 Cathode Performance through Particle Size Engineering

    by Ella Davidi, Isaac Loke, Samuel Eisenberg, Xinzhe Xue, Megan C. Freyman, Asya Orhan, Erika P. Ramos, Jianchao Ye, Seongkoo Cho, Makena White, et al.

    Fast-charging lithium-ion batteries require cathodes that sustain rapid Li+ transport while maintaining structural and interfacial stability. Here, we investigate particle-size effects in γ-MnO2 by comparing micron-sized (4.4 ± 0.8 μm) and nanosized (62 ± 21 nm) particles under identical conditions. Nanosized γ-MnO2 delivers 160.1 mAh g–1 at C/10 and retains ∼66% capacity at 5C while exhibiting lower charge-transfer and diffusion-related impedance. Cyclic voltammetry and Dunn’s analysis reveal a 68.9% capacitive contribution at 2 mV s–1, indicating a shift toward faster surface-controlled charge storage enabled by increased surface area and shorter Li+ diffusion pathways. GITT measurements show deeper lithiation (x ≈ 0.65 vs 0.48 in LixMnO2) and a more homogeneous solid-solution-like intercalation regime in nanosized particles, avoiding bulk phase-transition kinetic bottlenecks. The nanosized cathode retains 70% capacity with ∼99.5% Coulombic efficiency after 400 cycles at 3C, demonstrating particle-size engineering as an effective strategy for high-rate, long-life advanced battery energy storage.

  • Thermodynamic Control of Interface Directs MnO 2 Nucleation Chemistry for Dense and Conformal Electrodeposition

    by Xinzhe Xue, Swetha Chandrasekaran, Jean-Baptiste Forien, Anica Pinongcos, Malia Parra, Logan Valdovinos, Samuel Avalos Franco, Bruce Dunn, Marcus A. Worsley, Christine A. Orme, et al.

    Manganese dioxide (MnO2) is widely recognized as a promising material for high-energy-density energy storage systems due to its broad applicability and facile electrodeposition. However, achieving uniform, thin, and high-mass-loading MnO2 coatings on high-surface-area electrodes remains a significant challenge. Conventional electrodeposition methods typically yield nonuniform, thick layers with poor conductivity and limited material utilization, restricting their practical use. Here, we uncover a thermodynamically engineered vanadyl/pervanadyl (VO2+/VO2+) interface that fundamentally reshapes MnO2 electrodeposition chemistry, enabling highly uniform and dense coatings. Combining in situ AFM measurement, Classical Nucleation Theory, and Johnson-Mehl-Avrami-Kolmogorov modeling, we show that this interface reduces early-stage detectable MnO2 island size by 35-fold and shifts the MnO2 growth from diffusion-limited to reaction-limited progressive nucleation. This thermodynamically controlled interface yields highly dense and conformal MnO2 films with record-high mass loading of 241 mg cm-2 (1607 mg cm-3) on 3D-printed graphene aerogels, without compromising porosity or inducing thickness gradient. As a prototype demonstration, the resulting MnO2 electrodes deliver record-setting volumetric performance in both capacitors (106 F cm-3) and Zn//MnO2 pouch cells (162 mAh cm-3). Beyond energy storage, our findings demonstrate the significance of thermodynamic interface control in MnO2 nucleation chemistry for achieving dense and uniform coatings on various substrates, with implications for electrocatalysis, semiconductor processing, and advanced materials manufacturing.


  • Open Access

    A Parallel Kinetic Model for Surface and Bulk Charge Storage in ε-MnO 2 Pseudocapacitors

    by Nicholas W Brady, Asya Nelson-Gal, Erika Paola Ramos Guzman, Dun Lin, Xinzhe Xue, Victoria Ehlinger, Nicholas Robert Cross, Tiras Lin, Thomas Roy, Hanyu Li, et al.

    Pseudocapacitive materials such as manganese dioxide (MnO 2 ) are attractive for energy storage applications due to their ability to combine the fast kinetics of capacitors with the higher energy density of battery-type systems. However, the electrochemical behavior of \MnO 2 remains difficult to interpret mechanistically, in part because existing models often fail to distinguish between surface-based redox processes and bulk intercalation mechanisms. In this work, we develop a physics-based model that represents MnO 2 pseudocapacitance as a linear combination of two independent, parallel electrochemical processes: (i) the surface or near-surface redox storage and (ii) lithium ion intercalation into the bulk material. These two processes are treated with distinct kinetic and thermodynamic parameters and are assumed to proceed independently. The total measured current is assumed to be the sum of these two partial currents. We validate the model using rate-dependent cyclic voltammetry experiments, demonstrating that it captures key trends and provides physically interpretable parameters reflecting the relative contributions of surface and bulk processes. By enabling a clear separation between these mechanisms, the model offers a useful framework for analyzing pseudocapacitive materials and can guide the rational design of high-performance energy storage electrodes.


  • Architecting the Third Dimension of Electrochemical Energy Storage

    by Xinzhe Xue, Swetha Chandrasekaran, Cheng Zhu, Marcus A. Worsley, Yat Li


  • Interface‐Controlled Redox Chemistry in Aqueous Mn 2 ⁺/MnO₂ Batteries

    by Xinzhe Xue, Zhen Liu, Swetha Chandrasekaran, Samuel Eisenberg, Curtis Althaus, Megan C. Freyman, Anica Pinongcos, Qiu Ren, Logan Valdovinos, Cathleen Hsieh, et al.

    Manganese dioxide (MnO 2 ) deposition/dissolution (Mn 2+ /MnO 2 ) chemistry, involving a two‐electron‐transfer process, holds promise for safe and eco‐friendly large‐scale energy storage. However, challenges like electrode/electrolyte interface environment fluctuations (H + and H 2 O activity), irreversible Mn degradation, and limited understanding of degradation mechanisms hinder the reversibility of the Mn 2+ /MnO 2 conversion. This study demonstrates a vanadyl/pervanadyl (VO 2+ /VO 2 + ) redox‐mediated interface designed for high‐energy Mn 2+ /MnO 2 batteries. Unlike flow systems, this work uncovers, for the first time, the mechanism of a static redox‐mediated interface in regulating interfacial H + and H 2 O activities. Significantly, the VO 2+ /VO 2 + chemical redox mediation targets Mn 3+ intermediates, suppressing their hydrolysis and enabling 100% Mn 2+ /MnO 2 conversion. The redox‐mediated interface enhances the Mn redox electron transfer process, achieving a stable ≈95% coulombic efficiency and ultrahigh capacity of 100 mAh cm − 2 with an areal energy density of 111 mWh cm − 2 , outperforming flow systems. The electrode also exhibits an average specific capacity of 593 mAh g −1 , approaching the theoretical limit of 616 mAh g −1 , and a specific energy density of 721 Wh kg −1 at high MnO 2 loadings (50–150 mg cm −2 ). The findings highlight the critical role of interfacial redox mediation in regulating H + and H 2 O activities and underscore the significance of interface dynamics.


  • Innovative Electrode Design for Low-Temperature Electrochemical Energy Storage: A Mini Review

    by Anica B. Pinongcos, Xinzhe Xue, Swetha Chandrasekaran, Marcus A. Worsley, Yat Li


  • Nanocone-Modified Surface Facilitates Gas Bubble Detachment for High-Rate Alkaline Water Splitting

    by Qiu Ren, Longsheng Feng, Congwang Ye, Xinzhe Xue, Dun Lin, Sam Eisenberg, Tianyi Kou, Eric B Duoss, Cheng Zhu, Yat Li

    Alkaline water splitting (AWS) is one of the most attractive technologies for green hydrogen production. In comparison to the acidic proton exchange membrane (PEM), AWS offers greater flexibility in using non-platinum group metal catalysts and could generate higher-purity hydrogen. However, commercial AWS systems are normally operated at a lower current density (~400 mA cm-2) than PEM electrolyzers. To rapidly generate hydrogen at an industrial scale, it is critical to boost the operating current density of AWS to a level of ~1000 mA cm-2. Nevertheless, the significant amount of gas bubbles generated during high-rate AWS could be detrimental to the process. Bubbles can block the catalysts’ active site, hinder electrolyte diffusion, and increase Ohmic resistance, thus deteriorating the reaction rate and restricting the cell voltage efficiency. The detachment of gas bubbles may also damage the catalyst layer. In this study, we demonstrate a general strategy for facilitating bubble detachment by modifying the nickel electrode surface with nickel nanocone nanostructures, which turns the surface into underwater superaerophobic. The simulation and experimental data show that bubbles take a considerably shorter time to detach from the nanocone-modified nickel foil than the unmodified foil. As a result, these bubbles also have a smaller detachment size and less chance for bubble coalescence. The nanocone-modified electrodes, including nickel foil, nickel foam, and 3D-printed nickel lattice, all show substantially reduced overpotentials at 1000 mA cm-2 compared to their pristine counterpart. The electrolyzer assembled with two nanocone-modified nickel lattice electrodes retains >95% of the performance after testing at ~900 mA cm-2 for 100 hours and the surface NC structure is also well preserved, demonstrating its excellent electrochemical and mechanical stability at high current density. Our findings offer an exciting and simple strategy for enhancing the bubble detachment and, thus, the electrode activity for high-rate AWS.

  • Design and Additive Manufacturing of Electrodes for Electrochemical Energy Storage

    by Mariana Desiree Reale Batista, Swetha Chandrasekaran, Bryan Moran, Miguel A Salazar de Troya, Anica Pinongcos, Zhen Wang, Ryan Hensleigh, Adam Carleton, Manhao Zeng, Thomas Roy, et al.

    Supercapacitors exhibit rapid charge/discharge times and have attracted considerable attention within the automotive, aerospace, and telecommunication industries. The high electrical conductivity and surface area of porous carbons have been attractive for supercapacitor electrodes. Fabricating thick electrodes is one strategy to further increase energy density due to a higher volume fraction of active material. However, thick electrodes suffer from sluggish charged species transport. In this work, we investigate the use of computational optimization and additive manufacturing to design and fabricate thick porous electrodes with improved performance. Electrode performance was maximized by designing their morphologies via topology optimization and printing by projection micro stereolithography (PµSL) using commercial resin (PR48). The PR48 resin was then pyrolyzed (PR48-P) to create the final conductive electrode. The optimized PR48-P electrodes exhibited 99% improvement in capacitance compared to control electrodes printed with cubic lattice morphologies. To further improve performance, we formulated a resin combining graphene oxide (GO) and trimethylolpropane triacrylate (TMPTA). Electrodes printed with 3 wt% GO in TMPTA exhibited improved capacitance retention after pyrolysis compared to the PR48-P electrodes. This work demonstrates the enormous potential of leveraging topology optimization and additive manufacturing to resolve many challenges in the electrochemical storage and renewable energy regimes. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344. Lawrence Livermore National Security, LLC Figure 1