Thierry Lefebvre
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Thierry Lefebvre has a total of 100 co-authors. Here are the top co-authors by number of shared publications:
- Nathalie Bartoli
DTIS, ONERA, Université de Toulouse, Toulouse, France
18 shared publications - Jasper Bussemaker
Institute of System Architectures in Aeronautics, German Aerospace Center (DLR), Hamburg, Germany
7 shared publications - Joseph Morlier
Université de Toulouse, ISAE-SUPAERO, Toulouse, France
6 shared publications - Youssef Diouane
Department of Mathematical and Industrial Engineering, Polytechnique Montreal, Montreal, Canada
6 shared publications - Paul Saves
ONERA/DTIS Université de Toulouse 31400 Toulouse France
5 shared publications - Prajwal Shiva Prakasha
German Aerospace Center (DLR), Institute of System Architectures in Aeronautics, Hein-Saß-Weg 22, 21129 Hamburg, Germany
5 shared publications
Latest Publications
- Open Access
- 24 July 2026
- Published by Springer Nature in CEAS Aeronautical Journal
- p. 1-24
Review of methods for assessing the climate impacts of aviation technologies and the resulting best practices
The climate impact of aviation resulting from both $$\text {CO}_2$$ emissions and $$\text {non-CO}_2$$ effects is gaining attention from aviation stakeholders seeking to identify potential mitigation options. There is a need to consolidate the use of assessment methods and climate metrics, which are required to convert aviation $$\text {non-CO}_2$$ effects into $$\text {CO}_2$$ -equivalent emissions. We provide an overview of the operational, technological and scenario-based climate impact assessment methods that have been applied in literature as well as considerations and requirements for the choice of climate metric. We propose a four-layer technology climate impact assessment methodology, which includes: (1) the technology parameters, such as entry into service and temporal and spatial network use; (2) the calculation of three-dimensional aircraft trajectories and emission inventories; (3) the calculation of radiative forcing and induced temperature change time series; and (4) the overall climate impact, measured using a climate metric. We recommend two climate metrics that best fulfill the requirements, the Average Temperature Response (ATR100) and the Efficacy-weighted Global Warming Potential (EGWP100), both over 100 years. Additionally, we discuss further steps, such as the understanding of the most sensitive parameters in this approach, how uncertainties can be included to provide robust estimates, aspects of verification and update possibilities for new findings in research.- 24 July 2026
- Published by Springer Nature in CEAS Aeronautical Journal
- p. 1-24
Open AccessReview of methods for assessing the climate impacts of aviation technologies and the resulting best practices
The climate impact of aviation resulting from both $$\text {CO}_2$$ emissions and $$\text {non-CO}_2$$ effects is gaining attention from aviation stakeholders seeking to identify potential mitigation options. There is a need to consolidate the use of assessment methods and climate metrics, which are required to convert aviation $$\text {non-CO}_2$$ effects into $$\text {CO}_2$$ -equivalent emissions. We provide an overview of the operational, technological and scenario-based climate impact assessment methods that have been applied in literature as well as considerations and requirements for the choice of climate metric. We propose a four-layer technology climate impact assessment methodology, which includes: (1) the technology parameters, such as entry into service and temporal and spatial network use; (2) the calculation of three-dimensional aircraft trajectories and emission inventories; (3) the calculation of radiative forcing and induced temperature change time series; and (4) the overall climate impact, measured using a climate metric. We recommend two climate metrics that best fulfill the requirements, the Average Temperature Response (ATR100) and the Efficacy-weighted Global Warming Potential (EGWP100), both over 100 years. Additionally, we discuss further steps, such as the understanding of the most sensitive parameters in this approach, how uncertainties can be included to provide robust estimates, aspects of verification and update possibilities for new findings in research. - Open Access
- 26 February 2026
- Published by Elsevier in Reliability Engineering & System Safety
- Vol. 272
Scalable sparse co-Kriging for multi-fidelity data fusion: An application to aerodynamics
- 26 February 2026
- Published by Elsevier in Reliability Engineering & System Safety
- Vol. 272
Open AccessScalable sparse co-Kriging for multi-fidelity data fusion: An application to aerodynamics
- 1 September 2025
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 62 (5) , 1396-1410
Concurrent Value-Driven Optimization Problems Addressing Aircraft Design, Manufacturing, and Supply Chain
In the last decades, several studies show how the concurrent evaluation of manufacturing and supply chain in the early design phase brings significant advantages to industries. In this frame, a value-driven methodology has been developed and applied in the aeronautical context to identify the best solution when considering design, manufacturing, and supply chain criteria at the same time. This study aims at including optimization algorithms in the methodology to face a new challenge: the identification of solutions simultaneously optimizing manufacturing, design, and supply chain variables. To achieve this objective, collaborative optimization problems are presented in this research activity in three multidisciplinary design and optimization (MDO) cases, which integrate domains first in pairs and then together. Shortly, MDO case I identifies a Pareto front of optimal supply chain combinations producing aircraft components among millions of possibilities after several hours of execution; MDO case II shows the optimal aircraft configuration made by considering hundreds of combinations of materials and processes in less than one hour; MDO case III reaches the Pareto front in a half-day considering millions of choices of materials, processes, and enterprises.
- 1 September 2025
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aircraft
- Vol. 62 (5) , 1396-1410
Concurrent Value-Driven Optimization Problems Addressing Aircraft Design, Manufacturing, and Supply Chain
In the last decades, several studies show how the concurrent evaluation of manufacturing and supply chain in the early design phase brings significant advantages to industries. In this frame, a value-driven methodology has been developed and applied in the aeronautical context to identify the best solution when considering design, manufacturing, and supply chain criteria at the same time. This study aims at including optimization algorithms in the methodology to face a new challenge: the identification of solutions simultaneously optimizing manufacturing, design, and supply chain variables. To achieve this objective, collaborative optimization problems are presented in this research activity in three multidisciplinary design and optimization (MDO) cases, which integrate domains first in pairs and then together. Shortly, MDO case I identifies a Pareto front of optimal supply chain combinations producing aircraft components among millions of possibilities after several hours of execution; MDO case II shows the optimal aircraft configuration made by considering hundreds of combinations of materials and processes in less than one hour; MDO case III reaches the Pareto front in a half-day considering millions of choices of materials, processes, and enterprises.
- Open Access
Multi-objective Bayesian Optimization With Mixed-categorical Design Variables for Expensive-to-evaluate Aeronautical Applications
This work aims at developing new methodologies to optimize computational costly complex systems (e.g., aeronautical engineering systems). The proposed surrogate-based method (often called Bayesian optimization) uses adaptive sampling to promote a trade-off between exploration and exploitation. Our in-house implementation, called SEGOMOE, handles a high number of design variables (continuous, discrete or categorical) and nonlinearities by combining mixtures of experts for the objective and/or the constraints. Additionally, the method handles multi-objective optimization settings, as it allows the construction of accurate Pareto fronts with a minimal number of function evaluations. Different infill criteria have been implemented to handle multiple objectives with or without constraints. The effectiveness of the proposed method was tested on practical aeronautical applications within the context of the European Project AGILE 4.0 and demonstrated favorable results. A first example concerns a retrofitting problem where a comparison between two optimizers have been made. A second example introduces hierarchical variables to deal with architecture system in order to design an aircraft family. The third example increases drastically the number of categorical variables as it combines aircraft design, supply chain and manufacturing process. In this article, we show, on three different realistic problems, various aspects of our optimization codes thanks to the diversity of the treated aircraft problems.
Open AccessMulti-objective Bayesian Optimization With Mixed-categorical Design Variables for Expensive-to-evaluate Aeronautical Applications
This work aims at developing new methodologies to optimize computational costly complex systems (e.g., aeronautical engineering systems). The proposed surrogate-based method (often called Bayesian optimization) uses adaptive sampling to promote a trade-off between exploration and exploitation. Our in-house implementation, called SEGOMOE, handles a high number of design variables (continuous, discrete or categorical) and nonlinearities by combining mixtures of experts for the objective and/or the constraints. Additionally, the method handles multi-objective optimization settings, as it allows the construction of accurate Pareto fronts with a minimal number of function evaluations. Different infill criteria have been implemented to handle multiple objectives with or without constraints. The effectiveness of the proposed method was tested on practical aeronautical applications within the context of the European Project AGILE 4.0 and demonstrated favorable results. A first example concerns a retrofitting problem where a comparison between two optimizers have been made. A second example introduces hierarchical variables to deal with architecture system in order to design an aircraft family. The third example increases drastically the number of categorical variables as it combines aircraft design, supply chain and manufacturing process. In this article, we show, on three different realistic problems, various aspects of our optimization codes thanks to the diversity of the treated aircraft problems.
- Open Access
Surrogate-based optimization of system architectures subject to hidden constraints
The exploration of novel architectures requires physics-based simulation due to a lack of prior experience to start from, which introduces two specific challenges for optimization algorithms: evaluations become more expensive (in time) and evaluations might fail. The former challenge is addressed by Surrogate-Based Optimization (SBO) algorithms, in particular Bayesian Optimization (BO) using Gaussian Process (GP) models. An overview is provided of how BO can deal with challenges specific to architecture optimization, such as design variable hierarchy and multiple objectives: specific measures include ensemble infills and a hierarchical sampling algorithm. Evaluations might fail due to non-convergence of underlying solvers or infeasible geometry in certain areas of the design space. Such failed evaluations, also known as hidden constraints, pose a particular challenge to SBO/BO, as the surrogate model cannot be trained on empty results. This work investigates various strategies for satisfying hidden constraints in BO algorithms. Three high-level strategies are identified: rejection of failed points from the training set, replacing failed points based on viable (non-failed) points, and predicting the failure region. Through investigations on a set of test problems including a jet engine architecture optimization problem, it is shown that best performance is achieved with a mixed-discrete GP to predict the Probability of Viability (PoV), and by ensuring selected infill points satisfy some minimum PoV threshold. This strategy is demonstrated by solving a jet engine architecture problem that features at 50% failure rate and could not previously be solved by a BO algorithm. The developed BO algorithm and used test problems are available in the open-source Python library SBArchOpt.
Open AccessSurrogate-based optimization of system architectures subject to hidden constraints
The exploration of novel architectures requires physics-based simulation due to a lack of prior experience to start from, which introduces two specific challenges for optimization algorithms: evaluations become more expensive (in time) and evaluations might fail. The former challenge is addressed by Surrogate-Based Optimization (SBO) algorithms, in particular Bayesian Optimization (BO) using Gaussian Process (GP) models. An overview is provided of how BO can deal with challenges specific to architecture optimization, such as design variable hierarchy and multiple objectives: specific measures include ensemble infills and a hierarchical sampling algorithm. Evaluations might fail due to non-convergence of underlying solvers or infeasible geometry in certain areas of the design space. Such failed evaluations, also known as hidden constraints, pose a particular challenge to SBO/BO, as the surrogate model cannot be trained on empty results. This work investigates various strategies for satisfying hidden constraints in BO algorithms. Three high-level strategies are identified: rejection of failed points from the training set, replacing failed points based on viable (non-failed) points, and predicting the failure region. Through investigations on a set of test problems including a jet engine architecture optimization problem, it is shown that best performance is achieved with a mixed-discrete GP to predict the Probability of Viability (PoV), and by ensuring selected infill points satisfy some minimum PoV threshold. This strategy is demonstrated by solving a jet engine architecture problem that features at 50% failure rate and could not previously be solved by a BO algorithm. The developed BO algorithm and used test problems are available in the open-source Python library SBArchOpt.
- Open Access
Bayesian optimization for mixed variables using an adaptive dimension reduction process: applications to aircraft design
Multidisciplinary design optimization methods aim at adapting numerical optimization techniques to the design of engineering systems involving multiple disciplines. In this context, a large number of mixed continuous, integer and categorical variables might arise during the optimization process and practical applications involve a large number of design variables. Recently, there has been a growing interest in mixed variables constrained Bayesian optimization but most existing approaches severely increase the number of the hyperparameters related to the surrogate model. In this paper, we address this issue by constructing surrogate models using less hyperparameters. The reduction process is based on the partial least squares method. An adaptive procedure for choosing the number of hyperparameters is proposed. The performance of the proposed approach is confirmed on analytical tests as well as two real applications related to aircraft design. A significant improvement is obtained compared to genetic algorithms.
Open AccessBayesian optimization for mixed variables using an adaptive dimension reduction process: applications to aircraft design
Multidisciplinary design optimization methods aim at adapting numerical optimization techniques to the design of engineering systems involving multiple disciplines. In this context, a large number of mixed continuous, integer and categorical variables might arise during the optimization process and practical applications involve a large number of design variables. Recently, there has been a growing interest in mixed variables constrained Bayesian optimization but most existing approaches severely increase the number of the hyperparameters related to the surrogate model. In this paper, we address this issue by constructing surrogate models using less hyperparameters. The reduction process is based on the partial least squares method. An adaptive procedure for choosing the number of hyperparameters is proposed. The performance of the proposed approach is confirmed on analytical tests as well as two real applications related to aircraft design. A significant improvement is obtained compared to genetic algorithms.
- Open Access
Regularized infill criteria for multi-objective Bayesian optimization with application to aircraft design
Bayesian optimization is an advanced tool to perform ecient global optimization It consists on enriching iteratively surrogate Kriging models of the objective and the constraints both supposed to be computationally expensive of the targeted optimization problem Nowadays efficient extensions of Bayesian optimization to solve expensive multiobjective problems are of high interest The proposed method in this paper extends the super efficient global optimization with mixture of experts SEGOMOE to solve constrained multiobjective problems To cope with the illposedness of the multiobjective inll criteria different enrichment procedures using regularization techniques are proposed The merit of the proposed approaches are shown on known multiobjective benchmark problems with and without constraints The proposed methods are then used to solve a biobjective application related to conceptual aircraft design with ve unknown design variables and three nonlinear inequality constraints The preliminary results show a reduction of the total cost in terms of function evaluations by a factor of 20 compared to the evolutionary algorithm NSGA-II.
Open AccessRegularized infill criteria for multi-objective Bayesian optimization with application to aircraft design
Bayesian optimization is an advanced tool to perform ecient global optimization It consists on enriching iteratively surrogate Kriging models of the objective and the constraints both supposed to be computationally expensive of the targeted optimization problem Nowadays efficient extensions of Bayesian optimization to solve expensive multiobjective problems are of high interest The proposed method in this paper extends the super efficient global optimization with mixture of experts SEGOMOE to solve constrained multiobjective problems To cope with the illposedness of the multiobjective inll criteria different enrichment procedures using regularization techniques are proposed The merit of the proposed approaches are shown on known multiobjective benchmark problems with and without constraints The proposed methods are then used to solve a biobjective application related to conceptual aircraft design with ve unknown design variables and three nonlinear inequality constraints The preliminary results show a reduction of the total cost in terms of function evaluations by a factor of 20 compared to the evolutionary algorithm NSGA-II.
- Open Access
- 10 April 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 90 (1) , 95
Assessing Policies for the Uptake of Sustainable Aviation Fuels Using the Impact Monitor Framework
The Impact Monitor Project, funded by the EU, aims to develop an impact assessment framework for European aviation. This paper uses the framework for the modelling and simulation of an impact assessment at the air transport system level, focusing on policies for the uptake of sustainable aviation fuels. It aims to demonstrate the capabilities developed by the Impact Monitor framework and its interactive dashboard application at the air transport system level.
- 10 April 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 90 (1) , 95
Open AccessAssessing Policies for the Uptake of Sustainable Aviation Fuels Using the Impact Monitor Framework
The Impact Monitor Project, funded by the EU, aims to develop an impact assessment framework for European aviation. This paper uses the framework for the modelling and simulation of an impact assessment at the air transport system level, focusing on policies for the uptake of sustainable aviation fuels. It aims to demonstrate the capabilities developed by the Impact Monitor framework and its interactive dashboard application at the air transport system level.
- Open Access
- 28 March 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 90 (1) , 87
Assessing Advanced Propulsion Systems Using the Impact Monitor Framework
Presented in this paper is the Impact Monitor framework and interactive Dashboard Application (DA) validated through a use case, focusing on investigating the viability and competitiveness of future propulsion architectures for next-generation aircraft concepts. This paper presents a novel collaborative framework for integrated aircraft-level assessments, focusing on secure, remote workflows that protect intellectual property (IP) while enabling comprehensive and automated analyses. The research addresses a key gap in the aerospace domain: the seamless matching and sizing of aircraft engines within an automated workflow that integrates multiple tools and facilitates real-time data exchanges. Specifically, thrust requirements are iteratively shared between aircraft and engine modeling environments for synchronized sizing. Subsequently, the fully defined aircraft data are transferred to other tools for trajectory analysis and emissions and other assessments. The Impact Monitor framework and Dashboard Application demonstrate improved efficiency and data security, promoting effective collaboration across institutions and industry partners.
- 28 March 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 90 (1) , 87
Open AccessAssessing Advanced Propulsion Systems Using the Impact Monitor Framework
Presented in this paper is the Impact Monitor framework and interactive Dashboard Application (DA) validated through a use case, focusing on investigating the viability and competitiveness of future propulsion architectures for next-generation aircraft concepts. This paper presents a novel collaborative framework for integrated aircraft-level assessments, focusing on secure, remote workflows that protect intellectual property (IP) while enabling comprehensive and automated analyses. The research addresses a key gap in the aerospace domain: the seamless matching and sizing of aircraft engines within an automated workflow that integrates multiple tools and facilitates real-time data exchanges. Specifically, thrust requirements are iteratively shared between aircraft and engine modeling environments for synchronized sizing. Subsequently, the fully defined aircraft data are transferred to other tools for trajectory analysis and emissions and other assessments. The Impact Monitor framework and Dashboard Application demonstrate improved efficiency and data security, promoting effective collaboration across institutions and industry partners.
- Open Access
- 18 March 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 90 (1) , 61
Impact Monitor Framework: Development and Implementation of a Collaborative Framework for Aviation Impact Assessment
The development and implementation of a collaborative framework for aviation impact assessment studies is presented. The focus is on which technologies can be used to enable the collaborative aspect, including the use of a common data model, the secure transfer of data between domain experts in different locations, and the automated execution of impact assessment workflows. It is demonstrated how the selected technologies can be extended to meet the requirements of air transport systems assessment and how they can be integrated into a common framework. The results of the developments are discussed in terms of their technical capabilities and the lessons learned from their practical use. The proposed framework shows that collaborative impact assessment studies can be conducted efficiently and securely. This forms the basis for three application studies in the same research project.
- 18 March 2025
- Published by MDPI AG in Engineering Proceedings
- Vol. 90 (1) , 61
Open AccessImpact Monitor Framework: Development and Implementation of a Collaborative Framework for Aviation Impact Assessment
The development and implementation of a collaborative framework for aviation impact assessment studies is presented. The focus is on which technologies can be used to enable the collaborative aspect, including the use of a common data model, the secure transfer of data between domain experts in different locations, and the automated execution of impact assessment workflows. It is demonstrated how the selected technologies can be extended to meet the requirements of air transport systems assessment and how they can be integrated into a common framework. The results of the developments are discussed in terms of their technical capabilities and the lessons learned from their practical use. The proposed framework shows that collaborative impact assessment studies can be conducted efficiently and securely. This forms the basis for three application studies in the same research project.