Keliane de Jesus Reis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Keliane de Jesus Reis has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Anna Carolina de Almeida Andrade
Universidade Federal de Sergipe
4 shared publications - Jorge Artur Santos
Universidade Federal de Sergipe
4 shared publications - Márcio Ricardo Nascimento Lima
Universidade Federal de Sergipe
4 shared publications - Isadora Luz Silva Moreira Vieira
Universidade Federal de Sergipe
3 shared publications - Lara Soares Ribeiro dos Santos
Universidade Federal de Sergipe
3 shared publications - Mariane Silva
Universidade Federal de Sergipe
3 shared publications
Latest Publications
- Open Access
- 1 April 2025
- Published by Research, Society and Development in Research, Society and Development
- Vol. 14 (4)
Potencial uso do lodo de esgoto urbano como fonte energética
O lodo de esgoto apresenta-se como um potencial problema econômico e ambiental no território brasileiro uma vez que seu descarte é realizado majoritariamente em aterros sanitários. Utilizar esse resíduo como fonte geradora de energia, além de promover uma estratégia sustentável e eficiente de geração de energia limpa atua também como fonte de auxílio para o setor de saneamento básico. Desta forma, o trabalho objetivou avaliar o potencial energético do lodo de esgoto in natura e pirolisado através do Poder Calorífico Superior (PCS). Realizou-se uma pesquisa exploratória, laboratorial de natureza quantitativa. As análises foram realizadas em duplicata com o auxílio da bomba calorimétrica IKA C-200, sendo utilizados os valores médios obtidos de cada material. Analisando-se os resultados obtidos observou-se valores médios de 20,07 e 10,13 MJ.kg-1 para as amostras in natura e carbonizadas, respectivamente. Tais valores corroboram com os encontrados em literatura para materiais já consolidados na geração de energia como a madeira, por exemplo. Dessa forma, conclui-se que os resíduos de esgoto urbano podem ser destinados a utilização para fins energéticos com ênfase ao seu uso na forma direta in natura.
- 1 April 2025
- Published by Research, Society and Development in Research, Society and Development
- Vol. 14 (4)
Open AccessPotencial uso do lodo de esgoto urbano como fonte energética
O lodo de esgoto apresenta-se como um potencial problema econômico e ambiental no território brasileiro uma vez que seu descarte é realizado majoritariamente em aterros sanitários. Utilizar esse resíduo como fonte geradora de energia, além de promover uma estratégia sustentável e eficiente de geração de energia limpa atua também como fonte de auxílio para o setor de saneamento básico. Desta forma, o trabalho objetivou avaliar o potencial energético do lodo de esgoto in natura e pirolisado através do Poder Calorífico Superior (PCS). Realizou-se uma pesquisa exploratória, laboratorial de natureza quantitativa. As análises foram realizadas em duplicata com o auxílio da bomba calorimétrica IKA C-200, sendo utilizados os valores médios obtidos de cada material. Analisando-se os resultados obtidos observou-se valores médios de 20,07 e 10,13 MJ.kg-1 para as amostras in natura e carbonizadas, respectivamente. Tais valores corroboram com os encontrados em literatura para materiais já consolidados na geração de energia como a madeira, por exemplo. Dessa forma, conclui-se que os resíduos de esgoto urbano podem ser destinados a utilização para fins energéticos com ênfase ao seu uso na forma direta in natura.
- Open Access
- 1 March 2025
- Published by Research, Society and Development in Research, Society and Development
- Vol. 14 (3)
Qualidade superficial da madeira de massaranduba após lixamento com diferentes granulometrias
O lixamento é essencial para obter superfícies de madeira de alta qualidade, reduzindo imperfeições e preparando-as para acabamentos, resultando em maior durabilidade. O presente artigo teve por objetivo analisar a qualidade superficial da madeira de massaranduba por meio dos parâmetros de rugosidade Ra, Rq e Rz após o lixamento com diferentes granulometrias. Foram avaliados 50 corpos de prova submetidos ao lixamento com lixas de granulometrias 80, 120, 180, 220, 320, 400 e 600. A rugosidade foi medida com um rugosímetro de arraste (SURFTEST SJ-210) e analisada por ANOVA e teste de Scott-Knott (5% de significância) no software SISVAR. Os resultados mostraram que Ra e Rq seguiram o mesmo padrão, indicando que a lixa de 220 proporciona um acabamento superficial satisfatório. O parâmetro Rz apresentou um comportamento distinto, sugerindo que o melhor acabamento ocorre até a lixa de 400. Observou-se que a rugosidade diminuiu progressivamente com o lixamento. A sequência 80-120-180-220-320-400 demonstrou o melhor desempenho para todos os parâmetros estudados. Conclui-se que a sequência de lixamento até a lixa de 400 grãos é a mais indicada para a madeira de massaranduba, garantindo melhor qualidade superficial em todos os parâmetros avaliados.
- 1 March 2025
- Published by Research, Society and Development in Research, Society and Development
- Vol. 14 (3)
Open AccessQualidade superficial da madeira de massaranduba após lixamento com diferentes granulometrias
O lixamento é essencial para obter superfícies de madeira de alta qualidade, reduzindo imperfeições e preparando-as para acabamentos, resultando em maior durabilidade. O presente artigo teve por objetivo analisar a qualidade superficial da madeira de massaranduba por meio dos parâmetros de rugosidade Ra, Rq e Rz após o lixamento com diferentes granulometrias. Foram avaliados 50 corpos de prova submetidos ao lixamento com lixas de granulometrias 80, 120, 180, 220, 320, 400 e 600. A rugosidade foi medida com um rugosímetro de arraste (SURFTEST SJ-210) e analisada por ANOVA e teste de Scott-Knott (5% de significância) no software SISVAR. Os resultados mostraram que Ra e Rq seguiram o mesmo padrão, indicando que a lixa de 220 proporciona um acabamento superficial satisfatório. O parâmetro Rz apresentou um comportamento distinto, sugerindo que o melhor acabamento ocorre até a lixa de 400. Observou-se que a rugosidade diminuiu progressivamente com o lixamento. A sequência 80-120-180-220-320-400 demonstrou o melhor desempenho para todos os parâmetros estudados. Conclui-se que a sequência de lixamento até a lixa de 400 grãos é a mais indicada para a madeira de massaranduba, garantindo melhor qualidade superficial em todos os parâmetros avaliados.
- Open Access
- 1 February 2024
- Published by Research, Society and Development in Research, Society and Development
- Vol. 13 (2)
Determinação da sequência de lixamento ideal para a madeira do Freijó (Cordia goeldiana Huber) com finalidade de obter a melhor rugosidade superficial para fins de movelaria
The use of exotic species in commercial plantations is a reality in the current scenario of the Brazilian timber sector; however, there is limited utilization of the wide range of native species with productive potential for the same purpose. Therefore, studies are necessary to facilitate the introduction of native species in various timber-related fields, such as the furniture industry. One of the numerous species that stand out in this sector is Freijó (Cordia goeldiana Huber), as it possesses aesthetic and mechanical characteristics attractive for this purpose. Thus, the present study aims to evaluate characteristics that influence the surface quality of wood, including roughness. The parameters analyzed by the drag-type profilometer were Ra, Rq, and Rz after Freijó wood underwent treatment with abrasives of different grit sizes. The generated results were analyzed using the SISVAR statistical program, employing Completely Randomized Design (CRD), ANOVA, and the Scott-Knott Test, both at a 5% significance level. In conclusion, the recommendation is to use abrasives with grit sizes of 80 – 120 – 180 - 220, as they proved to be enough for achieving a surface that meets the requirements of the furniture industry.
- 1 February 2024
- Published by Research, Society and Development in Research, Society and Development
- Vol. 13 (2)
Open AccessDeterminação da sequência de lixamento ideal para a madeira do Freijó (Cordia goeldiana Huber) com finalidade de obter a melhor rugosidade superficial para fins de movelaria
The use of exotic species in commercial plantations is a reality in the current scenario of the Brazilian timber sector; however, there is limited utilization of the wide range of native species with productive potential for the same purpose. Therefore, studies are necessary to facilitate the introduction of native species in various timber-related fields, such as the furniture industry. One of the numerous species that stand out in this sector is Freijó (Cordia goeldiana Huber), as it possesses aesthetic and mechanical characteristics attractive for this purpose. Thus, the present study aims to evaluate characteristics that influence the surface quality of wood, including roughness. The parameters analyzed by the drag-type profilometer were Ra, Rq, and Rz after Freijó wood underwent treatment with abrasives of different grit sizes. The generated results were analyzed using the SISVAR statistical program, employing Completely Randomized Design (CRD), ANOVA, and the Scott-Knott Test, both at a 5% significance level. In conclusion, the recommendation is to use abrasives with grit sizes of 80 – 120 – 180 - 220, as they proved to be enough for achieving a surface that meets the requirements of the furniture industry.
- Open Access
- 1 October 2023
- Published by Research, Society and Development in Research, Society and Development
- Vol. 12 (10)
Avaliação do efeito de acabamento na rugosidade superficial da madeira de Paricá (Schizolobium amazonicum Huber ex Ducke)
Society's growing demand for wood products makes the search for knowledge about planted species increasingly indispensable, as they reduce the pressure exerted on native forests. In this way, the present work aimed to investigate characteristics of the roughness of Paricá wood (Schizolobium amazonicum), through the parameters Ra and Rz, after the pieces were subjected to the sanding process with sandpaper of different grain sizes, varying between 80 to 600 grains, to so allocate them to their best use. For this purpose, the drag roughness meter, model SURFTEST SJ-210, was used. The results obtained were analyzed using the SISVAR statistical program, where analysis of variance (ANOVA) and the Scott & Knott test were performed, both at 5% significance. In this way, the best roughness and surface finish was observed after the 80 – 120 – 220 – 400 grit sanding sequence. In this case, average values of 0.9222 μm and 4.6766 μm were obtained for the Ra and Rz parameters, respectively. Thus, it is concluded that Paricá wood, when properly treated, becomes a viable source for the production of laminated panels due to the low roughness values obtained, a fact that allows greater contact between the wooden sheets, also increasing the adhesion of glues and thus avoiding greater waste.
- 1 October 2023
- Published by Research, Society and Development in Research, Society and Development
- Vol. 12 (10)
Open AccessAvaliação do efeito de acabamento na rugosidade superficial da madeira de Paricá (Schizolobium amazonicum Huber ex Ducke)
Society's growing demand for wood products makes the search for knowledge about planted species increasingly indispensable, as they reduce the pressure exerted on native forests. In this way, the present work aimed to investigate characteristics of the roughness of Paricá wood (Schizolobium amazonicum), through the parameters Ra and Rz, after the pieces were subjected to the sanding process with sandpaper of different grain sizes, varying between 80 to 600 grains, to so allocate them to their best use. For this purpose, the drag roughness meter, model SURFTEST SJ-210, was used. The results obtained were analyzed using the SISVAR statistical program, where analysis of variance (ANOVA) and the Scott & Knott test were performed, both at 5% significance. In this way, the best roughness and surface finish was observed after the 80 – 120 – 220 – 400 grit sanding sequence. In this case, average values of 0.9222 μm and 4.6766 μm were obtained for the Ra and Rz parameters, respectively. Thus, it is concluded that Paricá wood, when properly treated, becomes a viable source for the production of laminated panels due to the low roughness values obtained, a fact that allows greater contact between the wooden sheets, also increasing the adhesion of glues and thus avoiding greater waste.