MPMike L. van de Poll

Mike L. van de Poll

*This is an algorithmically generated author record based on publicly available information.

Mike L. van de Poll has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Spatial Atomic Layer Deposition of IrO x Using (EtCp)Ir(CHD) and Atmospheric O 2 /N 2 Plasma

    by Mike L. van de Poll, Jie Shen, Paul Poodt, Fieke van Den Bruele, Wilhelmus M. M. Kessels, Bart Macco

    High-volume production of stable and affordable electrocatalysts is essential for the large-scale green hydrogen production using proton exchange membrane (PEM) water electrolysis. Iridium oxide (IrO x ) is a leading catalyst for the oxygen evolution reaction (OER) due to its high activity and stability in acidic conditions, but its cost and scarcity require strategies to minimize Ir usage. One promising approach is the deposition of ultrathin IrO x films on porous substrates using spatial atomic layer deposition (SALD), which offers precise thickness control, excellent conformality, combined with high throughput. In this work, a SALD IrO x process using (EtCp)­Ir­(CHD) and atmospheric O2/N2 plasma was developed. The process exhibits saturated growth with a growth-per-cycle of 0.66 Å at 150 °C. The impurity content in the films decreases sharply with increasing temperature between 80–150 °C, while metallic Ir clusters begin to form above ∼150–180 °C. Extended plasma exposure beyond saturation further reduces impurities and leads to denser, more crystalline films. Post-deposition anneal (PDA) in O2 atmosphere was shown to fully convert the deposited films into stoichiometric crystalline IrO2. Moreover, the conformality was studied on lateral high-aspect-ratio test structures and shown to be sufficient for depositions inside porous transport layers in PEM cells. Finally, the oxygen radical recombination probability on IrO x during the deposition was determined to be in the order of 10–3.


  • Open Access

    Plasma-Enhanced Spatial Atomic Layer Deposition on 2D and 3D Surface Topologies: The Case of Amorphous and Crystalline TiO2

    by Mike van de Poll, Jie Shen, James Hilfiker, Marcel Verheijen, Paul Poodt, Fieke van Den Bruele, Wilhelmus Kessels, Bart Macco

    Plasma-enhanced spatial ALD (PE-s-ALD) is an interesting technique for high-volume manufacturing of thin films at low-temperature. This technique is particularly appealing for conformal depositions on 3D surfaces for various applications, such as optical coatings, electrolyzers, and batteries. However, various crystallization and growth effects can influence the final film profile and properties, and understanding these effects and their interplay is key. This study investigates the complex growth mechanism of TiO2 using PE-s-ALD. TiO2 films are deposited on both planar and 3D substrates, while systematically varying the number of cycles, deposition temperature, and exposure times. Thickness, crystallinity, and composition are determined as a function of depth inside the structures. Conditions that result in the anatase phase on a planar surface only partially form this phase inside 3D structures, with the deepest part of the film being amorphous. This partial crystallization is ascribed to the film thickness inside the 3D structure gradually dropping below the critical thickness for crystallization. In turn, the partial crystallization is shown to have a significant effect on the resulting thickness profile, due to a difference in growth per cycle between the two phases. A framework of the interplay between effects is proposed, offering insights that enable better control of crystallinity and thickness throughout the entirety of coated surfaces of 3D structures by PE-s-ALD. Additionally, the recombination probability of oxygen radicals during this atmospheric-pressure PE-s-ALD process at 200 °C is determined to be 3 × 10-5. This value is similar to low-pressure PE-ALD, indicating that differences in conformality between the two types of ALD are not the result of differences in recombination probability, but rather of differences in initial radical density and diffusion behavior.


  • Open Access

    Bridging the gap between high-entropy alloys and metallic glasses: Control over disorder and mechanical properties of coatings

    by Alessandro Troglia, Cyrian Leriche, Mike L. van de Poll, Christoph Morscher, Gert H. Ten Brink, Bart J. Kooi, Bart Weber, Roland Bliem


  • Open Access

    Erratum: “Excellent conformality of atmospheric-pressure plasma-enhanced spatial atomic layer deposition with subsecond plasma exposure times” [Appl. Phys. Lett. 123, 182902 (2023)]

    by Mike L. van de Poll, Hardik Jain, James N. Hilfiker, Mikko Utriainen, Paul Poodt, Wilhelmus M. M. Kessels, Bart Macco

    The original article1 contains an error in Eq. (2). The correct equation2 is σi,j=πri+rj2. (2)The effect of this error is that the values of the specific scatte

  • Open Access

    Excellent conformality of atmospheric-pressure plasma-enhanced spatial atomic layer deposition with subsecond plasma exposure times

    by Mike L. van de Poll, Hardik Jain, James N. Hilfiker, Mikko Utriainen, Paul Poodt, Wilhelmus M. M. Kessels, Bart Macco

    Atmospheric-pressure spatial atomic layer deposition (s-ALD) has emerged as a scalable deposition technique combining the advantages of ALD with high deposition rates, suitable for low-cost and high-volume applications. There is a growing interest in atmospheric-pressure plasma-enhanced spatial ALD (PE-s-ALD), e.g., to allow for deposition at reduced temperatures or for materials that are otherwise difficult to prepare by thermal ALD. For low-pressure PE-ALD, conformal films on high aspect ratio features have been achieved despite plasma radical recombination, and the aspects influencing conformality are fairly well understood. This work addresses surface recombination and conformality for atmospheric-pressure PE-s-ALD films. We demonstrate that conformality can be achieved for SiO2 and TiO2 films deposited by atmospheric-pressure PE-s-ALD inside high-aspect-ratio trenches with short plasma exposure times. Using plasma exposure of 0.73 s results in conformal SiO2 and TiO2 films in structures with aspect ratios of 74 and 219, respectively. Additionally, the recombination probabilities of oxygen radicals at atmospheric pressure are extracted to be 4×10−4 for SiO2 and 6×10−5 for TiO2. These results demonstrate that atmospheric-pressure PE-s-ALD can be used for conformal and high-speed depositions on 3D substrates.


  • Open Access

    Soft deposition of TCOs by pulsed laser for high-quality ultra-thin poly-Si passivating contacts

    by Mike Tang Soo Kiong Ah Sen, Agnes Mewe, Jimmy Melskens, Jons Bolding, Mike van de Poll, Arthur Weeber

    In this work, the applicability of pulsed laser deposition (PLD) of transparent conductive oxides (TCOs) on high-quality ultra-thin poly-Si based passivating contacts is explored. Parasitic absorption caused by poly-Si layers can be minimized by reducing the poly-Si layer thickness. However, TCO deposition on poly-Si contacts, commonly by sputtering, results in severe deposition-induced damage and further aggravates the surface passivation for thinner poly-Si layers (<20 nm). Although a thermal treatment at elevated temperature (∼350 °C) can be used to partially repair the surface passivation quality, the contact resistivity severely increases due to the formation of a parasitic oxide layer at the poly-Si/ITO interface. Alternatively, we show that PLD TCOs can be used to mitigate the damage on ultra-thin (∼10 nm) poly-Si layers. Further improvement in poly-Si contact passivation can be achieved by increasing the deposition pressure while low contact resistivities (∼45 mΩ cm2) and good thermal stability (up to 350 °C) are achieved with a PLD indium-doped tin oxide (ITO) layer on high-quality ultra-thin poly-Si(n+) contacts. This allows for the application of a highly transparent front side contact by combining the excellent opto-electrical properties of a PLD ITO film with a 10 nm thin poly-Si contact.