Xinyi Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xinyi Li has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
Xinyu Tan
8 shared publicationsTing Xiao
7 shared publicationsLihua Jiang
6 shared publications- Xinyu Tan
Hubei Provincial Engineering Research Center for Solar Energy High-value Utilization and Green Conversion, Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion Materials, College of Materials and Chemical Engineering, China Three Gorges University, Yichang, PR China
6 shared publications - Lihua Jiang
China Three Gorges Univ, Coll Mat & Chem Engn, 8 Daxue Rd, Yichang 443002, Hubei, Peoples R China
4 shared publications Tao Hu
4 shared publications
Latest Publications
- 20 March 2026
- Published by World Scientific Pub Co Pte Ltd in Nano
Enhancement of mechanical robustness and anti-icing property of superhydrophobic coating through introducing interlock effect and high-aspect-ratio micro-scale structure using chemical etching method
Superhydrophobic coatings have been considered as promising candidates for anti-icing application in recent years. However, such coatings are easily damaged by mechanical loads due to their fragile micro/nano structures, and they are also prone to transit from the Cassie-Baxter to the Wenzel state during icing process, which greatly limits their lifespan. Herein, a superhydrophobic coating with a water contact angle of 152.5° and water sliding angle of 4° was prepared on aluminum substrate through chemical etching followed by spinning. The coating possesses high-aspect-ratio micro-protrusions and strong interlock with substrate, thereby endowing it with larger energy barrier for water impaling in rough structure, smaller heat losses with freezing droplet, superior protecting effect for nanostructure. Consequently, the coating exhibits enhanced anti-icing and mechanical robustness with a ~7.7-fold prolongation in freezing delay than the bare Al substrate and superior withstanding capacity in a series of tests. It can be expected that the coating has a promising prospect in the practical anti-icing applications owing to its straightforward fabrication, good mechanical robustness and excellent anti-icing property.
- 20 March 2026
- Published by World Scientific Pub Co Pte Ltd in Nano
Enhancement of mechanical robustness and anti-icing property of superhydrophobic coating through introducing interlock effect and high-aspect-ratio micro-scale structure using chemical etching method
Superhydrophobic coatings have been considered as promising candidates for anti-icing application in recent years. However, such coatings are easily damaged by mechanical loads due to their fragile micro/nano structures, and they are also prone to transit from the Cassie-Baxter to the Wenzel state during icing process, which greatly limits their lifespan. Herein, a superhydrophobic coating with a water contact angle of 152.5° and water sliding angle of 4° was prepared on aluminum substrate through chemical etching followed by spinning. The coating possesses high-aspect-ratio micro-protrusions and strong interlock with substrate, thereby endowing it with larger energy barrier for water impaling in rough structure, smaller heat losses with freezing droplet, superior protecting effect for nanostructure. Consequently, the coating exhibits enhanced anti-icing and mechanical robustness with a ~7.7-fold prolongation in freezing delay than the bare Al substrate and superior withstanding capacity in a series of tests. It can be expected that the coating has a promising prospect in the practical anti-icing applications owing to its straightforward fabrication, good mechanical robustness and excellent anti-icing property.
- 5 January 2026
- Published by Taylor & Francis in Nano Views
- Vol. 2  (1)
Anti-icing mechanism and application of superhydrophobic surface for power transmission lines
- 5 January 2026
- Published by Taylor & Francis in Nano Views
- Vol. 2  (1)
Anti-icing mechanism and application of superhydrophobic surface for power transmission lines
- 22 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41  (43) , 29288-29298
Triple-Scale Photothermal Superhydrophobic Anti/De-Icing Coating with Enhanced Mechanical Robustness and Chemical Stability via Introducing Low-Cost Green Petroleum Coke Particles
Icing can cause huge inconveniences in daily life and even safety problems. Constructing photothermal superhydrophobic coatings is considered as a promising strategy for inhibiting ice accretion due to their good passive anti-icing and active de-icing capability. However, such coatings usually involve high-cost photothermal materials, toxic fluorinated reagents, fragile nanostructures, and inferior chemical stability. This study proposes a novel strategy for fabricating a triple-scale photothermal superhydrophobic coating (TPSC) through a simple impregnation method using inexpensive green petroleum coke (GPC) particles (submillimeter scale) and nanoscale graphite (Gr) particles. The TPSC is superhydrophobic with a water contact angle of 160.3° and possesses an excellent photothermal property with a temperature increase of ∼42 °C under 80 mW/cm2 irradiation with sunlight. Owing to its superhydrophobicity, the freezing time of the TPSC is prolonged by a factor of 7.87 compared with that of bare aluminum. Benefiting from the excellent photothermal effect, an ice droplet on the coating can be melted within 180 s under 60 mW/cm2 irradiation with simulated sunlight. Furthermore, the incorporation of GPC not only effectively protects the embedded Gr particles within the microgrooves but also stabilizes the Cassie-Baxter state, thereby significantly enhancing the mechanical robustness and chemical stability of the TPSC. More importantly, this approach avoids the carbon emissions associated with the calcination of GPC, achieving an environmentally friendly and cost-effective application. This study can be expected to offer an efficient and sustainable anti-icing and de-icing strategy for outdoor equipment.
- 22 October 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41  (43) , 29288-29298
Triple-Scale Photothermal Superhydrophobic Anti/De-Icing Coating with Enhanced Mechanical Robustness and Chemical Stability via Introducing Low-Cost Green Petroleum Coke Particles
Icing can cause huge inconveniences in daily life and even safety problems. Constructing photothermal superhydrophobic coatings is considered as a promising strategy for inhibiting ice accretion due to their good passive anti-icing and active de-icing capability. However, such coatings usually involve high-cost photothermal materials, toxic fluorinated reagents, fragile nanostructures, and inferior chemical stability. This study proposes a novel strategy for fabricating a triple-scale photothermal superhydrophobic coating (TPSC) through a simple impregnation method using inexpensive green petroleum coke (GPC) particles (submillimeter scale) and nanoscale graphite (Gr) particles. The TPSC is superhydrophobic with a water contact angle of 160.3° and possesses an excellent photothermal property with a temperature increase of ∼42 °C under 80 mW/cm2 irradiation with sunlight. Owing to its superhydrophobicity, the freezing time of the TPSC is prolonged by a factor of 7.87 compared with that of bare aluminum. Benefiting from the excellent photothermal effect, an ice droplet on the coating can be melted within 180 s under 60 mW/cm2 irradiation with simulated sunlight. Furthermore, the incorporation of GPC not only effectively protects the embedded Gr particles within the microgrooves but also stabilizes the Cassie-Baxter state, thereby significantly enhancing the mechanical robustness and chemical stability of the TPSC. More importantly, this approach avoids the carbon emissions associated with the calcination of GPC, achieving an environmentally friendly and cost-effective application. This study can be expected to offer an efficient and sustainable anti-icing and de-icing strategy for outdoor equipment.
- 3 March 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41  (10) , 7016-7026
Electricity Driven Behavior and Self-Cleaning Property of Droplets on Superhydrophobic Anti-pollution Flashover Coating
The potential of superhydrophobic coatings for anti-pollution flashover should be further explored, focusing on droplet electrical behavior on surfaces. In this study, the electrically driven behavior of droplets on a horizontal superhydrophobic surface was experimentally examined. The characteristics of this behavior were compared and analyzed relative to RTV (room temperature vulcanized silicone rubber). The findings indicate that droplets exhibit a propensity to undergo a rolling motion in the direction of the electric field on superhydrophobic surfaces. The electric field strength at the critical motion state of droplets on the superhydrophobic surface is observed to decrease with an increase in the water contact angle (WCA) of the surface. Moreover, it exhibits a distinct volume effect whereby the electric field strength initially decreases and then increases as the droplet's volume increases. The distribution of the electric field around droplets on a superhydrophobic surface was simulated, and volume effect analysis was conducted on the electric propulsion of the droplet. Electric propulsion of water droplets can remove pollutants along their path, enhancing anti-pollution capabilities on superhydrophobic surfaces in power systems.
- 3 March 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41  (10) , 7016-7026
Electricity Driven Behavior and Self-Cleaning Property of Droplets on Superhydrophobic Anti-pollution Flashover Coating
The potential of superhydrophobic coatings for anti-pollution flashover should be further explored, focusing on droplet electrical behavior on surfaces. In this study, the electrically driven behavior of droplets on a horizontal superhydrophobic surface was experimentally examined. The characteristics of this behavior were compared and analyzed relative to RTV (room temperature vulcanized silicone rubber). The findings indicate that droplets exhibit a propensity to undergo a rolling motion in the direction of the electric field on superhydrophobic surfaces. The electric field strength at the critical motion state of droplets on the superhydrophobic surface is observed to decrease with an increase in the water contact angle (WCA) of the surface. Moreover, it exhibits a distinct volume effect whereby the electric field strength initially decreases and then increases as the droplet's volume increases. The distribution of the electric field around droplets on a superhydrophobic surface was simulated, and volume effect analysis was conducted on the electric propulsion of the droplet. Electric propulsion of water droplets can remove pollutants along their path, enhancing anti-pollution capabilities on superhydrophobic surfaces in power systems.
- 13 December 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 56
Superhydrophobic surface with good mechanical robustness and stable Cassie-Baxter state throughout freezing and thawing processes
- 13 December 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 56
Superhydrophobic surface with good mechanical robustness and stable Cassie-Baxter state throughout freezing and thawing processes
- 17 September 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 54
Superhydrophobic photothermal coatings based on polyurea for durable anti-icing and deicing
- 17 September 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 54
Superhydrophobic photothermal coatings based on polyurea for durable anti-icing and deicing
- 3 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16  (19) , 25498-25510
Experimental Study on Energy-Free Superhydrophobic Radiative Cooling Versatile Film with Enhanced Environmental Tolerance
Clean, energy-free methods of cooling are an effective way to respond to the global energy crisis. To date, cooling materials using passive daytime radiative cooling (RC) technology have been applied in the fields of energy-efficient buildings, solar photovoltaic cooling, and insulating textiles. However, RC materials frequently suffer from comprehensive damage to their microstructure, resulting in the loss of their initial cooling effect in complex outdoor environments. Here, a superhydrophobic daytime passive RC porous film with environmental tolerance (SRCP film) was fabricated, which integrated strong solar reflectivity (approximately 90%), mid-infrared emissivity (approximately 0.97), and superhydrophobicity (water contact angle (WCA) of 160° and sliding angle of 3°). This study revealed that SRCP film had an average reflectivity of 14.3% higher than SiO2 particles in the 0.3-2.5 μm wavelength region, achieving a cooling effect of 13.2 °C in ambient conditions with a solar irradiance of 946 W·m-2 and a relative humidity of 74% due to the synergistic effect of effective solar reflection and thermal infrared emission. In addition, empirical results showed that the attained films possessed outstanding environmental tolerance, maintaining high WCA (156°), stable cooling effect (8.3 °C), and low SiO2 loss (less than 5.1%) after 30 consecutive days of UV irradiation and 14 days of corrosion with acidic and alkaline solutions. More importantly, this work could be flexibly prepared by various methods without the use of any fluorine-containing reagents, which greatly widens the practical application scope.
- 3 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16  (19) , 25498-25510
Experimental Study on Energy-Free Superhydrophobic Radiative Cooling Versatile Film with Enhanced Environmental Tolerance
Clean, energy-free methods of cooling are an effective way to respond to the global energy crisis. To date, cooling materials using passive daytime radiative cooling (RC) technology have been applied in the fields of energy-efficient buildings, solar photovoltaic cooling, and insulating textiles. However, RC materials frequently suffer from comprehensive damage to their microstructure, resulting in the loss of their initial cooling effect in complex outdoor environments. Here, a superhydrophobic daytime passive RC porous film with environmental tolerance (SRCP film) was fabricated, which integrated strong solar reflectivity (approximately 90%), mid-infrared emissivity (approximately 0.97), and superhydrophobicity (water contact angle (WCA) of 160° and sliding angle of 3°). This study revealed that SRCP film had an average reflectivity of 14.3% higher than SiO2 particles in the 0.3-2.5 μm wavelength region, achieving a cooling effect of 13.2 °C in ambient conditions with a solar irradiance of 946 W·m-2 and a relative humidity of 74% due to the synergistic effect of effective solar reflection and thermal infrared emission. In addition, empirical results showed that the attained films possessed outstanding environmental tolerance, maintaining high WCA (156°), stable cooling effect (8.3 °C), and low SiO2 loss (less than 5.1%) after 30 consecutive days of UV irradiation and 14 days of corrosion with acidic and alkaline solutions. More importantly, this work could be flexibly prepared by various methods without the use of any fluorine-containing reagents, which greatly widens the practical application scope.
- 24 April 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40  (18) , 9449-9461
Substrate-Independent Superhydrophobic Coating Capable of Photothermal-Induced Repairability for Multiple Damages Fabricated via Simple Blade Coating
Repairable superhydrophobic surfaces have promising application potential in many fields. However, so far, it is still a challenge to develop a superhydrophobic surface with repairability for multiple types of damage through a simple method. In this paper, a repairable superhydrophobic coating was obtained on various substrates by blade-coating mixtures of polydimethylsiloxane (PDMS), polyvinylidene fluoride (PVDF), and multiwalled carbon nanotubes (MWCNTs) modified with dopamine (PDA) and octadecylamine (ODA). The obtained coating has a good liquid-repellent property with a water contact angle above 150° and a water sliding angle of ∼6° and possesses an excellent absorbance (∼97%) in the wavelength range of 250-2500 nm. Due to its high absorbance, the coating displays an outstanding photothermal effect with a temperature rise of ∼65 °C under irradiation by 1.0 kW/m2 of simulated sunlight. Furthermore, after being degraded by multiple stimuli, including plasma treatment, acid/alkali/oil immersion, sand impact, and the icing-thawing cycle, the coating can recover superhydrophobicity via sunlight irradiation, demonstrating the good photothermal-induced repairability of the coating. It can be expected that the good water-repellent property, photothermal effect, and repairability give this coating a promising prospect in practical applications.
- 24 April 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40  (18) , 9449-9461
Substrate-Independent Superhydrophobic Coating Capable of Photothermal-Induced Repairability for Multiple Damages Fabricated via Simple Blade Coating
Repairable superhydrophobic surfaces have promising application potential in many fields. However, so far, it is still a challenge to develop a superhydrophobic surface with repairability for multiple types of damage through a simple method. In this paper, a repairable superhydrophobic coating was obtained on various substrates by blade-coating mixtures of polydimethylsiloxane (PDMS), polyvinylidene fluoride (PVDF), and multiwalled carbon nanotubes (MWCNTs) modified with dopamine (PDA) and octadecylamine (ODA). The obtained coating has a good liquid-repellent property with a water contact angle above 150° and a water sliding angle of ∼6° and possesses an excellent absorbance (∼97%) in the wavelength range of 250-2500 nm. Due to its high absorbance, the coating displays an outstanding photothermal effect with a temperature rise of ∼65 °C under irradiation by 1.0 kW/m2 of simulated sunlight. Furthermore, after being degraded by multiple stimuli, including plasma treatment, acid/alkali/oil immersion, sand impact, and the icing-thawing cycle, the coating can recover superhydrophobicity via sunlight irradiation, demonstrating the good photothermal-induced repairability of the coating. It can be expected that the good water-repellent property, photothermal effect, and repairability give this coating a promising prospect in practical applications.