MLMengtao Liang

Mengtao Liang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mengtao Liang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Analysis and optimization of oil injection parameters for screw compressors based on RSM and NSGA-II

    by Guoao Chen, Huagen Wu, Delin Feng, Yishan Zhou, Yang Wang, Mengtao Liang, Ziwen Xing

    Oil-injected screw compressors use oil-injected lubrication and sealing. Compared with dry screw compressors, they reduce costs and improve performance and have been widely applied in the refrigeration and industrial gas fields. Firstly, a comprehensive mathematical model of the oil-injected twin-screw compressor was constructed, and an experimental platform for performance testing of the oil-injected twin-screw air compressor was established. The mathematical model was verified, and the accuracy of the simulation results was verified. Subsequently, the response surface models of oil injection volume, oil injection temperature, oil injection port position and back pressure were established by using the Box-Behnken method, and the interactions of oil injection volume, oil injection temperature, oil injection port position and back pressure with volumetric efficiency, adiabatic efficiency and specific power were analyzed. The results show that optimizing volumetric efficiency and adiabatic efficiency merely by adjusting the oil injection volume is contradictory. When optimizing performance, the oil injection temperature should be reduced as much as possible. Finally, the oil injection parameters of the oil-injected screw compressor were optimized by using the non-dominated sorting multi-objective genetic algorithm (NSGA-II), and the optimal oil injection parameters under different rotational speeds were obtained using the entropy-weighted TOPSIS (E-TOPSIS) method. The average volumetric efficiency of the optimized compressor has increased by 2.76%, the average adiabatic efficiency has increased by 3.39%, and the average specific power has decreased by 3.28%. This method effectively improves the performance of the twin-screw compressor.

  • Open Access

    Subwavelength metasurfaces for quasi-omnidirectional broadband sound absorption at low frequencies

    by Mengtao Liang, Huagen Wu, Martin Ibarias, José Sánchez-Dehesa


  • Research on thermal deformation and clearances of oil-free twin screw compressor under cryogenic conditions

    by Huagen Wu, Mengtao Liang, Siwei Chen, Guanghua Wu, Hongye Huang, Shuwu Xu, Ziwen Xing

    The oil-free twin screw compressors have obtained increasing attention in the field of boil off gas (BOG) recovery since they effectively reduce the power consumption and have higher reliability when recovering and boosting BOG. However, the thermal deformation of compressor under cryogenic operating conditions will lead to the change of clearance. The unidirectional thermal-fluid-solid coupling method is proposed in this paper to solve the problem and analyze the thermal deformation of compressor and the changes of each clearance caused by the deformation at different meshing angles in a meshing cycle. It is shown in the results that the deformation of twin screw compressor at low temperatures is a kind of cold shrinkage deformation. The combined effect of the deformation of various components has a significant influence on each clearance. Furthermore, it is reasonable to set the tooth tip clearance of the male rotor, suction end clearance and meshing gap as 0.3 mm, 1 mm and 0.3 mm respectively, which do not cause dangerous working conditions. Inappropriate clearance values lead to friction between parts in the local area. The simulated result of the dangerous friction area in twin screw compressor shows good agreement with the friction area in the compressor test. According to the simulation and test results, the tooth tip clearance of the female rotor is modified to 0.35 mm, and the discharge end clearance is adjusted to 0.1 mm. The results show that the modified compressor can working reliably. This study provides guidance for the design and processing of oil-free twin screw compressors employed in the situation of BOG recovery.


  • Simulated and Experimental Research on Highly Efficient Sound Absorption of Low‐Frequency Broadband Acoustic Metamaterial Based on Coiled‐Up Space

    by Mengtao Liang, Huagen Wu, Siwei Chen, Zeming Fu, Rongshan Zhang, Ziwen Xing

    Acoustic metamaterials are broadly employed in vibration and noise reduction fields for large defense industrial equipment such as engines and compressors thanks to their excellent subwavelength characteristics and extraordinary acoustic performance. However, the low‐frequency broadband sound absorption remains a thorny challenge in the scientific and engineering communities. This paper focuses on the low‐frequency broadband acoustic metamaterial composed of eight spiral absorbers coupled in two rows, researching its thermoviscous dissipation and sound absorption mechanism, and further analyzing its sound absorption characteristics. In the frequency range of 510–990 Hz, the average sound absorption coefficient of acoustic metamaterial with sound absorption area ratio of 2.72% reaches 0.80, and the cross‐sectional height is only 34 mm, which achieves the tradeoffs between structural thickness, frequency bandwidth and sound absorption performance. Furthermore, continuous and highly efficient broadband sound absorption within the target frequency band in practical applications can be achieved by optimizing adjustable parameters. In addition, finite element simulations are verified by experiments, which presents good agreement. Compared with traditional sound absorbing structure, the low‐frequency broadband acoustic metamaterial proposed in this paper owns the characteristics of small size and easy processing, which has broad application prospects in the field of low‐frequency noise control engineering.


  • Summary of Transceiver Isolation Technology for CW Radar Microstrip Antenna

    by Zhuangzhi Han, Yuzhu Wu, Mengtao Liang, Yuehong Ma, Xiaomin Li

    The leakage of transmitter signal seriously restricts the improvement of CW radar detection performance. Microstrip antenna is widely used in miniature CW radars, and its isolation performance is the key to restrict the detection ability of miniature CW radars. In this paper, the techniques of suppressing transmitter signal leakage in CW radar system are analyzed, including transceiver channel cancellation, signal processing, and antenna isolation technology, It is pointed out that the transmission and reception isolation of microstrip antennas is mainly realized by spatial isolation technology, including two types of spatial wave isolation and surface wave isolation. The principles, characteristics and applications of spatial wave isolation technology and surface wave isolation technology are analyzed in detail. Finally, it is pointed out that the main goal of increasing the transceiver isolation is to improve the sensitivity. It is difficult for a single technology to meet the requirements of isolation, and it is necessary to implement multiple methods based on the specific application.