Vasil Hristov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vasil Hristov has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Nely Georgieva
Department of Energy, Faculty of Technics and Technologies, Trakia University, 8600 Yambol, Bulgaria
5 shared publications - Petko Tsankov
Department of Energy, Faculty of Technics and Technologies, Trakia University, 8600 Yambol, Bulgaria
5 shared publications Nely Georgieva
3 shared publicationsKalin Kirov
2 shared publicationsPetko Tsankov
2 shared publications- Svetoslav Atanasov
Department of Electrical Engineering, Automation, Computer Systems and Communications, Trakia University, 8600 Yambol, Bulgaria
2 shared publications
Latest Publications
- Open Access
Design of Real-Time Browser-Based Platform for Thermohydraulic Characterization of a Laboratory Heat Exchanger Using PolyVR
This paper presents a real-time browser-based platform for thermohydraulic characterization of a compact laboratory heating system, developed using the PolyVR research-grade virtual reality engine. Experimental measurements are retrieved at 1 Hz from a cloud-based database and processed via browser-native computational framework that continuously performs thermophysical modeling, hydraulic analysis and energy balance evaluation. The system calculates the rate of heat transfer (), overall heat transfer coefficient (), dimensionless numbers (), pump performance, heater efficiency and cumulative thermal energy. PolyVR provides the immersive environment in which the partial digital twin functionality is integrated alongside the browser-based thermohydraulic calculations. The whole system includes support for animations regarding flow diagrams, valve state indicators, thermal field visualization and manipulation of system elements. The system architecture is designed to work on desktops, head-mounted devices, as well as in CAVE (cave automatic virtual environment) systems with remote connection made possible via using ngrok tunnels. The experiments were separated into three categories (steady-state, dynamic and validation). Steady-state and dynamic datasets show that the browser computation with PolyVR achieves high-fidelity thermohydraulic analysis similar to that done in laboratory settings. The steady-state and transient datasets illustrate that browser-based computation provides highly accurate thermohydraulic simulation close to that of the laboratory reference computations. For all experiments performed on the platform, the deviation of measurements does not exceed 0.5 in temperature, 5 in flow rate and 1 in pressure. The energy balance is closed with a deviation of 2–3.Open AccessDesign of Real-Time Browser-Based Platform for Thermohydraulic Characterization of a Laboratory Heat Exchanger Using PolyVR
This paper presents a real-time browser-based platform for thermohydraulic characterization of a compact laboratory heating system, developed using the PolyVR research-grade virtual reality engine. Experimental measurements are retrieved at 1 Hz from a cloud-based database and processed via browser-native computational framework that continuously performs thermophysical modeling, hydraulic analysis and energy balance evaluation. The system calculates the rate of heat transfer (), overall heat transfer coefficient (), dimensionless numbers (), pump performance, heater efficiency and cumulative thermal energy. PolyVR provides the immersive environment in which the partial digital twin functionality is integrated alongside the browser-based thermohydraulic calculations. The whole system includes support for animations regarding flow diagrams, valve state indicators, thermal field visualization and manipulation of system elements. The system architecture is designed to work on desktops, head-mounted devices, as well as in CAVE (cave automatic virtual environment) systems with remote connection made possible via using ngrok tunnels. The experiments were separated into three categories (steady-state, dynamic and validation). Steady-state and dynamic datasets show that the browser computation with PolyVR achieves high-fidelity thermohydraulic analysis similar to that done in laboratory settings. The steady-state and transient datasets illustrate that browser-based computation provides highly accurate thermohydraulic simulation close to that of the laboratory reference computations. For all experiments performed on the platform, the deviation of measurements does not exceed 0.5 in temperature, 5 in flow rate and 1 in pressure. The energy balance is closed with a deviation of 2–3. - Open Access
- 17 July 2026
- Published by MDPI AG in Preprints.org
Design of Real-Time Browser Based Platform for Thermal Hydraulic Characterization of a Laboratory Heat Exchanger Using PolyVR
This paper presents a real-time browser-based platform for thermal‑hydraulic characteri-zation of a compact laboratory heat exchanger, implemented within the PolyVR re-search‑grade virtual reality engine. Experimental measurements—including temperature, flow rate, pressure, and electrical quantities—are retrieved from a cloud database at 1 Hz and processed through a browser‑native computational framework that performs contin-uous thermophysical modeling, hydraulic analysis, and energy‑balance evaluation. The system computes heat‑transfer rate, overall heat‑transfer coefficient, Reynolds, Prandtl, Nusselt, and Grashof numbers, pump performance, heater efficiency, and cumulative thermal energy. PolyVR serves as the runtime environment for the digital twin, providing modular integration of browser‑based computation with immersive 3D visualization. The platform supports animated flow diagrams, valve‑state indicators, thermal‑field moni-toring, and interactive manipulation of system components. Its scalable architecture ena-bles deployment across desktops, head‑mounted displays, and CAVE environments, with remote access facilitated through ngrok tunneling. Experimental validation using steady‑state and dynamic datasets demonstrates that the PolyVR‑enabled browser com-putation reproduces laboratory‑grade thermal‑hydraulic analysis with high fidelity, ena-bling accessible remote experimentation, immersive visualization of invisible thermal processes, and VR‑based digital‑twin interaction.
- 17 July 2026
- Published by MDPI AG in Preprints.org
Open AccessDesign of Real-Time Browser Based Platform for Thermal Hydraulic Characterization of a Laboratory Heat Exchanger Using PolyVR
This paper presents a real-time browser-based platform for thermal‑hydraulic characteri-zation of a compact laboratory heat exchanger, implemented within the PolyVR re-search‑grade virtual reality engine. Experimental measurements—including temperature, flow rate, pressure, and electrical quantities—are retrieved from a cloud database at 1 Hz and processed through a browser‑native computational framework that performs contin-uous thermophysical modeling, hydraulic analysis, and energy‑balance evaluation. The system computes heat‑transfer rate, overall heat‑transfer coefficient, Reynolds, Prandtl, Nusselt, and Grashof numbers, pump performance, heater efficiency, and cumulative thermal energy. PolyVR serves as the runtime environment for the digital twin, providing modular integration of browser‑based computation with immersive 3D visualization. The platform supports animated flow diagrams, valve‑state indicators, thermal‑field moni-toring, and interactive manipulation of system components. Its scalable architecture ena-bles deployment across desktops, head‑mounted displays, and CAVE environments, with remote access facilitated through ngrok tunneling. Experimental validation using steady‑state and dynamic datasets demonstrates that the PolyVR‑enabled browser com-putation reproduces laboratory‑grade thermal‑hydraulic analysis with high fidelity, ena-bling accessible remote experimentation, immersive visualization of invisible thermal processes, and VR‑based digital‑twin interaction.
- Open Access
- 15 December 2023
- Published by MDPI AG in Preprints.org
Did the Pandemic Affect the Quality and Level of Knowledge and Performance (Case Study)
The pandemic was an enormous experience all over the world. The type of living, working and study were changed irreversibly. Facing the opportunity to establish old frames of education in universities is impossible. The adoption of new ways of teaching and assessments reveal their convenience and in the same way their weak points. In response to that stage, on 14 December 2022, the EU parliament accepted the "Digital Decade Policy Programme 2030", for the establishment of a digital transformation community (EU 2022). Trakia University had an online assessment system, quizzes for self-training, and final exams, developed in 2008 on Moodle virtual learning environment. During the pandemic, online exams and lectures were conducted using platforms like BigBlueButton in Moodle or Google Meets. The article gives the results of online exams before, during, and after the pandemic. The outcome, without doubt, displays the lowering knowledge level or performance during the social isolation due to COVID-19, and after, and the reasons are discussed. During the second year of the pandemic was mentioned also a high dropout of students. Now the situation is returning to the previous levels, before the pandemic, but the quality of education is not yet reached. The article values the grades results of session exams and has the intention to clarify the influence of the pandemic period on the excellence of high institution education.
- 15 December 2023
- Published by MDPI AG in Preprints.org
Open AccessDid the Pandemic Affect the Quality and Level of Knowledge and Performance (Case Study)
The pandemic was an enormous experience all over the world. The type of living, working and study were changed irreversibly. Facing the opportunity to establish old frames of education in universities is impossible. The adoption of new ways of teaching and assessments reveal their convenience and in the same way their weak points. In response to that stage, on 14 December 2022, the EU parliament accepted the "Digital Decade Policy Programme 2030", for the establishment of a digital transformation community (EU 2022). Trakia University had an online assessment system, quizzes for self-training, and final exams, developed in 2008 on Moodle virtual learning environment. During the pandemic, online exams and lectures were conducted using platforms like BigBlueButton in Moodle or Google Meets. The article gives the results of online exams before, during, and after the pandemic. The outcome, without doubt, displays the lowering knowledge level or performance during the social isolation due to COVID-19, and after, and the reasons are discussed. During the second year of the pandemic was mentioned also a high dropout of students. Now the situation is returning to the previous levels, before the pandemic, but the quality of education is not yet reached. The article values the grades results of session exams and has the intention to clarify the influence of the pandemic period on the excellence of high institution education.
- Open Access
- 19 September 2023
- Published by State Scientific and Technical Center for Nuclear and Radiation Safety in Nuclear and Radiation Safety
- No. 3(99),p. 31-42
Application of Immersive Virtual Reality in the Non-Renewable Energy Industry Area
The Immersive Virtual Reality (VR) has the potential to significantly enhance the non-renewable energy (NRE) industry by improving safety and efficiency in operational and training processes. In order to explore applications of immersive technologies aimed at enhancing processes within the NRE energy sectors, a systematic review of the literature published in the last decade was conducted. Utilizing the PRISMA framework with snowballing, a collection of 53 articles was acquired, and subsequent examination based on indicators such as the energy industry sector, VR application use cases, and employed VR technologies (both hardware and software) revealed that only a limited number of studies (16 out of 53) met the eligibility criteria. The results revealed that in 94% of the publications, immersive VR technologies are utilized for training purposes. This research provides valuable insights and knowledge to stakeholders in the NRE industry, including companies, policymakers, and researchers, who can utilize the findings to implement immersive virtual reality technologies for complex simulations and remote operations.
- 19 September 2023
- Published by State Scientific and Technical Center for Nuclear and Radiation Safety in Nuclear and Radiation Safety
- No. 3(99),p. 31-42
Open AccessApplication of Immersive Virtual Reality in the Non-Renewable Energy Industry Area
The Immersive Virtual Reality (VR) has the potential to significantly enhance the non-renewable energy (NRE) industry by improving safety and efficiency in operational and training processes. In order to explore applications of immersive technologies aimed at enhancing processes within the NRE energy sectors, a systematic review of the literature published in the last decade was conducted. Utilizing the PRISMA framework with snowballing, a collection of 53 articles was acquired, and subsequent examination based on indicators such as the energy industry sector, VR application use cases, and employed VR technologies (both hardware and software) revealed that only a limited number of studies (16 out of 53) met the eligibility criteria. The results revealed that in 94% of the publications, immersive VR technologies are utilized for training purposes. This research provides valuable insights and knowledge to stakeholders in the NRE industry, including companies, policymakers, and researchers, who can utilize the findings to implement immersive virtual reality technologies for complex simulations and remote operations.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2928 (1) , 070003
Application of additive technologies as resource-saving technologies
Until recently the additive manufacturing (AM) was seen only as a design and testing tool but in the recent years it has become a regular manufacturing operatio
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2928 (1) , 070003
Open AccessApplication of additive technologies as resource-saving technologies
Until recently the additive manufacturing (AM) was seen only as a design and testing tool but in the recent years it has become a regular manufacturing operatio
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2889 (1)
Experimental study and analysis of linear hydraulic losses in pipelines during gas flow medium pressure
The design and optimization of gas systems is related to their hydraulic calculation. This article discusses the issue related to the hydraulic sizing of pneumatic and gas systems operating at medium pressures - pabs = 2… 5 bar, also defined as gas flows of compressible fluid. An overview of the classical theory, applied methods and models for the hydraulic sizing of the pipe networks during the movement of compressible fluids has been made. A methodology and a corresponding laboratory stand for research of such gas flows have been developed. Experimental results were obtained in determining the coefficient of linear resistance to the motion of a compressible fluid. A comparative analysis of the flows of "compressible - incompressible" gas has been made. The results regarding: the coefficient of linear resistance and its connection with the Reynolds number and the relative roughness of the pipeline have been confirmed and specified; the distribution of gas pressure along the pipeline during the flow of a compressible fluid. The specificity of the experimental work lies in the study of the movement of gas in small diameter pipelines, which allows both scientific and educational-laboratory and demonstration research.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2889 (1)
Open AccessExperimental study and analysis of linear hydraulic losses in pipelines during gas flow medium pressure
The design and optimization of gas systems is related to their hydraulic calculation. This article discusses the issue related to the hydraulic sizing of pneumatic and gas systems operating at medium pressures - pabs = 2… 5 bar, also defined as gas flows of compressible fluid. An overview of the classical theory, applied methods and models for the hydraulic sizing of the pipe networks during the movement of compressible fluids has been made. A methodology and a corresponding laboratory stand for research of such gas flows have been developed. Experimental results were obtained in determining the coefficient of linear resistance to the motion of a compressible fluid. A comparative analysis of the flows of "compressible - incompressible" gas has been made. The results regarding: the coefficient of linear resistance and its connection with the Reynolds number and the relative roughness of the pipeline have been confirmed and specified; the distribution of gas pressure along the pipeline during the flow of a compressible fluid. The specificity of the experimental work lies in the study of the movement of gas in small diameter pipelines, which allows both scientific and educational-laboratory and demonstration research.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2889 (1)
Research of the heat transfer coefficient in different connection schemes for radiators
Increasing the energy efficiency in the residential and public buildings is an object of observation and impact not only on national level but also on international as well. In the recent years a number of normative documents, measurements for support and financing in this direction have been accepted in Bulgaria. According to Eurostat’s data, the buildings and more especially the residential buildings are the one which have the highest energy consumption in the EU, followed by the transport and industry sectors. The households are the sector with the greatest potential for energy savings in Europe, for them 79% of the total energy consumption is due to the heating and the hot water mainly. The energy savings from building renovations are usually result from improvement of the insulation, heating and cooling systems and electric light. In the present article an experimental study was made to establish the dependence of the heat transfer coefficient in the different schemes of connections on the radiators in order to optimize it and achieving more complete absorption of the supplied heat energy. This research was made within the student’s thesis and to carry it out an operating installation was used in the laboratory of “Heating engineering” at the Faculty of “Technics and Technology” – Yambol. The realized connection schemes of the radiators in the experiments are “up-down” and “down-up”. The methology includes monitoring the ambient temperature, regulating the power of the electric heaters of the heating source, taking into account the inlet and outlet temperatures and the temperature profile of the radiators. Based on the obtained results and done analysis, conclusions for increasing the energy efficiency of a specific radiator by changing the scheme of its connection to the heating network have been formulated.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2889 (1)
Open AccessResearch of the heat transfer coefficient in different connection schemes for radiators
Increasing the energy efficiency in the residential and public buildings is an object of observation and impact not only on national level but also on international as well. In the recent years a number of normative documents, measurements for support and financing in this direction have been accepted in Bulgaria. According to Eurostat’s data, the buildings and more especially the residential buildings are the one which have the highest energy consumption in the EU, followed by the transport and industry sectors. The households are the sector with the greatest potential for energy savings in Europe, for them 79% of the total energy consumption is due to the heating and the hot water mainly. The energy savings from building renovations are usually result from improvement of the insulation, heating and cooling systems and electric light. In the present article an experimental study was made to establish the dependence of the heat transfer coefficient in the different schemes of connections on the radiators in order to optimize it and achieving more complete absorption of the supplied heat energy. This research was made within the student’s thesis and to carry it out an operating installation was used in the laboratory of “Heating engineering” at the Faculty of “Technics and Technology” – Yambol. The realized connection schemes of the radiators in the experiments are “up-down” and “down-up”. The methology includes monitoring the ambient temperature, regulating the power of the electric heaters of the heating source, taking into account the inlet and outlet temperatures and the temperature profile of the radiators. Based on the obtained results and done analysis, conclusions for increasing the energy efficiency of a specific radiator by changing the scheme of its connection to the heating network have been formulated.