SASalman Alfihed

Salman Alfihed

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Salman Alfihed has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effects of Process Parameters on Pulsed Laser Micromachining for Glass-Based Microfluidic Devices

    by Mrwan Alayed, Nojoud Al Fayez, Salman Alfihed, Naif Alshamrani, Fahad Alghannam

    Glass-based microfluidic devices are essential for applications such as diagnostics and drug discovery, which utilize their optical clarity and chemical stability. This review systematically analyzes pulsed laser micromachining as a transformative technique for fabricating glass-based microfluidic devices, addressing the limitations of conventional methods. By examining three pulse regimes—long (≥nanosecond), short (picosecond), and ultrashort (femtosecond)—this study evaluates how laser parameters (fluence, scanning speed, pulse duration, repetition rate, wavelength) and glass properties influence ablation efficiency and quality. A higher fluence improves the material ablation efficiency across all the regimes but poses risks of thermal damage or plasma shielding in ultrashort pulses. Optimizing the scanning speed balances the depth and the surface quality, with slower speeds enhancing the channel depth but requiring heat accumulation mitigation. Shorter pulses (femtosecond regime) achieve greater precision (feature resolution) and minimal heat-affected zones through nonlinear absorption, while long pulses enable rapid deep-channel fabrication but with increased thermal stress. Elevating the repetition rate improves the material ablation rates but reduces the surface quality. The influence of wavelength on efficiency and quality varies across the three pulse regimes. Material selection is critical to outcomes and potential applications: fused silica demonstrates a superior surface quality due to low thermal expansion, while soda–lime glass provides cost-effective prototyping. The review emphasizes the advantages of laser micromachining and the benefits of a wide range of applications. Future directions should focus on optimizing the process parameters to improve the efficiency and quality of the produced devices at a lower cost to expand their uses in biomedical, environmental, and quantum applications.


  • Top Cited Papers
    Open Access

    Recent Progress in PDMS-Based Microfluidics Toward Integrated Organ-on-a-Chip Biosensors and Personalized Medicine

    by Fahad Alghannam, Mrwan Alayed, Salman Alfihed, Mahmoud A. Sakr, Dhaifallah Almutairi, Naif Alshamrani, Nojoud Al Fayez

    The organ-on-a-chip (OoC) technology holds significant promise for biosensors and personalized medicine by enabling the creation of miniature, patient-specific models of human organs. This review studies the recent advancements in the application of polydimethylsiloxane (PDMS) microfluidics for OoC purposes. It underscores the main fabrication technologies of PDMS microfluidic systems, such as photolithography, injection molding, hot embossing, and 3D printing. The review also highlights the crucial role of integrated biosensors within OoC platforms. These electrochemical, electrical, and optical sensors, integrated within the microfluidic environment, provide valuable insights into cellular behavior and drug response. Furthermore, the review explores the exciting potential of PDMS-based OoC technology for personalized medicine. OoC devices can forecast drug effectiveness and tailor therapeutic strategies for patients by incorporating patient-derived cells and replicating individual physiological variations, helping the healing process and accelerating recovery. This personalized approach can revolutionize healthcare by offering more precise and efficient treatment options. Understanding OoC fabrication and its applications in biosensors and personalized medicine can play a pivotal role in future implementations of multifunctional OoC biosensors.


  • Open Access

    Recent Advances in Black Silicon Surface Modification for Enhanced Light Trapping in Photodetectors

    by Abdulrahman Alsolami, Hadba Hussain, Radwan Noor, Nourah AlAdi, Nada Almalki, Abdulaziz Kurdi, Thamer Tabbakh, Adnan Zaman, Salman Alfihed, Jing Wang

    The intricate nanostructured surface of black silicon (BSi) has advanced photodetector technology by enhancing light absorption. Herein, we delve into the latest advancements in BSi surface modification techniques, specifically focusing on their profound impact on light trapping and resultant photodetector performance improvement. Established methods such as metal-assisted chemical etching, electrochemical etching, reactive ion etching, plasma etching, and laser ablation are comprehensively analyzed, delving into their mechanisms and highlighting their respective advantages and limitations. We also explore the impact of BSi on the emerging applications in silicon (Si)-based photodetectors, showcasing their potential for pushing the boundaries of light-trapping efficiency. Throughout this review, we critically evaluate the trade-offs between fabrication complexity and performance enhancement, providing valuable insights for future development in this rapidly evolving field. This knowledge on the BSi surface modification and its applications in photodetectors can play a crucial role in future implementations to substantially boost light trapping and the performance of Si-based optical detection devices consequently.


  • Influence of SU-8 curing parameters on the terahertz absorption characteristics

    by Salman Alfihed, Dhaifallah Almutairi, Abdullah Alharbi, Yaser A. AlShetwi, Hadba Hussain, Mohammed Alhamdan, Ali Alanzi, Ibraheem Al-Naib


  • Open Access

    Optimizing the Indium Tin Oxide Layer Characteristics toward a Low-Cost Dust-Cleaning Process for Solar Panels

    by Salman Alfihed, Reema Abdulaziz Altuwaijri, Sara Ahmed Alsalman, Adnan Zaman, Shaeen Kalathil

    The deposition of dust particles on solar panel modules constitutes a significant challenge, leading to a potential reduction in solar cell performance. This work tackles this issue by investigating the surface modification of a layer of transparent indium tin oxide (ITO), with a detailed analysis of the influence of its characteristics via different annealing conditions/processing. The ITO layer has been studied to enhance its characteristics for dust removal applications. Of particular note is that the developed ITO layer can be applied to dust removal using electrostatic or magnetic-based approaches. Thus, the correlation between annealing gas (using Argon, Oxygen, and Nitrogen), annealing temperature, and annealing ramping rate is explored with the obtained surface topography, as well as electrical and optical properties. The developed ITO layers annealed in the Argon medium at 600°C with an annealing ramping rate of 50°C/s showed smooth surface roughness, the highest electrical conductivity, and a relatively low refractive index. Such findings can play a crucial role in the future implementation of using the enhanced ITO layer for dust mitigation in solar panels, thus improving their long-term performance.

  • Open Access

    Non-Invasive Brain Sensing Technologies for Modulation of Neurological Disorders

    by Salman Alfihed, Majed Majrashi, Muhammad Ansary, Naif Alshamrani, Shahad H. Albrahim, Abdulrahman Alsolami, Hala A. Alamari, Adnan Zaman, Dhaifallah Almutairi, Abdulaziz Kurdi, et al.

    The non-invasive brain sensing modulation technology field is experiencing rapid development, with new techniques constantly emerging. This study delves into the field of non-invasive brain neuromodulation, a safer and potentially effective approach for treating a spectrum of neurological and psychiatric disorders. Unlike traditional deep brain stimulation (DBS) surgery, non-invasive techniques employ ultrasound, electrical currents, and electromagnetic field stimulation to stimulate the brain from outside the skull, thereby eliminating surgery risks and enhancing patient comfort. This study explores the mechanisms of various modalities, including transcranial direct current stimulation (tDCS) and transcranial magnetic stimulation (TMS), highlighting their potential to address chronic pain, anxiety, Parkinson’s disease, and depression. We also probe into the concept of closed-loop neuromodulation, which personalizes stimulation based on real-time brain activity. While we acknowledge the limitations of current technologies, our study concludes by proposing future research avenues to advance this rapidly evolving field with its immense potential to revolutionize neurological and psychiatric care and lay the foundation for the continuing advancement of innovative non-invasive brain sensing technologies.


  • Open Access

    A critical perspective for emerging ultra-thin solar cells with ultra-high power-per-weight outputs

    by Apostolos Panagiotopoulos, Temur Maksudov, George Kakavelakis, George Perrakis, Essa A. Alharbi, Dimitar Kutsarov, Furkan H. Isikgor, Salman Alfihed, Konstantinos Petridis, Maria Kafesaki, et al.

    Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective explores the literature of emerging PVs and highlights the maximum reported PPW values of perovskite solar cells (PSCs) 29.4 W/g, organic solar cells (OSCs) 32.07 W/g, and quantum dot solar cells 15.02 W/g, respectively. The record PPW values of OSCs and PSCs are approximately one order of magnitude higher compared to their inorganic ultrathin solar cells counterparts (approximately 3.2 W/g for CIGS and a-Si). This consists emerging PVs, very attractive for a variety of applications where the PPW is the key parameter. In particular, both OSCs and PSCs can be implemented in different scenarios of applications (indoor and biocompatible applications for OSCs and outdoor and high-energy radiation conversion conditions for the PSCs) due to their unique optoelectronic and physiochemical properties. Finally, our theoretical optical and electrical simulation and optimization study for the most promising and well-suited PV technologies showed an impressive maximum realistic theoretical PPW limit of 74.3 and 93.7 W/g for PSCs and OSCs, respectively. Our finding in the theoretical section shows that the experimental results achieved in the literature of PSCs and OSCs toward high PPW outputs is not quite close to the theoretical maximum (35% and 40% of the theoretical maximum for OSCs and PSCs, respectively), and thus, more work needs to be done to further increase the experimental PPW output of these promising PV technologies.


  • Open Access

    Two-Dimensional Materials for Terahertz Emission

    by Abdullah Alharbi, Naif Alshamrani, Hadba Hussain, Mohammed Alhamdan, Salman Alfihed

    The demand for ultrahigh-speed, lightweight, low-cost, and defect-tolerant electronic devices drives the industry to switch to terahertz (THz) technologies. The use of two-dimensional (2D) materials has massively increased in THz applications due to their appealing electronic and optoelectronic properties, including tunable bandgap, high carrier mobility, wideband optical absorption, and relatively short carrier lifetime. Several 2D-material-based emitters, modulators, and detectors have been fabricated and examined. In this context, considerable research has been going on for 2D-material-based THz emitting sources, including materials and device structure to understand the electronics and optoelectronics mechanisms occurring in the THz region. This chapter focuses on the 2D-material-based emitters with insights into the background, the physical principle of photoconductive THz emitters, the 2D materials’ properties, and the research trends in the fabrication and characterization of the THz sources based upon 2D materials.


  • Open Access

    Detailed Study of the Correlation between Cross-Linking of Thick SU-8 and UV–NIR Optical Transmission/Photoluminescence Spectroscopy

    by Abdullah Alharbi, Dhaifallah Almutairi, Hadba Hussain, Salman Alfihed

    SU-8 polymers are promising materials for various applications due to their low cost, excellent thermal stability, and outstanding mechanical properties. Cross-linking of SU-8 is a crucial process that determines the properties of the materials. This study investigates the effect of cross-linking of free-standing SU-8 films on optical transmission and PL emission under various curing conditions. Our findings show that an increase in the cross-linking density reduces optical transmission and causes a red shift of the PL emission band peaks. By directly measuring the optical response of the isolated SU-8, we remove any uncertainty due to the substrate’s presence. Moreover, we show that optical transmission and PL spectroscopy are two non-distractive techniques that can be employed to monitor the curing of the SU-8. This finding enhances our understanding of the cross-linking process in SU-8 and paves the way to further enhance the properties of the SU-8 polymer for various electronics and optoelectronics applications.


  • Open Access

    Broadband Terahertz Emission from Photoconductive Devices

    by Salman Alfihed, Abdullah Alharbi

    This chapter explores the terahertz (THz) emission from biased semiconductor photoconductive devices. The photoconductive device is an optoelectronic device that is able to emit broadband THz radiation under the optical excitation, by an ultrafast laser, in the existence of a bias field. This chapter explains the basic principle of photoconductive devices with focusing on the main device components, being the photoconductive material and the photoconductive structure. Then, various materials and structures are discussed toward improving the performance of the photoconductive THz emitters. Furthermore, the main limitations and considerations are presented with insight into the different saturation and screening effects due to the bias field and pump fluence. Ultimately, the recent advances and studies of photoconductive THz emitters are presented in terms of material and structure, including the quantum dots, the nanostructure, the use of dielectric materials, and the grating structure on the photoconductive surfaces.