LGLaurent Gerbaud

Laurent Gerbaud

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Laurent Gerbaud has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Nonlinear Hybrid Model for Permanent Magnet Synchronous Machines Including Magnet Permeability and Efficient Coupling

    by João Vitor Gerevini Kasper, Christian Chillet, Thiago de Paula Machado Bazzo, Laurent Gerbaud, Patrick Kuo-Peng

    The paper presents a computationally efficient nonlinear hybrid model for the analysis of surface-mounted permanent magnet machines under load conditions, aimed at preliminary design and optimization. The proposed model takes into account the magnetic saturation through equivalent current sheets expressed by Fourier series. It combines analytical models with a reluctance network to accurately predict the magnetic flux densities, flux linkage, on-load voltage, and torque ripple under load. The proposed model represents the magnetic field generated by the stator windings and the stator saturation effects taking into account the permanent magnet permeability. A novel coupling method between the analytical models and the reluctance network is introduced to simplify the overall formulation and reduce computational costs. Furthermore, the model is fully differentiable, enabling its use with deterministic optimization algorithms. Validations with finite element analysis demonstrate excellent agreement and enhanced accuracy compared to existing methods, while achieving comparable or improved computational efficiency.

  • Open Access

    Multi-Static Reluctance Network With Constant Topology and Fixed Air Gap Parameters Applied to PMSG

    by João Vitor Gerevini Kasper, Pedro Tavares Silva Parreira De Azevedo, Laurent Gerbaud, Ângela Paula Barbosa Da Silva Ferreira, Patrick Kuo-Peng, Thiago de Paula Machado Bazzo

    Multi-static reluctance networks (MRN) have been widely used to model the magnetic behavior of Permanent Magnet Synchronous Generators (PMSG), enabling the representation of rotor motion. However, existing MRN approaches face limitations, as variable-reluctance methods may yield inaccurate local flux distributions and torque ripple, whereas mesh-based MRN with node reconnection are computationally expensive and strongly dependent on air gap discretization. To overcome these challenges, this work proposes a new MRN methodology that requires neither element reconnection nor air gap reluctance adjustment. Rotor motion is modeled by varying the magnetomotive force (MMF) of surface-mounted permanent magnets (PM) while keeping the network topology fixed. The proposed approach shows good agreement with numerical reference results for linkage flux, terminal voltage, and accurately predicts the on-load torque ripple when compared with FEM results, with deviations for the main electromagnetic quantities remaining below 2.6%, while significantly reducing computational effort. The proposed MRN is approximately 80 times faster than the Finite Element Method (FEM). This methodology provides a practical and computationally efficient tool for optimization-oriented studies of PMSG.

  • Open Access

    Optimization with Time and Frequency Constraints Using Automatic Differentiation: Application to an Aircraft Electrical Power Channel

    by Lucas Agobert, Laurent Gerbaud, Benoit Delinchant

    The ordinary differential equations used to model a dynamic system can evolve during the simulation in circumstances where unpredictable events occur, more specifically, in regard to the domain of power electronics, for example, static converters will exhibit natural switching. Optimal sizing, on top of developing such a model, is a significant challenge for designers, particularly due to the complexity of incorporating efficiently both time-domain and frequency-domain constraints and objectives. This paper presents a methodology and tool to address this issue, leveraging a ‘white-box’ modeling approach, with automatic gradient computation. An efficient optimizer is coupled with a differential equation solver, capable of leveraging automatic differentiation and symbolic derivation, leading to both faster and more accurate outcomes than alternative methods. Furthermore, the developed solver incorporates original functionalities that are crucial for optimization, such as the ability to automatically detect the steady state and extract time-domain and frequency-domain features from the simulations to be optimized or constrained. The methodology is demonstrated through its application in regard to the optimal design of an aircraft electrical power channel.

  • A Level-Set-Based Topology Optimization for Maximizing the Torque of Synchronous Reluctance Machines

    by O. Brun, O. Chadebec, P. Ferrouillat, I. Niyonzima, Z. Luo, Y. Le Floch, J. Siau, F. Vi, L. Gerbaud

    The paper presents a Level-Set based topology optimization method for improving the magnetic torque of electrical motors such as synchronous reluctance machines using a 2D magnetostatic finite element context modelling. The novelty is the use of a fully analytical expression for the torque sensitivity analysis based on the virtual work principle which is more accurate and general than other methods, and its application to a Level-Set implementation. The numerical study of a synchronous reluctance machine is presented. Then, the Level-Set method is detailed in a general context. The corresponding analytical continuous sensitivity analysis using the adjoint method to maximize the torque is expressed and validated. Finally, the application to the optimization of the rotor of a synchronous reluctance machine is shown to illustrate the efficiency of the method.


  • Injectionless Acoustic-Noise-Based PMSM Sensorless Control Using RCPLL for Improved Estimation Performance

    by Amirhossein Malekipour, Adrien Corne, Lauric Garbuio, Pierre Granjon, Laurent Gerbaud

    This article introduces an injectionless approach for acoustic-noise-based sensorless control of the permanent magnet synchronous machine. Replacing the high-frequency injection, the pulsewidth modulation (PWM) voltages are used as the basis for the method implementation. The mathematical model of PWM with considering the deadtime effect is first presented. Then, its impact upon the harmonics of current, magnetic fields, and generated radial forces is detailed. It is experimentally verified that in the presence of deadtime, unlike the contaminated current profile, there are merely specific-order speed-dependent components appeared in the acoustic noise spectrum, which is a clear bonus for signal processing precision and estimation performance. Moreover, a novel phase-locked loop (PLL) topology comprising a resonant-controller-based feedforward compensation block (RCPLL) is proposed. This compensation block is integrated within the PLL, by which the extra harmonics in the PLL error are directly suppressed, and therefore, the estimation performance is noticeably enhanced. The robustness of the proposed sensorless algorithm, alone, is verified experimentally under different conditions, and then, the estimation performances with and without the proposed RCPLL are compared.


  • Open Access

    A Closed-Loop PMSM Sensorless Control Based on the Machine Acoustic Noise

    by Amirhossein Malekipour, Adrien Corne, Lauric Garbuio, Pierre Granjon, Laurent Gerbaud

    In this article, a novel sensorless control for permanent magnet synchronous machine (PMSM) using its radiated acoustic noise is proposed in which a high-frequency voltage signal is superimposed upon the fundamental excitation and the machine response to such excitation is studied. First, the analytical equations describing the field formation within the airgap leading to the generation of radial forces and acoustic noise are extensively investigated. In the next step, resulting harmonics in the acoustic noise waveform caused by the injected signals are predicted. Then it is experimentally verified that, depending on the machine structure, there will be some distinctive sidebands around the injected frequency directly related to the fundamental synchronous frequency. Acoustic noise waveform is highly distorted and sensitive to the environment; so a proposed four-stage signal processing algorithm containing two self-adaptive band-pass filters are used to safeguard the signal against unwanted distortions and flawlessly extract the rotor position information. Robustness and effectiveness of this method are verified experimentally in various operating conditions.


  • Sensitivity analysis using Sobol indices for the thermal modelling of an electrical machine for sizing by optimization

    by Mathias Le Guyadec, Laurent Gerbaud, Emmanuel Vinot, Benoit Delinchant

    Purpose: The thermal modelling of an electrical machine is difficult because the thermal behavior depends on its geometry, the used materials and its manufacturing process. In the paper, such a thermal model is used during the sizing process by optimization of a hybrid electric vehicle (HEV). This paper aims to deal with the sensitivities of thermal parameters on temperatures inside the electrical machine to allow the assessment of the influence of thermal parameters that are hard to assess. Design/methodology/approach: A sensitivity analysis by Sobol indices is used to assess the sensitivities of the thermal parameters on electrical machine temperatures. As the optimization process needs fast computations, a lumped parameter thermal network (LPTN) is proposed for the thermal modelling of the machine, because of its fastness. This is also useful for the Sobol method that needs too many calls to this thermal model. This model is also used in a global model of a hybrid vehicle. Findings: The difficulty is the thermal modelling of the machine on the validity domain of the sizing problem. The Sobol indices allow to find where a modelling effort has to be carried out. Research limitations/implications: The Sobol indices have a significant value according to the number of calls of the model and their type (first-order, total, etc.). Therefore, the quality of the thermal sensitivity analysis is a compromise between computation times and modelling accuracy. Practical implications: Thermal modelling of an electrical machine in a sizing process by optimization. Originality/value: The use of Sobol indices for the sensitivity analysis of the thermal parameters of an electrical machine.


  • Analytical frequency modeling of a diode rectifier: formulation for SQP solving versus formulation for Newton-Raphson solving

    by Le Nhat Hoang Tran, Laurent Gerbaud, Nicolas Retiere, Hieu Nguyen Huu

    Purpose – Static converters generate current harmonics in grids. Numerous studies on analytical frequency models of converters are often required to carry out their harmonic modeling in the context of sizing by optimization. Some formulations are proposed to solve such models. Each formulation has its own advantages and drawbacks. The paper mainly focusses on two formulations: the first to be solved by sequential quadratic programming (SQP) and the second to be solved by Newton-Raphson (NR). In this way, the purpose of this paper is to present the performances of each formulation and compare the results of both formulations for the modeling of a single-phase diode rectifier. Design/methodology/approach – The paper aims to compare SQP formulation and NR formulation, and to propose the ways to improve their convergence. In the modeling, by using an explicit formulation of the state variables combined to a numerical method, equations are defined to reduce, as far as possible, the number of unknowns. Findings...


  • Using constrained optimization algorithm for the modeling of static converter harmonics

    by Jeanfrancois Lange, Laurent Gerbaud, H Nguyenhuu, J Roudet

    Purpose – An analytical approach is preferred to carry out the harmonic modelling of power electronics converters because it is generally faster than time simulation chained with FFT. However, the difficulty of such an approach is to build the model and to manage the uncontrolled commutations that occur in the studied static converter, and also to deal with large equations. The purpose of this paper is to propose an aid in the frequency modelling of the drive elements, in the frequency domain, including all key parameters for sizing aim i.e. a way to optimize the EMC filter using different algorithms.Design/methodology/approach – The paper aims to propose an aid to create such models, and to assure its good solving, i.e. that the correct operating mode is represented. So, the solving problem is formulated as an optimization problem under constraints, to solve this difficulty.Findings – The difficulty is to be sure to deal with the good operating mode of the static converter when soft or uncontrolled commu...