YLYue Liu

Yue Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yue Liu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:

  • Yi Zhang

    Nankai University

    4 shared publications
  • Huamei Zhang

    Institute of Photoelectronic Thin Film Devices and Technology and Tianjin Key Laboratory of Photoelectronic Thin Film Devices and Technology, and Engineering Research Center of Thin Film Optoelectronics Technology, Ministry of Education, Nankai University , Tianjin 300350

    2 shared publications
  • Jiabin Dong

    Institute of Photoelectronic Thin Film Devices and Technology, State Key Laboratory of Photovoltaic Materials and Cells, and Engineering Research Center of Thin Film Optoelectronics Technology, Ministry of Education , Nankai University, Tianjin 300350

    2 shared publications
  • Xuejun Xu

    Institute of Photoelectronic Thin Film Devices and Technology, State Key Laboratory of Photovoltaic Materials and Cells, and Engineering Research Center of Thin Film Optoelectronics Technology, Ministry of Education , Nankai University, Tianjin 300350

    2 shared publications
  • Zhan Shen

    Tianjin Key Laboratory of Thin Film Devices and Technology and Institute of Photoelectronic Thin Film Devices and Technology, Nankai University 2 , Tianjin 300350, China

    2 shared publications
  • Chuanyu Liu

    Institute of Photoelectronic Thin Film Devices and Technology, State Key Laboratory of Photovoltaic Materials and Cells, and Engineering Research Center of Thin Film Optoelectronics Technology, Ministry of Education , Nankai University, Tianjin 300350

    1 shared publication

Latest Publications

  • InCl3-modified In2O3/CdS double electron transport layers for high-performance Sb2(S, Se)3 solar cell

    by Chuanyu Liu, Zixiu Cao, Wei Cheng, Yue Liu, Yanyan Liu, Yongping Dai, Jiabin Dong, Jianpeng Li, Xuejun Xu, Yi Zhang

    Antimony selenosulfide [Sb2(S, Se)3] solar cells have attracted increasing attention because of their abundant reserves and excellent photoelectric properties. In the case of the Sb2(S, Se)3 solar cell featuring a superstrate structure of indium tin oxide/cadmium sulfide (CdS)/Sb2(S, Se)3/spiro-OMeTAD/Au, the device performance was limited by the poor heterojunction interfaces, especially the poor interface of the P–N heterojunction. In this study, InCl3-modified In2O3 was used to tailor the quality of the P–N heterojunction. The quality of the CdS deposited on InCl3-modified In2O3 was significantly improved. In addition, the conduction band offset between P–N junctions is tailored, which is helpful for carrier transport. As Sb2(S, Se)3 was deposited on such a modified electron transport layer by InCl3-modified In2O3, the (hkl, l = 1) preferred orientation of the Sb2(S, Se)3 film increased greatly, and the built-in voltage of the Sb2(S, Se)3 solar cell tailored by InCl3-modified In2O3 was enlarged, which is beneficial for carrier transport. Finally, the InCl3-modified In2O3-assisted CdS double electron transport layers achieved a remarkable power conversion efficiency of 7.44% for Sb2(S, Se)3 solar cells via the vapor transport deposition method. This work provides a valuable reference for interface modifications and further boosts the efficiency of Sb2(S, Se)3 solar cells.


  • Tailoring Li assisted CZTSe film growth under controllable selenium partial pressure and solar cells

    by Yue Liu, Huamei Zhang, Rutao Meng, Jiabin Dong, Xuejun Xu, Jincheng Zhang, Yi Zhang

    It is still critical to prepare a high-quality absorber layer for high-performance Cu2ZnSnSe4 (CZTSe) multi-component thin film solar cell. The gas pressure during the selenization process is commonly referred to as the pressure of inert gas in the tube furnace, while the exact selenium partial pressure is difficult to be controlled. Therefore, the grain growth under different selenium partial pressures cannot be made clear, and the film quality cannot be controlled as well. In this work, we use a sealed quartz tube as the selenization vessel, which can provide a relatively high and controllable selenium partial pressure during the selenization process. To further tailor the grain growth, lithium doping is also utilized. We find that lithium can greatly promote the growth of CZTSe films as the selenium partial pressure is controlled near the selenium saturation vapor pressure. Combined with ALD-Al2O3, the crystallization quality of CZTSe absorber films is significantly enhanced and the efficiency of CZTSe solar cells achieved a significant improvement. This work clarifies the effect of controllable Se pressure on CZTSe film growth and can lead to better results in CZTSe and other multi-compound thin film solar cells.


  • Revealing the reason for enhanced CZTSSe device performance after Ag heavily doped into absorber surface

    by Siyu Wang, Zhan Shen, Yue Liu, Yi Zhang

    Ag-doping treatment is a popular method for enhancing the performance of kesterite-structured Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Among the various methods, incorporating a high concentration of Ag+ into an absorber surface has proven to be particularly effective. However, the exact mechanisms behind this improvement are still unclear. This study aims to investigate the key factors that improve device performance through simulation. Specifically, the influence of the change in the carrier density, CuZn antisite defects, interface defect density, and formation of an n-type AZTSSe surface after heavy surface Ag doping have been examined. The simulation results indicate that the formation of an n-type AZTSSe layer on an absorber surface can significantly improve the open circuit voltage (VOC) and overcome the efficiency saturation problem induced by severe interface recombination for CZTSSe devices with a negative conduction band offset (CBO), compared to other affecting factors. This is because the modified conduction band alignment and the realization of interface-type inversion reduce interface recombination and retard the Fermi level pinning. However, the formation of interface-type inversion does not significantly improve CZTSSe devices with a positive CBO, as these devices already have weaker interface recombination. This work implies that the formation of an n-type AZTSSe layer is crucial for further improving the performance of CZTSSe devices with a negative CBO and can pave the way for improving the performance of thin film solar cells with severe interface recombination.


  • Open Access

    Sulfur-graded kesterite structured film drives improvement of VOC

    by Siyu Wang, Yue Liu, Zhan Shen, Huamei Zhang, Li Wu, Juan Li, Fangyang Liu, Yi Zhang

    Realizing the graded bandgap in absorber layer is very essential for high efficient thin film solar cells. However, such bandgap modification in kesterite-structured Cu2ZnSnSe4 is normally realized via high temperature sulfurization process (above 500°C), which is not only difficult to control the sulfurization depth, but also introduces additional deep defects because of the decomposition of absorber layer at such high temperature. In this study, a low-temperature sulfurization process (150°C) is developed. Such process not only inhibits the decomposition of Cu2ZnSnSe4 films and controls the elemental distribution very well, but also increase the surface bandgap of the absorber layer and form a gradient energy bandgap. Also, the density of deep-level defects in the Cu2ZnSnSe4 layer is reduced. As a consequence, the open circuit voltage of the solar cell is improved by 60 mV. This study paves the way towards the high efficient kesterite solar cell and other solar cells.