ZXZhanqing Xing

Zhanqing Xing

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhanqing Xing has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental Study on the Mechanical Properties and Health Monitoring Methods of Joints in AAPF

    by Zhanqing Xing, Gang Wang, Jing Pang

    Aluminum alloy frame is a novel structure system developed in recent years. In this article, the load-bearing performance of the beam-beam joint of the aluminum alloy frame is studied through numerical analysis and experiment and a safety monitoring method is developed. The impacts of the arch angle and bolt diameter on the beam-beam joint mechanical characteristics are explored through experiments under vertical load. When the diameter of the bolt was increased, the load-bearing performance of such joint displayed a pattern of first increasing and then decreasing. As the arch angle increased, the load-bearing performance on the joint gradually improved. Based on the experiments, numerical analysis models varying in arch angle were established, and the impacts of arch angles on the stiffness during the yield stage, ultimate load, and elastic stiffness of the aluminum alloy portal frame (AAPF) beam-beam joints were further explored through numerical simulation of the structure under vertical and horizontal loads. When the arching angle was increased, the elastic stiffness and yield stiffness of the beam-beam joint under vertical load showed a pattern of first increasing and then decreasing. When the arching angle was increased, the elastic stiffness and yield stiffness of the beam-beam joint under horizontal load significantly decreased. Based on the mechanical properties, a safety monitoring method for AAPF beam-beam joints based on displacement monitoring and frequency monitoring is proposed.


  • Open Access

    Study of the Mechanical Properties of Beam-Column Joints in a New Type of Aluminum Alloy Portal Frame

    by Zhanqing Xing, Gang Wang, Xiaolin Lin, Jing Pang, Caiqi Zhao, Qiaosheng Chen

    In the article, the semi-permanent aluminum alloy portal frame is used as the research background, beam-column joints are used as the research object, and experimental and numerical analyses are carried out. The influence of different bolt diameters and arch angles on the mechanical properties of beam-column joints under vertical load was analyzed using five sets of experiments. The experimental results show that the load–displacement curves of different bolt diameters in the elastic stage are basically consistent. After entering the plastic stage, the ultimate load first increases and then decreases, and the ultimate displacement is basically consistent. According to the experiment, there is no significant difference in the load–displacement curve when the arch angle increases from 90 degrees to 108 degrees. When the arch angle increases to 126 degrees, the stiffness and ultimate bearing capacity of the node under vertical load significantly increase. Then, a numerical analysis model was established to analyze the mechanical performance of beam-column joints under horizontal loads. The numerical analysis results indicate that under horizontal load, as the diameter of the bolt increases, the yield load, yield displacement, ultimate load, and ultimate displacement of the beam-column node exhibit no significant changes, and the change amplitude is minimal. When the beam-column node is subjected to horizontal loads, as the arch angle increases, the yield and ultimate displacement increase by 2.14 times and 2.78 times, respectively, and the yield and ultimate load decrease by 58% and 48%, respectively. Finally, a simplified design method for beam-column joints was proposed based on experiments and numerical analysis.