Menglong Zou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Menglong Zou has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Fengqiu Xu
Electronic Information School, Wuhan University, Wuhan, China
3 shared publications - Shun Zhou
Electronic Information School, Wuhan University, Wuhan, China
3 shared publications - Xianze Xu
Electronic Information School, Wuhan University, Wuhan, China
3 shared publications - Mingxing Song
Electronic Information School, Wuhan University, Wuhan, China
1 shared publication - Yaping Jie
Electronic Information School, Wuhan University, Wuhan, China
1 shared publication - Yuan Shi
Electronic Information School, Wuhan University, Wuhan, China
1 shared publication
Latest Publications
- 5 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (4) , 5163-5173
FPGA-Based Hierarchical Efficient Driving Framework for Multiphase MLPM
This article proposes a hierarchical driving framework for a magnetically levitated planar machine (MLPM) based on an field-programmable gate array (FPGA), which can be easily extended to extend the motion stroke by increasing the number of coils. In the commutation strategy, only the coils underneath the magnet array are energized to reduce the computation burden. The physically constrained data-driven wrench model (PCDWM), considering the end-effects of the coil and magnet array, is introduced in the real-time (RT) control system to distribute the coil current at each control cycle. The H bright circuit driving every coil independently maintains the low cost and high efficiency with the inherent parallelism of the FPGA, promising the synchronous driving of each coil. In the experiments, the constructed prototype realizes a micro-meter positioning resolution. A series of comparative tests highlights the lower power consumption of the driving method and the better motion decoupling performance resulting from the data-driven wrench model (DWM).
- 5 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (4) , 5163-5173
FPGA-Based Hierarchical Efficient Driving Framework for Multiphase MLPM
This article proposes a hierarchical driving framework for a magnetically levitated planar machine (MLPM) based on an field-programmable gate array (FPGA), which can be easily extended to extend the motion stroke by increasing the number of coils. In the commutation strategy, only the coils underneath the magnet array are energized to reduce the computation burden. The physically constrained data-driven wrench model (PCDWM), considering the end-effects of the coil and magnet array, is introduced in the real-time (RT) control system to distribute the coil current at each control cycle. The H bright circuit driving every coil independently maintains the low cost and high efficiency with the inherent parallelism of the FPGA, promising the synchronous driving of each coil. In the experiments, the constructed prototype realizes a micro-meter positioning resolution. A series of comparative tests highlights the lower power consumption of the driving method and the better motion decoupling performance resulting from the data-driven wrench model (DWM).
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
Tracking Error Suppression of Maglev Planar Actuator With FPGA-Based MPC
The precision positioning equipment is essential in many manufacture areas. This paper develops a novel noncontact six-degree-of-freedom maglev planar actuator (MLPA) for applications in precision manufacturing area. To achieve the tracking and positioning of MLPA, a model predictive control (MPC) algorithm is introduced. However, the high frequency feedback control of maglev system up to kilohertz level poses the challenges in the online optimization of MPC. We argue that the field-programmable gate array (FPGA), a high throughput and low latency processor, accelerates the computation of MPC, and the High-Level synthesis (HLS) tool simplifies the implementation of the optimization algorithm, which is the most complex module in MPC. In this work, the dual-gradient projection method is introduced to realize the online optimization with its characteristics of parallelism. Benefiting from the parallel architecture of FPGA, the dual-gradient projection method successfully runs in the millisecond level with the acceleration performance highlighted by comparing with active set and interior point methods. Furthermore, the FPGA-based MPC is deployed for MLPA to inhibit the trajectory tracking error and improve the step response speed. The synthesis of the proposed FPGA-based MPC scheme indicates the prediction horizon of MPC is able to theoretically reach about 20, and the experiments undertaken on the real-time system shows that tracking performance of MLPA is improved with the prediction horizon expanding.
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-11
Tracking Error Suppression of Maglev Planar Actuator With FPGA-Based MPC
The precision positioning equipment is essential in many manufacture areas. This paper develops a novel noncontact six-degree-of-freedom maglev planar actuator (MLPA) for applications in precision manufacturing area. To achieve the tracking and positioning of MLPA, a model predictive control (MPC) algorithm is introduced. However, the high frequency feedback control of maglev system up to kilohertz level poses the challenges in the online optimization of MPC. We argue that the field-programmable gate array (FPGA), a high throughput and low latency processor, accelerates the computation of MPC, and the High-Level synthesis (HLS) tool simplifies the implementation of the optimization algorithm, which is the most complex module in MPC. In this work, the dual-gradient projection method is introduced to realize the online optimization with its characteristics of parallelism. Benefiting from the parallel architecture of FPGA, the dual-gradient projection method successfully runs in the millisecond level with the acceleration performance highlighted by comparing with active set and interior point methods. Furthermore, the FPGA-based MPC is deployed for MLPA to inhibit the trajectory tracking error and improve the step response speed. The synthesis of the proposed FPGA-based MPC scheme indicates the prediction horizon of MPC is able to theoretically reach about 20, and the experiments undertaken on the real-time system shows that tracking performance of MLPA is improved with the prediction horizon expanding.
- Open Access
Force and Torque Model of Magnetically Levitated System with 2D Halbach Array and Printed Circuit Board Coils
Precision machining fields often require worktables with different stroke sizes. To address the need for scalability and facilitate manufacturing, this study proposes a novel infinite expansion magnetically levitated planar motor (MLPM) based on PCB stator coils. Different from existing magnetic levitation systems that use PCB coils, the design presented in this paper utilizes smaller coil units, with each coil being independent of one another. The coils are structured in a spiral pattern on a 16-layer PCB, comprising 15 layers of coils, while the last layer is dedicated to wiring and other circuits. Magnetic field modeling is conducted for both the stator coil and the 2D Halbach array structure employed in the system. A simple table lookup method is employed to accurately account for the prevalent end effects observed during system motion. Additionally, the decoupling effect of magnetic force and torque is evaluated by solving for the current vector at different points along a specific trajectory. To verify the accuracy of the proposed system’s modeling, a prototype is developed and tested. Experimental results demonstrate that compared to traditional harmonic model methods, the proposed approach improves the calculation accuracy of magnetic force by 50.31% and torque by 70.65%. This study presents a new MLPM system with vast potential applications in precision manufacturing and robotics. The innovative design and improved performance characteristics make it a promising technology for enhancing the capabilities of worktables in precision machining fields.
Open AccessForce and Torque Model of Magnetically Levitated System with 2D Halbach Array and Printed Circuit Board Coils
Precision machining fields often require worktables with different stroke sizes. To address the need for scalability and facilitate manufacturing, this study proposes a novel infinite expansion magnetically levitated planar motor (MLPM) based on PCB stator coils. Different from existing magnetic levitation systems that use PCB coils, the design presented in this paper utilizes smaller coil units, with each coil being independent of one another. The coils are structured in a spiral pattern on a 16-layer PCB, comprising 15 layers of coils, while the last layer is dedicated to wiring and other circuits. Magnetic field modeling is conducted for both the stator coil and the 2D Halbach array structure employed in the system. A simple table lookup method is employed to accurately account for the prevalent end effects observed during system motion. Additionally, the decoupling effect of magnetic force and torque is evaluated by solving for the current vector at different points along a specific trajectory. To verify the accuracy of the proposed system’s modeling, a prototype is developed and tested. Experimental results demonstrate that compared to traditional harmonic model methods, the proposed approach improves the calculation accuracy of magnetic force by 50.31% and torque by 70.65%. This study presents a new MLPM system with vast potential applications in precision manufacturing and robotics. The innovative design and improved performance characteristics make it a promising technology for enhancing the capabilities of worktables in precision machining fields.