NLNa Lu

Na Lu

*This is an algorithmically generated author record based on publicly available information.

Na Lu has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design Optimization of Jacket Substructure of Offshore Wind Turbine

    by Ben He, Na Lv, Ruilong Shi

    The design optimization of the jacket substructure could reduce the cost of energy and the correlated carbon cost. The mass of jacket is optimized with respect to maximum stress and displacement responses. Wind and dead loads were applied at the top of the jacket referenced point. Wave load and foundation boundary were applied using Dload and UEL function in the Abaqus subroutine. Six different parameters were evaluated, including the pile height above mudline, the base width, brace thickness and diameter, and the main leg thickness and diameter. The parametrically optimized model has mass minimized by 16%. The maximum stress at the top of the optimal jacket reduced to 274.91 MPa from 288.70 MPa. The maximum displacement at the top increased to 87.37 mm from 83.88 mm, albeit, lower than the code limit of 175 mm. The absolute value of the maximum rotation at the top reduced from 0.309° to 0.304°, which is lower than the code limit of 0.382°. The pile rotation at the mudline increased by 14%, from 0.120° to 0.137°, nonetheless, lower than the DNV code limit of 0.250°. Initial numerical basis has been developed for the parametric design optimization of the jacket substructure. From the parameter studies conducted mathematical models could be developed for efficient numerical optimization.

  • Open Access

    Numerical Investigation of Hydrodynamic Responses of a Moored Liquefied Natural Gas Ship under Multimodal Waves

    by Na Lu, Tiaojian Xu, Lu Xia, Guohai Dong

    Ocean waves typically consist of wind, sea, and swell trains. Conventionally, the treatment of multimodal waves has been to conceptualize them as a unified wave system and employ a single set of aggregate wave parameters for the representation of their collective characteristics. Nevertheless, a better understanding of multimodal waves is important when analyzing the interactions between waves and moored vessels, considering the pronounced sensitivity of a ship’s responses to wave periods and directions. Many spectral partitioning methodologies have been proposed to discern and segregate multimodal waves into two or more distinct wave systems, providing fundamental information for investigating moored ship responses to multimodal waves. Utilizing the wave spectra data acquired from a specific water region in South America, a comprehensive numerical study was undertaken by employing the specialized ocean engineering software ORCAFLEX 11.2e. The primary objective of this investigation is to analyze the dynamic response of a moored liquefied natural gas (LNG) vessel in ballast conditions subjected to waves defined by distinct wave identification methods (i.e., overall method and spectral partition method). Furthermore, the waves are categorized into two groups: beam waves and head waves. Results show that beam waves induce a substantial ship response, whereas head waves pose a comparatively lower risk to maritime vessels. Furthermore, the conventional overall wave approach tends to neglect the roll motion generated by multimodal waves when they propagate as head waves. Nevertheless, when the wave direction aligns with beam waves, the overall wave approach tends to produce the roll motion. These findings indicate the importance of considering multimodal waves in quay layout and mooring configuration design.