Luis Mugele
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Luis Mugele has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Hans Henning Stutz
Karlsruhe Institute of Technology
7 shared publications Hans Henning Stutz
Institute of Soil Mechanics and Rock Mechanics (IBF), Karlsruhe Institute of Technology (KIT), Engler-Bunte-Ring 14, Karlsruhe, 76131, Germany
3 shared publicationsDavid Mašín
Faculty of Science Charles University Prague Czech Republic
2 shared publications- Andrzej Niemunis
Institute of Soil Mechanics and Rock Mechanics, Karlsruhe Institute of Technology, Karlsruhe, Germany
1 shared publication Christoph Niklasch
Ed. Züblin AG, Zentrale Technik, Albstadtweg 3, Stuttgart, 70567, Germany
1 shared publicationDaniela Alejandra Villarreal Illada
Institute of Soil Mechanics and Rock Mechanics (IBF), Karlsruhe Institute of Technology (KIT), Engler-Bunte-Ring 14, Karlsruhe, 76131, Germany
1 shared publication
Latest Publications
- Open Access
- 21 October 2026
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
Hypoplasticity for Sand With Explicitly Defined Asymptotic States
A hypoplastic model for sand with defined asymptotic states is proposed. The fourth‐order tensor is defined by modifying the compression relation of the reference hypoplastic model by von Wolffersdorff (HP). This enables the mathematical formulation of a hypoplastic model for sand including the asymptotic state boundary surface (ASBS) using the ‐based mathematical framework. The resulting asymptotic hypoplastic model (AHP) for sand can be formulated either using an implicitly defined ASBS (AHPi) or, based on the further proposed double formulation, using an explicitly defined ASBS (AHPe). Especially the AHPi reproduces the overall stress‐strain behavior of the reference HP model quite well. However, larger discrepancies occur between AHPe and HP, particularly for dense soils. To further address cyclic loading effects, the AHP models are coupled with the generalized intergranular strain (GIS) concept. Element simulations confirm consistent responses of the HP+GIS model and the proposed constitutive formulations and demonstrate that the latter provides a basis for the future development of ASBS‐based hypoplastic models for sand.
- 21 October 2026
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
Open AccessHypoplasticity for Sand With Explicitly Defined Asymptotic States
A hypoplastic model for sand with defined asymptotic states is proposed. The fourth‐order tensor is defined by modifying the compression relation of the reference hypoplastic model by von Wolffersdorff (HP). This enables the mathematical formulation of a hypoplastic model for sand including the asymptotic state boundary surface (ASBS) using the ‐based mathematical framework. The resulting asymptotic hypoplastic model (AHP) for sand can be formulated either using an implicitly defined ASBS (AHPi) or, based on the further proposed double formulation, using an explicitly defined ASBS (AHPe). Especially the AHPi reproduces the overall stress‐strain behavior of the reference HP model quite well. However, larger discrepancies occur between AHPe and HP, particularly for dense soils. To further address cyclic loading effects, the AHP models are coupled with the generalized intergranular strain (GIS) concept. Element simulations confirm consistent responses of the HP+GIS model and the proposed constitutive formulations and demonstrate that the latter provides a basis for the future development of ASBS‐based hypoplastic models for sand.
- Open Access
- 13 June 2026
- Published by Springer Nature in Acta Geotechnica
- Vol. 21 (10) , 7011-7028
Robotic automated specimen preparation (RASP): applied to air pluviation
A fully Robotic Automated Specimen Preparation (RASP) approach is introduced for granular soils using the single-nozzle dry air pluviation method. For this purpose, a nozzle is installed at the tool end of a 6-axis collaborative robot (cobot). Over 80 specimens were automatically prepared using two different granular materials and analyzed via local density measurements. Additionally, manually prepared specimens were generated for comparison. More than 1000 local density measurements have been conducted. The results demonstrate that the proposed RASP method enables a reproducible and homogeneous preparation of sand specimens, with density variations significantly lower than those observed in manually prepared specimens. The RASP enables a detailed analysis of specific preparation-influencing factors such as pluviation pattern, fall height, nozzle diameter, and nozzle velocity. In addition to the improved quality of the sand specimen preparation, the proposed RASP technique will increase efficiency and reduce economic costs in soil mechanical laboratories in the near future. Besides, the data obtained during the specimen preparation enables a data-based documentation and quality assurance of the entire preparation process.
- 13 June 2026
- Published by Springer Nature in Acta Geotechnica
- Vol. 21 (10) , 7011-7028
Open AccessRobotic automated specimen preparation (RASP): applied to air pluviation
A fully Robotic Automated Specimen Preparation (RASP) approach is introduced for granular soils using the single-nozzle dry air pluviation method. For this purpose, a nozzle is installed at the tool end of a 6-axis collaborative robot (cobot). Over 80 specimens were automatically prepared using two different granular materials and analyzed via local density measurements. Additionally, manually prepared specimens were generated for comparison. More than 1000 local density measurements have been conducted. The results demonstrate that the proposed RASP method enables a reproducible and homogeneous preparation of sand specimens, with density variations significantly lower than those observed in manually prepared specimens. The RASP enables a detailed analysis of specific preparation-influencing factors such as pluviation pattern, fall height, nozzle diameter, and nozzle velocity. In addition to the improved quality of the sand specimen preparation, the proposed RASP technique will increase efficiency and reduce economic costs in soil mechanical laboratories in the near future. Besides, the data obtained during the specimen preparation enables a data-based documentation and quality assurance of the entire preparation process.
- Open Access
- 4 August 2025
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 49 (15) , 3484-3508
Neohypoplasticity for Sand Coupled With the Generalized Intergranular Strain Concept
This work presents the coupling of the recently revisited advanced hypoplastic constitutive sand model called neohypoplasticity (NHP) with the more recently introduced concept of the generalized intergranular strain (GIS) to account for soil behavior due to small strains. The latter is essential for the simulation of cyclic deformations. In addition to the effective Cauchy‐stress and the void ratio , the resulting NHP+GIS formulation includes a fabric tensor (to account for the anisotropic soil structure), the intergranular strain , and a cyclic preloading variable as state variables. The parameter calibration of the 11 NHP and 10 GIS parameters is discussed in detail and significantly simplified compared to previous NHP versions. Element test simulations of monotonic and cyclic tests and their comparison with experimental data from Karlsruhe fine sand (KFS) and Zbraslav sand (ZS) reveal the satisfying performance of the novel model. The NHP+GIS model captures soil anisotropy effects and static liquefaction in loose sand. Cyclic mobility can be modeled irrespective of soil density. Finally, the NHP+GIS model is applied to a bifurcation problem under plane strain conditions, demonstrating its applicability in initial boundary value problems.
- 4 August 2025
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 49 (15) , 3484-3508
Open AccessNeohypoplasticity for Sand Coupled With the Generalized Intergranular Strain Concept
This work presents the coupling of the recently revisited advanced hypoplastic constitutive sand model called neohypoplasticity (NHP) with the more recently introduced concept of the generalized intergranular strain (GIS) to account for soil behavior due to small strains. The latter is essential for the simulation of cyclic deformations. In addition to the effective Cauchy‐stress and the void ratio , the resulting NHP+GIS formulation includes a fabric tensor (to account for the anisotropic soil structure), the intergranular strain , and a cyclic preloading variable as state variables. The parameter calibration of the 11 NHP and 10 GIS parameters is discussed in detail and significantly simplified compared to previous NHP versions. Element test simulations of monotonic and cyclic tests and their comparison with experimental data from Karlsruhe fine sand (KFS) and Zbraslav sand (ZS) reveal the satisfying performance of the novel model. The NHP+GIS model captures soil anisotropy effects and static liquefaction in loose sand. Cyclic mobility can be modeled irrespective of soil density. Finally, the NHP+GIS model is applied to a bifurcation problem under plane strain conditions, demonstrating its applicability in initial boundary value problems.
- Open Access
- 15 July 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 187
Accounting for cyclic and fabric effects in an enhanced hypoplastic model for sand
- 15 July 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 187
Open AccessAccounting for cyclic and fabric effects in an enhanced hypoplastic model for sand
- Open Access
- 18 June 2025
- Published by Elsevier in Journal of Energy Storage
- Vol. 130
Geotechnical gravity energy storage (GGES): A proof of concept using holistic numerical simulations
- 18 June 2025
- Published by Elsevier in Journal of Energy Storage
- Vol. 130
Open AccessGeotechnical gravity energy storage (GGES): A proof of concept using holistic numerical simulations
- Open Access
- 5 June 2024
- Published by Elsevier in Computers and Geotechnics
- Vol. 173, 106480
Generalized intergranular strain concept and its application to hypoplastic models
- 5 June 2024
- Published by Elsevier in Computers and Geotechnics
- Vol. 173, 106480
Open AccessGeneralized intergranular strain concept and its application to hypoplastic models
- 29 May 2024
- Published by Wiley in geotechnik
- Vol. 47 (2) , 98-109
Feldversuch zum Rüttelstopfsäuleneinbau und Betrachtungen zur Hohlraumaufweitung
Die Rüttelstopfverdichtung kommt als Baugrundverbesserung weltweit in fein‐ und grobkörnigen Böden zum Einsatz. Jedoch sind die Zustandsänderungen des anstehenden Bodens infolge des vollverdrängenden Säuleneinbaus und der induzierten Vibration noch nicht ausreichend untersucht. Im ersten Teil dieses Beitrags werden daher in einem Feldversuch die Auswirkungen der Rüttelstopfsäulenherstellung auf den Zustand des anstehenden Bodens untersucht. Dabei zeigt sich, dass der Rüttelstopfsäuleneinbau in grobkörnigen Böden zu einer Verbesserung der bautechnischen Eigenschaften des anstehenden Bodens führen kann. Motiviert durch den Feldversuch betrachtet der zweite Teil der Arbeit anhand von simplifizierten Beispielen einen grundsätzlichen Vergleich verschiedener Hohlraumaufweitungsprozesse. Mithilfe eines hypoplastischen Stoffmodells wird dabei die Aufweitung eines Hohlraums infolge (1) einer monotonen und infolge (2) einer zyklischen Belastung betrachtet. Beide Fälle werden im Hinblick auf eine qualitative Übertragbarkeit auf die Modellierung der Säuleninstallation verglichen. Es zeigt sich ein qualitativ unterschiedliches Bodenverhalten: Eine monotone Aufweitung führt zum kritischen Zustand im Boden, während eine zyklische Aufweitung in Abhängigkeit von der Durchlässigkeit zu einer Verdichtung und/oder einer Spannungsrelaxation führt. Eine vollständige Vernachlässigung der Rüttlervibration in entsprechenden numerischen Modellen erscheint daher nicht zutreffend.
- 29 May 2024
- Published by Wiley in geotechnik
- Vol. 47 (2) , 98-109
Feldversuch zum Rüttelstopfsäuleneinbau und Betrachtungen zur Hohlraumaufweitung
Die Rüttelstopfverdichtung kommt als Baugrundverbesserung weltweit in fein‐ und grobkörnigen Böden zum Einsatz. Jedoch sind die Zustandsänderungen des anstehenden Bodens infolge des vollverdrängenden Säuleneinbaus und der induzierten Vibration noch nicht ausreichend untersucht. Im ersten Teil dieses Beitrags werden daher in einem Feldversuch die Auswirkungen der Rüttelstopfsäulenherstellung auf den Zustand des anstehenden Bodens untersucht. Dabei zeigt sich, dass der Rüttelstopfsäuleneinbau in grobkörnigen Böden zu einer Verbesserung der bautechnischen Eigenschaften des anstehenden Bodens führen kann. Motiviert durch den Feldversuch betrachtet der zweite Teil der Arbeit anhand von simplifizierten Beispielen einen grundsätzlichen Vergleich verschiedener Hohlraumaufweitungsprozesse. Mithilfe eines hypoplastischen Stoffmodells wird dabei die Aufweitung eines Hohlraums infolge (1) einer monotonen und infolge (2) einer zyklischen Belastung betrachtet. Beide Fälle werden im Hinblick auf eine qualitative Übertragbarkeit auf die Modellierung der Säuleninstallation verglichen. Es zeigt sich ein qualitativ unterschiedliches Bodenverhalten: Eine monotone Aufweitung führt zum kritischen Zustand im Boden, während eine zyklische Aufweitung in Abhängigkeit von der Durchlässigkeit zu einer Verdichtung und/oder einer Spannungsrelaxation führt. Eine vollständige Vernachlässigung der Rüttlervibration in entsprechenden numerischen Modellen erscheint daher nicht zutreffend.
- Open Access
- 26 October 2023
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 48 (1) , 311-331
Neohypoplasticity Revisited
This paper presents further improvements to the neohypoplasticity (NHP), a constitutive model for sand, which overcomes some shortcomings of widely used hypoplastic models. The novelties presented in this paper includes a new description of the additional dilatancy due to the structural variable and the introduction of a new state variable, denoted as , to consider the small strain stiffness in case of a 1D loading reversal. They remove shortcomings of earlier versions of NHP. The new formulations are presented and the performance of NHP is validated with experimental data from Karlsruhe fine sand. Both monotonic and cyclic tests are simulated under drained and undrained conditions. The results demonstrate that the NHP accurately reproduces the observed behaviour in monotonic and cyclic experiments.
- 26 October 2023
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 48 (1) , 311-331
Open AccessNeohypoplasticity Revisited
This paper presents further improvements to the neohypoplasticity (NHP), a constitutive model for sand, which overcomes some shortcomings of widely used hypoplastic models. The novelties presented in this paper includes a new description of the additional dilatancy due to the structural variable and the introduction of a new state variable, denoted as , to consider the small strain stiffness in case of a 1D loading reversal. They remove shortcomings of earlier versions of NHP. The new formulations are presented and the performance of NHP is validated with experimental data from Karlsruhe fine sand. Both monotonic and cyclic tests are simulated under drained and undrained conditions. The results demonstrate that the NHP accurately reproduces the observed behaviour in monotonic and cyclic experiments.
- Open Access
- 2 October 2023
- Published by TU Delft OPEN Publishing in Symposium on Energy Geotechnics 2023
On the long-term behaviour of a deep underground gravity energy stor-age system: A numerical approach using the HCA model.
Worldwide, the energy transition is reflected in the constant development of renewable energy sources such as wind power or photovoltaics. These energy sources meanwhile provide cost-effective and mass-available energy. However, renewable energy sources are subjected to natural fluctuations. This can lead to intermittent energy supply and grid instability, highlighting the urgent need for massive energy storage systems to ensure a reliable and resilient energy supply [1]. Gravity energy storage (GES) is a concept for large-scale energy storage [1, 10]. One approach is to store energy in a subsurface cavity. Through this cavity filled with water and covered by soil, potential energy can be stored through a volume and pressure increase. In a practical application, this process can be achieved by pumping water into the cavity. By discharging the water through a turbine, the stored energy can be recovered later. The earliest concepts of this innovative energy storage system proposed a geomembrane-lined bag filled with water and covered with several metres of soil as a ballast [7, 8]. However, to achieve a remarkable energy storage capacity with this concept, large volume fluxes are required. Numerical investigations [6, 9] in addition to large and small-scale laboratory tests [2, 8] show that the resulting large deformations of the soil can cause a stability problem in the soil and can result in large energy losses and soil collapse. To overcome these drawbacks, the concept of a deep cavity was presented in [3], which is schematically shown in Figure 1. The advantage of this new concept, which is the subject of the present work, is that the energy storage is carried out with significantly lower volume fluxes and, in contrast, with increased pressure. This concept leads to a significant reduction of the displacements and strains of the overlying soil, which allows investigations of the long-term stability of the overall system. Using the HCA model [5] in combination with the Hypoplasticity with intergranular strain [4], the cumulative soil behaviour can be modelled and cycles of energy storage can be simulated numerically. This corresponds to a lifetime of approx. 100 years for daily charging and discharging. Based on the investigations from [3], an extended numerical model is presented in this work and a comprehensive parameter study is carried out. In the finite element calculations, the impact of the groundwater is analysed for the first time in a quasi-static, coupled stress-pore fluid diffusion analysis both on the soil behaviour and on the energy storage. The axisymmetric numerical model and the spatial distribution of strain amplitude after cycles for saturated sand are shown in Figure 1. In addition to the energy capacity, energy efficiency and its degradation due to the cumulative soil behaviour as a result of cycles, the effects on the settlements and inclinations of structures on the ground surface are also investigated. Preliminary results are presented in Figure 1. The results of this extended numerical investigation show that the GES in the presented configurations leads to stable soil behaviour with simultaneously high energy efficiency and acceptable energy capacity. Stability problems were not detected even after storage cycles. The cumulative effects caused by the cyclic deformation are controllable. This study clearly shows that GES can contribute to energy storage and energy transition in the future.
- 2 October 2023
- Published by TU Delft OPEN Publishing in Symposium on Energy Geotechnics 2023
Open AccessOn the long-term behaviour of a deep underground gravity energy stor-age system: A numerical approach using the HCA model.
Worldwide, the energy transition is reflected in the constant development of renewable energy sources such as wind power or photovoltaics. These energy sources meanwhile provide cost-effective and mass-available energy. However, renewable energy sources are subjected to natural fluctuations. This can lead to intermittent energy supply and grid instability, highlighting the urgent need for massive energy storage systems to ensure a reliable and resilient energy supply [1]. Gravity energy storage (GES) is a concept for large-scale energy storage [1, 10]. One approach is to store energy in a subsurface cavity. Through this cavity filled with water and covered by soil, potential energy can be stored through a volume and pressure increase. In a practical application, this process can be achieved by pumping water into the cavity. By discharging the water through a turbine, the stored energy can be recovered later. The earliest concepts of this innovative energy storage system proposed a geomembrane-lined bag filled with water and covered with several metres of soil as a ballast [7, 8]. However, to achieve a remarkable energy storage capacity with this concept, large volume fluxes are required. Numerical investigations [6, 9] in addition to large and small-scale laboratory tests [2, 8] show that the resulting large deformations of the soil can cause a stability problem in the soil and can result in large energy losses and soil collapse. To overcome these drawbacks, the concept of a deep cavity was presented in [3], which is schematically shown in Figure 1. The advantage of this new concept, which is the subject of the present work, is that the energy storage is carried out with significantly lower volume fluxes and, in contrast, with increased pressure. This concept leads to a significant reduction of the displacements and strains of the overlying soil, which allows investigations of the long-term stability of the overall system. Using the HCA model [5] in combination with the Hypoplasticity with intergranular strain [4], the cumulative soil behaviour can be modelled and cycles of energy storage can be simulated numerically. This corresponds to a lifetime of approx. 100 years for daily charging and discharging. Based on the investigations from [3], an extended numerical model is presented in this work and a comprehensive parameter study is carried out. In the finite element calculations, the impact of the groundwater is analysed for the first time in a quasi-static, coupled stress-pore fluid diffusion analysis both on the soil behaviour and on the energy storage. The axisymmetric numerical model and the spatial distribution of strain amplitude after cycles for saturated sand are shown in Figure 1. In addition to the energy capacity, energy efficiency and its degradation due to the cumulative soil behaviour as a result of cycles, the effects on the settlements and inclinations of structures on the ground surface are also investigated. Preliminary results are presented in Figure 1. The results of this extended numerical investigation show that the GES in the presented configurations leads to stable soil behaviour with simultaneously high energy efficiency and acceptable energy capacity. Stability problems were not detected even after storage cycles. The cumulative effects caused by the cyclic deformation are controllable. This study clearly shows that GES can contribute to energy storage and energy transition in the future.