Jana Kuricová
Research Subjects
Jana Kuricová has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Ján Vavro
Faculty of Industrial Technologies, Alexander Dubček University of Trenčín, 020 01 Trenčín, Slovakia
4 shared publications - Ján Vavro
Faculty of industrial Technologies in Púchov, Alexander Dubček University of Trenčín, I. Krasku 491/30, 020 01 Púchov, Slovak Republic
3 shared publications - Lukáš Klimek
Faculty of Industrial Technologies in Púchov Alexander Dubček University of Trenčín I. Krasku 491/30 020 01 Púchov Slovakia
2 shared publications - Miloš Taraba
Faculty of Industrial Technologies in Púchov, Alexander Dubček University of Trenčín, I. Krasku 491/30, 020 01 Púchov, Slovakia
2 shared publications - Pavol Čerňava
Faculty of Industrial Technologies in Púchov, Alexander Dubček University of Trenčín, I. Krasku 491/30, 020 01 Púchov, Slovakia
2 shared publications - Ľuboš Marček
Faculty of Industrial Technologies, Alexander Dubček University of Trenčín, 020 01 Trenčín, Slovakia
2 shared publications
Latest Publications
- Open Access
- 6 May 2025
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 25 (2) , 239-243
Analysis the Load of the Gantry Crane during Travelling along the Crane Track Using Working Model 3D
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a Working model 3D, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt in fr...
- 6 May 2025
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 25 (2) , 239-243
Open AccessAnalysis the Load of the Gantry Crane during Travelling along the Crane Track Using Working Model 3D
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a Working model 3D, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt in fr...
- Open Access
- 21 December 2024
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 24 (6) , 969-976
The Influence of the Crane Track Unevenness on the Load of the Supporting Crane Structure
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a 3D model, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt that is in front of the turbine under the water surface. For the gantry crane which moves along a track, the directional and vertical unevennesses were determined by experiment and are given in graphic and numerical form in (mm), relating to A track and B track with a total track length of 450 (m). Based on the knowledge of the unevenness of the rail track, the four random functional dependencies defining the irregularities of the individual rails as input variables were used for the kinematic excitation of the individual wheels of the gantry crane. The stress analysis was performed for a travel speed of 30 (m.min-1) and a lift of 10 (t) under the given loading. The results of the stress analysis are presented in graphic form.
- 21 December 2024
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 24 (6) , 969-976
Open AccessThe Influence of the Crane Track Unevenness on the Load of the Supporting Crane Structure
The paper presents the analysis of the gantry crane loading when driving along the crane track, using a 3D model, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt that is in front of the turbine under the water surface. For the gantry crane which moves along a track, the directional and vertical unevennesses were determined by experiment and are given in graphic and numerical form in (mm), relating to A track and B track with a total track length of 450 (m). Based on the knowledge of the unevenness of the rail track, the four random functional dependencies defining the irregularities of the individual rails as input variables were used for the kinematic excitation of the individual wheels of the gantry crane. The stress analysis was performed for a travel speed of 30 (m.min-1) and a lift of 10 (t) under the given loading. The results of the stress analysis are presented in graphic form.
- Open Access
- 28 November 2024
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 24 (5) , 791-801
The Influence of Temperature on the Production of Antioxidant Tin-Phosphorus Alloy
The restriction of lead content in alloys for the production of the solder based on the Directive of the European Parliament and of the Council of the European Union of 08.06.2011 which is also known as RoHS (Restriction of the use of certain ...
- 28 November 2024
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 24 (5) , 791-801
Open AccessThe Influence of Temperature on the Production of Antioxidant Tin-Phosphorus Alloy
The restriction of lead content in alloys for the production of the solder based on the Directive of the European Parliament and of the Council of the European Union of 08.06.2011 which is also known as RoHS (Restriction of the use of certain ...
- Open Access
- 13 September 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (18) , 8257
Tin–Phosphorus Alloy: The Impact of Temperature on Alloy Formation and the Influence of the Dross Amount on the Solder Bath Surface
The restriction of lead content in alloys for the production of solder, based on the Directive of the European Parliament and of the Council of the European Union of 8 June 2011, which is also known as RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), had a very positive impact on research into lead-free solder alloys, as well as on the economic impact of the production of solders. It opened the door to issues relating to the mechanical properties of lead-free solders and the microhardness of formed joints, with the aim of increasing their quality and efforts to reduce production costs. In addition to the production efficiency increase, without the need for the manual removal of so-called slagging, the moderation of oxide formation on the melt surface, standing for an increase in the yield of the total amount of solder, represents one of the many factors influencing the production of lead-free alloys for tin-based soldering. This work deals with the issues of material selection for the production of lead-free solders. Temperature affects the formation of different phases when there is a change in the concentration of the elements involved because it can be a negative aspect for soldering. Therefore, it is necessary to have detailed knowledge on the entire process that takes place during temperature changes.
- 13 September 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (18) , 8257
Open AccessTin–Phosphorus Alloy: The Impact of Temperature on Alloy Formation and the Influence of the Dross Amount on the Solder Bath Surface
The restriction of lead content in alloys for the production of solder, based on the Directive of the European Parliament and of the Council of the European Union of 8 June 2011, which is also known as RoHS (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment), had a very positive impact on research into lead-free solder alloys, as well as on the economic impact of the production of solders. It opened the door to issues relating to the mechanical properties of lead-free solders and the microhardness of formed joints, with the aim of increasing their quality and efforts to reduce production costs. In addition to the production efficiency increase, without the need for the manual removal of so-called slagging, the moderation of oxide formation on the melt surface, standing for an increase in the yield of the total amount of solder, represents one of the many factors influencing the production of lead-free alloys for tin-based soldering. This work deals with the issues of material selection for the production of lead-free solders. Temperature affects the formation of different phases when there is a change in the concentration of the elements involved because it can be a negative aspect for soldering. Therefore, it is necessary to have detailed knowledge on the entire process that takes place during temperature changes.