Xiaobing Tu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaobing Tu has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Chunchen Xia
Ph.D. Candidate, State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan Univ., Wuhan 430072, China
1 shared publication - Hongxiang Gao
Zhejiang Jiangnanchun Construction Group Co., Ltd., Hangzhou 311241, China
1 shared publication - Jiahao Xu
College of Civil Engineering, Zhejiang University of Technology, Hangzhou 310023, China
1 shared publication - Jianxiong Li
POWER CHINA HUADONG Engineering Co., Ltd., Hangzhou 310000, China
1 shared publication - Kejie Fan
Zhejiang Jiangnanchun Construction Group Co., Ltd., Hangzhou 311241, China
1 shared publication - Li Shi
College of Civil Engineering, Zhejiang University of Technology, Hangzhou 310023, China
1 shared publication
Latest Publications
- Open Access
Experimental Study on Vertical Bearing and Deformation Characteristics of Qiantang River Ancient Seawall
Situated on the northern bank of the Qiantang River estuary, the ancient seawall serves not only as a national cultural relic but also as an active agent in flood and tide prevention. This seawall features a trapezoidal cross-section and is constructed with layered stone blocks and a sticky rice mortar. To investigate the load-bearing and deformation attributes of this ancient structure, a scaled-down specimen with a ratio of 1:4 was created. Monotonic and cyclic vertical loadings were then applied to the wall’s top surface. During these loading procedures, measurements of the loading force, seawall displacement, and front and side deformation fields were taken. Experimental findings reveal that the seawall tends to lean towards the soil-retaining side under vertical loading. After ten loading cycles, the vertical rigidity of the wall was reduced by 10%. Upon application of a uniformly distributed vertical load of 1.6 MPa at the top of the wall, significant cracks began to materialize in the blocks at the base of the seawall. When the loading at the top increased to 2 MPa, a vertical crack that cut through the mortar layer at the wall’s center was observed. By comparing it to a three-dimensional finite element model, the load-bearing and deformation characteristics of the ancient seawall observed in the experiments were confirmed, which could contribute to the scientifically informed conservation and protection of the seawall.
Open AccessExperimental Study on Vertical Bearing and Deformation Characteristics of Qiantang River Ancient Seawall
Situated on the northern bank of the Qiantang River estuary, the ancient seawall serves not only as a national cultural relic but also as an active agent in flood and tide prevention. This seawall features a trapezoidal cross-section and is constructed with layered stone blocks and a sticky rice mortar. To investigate the load-bearing and deformation attributes of this ancient structure, a scaled-down specimen with a ratio of 1:4 was created. Monotonic and cyclic vertical loadings were then applied to the wall’s top surface. During these loading procedures, measurements of the loading force, seawall displacement, and front and side deformation fields were taken. Experimental findings reveal that the seawall tends to lean towards the soil-retaining side under vertical loading. After ten loading cycles, the vertical rigidity of the wall was reduced by 10%. Upon application of a uniformly distributed vertical load of 1.6 MPa at the top of the wall, significant cracks began to materialize in the blocks at the base of the seawall. When the loading at the top increased to 2 MPa, a vertical crack that cut through the mortar layer at the wall’s center was observed. By comparing it to a three-dimensional finite element model, the load-bearing and deformation characteristics of the ancient seawall observed in the experiments were confirmed, which could contribute to the scientifically informed conservation and protection of the seawall.
- Open Access
Comparative Experimental Study of Geotube Groins and Mixed Clay–Geotube Groins under Various Flow Conditions
During the cofferdam construction of the toe reinforcement project at the Qiantang River Estuary, the scouring of the riverbed at the groin head often led to the collapse of geotube groins due to strong tidal currents. Based on field experience, employing a combination of clay and geotubes proved to be a more effective solution to this problem. This study adopted a flume model experiment to investigate the scouring and deposition around geotube groins and mixed clay–geotube groins. The results indicated that the influence of tidal surges on geomorphic changes surrounding the groins was more pronounced during spring tides than during neap tides. Under the same flow conditions, the scour depth at the head of the geotube groin was notably deeper than that of the mixed clay–geotube groin. Additionally, sediment silting behind the mixed clay–geotube groin was significantly greater than that behind the geotube groin. The clay component of the mixed clay–geotube groin served to mitigate the head scour, enhancing the overall structural stability to a certain extent. The geotube groin, with its surrounding scour pits expanding over time, experienced increasing tensile strain. This resulted in the rupture of the geotextile material, the loss of internal sand and, ultimately, groin collapse. It was found that mixed clay–geotube groins were better suited for cofferdam construction in strong tidal estuaries compared to geotube groin alternatives.
Open AccessComparative Experimental Study of Geotube Groins and Mixed Clay–Geotube Groins under Various Flow Conditions
During the cofferdam construction of the toe reinforcement project at the Qiantang River Estuary, the scouring of the riverbed at the groin head often led to the collapse of geotube groins due to strong tidal currents. Based on field experience, employing a combination of clay and geotubes proved to be a more effective solution to this problem. This study adopted a flume model experiment to investigate the scouring and deposition around geotube groins and mixed clay–geotube groins. The results indicated that the influence of tidal surges on geomorphic changes surrounding the groins was more pronounced during spring tides than during neap tides. Under the same flow conditions, the scour depth at the head of the geotube groin was notably deeper than that of the mixed clay–geotube groin. Additionally, sediment silting behind the mixed clay–geotube groin was significantly greater than that behind the geotube groin. The clay component of the mixed clay–geotube groin served to mitigate the head scour, enhancing the overall structural stability to a certain extent. The geotube groin, with its surrounding scour pits expanding over time, experienced increasing tensile strain. This resulted in the rupture of the geotextile material, the loss of internal sand and, ultimately, groin collapse. It was found that mixed clay–geotube groins were better suited for cofferdam construction in strong tidal estuaries compared to geotube groin alternatives.