JBJohn William Boley

John William Boley

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


John William Boley has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Additively manufactured thermoresponsive patient-specific orthodontic typodonts

    by Amin Montazeri, Hatim Alqurashi, Patriot Berisha, Haolat Demilekun Sadiku, Gracie Abdalla, Ramón E. Sánchez Cruz, Nicole Bacca, Elie Amm, J. William Boley

  • Open Access

    Synthetic fascia for stiff and tough 4D printed multifunctional structures that detect and tolerate damage

    by Javier M. Morales Ferrer, Chloe Kekedjian, Nicole Bacca, J. William Boley

    Creating shape-morphing structures with time-responsive materials is a key goal of 4D printing, but combining high stiffness ( E ) and toughness ( K ) in a single material remains difficult. Soft materials stretch but lack strength, while stiff materials resist deformation but are brittle. Nature overcomes this trade-off in skeletal muscle by surrounding strong fibers with soft, tough tissue for protection and support. Inspired by this strategy, we develop a multi-material printing method that combines stiff synthetic muscle with a soft, stretchable adhesive to form a composite structure. Here, we show that this design greatly improves toughness without sacrificing stiffness, enables controlled actuation, and maintains function after multiple fractures. We demonstrate these properties in a damage-tolerant actuator, a lifting robot with record performance, and a lattice that detects and withstands extreme loads while remaining operational.


  • Open Access

    Self‐Catalyzed Chemically Coalescing Liquid Metal Emulsions

    by Stephanie F. Zopf, Ramón E. Sánchez Cruz, Chloe Kekedjian, Lu Ping, Javier M. Morales Ferrer, Jean Paul Soto Aquino, Rongxuan Xie, Xi Ling, J. William Boley

    Gallium‐based liquid metal alloys (GaLMAs) have widespread applications ranging from soft electronics, energy devices, and catalysis. GaLMAs can be transformed into liquid metal emulsions (LMEs) to modify their rheology for facile patterning, processing, and material integration for GaLMA‐based device fabrication. One drawback of using LMEs is reduced electrical conductivity owing to the oxides that form on the surface of dispersed liquid metal droplets. LMEs thus need to be activated by coalescing liquid metal droplets into an electrically conductive network, which usually involves techniques that subject the LME to harsh conditions. This study presents a way to coalesce these droplets through a chemical reaction at mild temperatures ( T ∼ 80 °C). Chemical activation is enabled by adding halide compounds into the emulsion that chemically etch the oxide skin on the surface of dispersed droplets of eutectic gallium indium (eGaIn). LMEs synthesized with halide activators can achieve electrical conductivities close to bulk liquid metal (2.4 × 10 4 S cm −1 ) after being heated. 3D printable chemically coalescing LME ink formulations are optimized by systematically exploring halide activator type and concentration, along with mixing conditions, while maximizing for electrical conductivity, shape retention, and compatibility with direct ink writing (DIW). The utility of this ink is demonstrated in a hybrid 3D printing process to create a battery‐integrated light emitting diode array, followed by a nondestructive low temperature heat activation that produces a functional device.


  • Neural network–enabled, all-electronic control of non-Newtonian fluid flow

    by Huilu Bao, Xin Zhang, Xiaoyu Zhang, Xiao Fan, J. William Boley, Jinglei Ping

    Real-time, all-electronic control of non-Newtonian fluid flow through a microscale channel is crucial for various applications in manufacturing and healthcare. However, existing methods lack the sensitivity required for accurate measurement and the real-time responsiveness necessary for effective adjustment. Here, we demonstrate an all-electronic system that enables closed-loop, real-time, high-sensitivity control of various waveforms of non-Newtonian fluid flow (0.76 μl min−1) through a micro-sized outlet. Our approach combines a contactless, cuff-like flow sensor with a neural-network control program. This system offers a simple, miniaturized, versatile, yet high-performance solution for non-Newtonian fluid flow control, easily integrated into existing setups.


  • Multiscale Heterogeneous Polymer Composites for High Stiffness 4D Printed Electrically Controllable Multifunctional Structures

    by Javier M. Morales Ferrer, Ramón E. Sánchez Cruz, Sophie Caplan, Wim M. Van Rees, J. William Boley

    4D printing is an emerging field where 3D printing techniques are used to pattern stimuli‐responsive materials to create morphing structures, with time serving as the fourth dimension. However, current materials utilized for 4D printing are typically soft, exhibiting an elastic modulus (E) range of 10−4 to 10 MPa during shape change. This restricts the scalability, actuation stress, and load‐bearing capabilities of the resulting structures. To overcome these limitations, multiscale heterogeneous polymer composites are introduced as a novel category of stiff, thermally responsive 4D printed materials. These inks exhibit an E that is four orders of magnitude greater than that of existing 4D printed materials and offer tunable electrical conductivities for simultaneous Joule heating actuation and self‐sensing capabilities. Utilizing electrically controllable bilayers as building blocks, a flat geometry is designed and printed that morphs into a 3D self‐standing lifting robot, setting new records for weight‐normalized load lifted and actuation stress when compared to other 3D printed actuators. Furthermore, the ink palette is employed to create and print planar lattice structures that transform into various self‐supporting complex 3D shapes. These contributions are integrated into a 4D printed electrically controlled multigait crawling robotic lattice structure that can carry 144 times its own weight.


  • Multiscale Heterogeneous Polymer Composites for High Stiffness 4D Printed Electrically Controllable Multifunctional Structures

    by Javier M. Morales Ferrer, Ramón E. Sánchez Cruz, Sophie Caplan, Wim M. van Rees, J. William Boley

    4D printing is an emerging field where 3D printing techniques are used to pattern stimuli‐responsive materials to create morphing structures, with time serving as the fourth dimension. However, current materials utilized for 4D printing are typically soft, exhibiting an elastic modulus (E) range of 10−4 to 10 MPa during shape change. This restricts the scalability, actuation stress, and load‐bearing capabilities of the resulting structures. To overcome these limitations, multiscale heterogeneous polymer composites are introduced as a novel category of stiff, thermally responsive 4D printed materials. These inks exhibit an E that is four orders of magnitude greater than that of existing 4D printed materials and offer tunable electrical conductivities for simultaneous Joule heating actuation and self‐sensing capabilities. Utilizing electrically controllable bilayers as building blocks, a flat geometry that morphs into a 3D self‐standing lifting robot is designed and printed, setting new records for weight‐normalized load lifted and actuation stress when compared to other 3D printed actuators. Furthermore, this ink palette is employed to create and print planar lattice structures that transform into various self‐supporting complex 3D shapes. Finally these inks are integrated into a 4D printed electrically controlled multigait crawling robotic lattice structure that can carry 144 times its own weight.


  • Mechanically Rupturing Liquid Metal Oxide Induces Electrochemical Energy

    by Xing Ye, Zhaoyi Zheng, Jörg G. Werner, John William Boley

    Liquid metals, such as Gallium‐based alloys, have unique mechanical and electrical properties because they behave like liquid at room temperature. These properties make liquid metals favorable for soft electronics and stretchable conductors. In addition, these metals spontaneously form a thin oxide layer on their surface. Applications made possible by this delicate oxide skin include shape reconfigurable electronics, 3D‐printed structures, and unconventional actuators. This paper introduces a new approach where liquid metal oxide serves as an electrochemical energy source. By mechanically rupturing their surface oxide, liquid metals form a galvanic cell and convert their chemical energy to electrical energy. When dispersing liquid metals into an ionically‐conductive liquid to form emulsions, this composite material can provide ∼500 mV of open‐circuit voltage and up to ∼4 μW of power. Protected by the naturally occurring oxide skin, the passivating oxide layer of the liquid metal shields it from self‐discharge over time. The device is also stable in harsh environments, such as high temperature or aquatic conditions. Future applications of this device are demonstrated by designing a strain‐activated stretchable battery and a pressure‐sensitive self‐powered keypad. These findings may unlock new pathways to design stretchable batteries and harness their inherent energy for self‐powered robust devices.


  • Top Cited Papers

    Innervated, Self‐Sensing Liquid Crystal Elastomer Actuators with Closed Loop Control

    by Arda Kotikian, Javier M. Morales, Aric Lu, Jochen Mueller, Zoey S. Davidson, J. William Boley, Jennifer A. Lewis

    The programmable assembly of innervated LCE actuators (iLCEs) with prescribed contractile actuation, self‐sensing, and closed loop control via core–shell 3D printing is reported. This extrusion‐based direct ink writing method enables coaxial filamentary features composed of pure LM core surrounded by an LCE shell, whose director is aligned along the print path. Specifically, the thermal response of the iLCE fiber‐type actuators is programmed, measured, and modeled during Joule heating, including quantifying the concomitant changes in fiber length and resistance that arise during simultaneous heating and self‐sensing. Due to their reversible, high‐energy actuation and their resistive feedback, it is also demonstrated that iLCEs can be regulated with closed loop control even when perturbed with large bias loads. Finally, iLCE architectures capable of programmed, self‐sensing 3D shape change with closed loop control are fabricated.