IJIsma Javed

Isma Javed

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Isma Javed has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Bifunctional transmissive single-layer extreme-ultraviolet meta-waveplate

    by Rodgers Mutugi Gichuru, Isma Javed, Azhar Javed Satti, Edgar Owiti, Tibor Ajtai, Xuefeng Liu, Jichuan Xiong, Geofrey Kihara Rurimo, Muhammad Qasim Mehmood

    Multifunctional optical components in the extreme ultraviolet (EUV) are critical for advancing polarization-resolved spectroscopy and compact EUV imaging optical systems. Yet, transmissive devices capable of simultaneous wavefront and polarization control remain largely unavailable. This limitation arises from severe material absorption that hinders the efficient operation of EUV metasurfaces, and from the reliance of conventional EUV optics on bulky multilayer reflective elements with stringent alignment and surface-quality requirements. Here we demonstrate a single-layer EUV metalens operating at a design wavelength of λ = 55 nm that combines propagation phase with spin-dependent Pancharatnam-Berry (PB) phase using anisotropic vacuum-guided nanoholes etched in a crystalline-silicon membrane. A discrete set of birefringent meta-quarter-waveplate (meta-QWP) nanoholes provides complete 2 π phase coverage together with circular-to-linear polarization conversion, enabling two independent helicity-encoded phase channels. Numerical results show diffraction-limited focusing with transverse and axial full-width at half-maximum (FWHM) of ≈145 nm and ≈137 nm, respectively, consistent for both input circular polarizations, while the cross-polarized component acquires a vortex phase of opposite helicity having topological charge l = ±2 after polarization decomposition. The calculated focusing and polarization-conversion efficiencies of 16% and 17% confirm the device's multifunctional behavior. The design establishes a compact, spin-programmable EUV platform that unifies focusing, vector-beam formation, and polarization transformation within a single transmissive layer.

  • Open Access

    Twin‐Lever Multifunctional Meta‐Optics With High Longitudinal Tolerance

    by Isma Javed, Kyungtae Kim, Aqib Raza Shah, Dohyun Kang, Joohoon Kim, Azhar Javed Satti, Xuefeng Liu, Muhammad Zubair, Jichuan Xiong, Muhammad Qasim Mehmood, et al.

    Metasurfaces have transformed nanophotonics by enabling full vectorial control of light's amplitude, phase, and polarization within subwavelength‐thick structures, allowing functionalities unattainable with traditional refractive optics. achieving broad achromaticity and multifunctional operation on one flat platform is still a major challenge for imaging applications using metasurfaces. Additionally, current designs face limitations due to small longitudinal tolerance and aperture size. These issues create strict optical alignment requirements that make practical, real‐time use difficult. Here, we present a twin‐lever design strategy that achieves polarization‐programmable, achromatic broadband dual‐mode imaging (bright‐field focusing and vortex‐mediated edge‐enhanced imaging), with precise control over the axial position of maximum intensity through the aperture, all realized within an ultra‐compact, single‐layer metasurface architecture featuring high longitudinal tolerance. Comprehensive full‐wave simulations and experimental characterizations confirm chromatic‐aberration‐free focusing, spin‐selective phase fidelity, and high‐longitudinal tolerance with aperture‐weighted axial bias across the visible spectrum (488–633 nm). This CMOS‐compatible easy to operate platform establishes a foundation for reconfigurable, multimodal, and broadband optical systems, heralding a new class of intelligent meta‐optical components for next‐generation microscopy, imaging, and integrated photonic technologies.

  • Switchable multi-mode metalens for versatile bright-field and edge-enhanced imaging

    by Aqib Raza Shah, Eunji Lee, Isma Javed, Muhammad Ashar Naveed, Yeseul Kim, Hyunjung Kang, Joohoon Kim, Bin Ni, Bin Xu, Xuefeng Liu, et al.

    A compact dual-mode microscopy system integrates bright-field and edge-enhanced imaging into a single, tunable setup. The system employs a dual-mode metalens designed solely based on the geometric phase, ensuring simplicity and efficiency. By bonding a liquid-crystal (LC) cell onto the metasurface as a tunable birefringent layer, real-time switching between imaging modes is achieved by altering the spin state of the incident light. The metalens combines a hyperbolic phase profile for bright-field imaging with a spiral phase profile for isotropic edge enhancement, operating effectively across the visible spectrum. At 635 nm, it achieves efficiencies of 49.66% for left-handed circularly polarized and 49.23% for right-handed circularly polarized light, with higher performance at other wavelengths. This advancement holds potential for biomedical imaging, surface defect detection, and portable optical devices.


  • Open Access

    Nearly 180° Field‐of‐View Metalens for Miniaturized Imaging Systems

    by Azhar Javed Satti, Eunji Lee, Isma Javed, Kyungtae Kim, Joohoon Kim, Muhammad Ashar Naveed, Muhammad Zubair, Qammer H. Abbasi, Muhammad Qasim Mehmood, Junsuk Rho

    In the domain of commercial imaging systems, there is a growing demand for lenses with a wide field‐of‐view (WFOV) that can also operate over a broad bandwidth. However, significant axial and color dispersion have hindered their widespread adoption. An alternative approach involving the vertical stacking of multiple metalenses is proposed, but this method increases the complexity of the optical system, negating the primary benefits of reduced thickness and weight. This work addresses these challenges by introducing a single‐layer imaging lens that utilizes an advanced quadratic phase profile specifically engineered to achieve a WFOV. This lens system demonstrates a remarkably WFOV of ≈176°. Additionally, it is optimized for immediate compatibility with non‐polarized light and integrates with conventional color filters commonly used in most camera systems. These advancements have the potential to considerably enhance the incorporation of metalens technology into consumer electronics.


  • NeuroScopia: Smart Optical Imaging Solution for On-Site Applications

    by Muhammad Bilal Hassan, Isma Javed, Tauseef Tauqeer, Muhammad Asif Naveed, Muhammad Zubair, Muhammad Qasim Mehmood

    Microscopes are indispensable tools in research laboratories, educational institutions, and diagnostic centers. Despite the rapid technological advancements in scientific research, optical microscopy remains a cornerstone due to its non-invasive nature and extensive applications, including live-cell imaging, neuroscience, medical diagnostics, and environmental monitoring. Over time, significant advancements have been made in optical microscopy, focusing on improving efficiency, integrating smart technologies, and automating traditionally manual tasks. However, the integration of these functionalities has often resulted in increasingly complex and bulky hardware, restricting their application to controlled laboratory environments and thereby limiting their practicality for on-site research, fieldwork, educational outreach, and other real-world applications. Recently, 3D printing technology has emerged as a versatile and flexible method capable of producing highly customized systems and components for tailored optical microscopy solutions. This research article presents a compact, 3D-printed, modular, and cost-effective system containing a fully automated slide-scanning stage. The system is energy efficient, and its modular design allows easy customization. It features an integrated camera that captures images during slide scanning and a user-friendly interface that allows users to define the scanning area and magnification via touchscreen or physical buttons. Based on this information, dependent parameters are automatically calculated to complete the task without requiring additional information from the user, adding to the system's user-friendliness. The system utilizes a Raspberry Pi and Arduino Mega in a master-slave configuration, providing a stable workflow and a computational framework designed to support future AI and IoT functionalities integration through software-level updates, without requiring hardware modifications. Owing to its low cost, portability, and adaptability, this 3D-printed microscopy system offers a valuable solution for applications in research, diagnostics, education, and field-based operations, where compactness, automation, and accessibility are crucial.


  • Empowering communities in microscopy through place-based training and outreach models

    by Isma Javed, Muhammad Zubair, Muhammad Bilal Hassan, Humberto Cabrera, Qammer H. Abbasi, Muhammad Qasim Mehmood

    Quality education is a cornerstone of sustainable development, economic growth, and innovation. However, economic and technological constraints in developing countries often hinder access to advanced educational tools crucial for quality education, particularly in underrepresented fields like optics. On the contrary, these systems are available for selective students; however, the need is for the masses. This paper addresses these challenges by highlighting the potential of optics in driving innovation and economic growth through targeted education and training. In order to improve accessibility to advanced optical system education, a cost-effective, portable, and stand-alone digital holographic microscope (DHM) has been developed. The DHM system is an impactful commitment to quality education for optics by seamlessly integrating theoretical learning with hands-on through outreach initiatives. The DHM tabletop experimental setup aligns with Bloom’s taxonomy, addressing higher-order cognitive and psychomotor skills. Four key learning outcomes were mapped to respective phases of the experiment: analyzing holographic principles, operational setup, hologram processing, and 3D image reconstruction. This work demonstrates the DHM's potential to democratize quality education in terms of optics and foster innovation in resource-limited settings, contributing to sustainable development and economic growth.

  • Compact inverted digital holographic microscope based on common-path configuration

    by Isma Javed, Muhammad Bilal Hassan, Ramna Khalid, Masoomeh Dashtdar, Luis Guillermo Garcia, Carlo Fonda, Maria L. Crespo, Miltcho Danailov, Dan Cojoc, Muhammad Zubair, et al.

    Ongoing advancements in holographic imaging technology have a considerable impact in various fields, specifically life sciences, owing to the 3D and precise visualization of microscopic structures. However, present-day imaging technologies, such as confocal, multiphoton microscopy, and digital holography microscopy, face constraints such as tagging bulky and expensive components. Its functionality requires specific laboratory conditions and relies on relatively complicated alignment mechanics. To address these limitations, we have proposed a compact label-free, easy-to-align imaging solution, which is what we believe to be a state-of-the-art inverted holographic 3D-printed microscopy prototype based on common-path holographic configuration compatible with high numerical aperture objectives. The microscope has several advantages, including simplicity, robustness, high temporal stability, and compatibility with other imaging modalities, and it is standalone. The designed architecture is automated by using the controller and sophisticated designed stages, making it a self-focusing device along all three axes. The cutting-edge prototype presented here influences pioneering light field technology, providing simplification of the optical setup and improvement of robustness as well as real-time monitoring of live organisms and transparent samples. These features enable its applicability for in-field measurements without using an antivibration optical table. The proposed device not only overwhelms the flaws of existing technologies but also opens up new ventures for future in-field life sciences applications, to our knowledge.


  • Harmonic achromatic metalens with a wide field of view for AR/VR applications

    by Badar Nasir, Isma Javed, Muhammad Ashar Naveed, Khaled A Aljaloud, Saad Alhuwimel, Rifaqat Hussain, Muhammad Qasim Mehmood

    Metalens is a cutting-edge optical marvel, revolutionizes a plethora of applications like cameras, telescope, augmented reality (AR) and virtual reality (VR). Despite having ultrathin structure, lightweight nature, and multifunctionality, achievement of both achromatic imaging and wide field of view (WFOV) remains a persistent challenge. To address these concerns, here we present a novel approach using a harmonic metalens featuring a quadratic phase profile to achieve achromatic behavior and WFOV simultaneously. This innovation enables WFOV imaging using the Fourier transform of quadratic phase profile and achromatic behavior at RGB wavelengths (blue λ = 488 nm, green λ = 532 nm and red λ = 633 nm) with a WFOV of up to ± 45 ∘ . The designed harmonic metalens is polarization-insensitive, with a numerical aperture of 0.79, and it achieves a maximum focusing efficiency of ∼50% at a wavelength of 633 nm under normal incidence. Being polarization insensitive and achromatic, proposed scheme will certainly broaden the utilization of metalenses in AR/VR, displays and applications in imaging. © 2024 Optical Society of America.


  • A flexible tri-band inverted c-shaped conformal antenna for on-body communications

    by Abdul Jabbar, Muhammad Ashar Naveed, Isma Javeed, Muhammad Qasim Mehmood

    - A tri-band, compact, flexible, and wearable antenna is simulated, numerically analyzed, and fabricated for on-body wireless body area network (WBAN) communication applications. The flexible design of the antenna is capable of operating at three different frequencies 2.45 GHz for the Industrial Scientific Medical band (ISM), 3.5 GHz for WiMAX, and 5.2 GHz for Wireless Local Area Network. The overall design dimensions are 2618×0.543mm3; the proposed antenna design is a combination of inverted C-shaped patches, a defective ground plane, and a microstrip feed line. The antenna layout is developed in CST Microwave Studio and then fabricated on polymer-based substrate Roger 5880. The antenna's maximum gain, 2.34 dBi, is attained at 5.2 GHz, while its minimum gain, 1.2 dBi, is seen at 2.45 GHz. When the antenna is working at 2.45 GHz, the maximum radiation efficiency is around 79.25 %. Additionally, bending analysis of design is numerically evaluated along x- and y-axes at three distinct radii of 20, 40, and 60 mm, respectively. The antenna is also tested on a human phantom model to predict on-body exploration of the specific absorption rate (SAR). All experimental and simulation results regarding this antenna are suitable for body-worn emerging applications.

  • HoloLume: point-of-application holographic imaging solution

    by Isma Javed, Ramna Khalid, Muhammad Bilal Hassan, Masoomeh Dashtdar, Miltcho Danailov, Muhammad Zubair, Humberto Cabrera, Muhammad Qasim Mehmood

    Digital holographic imaging has emerged as a label-free, non-invasive, and powerful tool, offering a transformative method for the real-time investigation of morphology, density, and other physical and mechanical features of non-biological and biological samples. The rapid development of these portable, economical imaging systems for clinical/non-clinical setups, especially in remote areas, is of great interest. These systems are early point-of-care applications in diagnosis, research, education, and training. This article reports a general-purpose, fully automated portable imaging tool, ‘HoloLume,’ that offers high-resolution 3D imaging that facilitates the comprehensive understanding and analysis of different media. The proposed microscopic system HoloLume realizes the interferograms generation of samples using common-path optics configuration based on a Fresnel biprism, and its motorized stage precisely scans the whole sample with a step of 3.87 μm for quick identification of the region of interest, which makes sure a time-efficient and robust analysis. The prototype, assembled from off-the-shelf components, costs approximately USD ∼776 and weighs around 3 kg. To validate and verify the performance of the HoloLume microscope, we have conducted experiments on both non-biological and biological samples. Thus, its non-invasive nature, high temporal stability, and economical lightweight prototyping make it an ideal choice for hands-on learning and quantitative analysis, reducing the need for time-consuming sample preparation and conventionally expensive microscopic systems. Furthermore, the adaptability of the proposed imaging tool to remote environments ensures wider accessibility and its easy integration with other imaging modalities enables a compact and cost-effective solution for advanced research and in field measurements.