Vitali Czymmek

Weed management, particularly in organic farming, poses a significant challenge due to high manual labor costs and the crop’s low competitive ability. Precision laser technology offers a promising non-chemical alternative. This study evaluates the field performance of a novel robotic system based on a Thulium fiber laser. The validation was conducted on commercial fields of the Westhof Bio GmbH in Friedrichsgabekoog, Germany. The Weeding Success rate of the laser weeding robot was 95% and the Detection Rate 85% for carrots for one weeding cycle. For beetroot, these values are 98% and 88%, respectively, after two weeding cycles. The field trials validate the Thulium fiber laser system as an agronomically effective and economically viable alternative for sustainable weed management. The technology demonstrates the potential to significantly reduce manual labor and reliance on herbicides in challenging crops.

Manual weed control is becoming increasingly costly, necessitating the development of alternative methods. This work investigates the feasibility of using laser technology for autonomous weed regulation. We developed a system utilizing a laser scanner to target and eliminate weeds, which was first tested using a pilot laser for accuracy and performance. Subsequently, the system was upgraded with a high-power fiber laser. Experimental results demonstrated a high weed destruction accuracy with real-time capabilities. The system achieved efficient weed control with minimal environmental impact, providing a potential alternative for sustainable agriculture.

The sustainable cultivation of organic vegetables and the associated problem of weed control has been a current research topic for some time. Despite this, the use of chemical and synthetic pesticides increases every year. This is to be solved with the help of an automated robot system. The current version of the weeding robot uses GPUs to execute the inference phase. This requires a lot of energy for an 8-track robot. To enable autonomous solar operation, the system must be made more energy efficient. This work aims to evaluate possible approaches and the current state of research on implementing convolution neural networks on low power embedded systems. In the course of the work, the technical feasibility for the implementation of CNNs in FPGAs was examined, in particular, following the example of a feasibility analysis. This paper shows that the acceleration of convolution neural networks using FPGAs is technically feasible for use as detection hardware in the weeding robot. With the help of the current state of research and the existing literature, the optimization possibilities of the hardware and software have been evaluated. The trials of different networks on different hardware accelerators with diverse approaches were investigated and compared.