Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Piyawong Poopanya has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Coupled Electromagnetic-Thermal Multiphysics Analysis and Design Optimization of a Microwave Kiln

    by Chawit Samakkarn, Piyawong Poopanya, Jatuporn Thongsri

    This study presents a multiphysics investigation of a microwave kiln for the glass-casting process, focusing on the coupled interaction between electromagnetic heating and thermal responses. The kiln (SiC-based) was experimentally tested in a household 800 W, 2450 MHz microwave oven without rotation for 5 min, with temperatures recorded at key positions using thermocouples and verified by thermal imaging. The computational framework integrates ANSYS (2021R1) High-Frequency Structure Simulator (HFSS) for electromagnetic-field and heat-generation prediction with Transient Thermal Analysis (TTA) for time-dependent temperature distribution. Validation showed agreement between simulation and experiment of the final temperature, with most errors below 4%, confirming the model’s reliability. A parametric study revealed that a thin SiC susceptor layer (1.5–2.0 mm) improves heat generation and temperature uniformity, while excessive thickness reduces heating efficiency. The optimized design improved the temperature by 2.58% compared with the original configuration at 800 W and achieved up to 38.44% improvement under specific operating conditions. These findings demonstrate that the proposed multiphysics method can support future development of small-scale glass-casting systems and sustainable recycled-glass production. Consequently, the work paves the way to Sustainable Development Goals (SDGs).

  • Open Access

    Capacity Forecasting of Lithium-Ion Batteries Using Empirical Models: Toward Efficient SOH Estimation with Limited Cycle Data

    by Kanchana Sivalertporn, Piyawong Poopanya, Teeraphon Phophongviwat

    Accurate prediction of lithium-ion battery capacity degradation is crucial for reliable state-of-health estimation and long-term performance assessment in battery management systems. This study presents an empirical modeling approach based on experimental data collected from four lithium iron phosphate (LFP) battery packs cycled over 75 to 100 charge–discharge cycles. Several mathematical models—including linear, quadratic, single-exponential, and double-exponential functions—were evaluated for their predictive accuracy. Among these, the linear and single-exponential models demonstrated strong performance in early-cycle predictions. It was found that using 30 to 40 cycles of data is sufficient for reliable forecasting within a 100-cycle range, reducing the mean absolute error by over 80% compared to using early-cycle data alone. Although these models provide reasonable short-term predictions, they fail to capture the nonlinear degradation behavior observed beyond 80 cycles. To address this, a modified linear model was proposed by introducing an exponentially decaying slope. The modified linear model offers improved long-term prediction accuracy and robustness, particularly when data availability is limited. Capacity forecasts based on only 40 cycles yielded results comparable to those using 100 cycles, demonstrating the model’s efficiency. End-of-life estimates based on the modified linear model align more closely with typical LFP specifications, whereas conventional models tend to underestimate the cycle life. The proposed model offers a practical balance between computational simplicity and predictive accuracy, making it well suited for battery health diagnostics.


  • Open Access

    Quantitative Assessment of EV Energy Consumption: Applying Coast Down Testing to WLTP and EPA Protocols

    by Teeraphon Phophongviwat, Piyawong Poopanya, Kanchana Sivalertporn

    This study presents a comprehensive methodology for evaluating electric vehicle (EV) energy consumption by integrating coast down testing with standardized chassis dynamometer protocols under WLTP Class 3b and EPA driving cycles. Coast down tests were conducted to determine road load coefficients—critical for replicating real-world resistance profiles on a dynamometer. Energy usage data were measured using On-Board Diagnostics II (OBD-II) and dynamometer measurements to assess power flow from the battery to the wheels. The results reveal that OBD-II consistently recorded higher cumulative energy usage, particularly under urban driving conditions, highlighting limitations in dynamometer responsiveness to transient loads and regenerative events. Notably, the WLTP low-speed cycle exhibited a significantly lower efficiency of 62.42%, with nearly half of the battery energy consumed by non-propulsion systems. In contrast, the EPA cycle demonstrated consistently higher efficiencies of 84.52% (low-speed) and 93.00% (high-speed). Interestingly, high-speed efficiencies between WLTP and EPA were nearly identical, despite differences in total energy consumption. These findings underscore the importance of aligning test protocols with actual driving conditions and demonstrate the effectiveness of combining coast down data with real-time diagnostics for robust EV performance assessments.


  • Open Access

    Capacity Forecasting of Lithium-Ion Batteries Using Empirical Models: Toward Efficient SOH Estimation with Limited Cycle Data

    by Kanchana Sivalertporn, Piyawong Poopanya, Teeraphon Phophongviwat

    Accurate prediction of lithium-ion battery capacity degradation is essential for reliable state of health (SOH) estimation and long-term performance assessment in battery management systems. This study presents an empirical modeling approach for capacity degradation using experimental data collected from four lithium iron phosphate (LFP) battery packs over 75 to 100 charge–discharge cycles. Several mathematical models, including linear, quadratic, single-exponential, and double-exponential functions, were evaluated for their predictive accuracy. The linear and single-exponential models demonstrated superior robustness for early-cycle prediction, while a novel modified-linear model, incorporating an exponentially decaying slope, was proposed to capture nonlinear degradation trends beyond the initial aging phase. The study further investigates the minimum number of data points required for reliable long-term prediction and finds that approximately 30 to 40 cycles are sufficient to achieve high accuracy, with mean absolute error reduced by over 80% compared to early-cycle prediction alone. The modified-linear model outperforms traditional approaches in forecasting SOH and end-of-life (EOL), particularly under extended cycling conditions, providing a practical balance between computational simplicity and predictive fidelity.


  • Enhancing thermoelectric performance of p-type Mg2Si through doping: A first-principles study

    by Piyawong Poopanya, Saowalak Siatrakool, Pratik M. Gadhavi, Kanchana Sivalertporn

  • Open Access

    The Development of a High-Efficiency Small Induction Furnace for a Glass Souvenir Production Process Using Multiphysics

    by Jatuporn Thongsri, Piyawong Poopanya, Sanguansak Sriphalang, Sorathorn Pattanapichai

    A small induction furnace (SIF), which has the important components of copper coils, a ceramic jig, and a graphite crucible, employed for a glass souvenir production process, has been developed as a form of clean technology for multiphysics, consisting of electromagnetics analysis (EA) and thermal analysis (TA). First, two experiments were established to measure parameters for multiphysics results validation and boundary condition settings. Then, the parameters were applied to multiphysics, in which the EA revealed magnetic flux density (B) and ohmic losses, and the TA reported a temperature consistent with the experimental results, confirming the multiphysics credibility. Next, a ferrite flux concentrator was added to the SIF during development. Multiphysics revealed that PC40 ferrite, as a flux concentrator with a suitable design, could increase B by about 159% compared to the conventional SIF at the power of 1000 W. As expected, the B increases alongside the increase in power applied to the coils, and is more densely concentrated in the flux concentrator than in other regions, enhancing the production process efficacy. Lastly, the developed SIF was employed in the actual process and received good feedback from users. The novel research findings are the developed SIF and methodology, exclusively designed for this research and practically employed for a glass souvenir production process.