ANAnh T. Ngo

Anh T. Ngo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Anh T. Ngo has a total of 108 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Anomalous ultrafast lithium-ion transport through boron nitride nanotube membranes

    by Semih Cetindag, Aaditya Pendse, Pavel Rehak, Volodymyr Koverga, Selva C. Selvaraj, Naveen K. Dandu, Roya Jafari, Richard J. Castellano, Matthew Howard, Kun Wang, et al.

    Here we studied the aqueous transport of different alkali-metal ions in charged boron nitride nanotubes (BNNTs) and compared the results with those obtained in carbon nanotubes, using macroscopic, vertically aligned nanotube membranes at densities up to 107 pores cm-2. Our study reveals that ion transport in 3- and 12-nm-diameter charged BNNTs is fundamentally different from that in either carbon nanotubes of a similar size, or two-dimensional boron nitride nanochannels. We find two unexpected transport phenomena: ultrafast, cation-selective diffusion that exceeds Fickian diffusion up to 31-fold; and preferentially enhanced transport rates for Li+ over other alkali-metal ions (K+ and Na+) that are opposite to the ordering of their mobilities in bulk solution. We show that the overall fast transport of cations is due to diffusio-osmotic surface transport, while the preferentially enhanced transport of Li+ is believed to result from ion-specific interactions with the charged BNNTs. As a result of enhanced and cation-selective transport, the BNNT membranes produced per-pore osmotic-power densities up to 15,300 W m-2 in a 1 mM:1 M LiCl concentration gradient at pH 11. The energy-conversion efficiency approached the theoretical limit of 50% at pH 5.5. As a demonstration, we power a calculator, watch and light-emitting diode using 1-cm2 BNNT membranes in a salinity gradient. The unusual transport phenomena in BNNTs, as well as the flexible and scalable membrane-fabrication process, may enable ion-selective nanotube membranes optimized for lithium recovery, 'blue' osmotic energy and other separation and energy-conversion processes.


  • Open Access

    Pathways for sustainable reaction kinetics in Li-CO2 batteries

    by Ilias Papailias, Arash Namaeighasemi, Musawenkosi K. Ncube, Roshan Y. Nemade, Naveen Dandu, Nikhil Rai, Syed Ibrahim Gnani Peer Mohamed, Hessam Shahbazi, Suchit Sarin, Ahmad Jaradat, et al.

    Lithium-carbon dioxide batteries hold great promise for high-energy-density storage applications. However, advancing this technology as a sustainable alternative to Li-ion systems requires a deeper understanding of the underlying reaction mechanisms, which remain elusive. A key challenge stems from the added complexity introduced by the presence of oxygen in CO2 environment. In this study, we employ a stable Cu3(VBi)0.5Se4 mid-entropy catalyst and conduct comprehensive investigation to uncover the underlying reaction mechanisms in Li-CO2 batteries under varying CO2/O2 ratios. Under pure CO2 conditions, the battery shows extended rechargeability, sustaining up to 1200 cycles at a current density of 0.2 mA/cm2 and capacity of 0.1 mAh/cm2. However, at high current densities, the discharge potential drops significantly (below 2.0 V), primarily due to sluggish reaction kinetics caused by solid carbon formation. Interestingly, introducing O2 mitigates this limitation, leading to a 58% increase of the discharge potential (from 1.7 V to 2.7 V) at the current density of 0.8 mA/cm2, signifying a substantial boost in energy output. Our results reveal that the reactions follow distinct pathways, shifting from surface- to solution-based mechanism, and even exhibit coexistence of both mechanisms, depending on the CO2/O2 ratio. These findings offer useful insights for designing sustainable Li-gas batteries utilizing CO2 and O2 mixtures.


  • Open Access

    Predictive Machine Learning Molecular Dynamics of SEI Formation in Concentrated LiTFSI and LiPF6 Electrolytes for Lithium Metal Batteries

    by Syed Mustafa Shah, Mohammed Lemaalem, Anh T. Ngo

    High-energy-density lithium metal batteries require electrolytes that enable fast ion transport and form a stable solid-electrolyte interphase (SEI) to sustain high-rate cycling, a process that remains challenging to capture experimentally. Here, we develop a Deep Potential-based machine learning molecular dynamics (MLMD) framework, trained on extensive ab initio datasets and validated against experimental transport properties, to resolve early-stage SEI nucleation at lithium metal interfaces with quantum accuracy. We find that at the Li-metal interface, 3.5 M LiTFSI/DMC induces spontaneous, thermally activated reduction reactions, yielding rapidly growing thick anion-derived SEIs enriched in O/F-containing species. In contrast, 1.5-2.5 M LiTFSI/DMC and 1 M LiPF6/EMC/DMC/EC form thinner, LiF-dominated interphases with slower growth kinetics. Our modeling results are consistent with experimental observations, where 3.5 M LiTFSI enhances cycling stability and rate capability, while lower concentrations result in weaker passivation. Our MLMD framework efficiently captures the electrolyte transport and early-stage SEI formation mechanisms in LMBs.

  • Open Access

    Ionic Interdiffusion at Cathode-Solid-Electrolyte Interface: A Machine Learning-Assisted Multiscale Investigation and Mitigation Strategies

    by Musawenkosi K. Ncube, Pallab Barai, Selva Chandrasekaran Selvaraj, Larry A. Curtiss, Anh T. Ngo, Venkat Srinivasan

    Future lithium-based batteries are expected to use solid electrolytes to achieve higher energy density and fast charge capabilities. The majority of solid electrolytes are thermodynamically unstable against layered oxide cathodes. Here, the stability of LiCoO2 (LCO) cathode with Li10GeP2S12 (LGPS) solid electrolyte is investigated using ab initio molecular dynamics (AIMD) and machine learning molecular dynamics (MLMD). The propensity of ionic interdiffusion, formation of a passivation layer, and corresponding decay in cell performance is addressed using a continuum model. The large-scale MLMD simulations confirm that the LCO|LGPS interface permits interdiffusion of Co and other ionic species, leading to the formation and growth of a resistive interphase and dramatic capacity fade even in the first cycle. We then examine the literature evidence that incorporating a thin layer of LiNb0.5Ta0.5O3 (LNTO) between LCO and LGPS prevents the interdiffusion of ions. Atomistic simulations suggest that the substitution of Li in LNTO with Co is not thermodynamically favorable, which helps to minimize the ionic interdiffusion process. The stable Nb/Ta5+ states form a rigid metal-oxide framework, which consequently also prevents the substitution of Nb/Ta. However, continuum level analysis suggests that due to the higher mechanical stiffness of LNTO, interfacial delamination between the LCO and LNTO is possible, which can minimize the effectiveness of the protective layer. This paper suggests the need for the development of novel interlayers that balance low interdiffusion with low stiffness.

  • Top Cited Papers

    Overcoming the conversion reaction limitation at three-phase interfaces using mixed conductors towards energy-dense solid-state Li–S batteries

    by Daiwei Wang, Bharat Gwalani, Dominik Wierzbicki, Vijay Singh, Li-Ji Jhang, Tomas Rojas, Rong Kou, Meng Liao, Lei Ye, Heng Jiang, et al.

    Lithium–sulfur (Li–S) all-solid-state batteries (ASSBs) hold great promise for next-generation safe, durable and energy-dense battery technology. However, solid-state sulfur conversion reactions are kinetically sluggish and primarily constrained to the restricted three-phase boundary area of sulfur, carbon and solid electrolytes, making it challenging to achieve high sulfur utilization. Here we develop and implement mixed ionic–electronic conductors (MIECs) in sulfur cathodes to replace conventional solid electrolytes and invoke conversion reactions at sulfur–MIEC interfaces in addition to traditional three-phase boundaries. Microscopic and tomographic analyses reveal the emergence of mixed-conducting domains embedded in sulfur at sulfur–MIEC boundaries, helping promote the thorough conversion of active sulfur into Li2S. Consequently, substantially improved active sulfur ratios (up to 87.3%) and conversion degrees (>94%) are achieved in Li–S ASSBs with high discharge capacity (>1,450 mAh g–1) and long cycle life (>1,000 cycles). The strategy is also applied to enhance the active material utilization of other conversion cathodes.


  • Top Cited Papers

    Enhancing lithium-metal battery longevity through minimized coordinating diluent

    by Guo-Xing Li, Volodymyr Koverga, Au Nguyen, Rong Kou, Musawenkosi Ncube, Heng Jiang, Ke Wang, Meng Liao, Hanzeng Guo, Jun Chen, et al.


  • Exploring solvation structure and transport behavior for rational design of advanced electrolytes for next generation of lithium batteries

    by Xiaozhao Liu, Volodymyr Koverga, Hoai T. Nguyen, Anh T. Ngo, Tao Li

    The efficacy of electrolytes significantly affects battery performance, leading to the development of several strategies to enhance them. Despite this, the understanding of solvation structure remains inadequate. It is imperative to understand the structure–property–performance relationship of electrolytes using diverse techniques. This review explores the recent advancements in electrolyte design strategies for high capacity, high-voltage, wide-temperature, fast-charging, and safe applications. To begin, the current state-of-the-art electrolyte design directions are comprehensively reviewed. Subsequently, advanced techniques and computational methods used to understand the solvation structure are discussed. Additionally, the importance of high-throughput screening and advanced computation of electrolytes with the help of machine learning is emphasized. Finally, future horizons for studying electrolytes are proposed, aimed at improving battery performance and promoting their application in various fields by enhancing the microscopic understanding of electrolytes.


  • Open Access

    Impact of Electron-Withdrawing Groups on Ion Transport and Structure in Lithium Borate Ionic Liquids

    by Volodymyr Koverga, Selvaraj S. Chandrasekaran, Anh T. Ngo

    Among the distinctive structural features of lithium ionic liquids (LILs), a novel class of single-component electrolytes, the variation of the electron-withdrawing group stands out as a key factor in determining their dynamics. To understand this phenomenon, we conducted molecular dynamics (MD) simulations for LILs based on hexafluoro-2-propanoxy (LIL2), hexafluoro-2-methyl-2-propanoxy (LIL4), and trifluoro-2-propanoxy (LIL6) derivatives. Results revealed that correlated ion dynamics govern the general transport characteristics in LILs, while the electron-withdrawing group regulates the Li transport mechanism. Upon saturation by fluorine atoms, LILs exhibit higher inhomogeneity in their transport and structure properties. Strong coordination along the ethoxide group promotes jumps of Li across positive domains, while in fluorine-poor LILs, stronger coordination in proximity to boron atoms carries the anion along Li transport. Understanding the results of MD simulation will aid the further design and widespread use of this class of electrolytes in production of the energy storage and conversion devices


  • Top Cited Papers

    Single-phase local-high-concentration solid polymer electrolytes for lithium-metal batteries

    by Weiran Zhang, Volodymyr Koverga, Sufu Liu, Jigang Zhou, Jian Wang, Panxing Bai, Sha Tan, Naveen K. Dandu, Zeyi Wang, Fu Chen, et al.


  • Open Access

    Delocalized polaron and Burstein-Moss shift induced by Li in $α$-$\textrm{V}_{2}\textrm{O}_{5}$: DFT+DMFT study

    by Huu T. Do, Alex Taekyung Lee, Hyowon Park, Anh T. Ngo

    We performed density functional theory (DFT)+$U$ and dynamical mean field theory (DMFT) calculations with continuous time quantum Monte Carlo impurity solver to investigate the electronic properties of V$_2$O$_5$ and Li$_x$V$_2$O$_5$ ($x$ = 0.125 and 0.25). Pristine V$_2$O$_5$ is a charge-transfer insulator with strong O $p$-V $d$ hybridization, and exhibits a large band gap ($E_{\textrm{gap}}$) as well as non-zero conduction band (CB) gap. We show that the band gap, the number of $d$ electrons of vanadium, $N_d$, and conduction band (CB) gap for V$_2$O$_5$ obtained from our DMFT calculations are in excellent agreement with the experimental values. While the DFT+$U$ approach replicates the experimental band gap, it overestimates the value of $N_d$ and underestimates the CB gap. In the presence of low Li doping, the electronic properties of V$_2$O$_5$ are mainly driven by a polaronic mechanism, the electron spin resonance and electron nuclear double resonance spectroscopies observed the coexistence of free and bound polarons. Notably, our DMFT results identify both polaron types, with the bound polaron being energetically preferred, while DFT+$U$ method predicts only the free polaron. Our DMFT analysis also reveals that increased Li doping leads to electron filling in the conduction band, shifting the Fermi level, this result consistent with the observed Burstein-Moss shift upon enhanced Li doping and we thus demonstrate that the DFT+DMFT approach can be used for accurate and realistic description of strongly correlated materials.