Tobias Fehrenbach
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tobias Fehrenbach has a total of 183 co-authors. Here are the top co-authors by number of shared publications:
- Abbas Nikroo
Lawrence Livermore National Laboratory 1 , Livermore, California 94550
9 shared publications - Casey Kong
General Atomics 2 , P.O. Box 85608, San Diego, California 92186-5608
9 shared publications - Christopher R. Weber
Lawrence Livermore National Laboratory , Livermore, California 94550
9 shared publications - Daniel S. Clark
Lawrence Livermore National Laboratory 1 , Livermore, California 94550
9 shared publications - Michael Stadermann
Lawrence Livermore National Laboratory 1 , Livermore, California 94550
9 shared publications - Christoph Wild
Diamond Materials GmbH 3 , Freiburg 78108
8 shared publications
Latest Publications
- 24 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (77)
1 3 C Nanocrystalline Diamond Capsules: Fabrication, Characterization, and Opportunities for High‐Energy‐Density Experiments
Nanocrystalline diamond (NCD) targets have recently enabled inertial confinement fusion (ICF) ignition at the National Ignition Facility (NIF), with gains exceeding the input laser energy. Achieving ignition requires NCD targets with carefully tuned density profiles and high material uniformity to minimize fuel‐ablator mix. Here, we report on the fabrication of high‐isotopic‐purity 13 C‐NCD capsules with a 13 C/ 12 C ratio greater than 100 and a density of 3.64 g cm −3 , 8% higher than comparable 12 C‐NCD coatings. The higher density shortens shock transit times, offering symmetry control advantages and enabling density gradient tuning across NCD/W‐NCD interfaces for improved implosion stability. 13 C‐NCD also opens a new diagnostic platform for studying fuel‐ablator mix and yield in NIF ICF experiments through 13 N production via the 13 C(p,n) 13 N reaction. Leveraging high isotopic purity of 13 C‐NCD coatings, we perform quantitative characterization of non‐diamond carbon phases using solid‐state direct‐polarization nuclear magnetic resonance (NMR) spectroscopy. This reveals the presence of hydrogenated carbon (2.9 at.%), graphitic carbon (0.5 at.%), and tetrahedral amorphous carbon (0.4 at.%), yielding previously unavailable insight into NCD ablator composition and structure. This work clarifies the nature of NCD ablator shells and lays the foundation for new target designs that exploit 13 C‐NCD's higher density and enable diagnostics for ICF experiments.
- 24 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (77)
1 3 C Nanocrystalline Diamond Capsules: Fabrication, Characterization, and Opportunities for High‐Energy‐Density Experiments
Nanocrystalline diamond (NCD) targets have recently enabled inertial confinement fusion (ICF) ignition at the National Ignition Facility (NIF), with gains exceeding the input laser energy. Achieving ignition requires NCD targets with carefully tuned density profiles and high material uniformity to minimize fuel‐ablator mix. Here, we report on the fabrication of high‐isotopic‐purity 13 C‐NCD capsules with a 13 C/ 12 C ratio greater than 100 and a density of 3.64 g cm −3 , 8% higher than comparable 12 C‐NCD coatings. The higher density shortens shock transit times, offering symmetry control advantages and enabling density gradient tuning across NCD/W‐NCD interfaces for improved implosion stability. 13 C‐NCD also opens a new diagnostic platform for studying fuel‐ablator mix and yield in NIF ICF experiments through 13 N production via the 13 C(p,n) 13 N reaction. Leveraging high isotopic purity of 13 C‐NCD coatings, we perform quantitative characterization of non‐diamond carbon phases using solid‐state direct‐polarization nuclear magnetic resonance (NMR) spectroscopy. This reveals the presence of hydrogenated carbon (2.9 at.%), graphitic carbon (0.5 at.%), and tetrahedral amorphous carbon (0.4 at.%), yielding previously unavailable insight into NCD ablator composition and structure. This work clarifies the nature of NCD ablator shells and lays the foundation for new target designs that exploit 13 C‐NCD's higher density and enable diagnostics for ICF experiments.
- 1 June 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (6)
Influence of the drive design on ablation front hydrodynamic instability growth in a capsule implosion at the National Ignition Facility
A critical aspect of inertial confinement fusion experiments lies in the control of ablation front instabilities during the implosion process. The growth of Rayleigh–Taylor and Richtmyer–Meshkov instabilities, seeded by target defects, can significantly degrade the performance of the implosion. This study explores the influence of drive design on ablation front stability using the hydro-growth radiography platform at the National Ignition Facility. This platform allows the measurement of the ablation front hydrodynamic instability growth. Because these measurements are restricted to early convergence, their primary role is to constrain the initial instability growth and benchmark the simulations used to infer shell integrity and performance at peak velocity and ignition. Three ignition designs, Hybrid-E (HyE), SQ-n (“S” for scaling and “Q” for quality), and High temperature, High thickness (HiT) were analyzed. The results demonstrated a high dependence of the growth factor on the choice of design, capsule scale as well as the hohlraum conditions, mainly the radiative temperature and the gold M-band emission. HyE and SQ-n display a similar growth factor range, but their evolution is different due to the design differences in hohlraum conditions. HiT has the lowest growth factor of the studied designs, which is a result of a higher radiative temperature. These results highlight the importance of design choices in controlling instability dynamics. These insights inform future drive design strategies to enhance stability and efficiency in fusion ignition experiments.
- 1 June 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (6)
Influence of the drive design on ablation front hydrodynamic instability growth in a capsule implosion at the National Ignition Facility
A critical aspect of inertial confinement fusion experiments lies in the control of ablation front instabilities during the implosion process. The growth of Rayleigh–Taylor and Richtmyer–Meshkov instabilities, seeded by target defects, can significantly degrade the performance of the implosion. This study explores the influence of drive design on ablation front stability using the hydro-growth radiography platform at the National Ignition Facility. This platform allows the measurement of the ablation front hydrodynamic instability growth. Because these measurements are restricted to early convergence, their primary role is to constrain the initial instability growth and benchmark the simulations used to infer shell integrity and performance at peak velocity and ignition. Three ignition designs, Hybrid-E (HyE), SQ-n (“S” for scaling and “Q” for quality), and High temperature, High thickness (HiT) were analyzed. The results demonstrated a high dependence of the growth factor on the choice of design, capsule scale as well as the hohlraum conditions, mainly the radiative temperature and the gold M-band emission. HyE and SQ-n display a similar growth factor range, but their evolution is different due to the design differences in hohlraum conditions. HiT has the lowest growth factor of the studied designs, which is a result of a higher radiative temperature. These results highlight the importance of design choices in controlling instability dynamics. These insights inform future drive design strategies to enhance stability and efficiency in fusion ignition experiments.
- Open Access
- 16 February 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (7)
Wafer-scale epitaxial growth of AlN (0001) on heteroepitaxial diamond (111)
Wurtzite-type aluminum nitride (AlN) films were deposited by magnetron sputtering epitaxy (MSE) on wafer-scale diamond layers, which in turn were grown heteroepitaxially by plasma-enhanced chemical vapor deposition applying bias-enhanced nucleation on an Ir seed layer. The seed was fabricated on Si (111) wafers with an yttria-stabilized zirconia buffer layer by MSE. Analysis by x-ray diffraction has confirmed fully epitaxial growth throughout the entire stack. Due to diamond's high thermal conductivity, which makes it an effective heat sink, this stack constitutes an important step toward monolithically integrated high-efficiency III-nitride-diamond power electronics.
- 16 February 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (7)
Open AccessWafer-scale epitaxial growth of AlN (0001) on heteroepitaxial diamond (111)
Wurtzite-type aluminum nitride (AlN) films were deposited by magnetron sputtering epitaxy (MSE) on wafer-scale diamond layers, which in turn were grown heteroepitaxially by plasma-enhanced chemical vapor deposition applying bias-enhanced nucleation on an Ir seed layer. The seed was fabricated on Si (111) wafers with an yttria-stabilized zirconia buffer layer by MSE. Analysis by x-ray diffraction has confirmed fully epitaxial growth throughout the entire stack. Due to diamond's high thermal conductivity, which makes it an effective heat sink, this stack constitutes an important step toward monolithically integrated high-efficiency III-nitride-diamond power electronics.
- Open Access
- 1 December 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (12)
First demonstration of improved yield with reduced adiabat in inertial confinement fusion implosions on the National Ignition Facility
Laser-driven, indirect-drive inertial confinement fusion (ICF) experiments at the National Ignition Facility (NIF) recently achieved a target gain greater than one, where fusion energy output exceeds input laser energy [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)]. Despite this milestone, gain levels remain insufficient for practical applications such as inertial fusion energy, making performance improvement critical. One promising approach is increasing fuel compression by lowering the implosion adiabat. To explore reduced adiabat, experiments were conducted modifying the laser pulse shape and shock timing of an existing 1.9-MJ-drive implosion design performing near the ignition cliff [Abu-Shawareb et al., Phys. Rev. Lett. 129, 075001 (2022)]. These experiments demonstrated increased compression and fusion yield in ICF implosions at the NIF by using a lower fuel adiabat, and increased compression with a reduced adiabat in high-density carbon ablators. The updated design achieved up to 80% higher fusion yield and 14% greater fuel compression compared to the previous best-performing 1.9-MJ experiment, with repeatable performance, and is the only implosion design to achieve a target gain exceeding one with < 2.04 MJ laser energy. Notably, this work was made possible because of recent advances in target quality and pulse shape control allowing experimental access to the ignition regime, and thereby increased sensitivity to adiabat. This work addresses a long-standing question in ICF research and lays the foundation for higher target gains through optimized implosion strategies. It underscores the potential of reduced adiabat designs to enhance compression and fusion yields for future ICF applications.
- 1 December 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (12)
Open AccessFirst demonstration of improved yield with reduced adiabat in inertial confinement fusion implosions on the National Ignition Facility
Laser-driven, indirect-drive inertial confinement fusion (ICF) experiments at the National Ignition Facility (NIF) recently achieved a target gain greater than one, where fusion energy output exceeds input laser energy [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)]. Despite this milestone, gain levels remain insufficient for practical applications such as inertial fusion energy, making performance improvement critical. One promising approach is increasing fuel compression by lowering the implosion adiabat. To explore reduced adiabat, experiments were conducted modifying the laser pulse shape and shock timing of an existing 1.9-MJ-drive implosion design performing near the ignition cliff [Abu-Shawareb et al., Phys. Rev. Lett. 129, 075001 (2022)]. These experiments demonstrated increased compression and fusion yield in ICF implosions at the NIF by using a lower fuel adiabat, and increased compression with a reduced adiabat in high-density carbon ablators. The updated design achieved up to 80% higher fusion yield and 14% greater fuel compression compared to the previous best-performing 1.9-MJ experiment, with repeatable performance, and is the only implosion design to achieve a target gain exceeding one with < 2.04 MJ laser energy. Notably, this work was made possible because of recent advances in target quality and pulse shape control allowing experimental access to the ignition regime, and thereby increased sensitivity to adiabat. This work addresses a long-standing question in ICF research and lays the foundation for higher target gains through optimized implosion strategies. It underscores the potential of reduced adiabat designs to enhance compression and fusion yields for future ICF applications.
- 23 October 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 112 (4) , 045214
Effect on compression of lowering the design adiabat in the SQ-n campaign
A set of experiments in the SQ-n campaign attempts to increase the compression in layered implosions by reducing the design adiabat from 3.0 down to ∼2.6. The experiments utilize nanocrystalline high density carbon ablators driven by a ramped laser pulse drive. Contrary to expectations, the lower design adiabat layered implosion reaches the same level of compression, within the measurement uncertainty, as the previous set of SQ-n layered implosions at the higher design adiabat. We examine potential explanations for this result, including incomplete melting or refreezing of the ablator after the first shock passes into the fuel layer, reproducibility, and dopant areal density. We also discuss additional potential paths to reaching lower adiabat including increased dopant areal density, ramped dopant profiles, and increased initial capsule size which are also based on experimental campaign results from the National Ignition Facility.
- 23 October 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 112 (4) , 045214
Effect on compression of lowering the design adiabat in the SQ-n campaign
A set of experiments in the SQ-n campaign attempts to increase the compression in layered implosions by reducing the design adiabat from 3.0 down to ∼2.6. The experiments utilize nanocrystalline high density carbon ablators driven by a ramped laser pulse drive. Contrary to expectations, the lower design adiabat layered implosion reaches the same level of compression, within the measurement uncertainty, as the previous set of SQ-n layered implosions at the higher design adiabat. We examine potential explanations for this result, including incomplete melting or refreezing of the ablator after the first shock passes into the fuel layer, reproducibility, and dopant areal density. We also discuss additional potential paths to reaching lower adiabat including increased dopant areal density, ramped dopant profiles, and increased initial capsule size which are also based on experimental campaign results from the National Ignition Facility.
- Open Access
- 8 October 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 19 (12)
Wafer Scale N‐Doped Diamond (111) with Mainly Nitrogen Spin Bath Limited Nitrogen Vacancy Coherence Times from Heteroepitexial Growth
Diamond (111) is grown heteroepitaxially on 2″ Ir/YSZ/Si (111) wafers (YSZ=yttria‐stabilized zirconia) with a diameter of 50 mm and off‐cuts of up to 6, applying plasma‐enhanced chemical vapor deposition supported by bias‐enhanced nucleation and epitaxial lateral overgrowth. In the final growth step, a nitrogen‐doped layer (N‐Cap) is superimposed. In the N‐Cap, a preferential orientation of nitrogen vacancy (NV) centers along the surface normal is observed, which has a T coherence time of 9.3 μs, which is the highest value ever reported for heteroepitaxial diamond (111). In the meantime, the T dephasing time is 95 ns, which means that the T / T ratio is almost 100, while published ratios for homoepitaxial diamond are in the range 5–20. The total nitrogen concentration as measured by Time‐of‐Flight Secondary Ion Mass Spectrometry is determined to be 7.3 ppm, which, in combination with photoluminescence analysis, yields an NV incorporation efficiency of .
- 8 October 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 19 (12)
Open AccessWafer Scale N‐Doped Diamond (111) with Mainly Nitrogen Spin Bath Limited Nitrogen Vacancy Coherence Times from Heteroepitexial Growth
Diamond (111) is grown heteroepitaxially on 2″ Ir/YSZ/Si (111) wafers (YSZ=yttria‐stabilized zirconia) with a diameter of 50 mm and off‐cuts of up to 6, applying plasma‐enhanced chemical vapor deposition supported by bias‐enhanced nucleation and epitaxial lateral overgrowth. In the final growth step, a nitrogen‐doped layer (N‐Cap) is superimposed. In the N‐Cap, a preferential orientation of nitrogen vacancy (NV) centers along the surface normal is observed, which has a T coherence time of 9.3 μs, which is the highest value ever reported for heteroepitaxial diamond (111). In the meantime, the T dephasing time is 95 ns, which means that the T / T ratio is almost 100, while published ratios for homoepitaxial diamond are in the range 5–20. The total nitrogen concentration as measured by Time‐of‐Flight Secondary Ion Mass Spectrometry is determined to be 7.3 ppm, which, in combination with photoluminescence analysis, yields an NV incorporation efficiency of .
- 15 July 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 135 (3) , 035101
First Demonstration of Improved Fusion Yield with Increased Compression through Reduced Adiabat in Inertial Confinement Fusion Experiments at the National Ignition Facility
Recent advancements in indirect-drive inertial confinement fusion (ICF) experiments at the National Ignition Facility (NIF) have achieved a significant milestone by demonstrating target gains greater than one, yet future applications necessitate much higher target gains. One approach to achieving improved implosion performance is to pursue increased fuel compression via a lowered implosion adiabat. Experiments have been performed testing a reduced adiabat by introducing small changes to the drive laser pulse shape and the resulting shock timing for an existing implosion design at 1.9 MJ laser drive with near-ignition performance (experiment N210808). Experiments using the updated design demonstrate, for the very first time, increased compression and fusion yield in ICF implosions on the NIF by using a lower fuel adiabat, and increased compression with a reduced adiabat in high-density carbon ablators. Compared to the previously best-performing experiment with a laser energy of 1.9 MJ, these experiments exhibit increases of up to 80% and 14% in nuclear fusion yield and fuel compression, respectively, and with repeatable performance. Further, it is the only implosion design to have achieved a target gain exceeding one with a laser energy of less than 2 MJ. These findings highlight the efficacy of reduced adiabat designs in achieving higher compression and fusion yields, offering a promising pathway for future ICF applications. This Letter not only addresses a long-standing question in ICF but also paves the way for achieving higher target gains with optimized implosion strategies.
- 15 July 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 135 (3) , 035101
First Demonstration of Improved Fusion Yield with Increased Compression through Reduced Adiabat in Inertial Confinement Fusion Experiments at the National Ignition Facility
Recent advancements in indirect-drive inertial confinement fusion (ICF) experiments at the National Ignition Facility (NIF) have achieved a significant milestone by demonstrating target gains greater than one, yet future applications necessitate much higher target gains. One approach to achieving improved implosion performance is to pursue increased fuel compression via a lowered implosion adiabat. Experiments have been performed testing a reduced adiabat by introducing small changes to the drive laser pulse shape and the resulting shock timing for an existing implosion design at 1.9 MJ laser drive with near-ignition performance (experiment N210808). Experiments using the updated design demonstrate, for the very first time, increased compression and fusion yield in ICF implosions on the NIF by using a lower fuel adiabat, and increased compression with a reduced adiabat in high-density carbon ablators. Compared to the previously best-performing experiment with a laser energy of 1.9 MJ, these experiments exhibit increases of up to 80% and 14% in nuclear fusion yield and fuel compression, respectively, and with repeatable performance. Further, it is the only implosion design to have achieved a target gain exceeding one with a laser energy of less than 2 MJ. These findings highlight the efficacy of reduced adiabat designs in achieving higher compression and fusion yields, offering a promising pathway for future ICF applications. This Letter not only addresses a long-standing question in ICF but also paves the way for achieving higher target gains with optimized implosion strategies.
- Open Access
- 1 October 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (10)
Thermonuclear performance variability near ignition at the National Ignition Facility
We describe our current understanding of the variability and degradation mechanisms observed through a series of five indirectly driven inertial fusion implosions fielded at the National Ignition Facility in the fall of 2021, four of which attempted to reproduce the first experiment to achieve Lawson's criterion for ignition with a thermonuclear yield of 1.35 MJ on August 8, 2021. A large number of absolutely calibrated (imaging, time-resolved, and spectrally resolved) x-ray and neutron diagnostics are fielded on the NIF along multiple lines of sight for each experiment. This allows for a reconstruction of the DT fuel and ablator mix injected into the hotspot around peak burn. We show that nuclear yield variations are well reproduced by numerical modeling when the measured low mode asymmetries and mix mass are included. Furthermore, these observed perturbations during burn are linked to small variations in laser delivery and capsule defects. Stringent specifications are then set to achieve robust ignition with the implosion design studied in this paper.
- 1 October 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (10)
Open AccessThermonuclear performance variability near ignition at the National Ignition Facility
We describe our current understanding of the variability and degradation mechanisms observed through a series of five indirectly driven inertial fusion implosions fielded at the National Ignition Facility in the fall of 2021, four of which attempted to reproduce the first experiment to achieve Lawson's criterion for ignition with a thermonuclear yield of 1.35 MJ on August 8, 2021. A large number of absolutely calibrated (imaging, time-resolved, and spectrally resolved) x-ray and neutron diagnostics are fielded on the NIF along multiple lines of sight for each experiment. This allows for a reconstruction of the DT fuel and ablator mix injected into the hotspot around peak burn. We show that nuclear yield variations are well reproduced by numerical modeling when the measured low mode asymmetries and mix mass are included. Furthermore, these observed perturbations during burn are linked to small variations in laser delivery and capsule defects. Stringent specifications are then set to achieve robust ignition with the implosion design studied in this paper.
- Open Access
- 1 July 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (7)
Design of first experiment to achieve fusion target gain > 1
A decades-long quest to achieve fusion energy target gain and ignition in a controlled laboratory experiment, dating back to 1962, has been realized at the National Ignition Facility (NIF) on December 5, 2022 [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)] where an imploded pellet of deuterium and tritium (DT) fuel generated more fusion energy (3.15 MJ) than laser energy incident on the target (2.05 MJ). In these experiments, laser beams incident on the inside of a cylindrical can (Hohlraum) generate an intense ∼3 × 106 million degree x-ray radiation bath that is used to spherically implode ∼2 mm diameter pellets containing frozen deuterium and tritium. The maximum fusion energy produced in this configuration to date is 3.88 MJ using 2.05 MJ of incident laser energy and 5.2 MJ using 2.2 MJ of incident laser energy, producing a new record target gain of ∼2.4×. This paper describes the physics (target and laser) design of this platform and follow-on experiments that show increased performance. We show robust megajoule fusion energy output using this design as well as explore design modification using radiation hydrodynamic simulations benchmarked against experimental data, which can further improve the performance of this platform.
- 1 July 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (7)
Open AccessDesign of first experiment to achieve fusion target gain > 1
A decades-long quest to achieve fusion energy target gain and ignition in a controlled laboratory experiment, dating back to 1962, has been realized at the National Ignition Facility (NIF) on December 5, 2022 [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)] where an imploded pellet of deuterium and tritium (DT) fuel generated more fusion energy (3.15 MJ) than laser energy incident on the target (2.05 MJ). In these experiments, laser beams incident on the inside of a cylindrical can (Hohlraum) generate an intense ∼3 × 106 million degree x-ray radiation bath that is used to spherically implode ∼2 mm diameter pellets containing frozen deuterium and tritium. The maximum fusion energy produced in this configuration to date is 3.88 MJ using 2.05 MJ of incident laser energy and 5.2 MJ using 2.2 MJ of incident laser energy, producing a new record target gain of ∼2.4×. This paper describes the physics (target and laser) design of this platform and follow-on experiments that show increased performance. We show robust megajoule fusion energy output using this design as well as explore design modification using radiation hydrodynamic simulations benchmarked against experimental data, which can further improve the performance of this platform.