MMMojtaba Mohammadi

Mojtaba Mohammadi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mojtaba Mohammadi has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Stabilization of Ultrafast Domain Wall Motion by Edge‐Anisotropy Engineering in Ferrimagnetic Nanowires

    by Mojtaba Mohammadi, Sina Ranjbar, Yoshinobu Nakatani, Benjamin Lilienthal‐Uhlig, Kenji Tanabe, Hiroyuki Awano

    Achieving stable, ultrafast current‐induced domain wall motion (CIDWM) is essential for practical racetrack memory devices. Here, anisotropy‐engineering at the edges of Pt/GdFe ferrimagnetic nanowires with composition near magnetic compensation is investigated through experimental laser‐annealing (LA) treatments and Landau–Lifshitz–Gilbert (LLG)‐based micromagnetic simulations. CIDWM measurements show that LA enhances DW velocity and stabilizes propagation over a wide current‐density range. The velocity reaches approximately 3200 m s −1 and remains relatively stable at high current densities, indicating a stable high‐speed propagation regime. Kerr microscopy further reveals that LA transforms curved and distorted DW profiles into straighter, more uniform configurations. Simulations varying the local perpendicular magnetic anisotropy (K u ) and annealed‐edge width clarify the underlying mechanism. Moderate edge‐anisotropy reduction suppresses pinning, stabilizes the DW configuration, and enables coherent spin–orbit‐torque‐driven propagation. In contrast, excessive anisotropy reduction or excessively wide annealed regions induce multidomain instability and deteriorate DW motion. The simulated dynamics reproduce the experimentally observed velocity saturation and stable propagation behavior. LA‐defined channels further suggest a scalable multi‐lane architecture in which N laser traces can define up to N+1 DW transport paths within a single wire. These findings establish LA as an effective anisotropy‐engineering technique and provide a quantitative design framework for racetrack memory and reconfigurable spintronic devices.

  • Open Access

    Large Anomalous Nernst Effect in Disordered CoPt Thin Films for Planar Thermoelectric Sensing

    by Mojtaba Mohammadi, Hiroyuki Awano, Kenji Tanabe

    The anomalous Nernst effect ( ANE ), which converts a thermal gradient into a transverse electric field, offers a promising route for planar thermoelectric devices and microscale heat‐flux sensors. In this study, we systematically investigated the compositional dependence of ANE and thermal transport in Co 1 − x Pt x thin films deposited on quartz glass substrates using DC magnetron co‐sputtering. A strong compositional dependence of the transverse thermopower ( S ANE ) was observed, showing a significant tenfold enhancement from 0.33 µV K − 1 to 3.22 µV K − 1 . The corresponding transverse thermoelectric constant ( α xy ) reached 5 A m − 1 K − 1 , closely following an intrinsic‐like scaling behavior with anomalous Hall conductivity ( σ xy ). By tuning the Pt concentration, we achieved a notable ratio in the | α xy |/| σ xy | close to the well‐known k B /e benchmark observed in topological magnets. The ANE sensitivity ( E / J Q ) exhibited a maximum of 0.3 µm A − 1 at x = 50%, accompanied by a reduced thermal conductivity of ≈10 W m − 1 K − 1 . Our results demonstrate that disordered CoPt films can simultaneously achieve low κ and large intrinsic ANE response, highlighting that disordered or partially crystalline structures can sustain strong transverse thermoelectric transport and are promising candidates for high‐sensitivity thermoelectric and heat‐flux sensing applications.

  • Open Access

    Composition‐Tuned Enhancement of the Anomalous Nernst Effect in FeCo–Pt Thin Films on Rigid and Flexible Substrates

    by Mojtaba Mohammadi, Hiroyuki Awano, Kenji Tanabe

    In this study, we systematically investigated the anomalous Nernst effect (ANE) in (Fe 50 Co 50 ) 1‐ x Pt x thin films deposited on rigid quartz and flexible polycarbonate substrates, highlighting significant quantitative improvements compared to conventional ferromagnetic alloys. By carefully tuning the Pt composition, we achieved notable ratios in the anomalous Nernst coefficient ( S ANE ) and transverse thermoelectric constant ( α xy ), yielding a | α xy |/| σ xy | ratio close to the well‐known k B /2e benchmark observed in topological magnets. The S ANE magnitude exhibited a significant fourfold enhancement, increasing from 0.57 µV/K for the Pt‐free sample to around 2.4 µV/K at x = 22.5%. Furthermore, we illustrated how our films achieve ANE sensitivities around 0.19 μm·A −1 , comparable to leading materials. Our results underscore a promising new avenue by demonstrating that even structurally disordered or weakly ordered systems can exhibit significant Berry curvature‐related transport effects traditionally associated with crystalline lattices. This not only highlights the quantitative strength of our approach but also its practical versatility, as these films can be deposited on flexible substrates at room temperature. Our work presents a novel contribution to the field of spin caloritronics, exploring underinvestigated territory in structurally disordered magnetic materials, and paving the way for future flexible ANE devices.

  • Efficient spin–orbit torque driven magnetization switching of GdFe using phosphorus-implanted platinum layers

    by Kazuki Shintaku, Arun Jacob Mathew, Akihisa Iwamoto, Mojtaba Mohammadi, Hiroyuki Awano, Hironori Asada, Yasuhiro Fukuma

    The capability of the spin–orbit torque (SOT) generated via phenomena such as the spin Hall effect in heavy metals, in switching the magnetization of an adjacent magnetic material, has been studied extensively over the last decade. The efficiency of SOT generation is commonly quantified in terms of the spin Hall angle (SHA). In this work, we demonstrate experimentally that implanting platinum (Pt) with phosphorus (P), resulting in Pt (P) with different implantation doses, increases SHA by a factor of 7, from 0.06 (dose of zero) to 0.43 (dose of 10 × 1016 ions/cm2). The enhanced SHA, along with factors such as perpendicular magnetic anisotropy and resistivity, leads to reduction of the critical current density for switching the perpendicular magnetization of ferrimagnetic rare earth-transition metal alloy Gd26Fe74, by a factor of nearly 27, from 4.0 × 1011 A/m2 (zero) to 1.5 × 1010 A/m2 (10 × 1016 ions/cm2). Furthermore, the switching current density at zero thermal fluctuations and thermal stability factor were evaluated and found to be 2.0 × 1010 A/m2 and 61.4 (10 × 1016 ions/cm2), with the latter being sufficiently above the required threshold for commercial memory applications. Our results suggest that Pt (P) could be a strong candidate in realizing efficient SOT driven magnetization switching, leading to the development of improved memory and logic devices in the future.


  • Open Access

    Enhancement in the Performance of Spin–Orbit Torque Driven Programmable Logic Using Nitrogen Doped Pt

    by Arun Jacob Mathew, Akihisa Iwamoto, Mojtaba Mohammadi, Hiroyuki Awano, Hironori Asada, Yasuhiro Fukuma


  • Modulation of nonlinearity and asymmetry in a spin–orbit torque driven artificial synapse

    by Arun Jacob Mathew, John Rex Mohan, Chisato Yamanaka, Kazuki Shintaku, Mojtaba Mohammadi, Hiroyuki Awano, Hironori Asada, Yasuhiro Fukuma

    Unconventional computing schemes inspired by biological neural networks are being explored with ever growing interest to eventually replace traditional von Neumann architecture-based computation. Realization of such schemes necessitates the development of device analogs to biological neurons and synapses. Particularly, in spin-based artificial synapses, the spin–orbit torque (SOT) can be utilized for changing between multiple resistance states of the synapse. In this work, we demonstrate synaptic behavior, namely long-term potentiation and long-term depression in a ferrimagnet (GdFe) via SOT generated using a heavy metal (Pt). The dependence of the synapse-like output on the input parameters is extensively investigated. Synaptic arrays based on experimental results are simulated and used to perform the classification of a handwritten digit dataset. Correlating the classification accuracy with the experimentally observed synaptic behavior, the performance of the synapse is found to depend on the critical switching currents. Understanding the correlation between the input parameters and synaptic performance could accelerate the development of artificial spintronic synapses possessing high operation speed, nonvolatility and plasticity, thereby enabling efficient compute in-memory systems in the near future.


  • Exploring fast domain wall motion and DMI realization in compensated ferrimagnetic nanowires

    by Mojtaba Mohammadi, Sina Ranjbar, Pham Van Thach, Satoshi Sumi, Kenji Tanabe, Hiroyuki Awano

    Recent advancements in spintronics have spurred interest in current-induced domain wall motion as a promising avenue for next-generation memory technologies. While previous research has predominantly focused on thin ferromagnetic films, recent attention has shifted towards ferrimagnetic materials due to their potential for magnetization compensation and efficient domain wall (DW) motion. In this study, we investigated the dynamics of DWs in compensated ferrimagnetic Pt/Gd x Fe1−x nanowires through experimental characterization and analysis. Our results reveal fast DW motion around the magnetic compensation point, indicating the influence of spin–orbit torque induced by current flow. We systematically explore the Dzyaloshinskii–Moriya interaction (DMI) field across different compositions of GdFe, observing elevated DMI field values near the compensation compositions. Additionally, we examine the impact of wire width and pulse duration on DW velocity, demonstrating higher velocities in narrower wires and shorter pulse durations. In the 1 μm wire, a DW velocity of around 3200 m s−1 was achieved by applying a 3 ns short pulse current. Our findings elucidate the intricate interplay between film composition, magnetic properties, wire width, pulse duration, and DW dynamics, providing valuable insights for the design and optimization of ferrimagnetic materials for future magnetic memory technologies.


  • Open Access

    Realization of logic operations via spin–orbit torque driven perpendicular magnetization switching in a heavy metal/ferrimagnet bilayer

    by Arun Jacob Mathew, Yufei Gao, Junwen Wang, Mojtaba Mohammadi, Hiroyuki Awano, Masaaki Takezawa, Hironori Asada, Yasuhiro Fukuma

    Programmable and non-volatile spin-based logic devices have attracted significant interest for use in logic circuits. Realization of logic operations via spin–orbit torque (SOT) driven magnetization switching could be a crucial step in the direction of building logic-in-memory architectures. In this work, we demonstrate experimentally, the realization of four logic operations in a heavy metal/ferrimagnet bilayer structure via SOT switching. We also propose a general scheme for choosing input parameters to achieve programmable logic operations. The bulk and tunable perpendicular magnetic anisotropy and relatively lower saturation magnetization in ferrimagnets are found to make them more energy efficient in performing logic operations, as compared to conventional ferromagnets. Thus, ferrimagnets are promising candidates for use in logic-in-memory architectures, leading to the realization of user-friendly spin logic devices in the future.


  • Open Access

    Drastic enhancement of stable and fast domain wall motion in GdFe nanowires through laser-annealing treatment at wire edges

    by Mojtaba Mohammadi, Yamato Miyose, Satoshi Sumi, Kenji Tanabe, Hiroyuki Awano

    One of the key challenges in racetrack memory (RM) technology is achieving stable and high velocities for domain walls (DWs) while maintaining low power consumption. In our study, we propose a novel laser-annealing (LA) process to modify wire edges for a smoother DW movement along the nanowire. In this regard, a film stack of Pt (5 nm)/Gd26Fe74(20 nm)/SiN(10 nm) was deposited by magnetron sputtering. The DW velocity in the wire was measured by applying single voltage pulses and then observing the DW motion using a Kerr microscope. The current-induced domain walls motion measurements have shown that the LA process significantly enhances the velocity of DW motion. The LA of both edges of the nanowire results in a threefold increase in DW velocity compared to non-LA conditions. Further experiments illustrated that the DW velocity remains stable for the laser-annealed condition across a wide range of applied currents, spanning from 3 × 1011 to 7 × 1011 A/m2. Additionally, our investigation into the magnetic characteristics of laser-annealed nanowire regions exhibited a notable reduction of Hc at the laser-annealed edges. This decrease in Hc indicates greater ease in manipulating the material’s magnetization, which is essential for efficient DW motion. Furthermore, we explored the influence of LA on the Dzyaloshinskii–Moriya Interaction (DMI) field. The DMI finding underscores the strong correlation between DMI fields and DW speed. This achievement, i.e. the stability and consistency of the domain’s velocity (as the components of an RM) in a wide range of applied current, is significant progress in the field of operation and industrialization of RM.


  • Open Access

    Boosting domain wall velocity and stability in ferrimagnetic GdFe nanowires by applying laser-annealing process

    by Mojtaba Mohammadi, Satoshi Sumi, Kenji Tanabe, Hiroyuki Awano

    This study highlights the significant achievement of enhancing domain wall (DW) velocity through the laser-annealing (LA) process in GdxFe100−x films, with a specific focus on the Gd26Fe74 composition. By investigating the current-induced DW motion, it was observed that the LA process on the edges and middle of the nanowires resulted in a remarkable improvement in DW velocity from around 600 m/s for non-laser-annealed to 1800 m/s for laser-annealed conditions. Furthermore, we conducted additional experiments to explore the stability and dynamics of a system involving DWs in a single wire. The experimental results revealed a stable and uniform movement of the DWs, as evidenced by a velocity of approximately 1800 m/s, even after the application of 20 pulses with a short pulse width of 1 ns. The resulting stability of the DW motion across a wide range of applied currents demonstrates the practical significance of the LA in achieving high-performance racetrack memories. Our findings suggest that the LA process has a similar effect on both the middle and edge treatments of the wire. This indicates that structural defects on the wire's edges are not the main cause of the observed low velocity or curvy shape of DWs. One possible mechanism for this effect is the reduction of the Ku value through the LA process. This study establishes a ground-breaking advancement by showcasing the effectiveness of the LA in enhancing DW motion velocity in GdFe ferrimagnetic thin films, thereby opening avenues for future research and industrial applications in this field.