Muhammet Nasuh Arık
Muhammet Nasuh Arık has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Ali Altuntepe
Sivas Bilim ve Teknoloji Universitesi
2 shared publications - Cennet Yildirim
Turkish Energy, Nuclear and Mining Research Corporation (TENMAK), Boron Research Institute (BOREN), Cankaya 06510, Ankara, Türkiye
2 shared publications - Hakan Ates
Gazi Üniversitesi
2 shared publications - Recep Zan
Niğde Ömer Halisdemir Üniversitesi
2 shared publications - Behçet Gülenç
Gazi Üniversitesi
1 shared publication - Bülend Ortaç
National Nanotechnology Research Center (UNAM) and the Institute of Materials Science Nanotechnology, Bilkent University, Ankara, Trkiye
1 shared publication
Latest Publications
- Open Access
- 10 October 2026
- Published by Elsevier in SSRN Electronic Journal
Femtosecond Laser Ablation of Engineered Y₂O₃:Yb³⁺/Er³⁺ Ceramic Targets for Ultrasmall Red-Emitting Upconversion Nanoparticles with Intrinsic Photothermal Properties
This research introduces a green synthesis method for producing mono-color red-emitting upconversion nanoparticles (UCNPs) with inherent photothermal properties. Using a single-step, femtosecond laser ablation process, we achieve precise control over synthesis, reducing hazardous chemical usage and enhancing target reusability, thus making the method environmentally friendly. We initially optimized a ceramic engineering process for producing highly doped Y2O3:Yb3+/Er3+ ceramic targets, essential for maximizing laser ablation efficiency and limiting target degradation. This involved ball milling to achieve nanoscale homogeneity and comprehensive sintering optimization, followed by detailed characterization of the targets' crystal structure, microstructure, and photoluminescence (PL) and photothermal (PT) properties. The targets demonstrated impressive red upconversion luminescence and photothermal activity, making them suitable for laser ablation. We thoroughly studied the color and photothermal energy-conversion dynamics of both the targets and the synthesized photothermal UCNPs (PT-UCNPs). Femtosecond laser ablation was selected to minimize laser-induced damage, resulting in well-dispersed sub-10 nm UCNPs with excellent photoluminescence and photothermal properties. The synthesized PT-UCNPs exhibit strong, single-color red emission at 660 nm, falling within the biological window, and possess inherent photothermal activity without needing additional photothermal agents. These findings underscore the potential of these dual-functional PT-UCNPs as fundamental components in broader strategies for advanced biomedical applications.
- 10 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFemtosecond Laser Ablation of Engineered Y₂O₃:Yb³⁺/Er³⁺ Ceramic Targets for Ultrasmall Red-Emitting Upconversion Nanoparticles with Intrinsic Photothermal Properties
This research introduces a green synthesis method for producing mono-color red-emitting upconversion nanoparticles (UCNPs) with inherent photothermal properties. Using a single-step, femtosecond laser ablation process, we achieve precise control over synthesis, reducing hazardous chemical usage and enhancing target reusability, thus making the method environmentally friendly. We initially optimized a ceramic engineering process for producing highly doped Y2O3:Yb3+/Er3+ ceramic targets, essential for maximizing laser ablation efficiency and limiting target degradation. This involved ball milling to achieve nanoscale homogeneity and comprehensive sintering optimization, followed by detailed characterization of the targets' crystal structure, microstructure, and photoluminescence (PL) and photothermal (PT) properties. The targets demonstrated impressive red upconversion luminescence and photothermal activity, making them suitable for laser ablation. We thoroughly studied the color and photothermal energy-conversion dynamics of both the targets and the synthesized photothermal UCNPs (PT-UCNPs). Femtosecond laser ablation was selected to minimize laser-induced damage, resulting in well-dispersed sub-10 nm UCNPs with excellent photoluminescence and photothermal properties. The synthesized PT-UCNPs exhibit strong, single-color red emission at 660 nm, falling within the biological window, and possess inherent photothermal activity without needing additional photothermal agents. These findings underscore the potential of these dual-functional PT-UCNPs as fundamental components in broader strategies for advanced biomedical applications.
- Open Access
- 31 March 2026
- Published by Bor Dergisi in Journal of Boron
- Vol. 11 (1) , 13-21
Optimization for growth condition of ultrathin hexagonal boron nitride on dielectric substrates via LPCVD method
In this study, the direct and transfer-free synthesis of ultrathin hexagonal Boron Nitride (h BN) films on non-catalytic quartz substrates was investigated using the Low-Pressure Chemical Vapor Deposition (LPCVD) method. The effects of key growth parameters, including growth duration (15-90 min), precursor amount (50-200 mg), and precursor decomposition temperature (80-100°C), were systematically investigated to achieve high quality film growth. Spectroscopic characterization confirmed the formation of the h-BN phase, with Raman spectra exhibiting the characteristic E2g vibrational mode and FT-IR analysis showing the distinct B-N stretching and B-N-B bending bonds at 1370 and 800 cm-1, respectively. UV-Vis spectroscopy revealed high optical transparency (>95%) in the visible region, and Tauc plot analysis yielded an optical bandgap of 5.68 eV. This widening of the bandgap relative to bulk h-BN (~5.2 eV) provides quantitative evidence of the few-layer nature of the films due to the quantum confinement effect. The results demonstrate that the optimized LPCVD process allows for the precise control of h-BN synthesis on dielectric surfaces, eliminating the need for metal catalysts and complex transfer processes for optoelectronic applications.
- 31 March 2026
- Published by Bor Dergisi in Journal of Boron
- Vol. 11 (1) , 13-21
Open AccessOptimization for growth condition of ultrathin hexagonal boron nitride on dielectric substrates via LPCVD method
In this study, the direct and transfer-free synthesis of ultrathin hexagonal Boron Nitride (h BN) films on non-catalytic quartz substrates was investigated using the Low-Pressure Chemical Vapor Deposition (LPCVD) method. The effects of key growth parameters, including growth duration (15-90 min), precursor amount (50-200 mg), and precursor decomposition temperature (80-100°C), were systematically investigated to achieve high quality film growth. Spectroscopic characterization confirmed the formation of the h-BN phase, with Raman spectra exhibiting the characteristic E2g vibrational mode and FT-IR analysis showing the distinct B-N stretching and B-N-B bending bonds at 1370 and 800 cm-1, respectively. UV-Vis spectroscopy revealed high optical transparency (>95%) in the visible region, and Tauc plot analysis yielded an optical bandgap of 5.68 eV. This widening of the bandgap relative to bulk h-BN (~5.2 eV) provides quantitative evidence of the few-layer nature of the films due to the quantum confinement effect. The results demonstrate that the optimized LPCVD process allows for the precise control of h-BN synthesis on dielectric surfaces, eliminating the need for metal catalysts and complex transfer processes for optoelectronic applications.
- Open Access
Optimization for growth condition of ultrathin hexagonal boron nitride on dielectric substrates via LPCVD
Hexagonal Boron Nitride (h-BN) is a highly intriguing candidate for heterostructure optoelectronic applications, such as Deep Ultraviolet photodetectors, UV sensing and communication systems and solar cells. This is primarily due to its unique properties, including a layer dependent wide energy bandgap, superior mechanical strength, high thermal conductivity, high band-edge absorption coefficient, and exceptional transparency in the UV region. The widely adopted synthesis method for h-BN thin films is Chemical Vapor Deposition (CVD) Method, which often utilizes catalytic substrates like copper (Cu) and Nickel (Ni). However, integrating the synthesized h-BN into device applications requires a subsequent transfer process to the target substrate. This transfer step introduces significant material damage, such as folding, cracking and polymer residues, which ultimately degrade the optoelectronic properties of the material and compromise device performance. To overcome this major challenge, there is a strong need to synthesize high-quality h-BN films directly onto dielectric substrates such as silicon (Si), SiO2, quartz, sapphire or AlN without the need for transfer. The primary difficulty in direct synthesis lies in achieving homogenous, high crystallinity films with controllable thickness due to the absence of a catalytic effect. In this work, we investigated the optimization of growth parameters for the direct synthesis of ultrathin h-BN films on non-catalytic quartz substrates, which are highly transparent in the UV region, using the Low-pressure Chemical Vapor Deposition (LPCVD) method. The optimal synthesis conditions were determined to be 1050oC for 60 min, achieved by the decomposition of 150 mg Ammonia Borane (AB) precursor at 80oC. This optimization is crucial for advancing large-scale, high-performance h-BN based DUV photodetector fabrication.
Open AccessOptimization for growth condition of ultrathin hexagonal boron nitride on dielectric substrates via LPCVD
Hexagonal Boron Nitride (h-BN) is a highly intriguing candidate for heterostructure optoelectronic applications, such as Deep Ultraviolet photodetectors, UV sensing and communication systems and solar cells. This is primarily due to its unique properties, including a layer dependent wide energy bandgap, superior mechanical strength, high thermal conductivity, high band-edge absorption coefficient, and exceptional transparency in the UV region. The widely adopted synthesis method for h-BN thin films is Chemical Vapor Deposition (CVD) Method, which often utilizes catalytic substrates like copper (Cu) and Nickel (Ni). However, integrating the synthesized h-BN into device applications requires a subsequent transfer process to the target substrate. This transfer step introduces significant material damage, such as folding, cracking and polymer residues, which ultimately degrade the optoelectronic properties of the material and compromise device performance. To overcome this major challenge, there is a strong need to synthesize high-quality h-BN films directly onto dielectric substrates such as silicon (Si), SiO2, quartz, sapphire or AlN without the need for transfer. The primary difficulty in direct synthesis lies in achieving homogenous, high crystallinity films with controllable thickness due to the absence of a catalytic effect. In this work, we investigated the optimization of growth parameters for the direct synthesis of ultrathin h-BN films on non-catalytic quartz substrates, which are highly transparent in the UV region, using the Low-pressure Chemical Vapor Deposition (LPCVD) method. The optimal synthesis conditions were determined to be 1050oC for 60 min, achieved by the decomposition of 150 mg Ammonia Borane (AB) precursor at 80oC. This optimization is crucial for advancing large-scale, high-performance h-BN based DUV photodetector fabrication.
- Open Access
- 14 October 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (10) , 564
Scalable Production of Boron Nitride-Coated Carbon Fiber Fabrics for Improved Oxidation Resistance
This study aimed to develop an industrially scalable coating route for enhancing the oxidation resistance of carbon fiber fabrics, a critical requirement for next-generation aerospace and high-temperature composite structures. To achieve this goal, synthesis of hexagonal boron nitride (h-BN) layers was achieved via a single wet step in which the fabric was impregnated with an ammonia–borane/THF solution and subsequently nitrided for 2 h at 1000–1500 °C in flowing nitrogen. Thermogravimetric analysis coupled with X-ray diffraction revealed that amorphous BN formed below ≈1200 °C and crystallized completely into (002)-textured h-BN (with lattice parameters a ≈ 2.50 Å and c ≈ 6.7 Å) once the dwell temperature reached ≥1300 °C. Complementary XPS, FTIR and Raman spectroscopy confirmed a near-stoichiometric B:N ≈ 1:1 composition and the elimination of O–H/N–H residues as crystallinity improved. Low-magnification SEM (100×) confirmed the uniform and large-area coverage of the BN layer on the carbon fiber tows, while high-magnification SEM revealed a progressive densification of the coating from discrete nanospheres to a continuous nanosheet barrier on the fibers. Oxidation tests in flowing air shifted the onset of mass loss from 685 °C for uncoated fibers to 828 °C for the coating produced at 1400 °C; concurrently, the peak oxidation rate moved ≈200 °C higher and declined by ~40%. Treatment at 1500 °C conferred no additional benefit, indicating that 1400 °C provides the optimal balance between full crystallinity and limited grain coarsening. The resulting dense h-BN film, aided by an in situ self-healing B2O3 glaze above ~800 °C, delayed carbon fiber oxidation by ≈140 °C. Overall, the process offers a cost-effective, large-area alternative to vapor-phase deposition techniques, positioning BN-coated carbon fiber fabrics for robust service in extreme oxidative environments.
- 14 October 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (10) , 564
Open AccessScalable Production of Boron Nitride-Coated Carbon Fiber Fabrics for Improved Oxidation Resistance
This study aimed to develop an industrially scalable coating route for enhancing the oxidation resistance of carbon fiber fabrics, a critical requirement for next-generation aerospace and high-temperature composite structures. To achieve this goal, synthesis of hexagonal boron nitride (h-BN) layers was achieved via a single wet step in which the fabric was impregnated with an ammonia–borane/THF solution and subsequently nitrided for 2 h at 1000–1500 °C in flowing nitrogen. Thermogravimetric analysis coupled with X-ray diffraction revealed that amorphous BN formed below ≈1200 °C and crystallized completely into (002)-textured h-BN (with lattice parameters a ≈ 2.50 Å and c ≈ 6.7 Å) once the dwell temperature reached ≥1300 °C. Complementary XPS, FTIR and Raman spectroscopy confirmed a near-stoichiometric B:N ≈ 1:1 composition and the elimination of O–H/N–H residues as crystallinity improved. Low-magnification SEM (100×) confirmed the uniform and large-area coverage of the BN layer on the carbon fiber tows, while high-magnification SEM revealed a progressive densification of the coating from discrete nanospheres to a continuous nanosheet barrier on the fibers. Oxidation tests in flowing air shifted the onset of mass loss from 685 °C for uncoated fibers to 828 °C for the coating produced at 1400 °C; concurrently, the peak oxidation rate moved ≈200 °C higher and declined by ~40%. Treatment at 1500 °C conferred no additional benefit, indicating that 1400 °C provides the optimal balance between full crystallinity and limited grain coarsening. The resulting dense h-BN film, aided by an in situ self-healing B2O3 glaze above ~800 °C, delayed carbon fiber oxidation by ≈140 °C. Overall, the process offers a cost-effective, large-area alternative to vapor-phase deposition techniques, positioning BN-coated carbon fiber fabrics for robust service in extreme oxidative environments.
- 10 November 2023
- Published by Elsevier in Solid State Sciences
- Vol. 146
Improving the oxidation resistance of carbon fibers via B4C coating by modified boron oxide chemical vapor deposition
- 10 November 2023
- Published by Elsevier in Solid State Sciences
- Vol. 146
Improving the oxidation resistance of carbon fibers via B4C coating by modified boron oxide chemical vapor deposition