Vitalii Salnikov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vitalii Salnikov has a total of 103 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Omelyanchik
Department of Chemistry and Industrial Chemistry & INSTM RU nM2‐Lab University of Genoa Genoa Italy
7 shared publications - Valeria Rodionova
REC Smart Materials and Biomedical Applications, Immanuel Kant Baltic Federal University, Kaliningrad 236041, Russia
7 shared publications V. Rodionova
5 shared publicationsValeria Rodionova
REC Smart Materials and Biomedical Applications Immanuel Kant Baltic Federal University Kaliningrad Russia
4 shared publicationsA. Omelyanchik
REC Smart Materials and Biomedical Applications, Immanuel Kant Baltic Federal University, Kaliningrad, Russia
3 shared publicationsP. Vorontsov
REC Smart Materials and Biomedical Applications, Immanuel Kant Baltic Federal University, Kaliningrad, Russia
3 shared publications
Latest Publications
- 26 September 2026
- Published by Wiley in Polymer Engineering & Science
Effect of Nanoparticles Coating and Solvent Selection on the Structure of PVDF/CoFe 2 O 4 Composites Fabricated by Direct Ink Writing
This study investigates how solvent selection and polyethylene glycol (PEG) coating of cobalt ferrite (CFO) nanoparticles affect the morphology and phase composition of polyvinylidene fluoride (PVDF)/CFO composite films fabricated by direct ink writing (DIW). A custom DIW printer was developed to enable controlled extrusion of PVDF‐based inks containing bare or PEG‐coated CFO nanoparticles and prepared with either N,N‐dimethylformamide (DMF) or an acetone/dimethyl sulfoxide (Ac + DMSO) solvent system. Bare CFO increased spherulite size and reduced the electroactive PVDF phase content in both solvent systems. In contrast, PEG‐coated CFO combined with Ac + DMSO improved nanoparticle dispersion and increased the electroactive phase fraction in the composite from 42% to 50%. These results show that solvent selection and nanoparticle surface modification jointly govern the structure of DIW‐printed PVDF/CFO composites and identify Ac + DMSO with PEG‐coated CFO as the most promising formulation for magnetoelectric applications.
- 26 September 2026
- Published by Wiley in Polymer Engineering & Science
Effect of Nanoparticles Coating and Solvent Selection on the Structure of PVDF/CoFe 2 O 4 Composites Fabricated by Direct Ink Writing
This study investigates how solvent selection and polyethylene glycol (PEG) coating of cobalt ferrite (CFO) nanoparticles affect the morphology and phase composition of polyvinylidene fluoride (PVDF)/CFO composite films fabricated by direct ink writing (DIW). A custom DIW printer was developed to enable controlled extrusion of PVDF‐based inks containing bare or PEG‐coated CFO nanoparticles and prepared with either N,N‐dimethylformamide (DMF) or an acetone/dimethyl sulfoxide (Ac + DMSO) solvent system. Bare CFO increased spherulite size and reduced the electroactive PVDF phase content in both solvent systems. In contrast, PEG‐coated CFO combined with Ac + DMSO improved nanoparticle dispersion and increased the electroactive phase fraction in the composite from 42% to 50%. These results show that solvent selection and nanoparticle surface modification jointly govern the structure of DIW‐printed PVDF/CFO composites and identify Ac + DMSO with PEG‐coated CFO as the most promising formulation for magnetoelectric applications.
- Open Access
- 11 March 2026
- Published by Elsevier in SSRN Electronic Journal
From ligand to lineage: How nanoparticle coatings control magnetoelectric stimulation of mesenchymal stem cells in PVDF films?
This study systematically investigates how ligands on CoFe2O4 nanoparticles controls magnetoelectric (ME) performance of poly(vinylene fluoride) (PVDF) based multiferroic composites and modulate the behavior of mesenchymal stem cells (MSCs) cultured on these surfaces. Particles bearing different organic coatings (polyethylene glycol, oleylamine, oleic acid, citric acid, and uncoated) were incorporated in a PVDF matrix and characterized by nanoparticle dispersion, interfacial coupling, bulk and local ME response, and magnetically mediated effects on adherent cells. Bulk ME coefficients ranged from 10 to 38 mV·cm⁻¹·Oe⁻¹ for oleic acid and oleylamine coated particles, respectively, a variation attributable to differences in dispersion and polymer–filler coupling. Localized surface measurements revealed signals up to 6000 mV·cm⁻¹·Oe⁻¹ in oleic acid films, consistent with nanoparticle aggregation and surface-localized piezoactive spherulites. Both oleylamine- and oleic acid–containing composites induced MSCs condensation under ME stimulation but only composite with oleylamine enhanced density of adherent cells. These findings delineate coating-dependent mechanisms for tuning ME outputs and provide concrete design criteria for flexible biocompatible ME scaffolds.
- 11 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFrom ligand to lineage: How nanoparticle coatings control magnetoelectric stimulation of mesenchymal stem cells in PVDF films?
This study systematically investigates how ligands on CoFe2O4 nanoparticles controls magnetoelectric (ME) performance of poly(vinylene fluoride) (PVDF) based multiferroic composites and modulate the behavior of mesenchymal stem cells (MSCs) cultured on these surfaces. Particles bearing different organic coatings (polyethylene glycol, oleylamine, oleic acid, citric acid, and uncoated) were incorporated in a PVDF matrix and characterized by nanoparticle dispersion, interfacial coupling, bulk and local ME response, and magnetically mediated effects on adherent cells. Bulk ME coefficients ranged from 10 to 38 mV·cm⁻¹·Oe⁻¹ for oleic acid and oleylamine coated particles, respectively, a variation attributable to differences in dispersion and polymer–filler coupling. Localized surface measurements revealed signals up to 6000 mV·cm⁻¹·Oe⁻¹ in oleic acid films, consistent with nanoparticle aggregation and surface-localized piezoactive spherulites. Both oleylamine- and oleic acid–containing composites induced MSCs condensation under ME stimulation but only composite with oleylamine enhanced density of adherent cells. These findings delineate coating-dependent mechanisms for tuning ME outputs and provide concrete design criteria for flexible biocompatible ME scaffolds.
- 27 February 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (3)
Reaction Time Effect on Magnetic Properties of CoFe 2 O 4 Nanoparticles Through Surfactant‐Assisted Hydrothermal Synthesis
CoFe 2 O 4 nanoparticles were synthesized by surfactant‐assisted hydrothermal treatment for 8–12 h to study the role of reaction time on their structural and magnetic properties. XRD revealed increased from ∼14 to 20 nm coherent domains with increasing synthesis time, while the particle sizes determined with TEM were essentially the same (∼20 nm). Mössbauer spectroscopy showed a decrease in Fe 3+ ions at incomplete fivefold octahedral sites and a corresponding increase at fully coordinated sixfold sites, indicating recrystallization of structurally disordered shells and amorphous‐like ultrasmall particles forming near‐surface region. FORC analysis confirmed that the magnetically soft fraction associated with these disordered regions becomes progressively harder and couples to the magnetically hard phase via exchange interactions.
- 27 February 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (3)
Reaction Time Effect on Magnetic Properties of CoFe 2 O 4 Nanoparticles Through Surfactant‐Assisted Hydrothermal Synthesis
CoFe 2 O 4 nanoparticles were synthesized by surfactant‐assisted hydrothermal treatment for 8–12 h to study the role of reaction time on their structural and magnetic properties. XRD revealed increased from ∼14 to 20 nm coherent domains with increasing synthesis time, while the particle sizes determined with TEM were essentially the same (∼20 nm). Mössbauer spectroscopy showed a decrease in Fe 3+ ions at incomplete fivefold octahedral sites and a corresponding increase at fully coordinated sixfold sites, indicating recrystallization of structurally disordered shells and amorphous‐like ultrasmall particles forming near‐surface region. FORC analysis confirmed that the magnetically soft fraction associated with these disordered regions becomes progressively harder and couples to the magnetically hard phase via exchange interactions.
- Open Access
- 1 January 2026
- Published by Walter de Gruyter GmbH in REVIEWS ON ADVANCED MATERIALS SCIENCE
- Vol. 65 (1)
From ligand to lineage: how nanoparticle coatings control magnetoelectric stimulation of mesenchymal stem cells in PVDF films?
This study systematically investigates how ligands on CoFe 2 O 4 nanoparticles control the magnetoelectric (ME) performance of poly(vinylidene fluoride) (PVDF)-based multiferroic composites and modulate the behavior of mesenchymal stem cells (MSCs) cultured on these surfaces. Particles bearing different organic coatings (polyethylene glycol, oleylamine, oleic acid, citric acid, and uncoated) were incorporated into a PVDF matrix and characterized by nanoparticle dispersion, interfacial coupling, bulk and local ME response, and magnetically mediated effects on adherent cells. Bulk ME coefficients ranged from 10 to 38 mV cm −1 Oe −1 for oleic acid- and oleylamine-coated particles, respectively, a variation attributable to differences in dispersion and polymer–filler coupling. Localized surface measurements revealed signals up to 6,000 mV cm −1 Oe −1 in oleic acid-containing films, consistent with nanoparticle aggregation and surface-localized piezoactive spherulites. Both oleylamine- and oleic acid-containing composites induced the formation of densely packed mesenchymal stem cell aggregates, morphologically resembling mesenchymal condensation under ME stimulation, but only the oleylamine-containing composite enhanced the density of adherent cells. These findings delineate coating-dependent mechanisms for tuning ME outputs and provide concrete design criteria for flexible biocompatible ME scaffolds.
- 1 January 2026
- Published by Walter de Gruyter GmbH in REVIEWS ON ADVANCED MATERIALS SCIENCE
- Vol. 65 (1)
Open AccessFrom ligand to lineage: how nanoparticle coatings control magnetoelectric stimulation of mesenchymal stem cells in PVDF films?
This study systematically investigates how ligands on CoFe 2 O 4 nanoparticles control the magnetoelectric (ME) performance of poly(vinylidene fluoride) (PVDF)-based multiferroic composites and modulate the behavior of mesenchymal stem cells (MSCs) cultured on these surfaces. Particles bearing different organic coatings (polyethylene glycol, oleylamine, oleic acid, citric acid, and uncoated) were incorporated into a PVDF matrix and characterized by nanoparticle dispersion, interfacial coupling, bulk and local ME response, and magnetically mediated effects on adherent cells. Bulk ME coefficients ranged from 10 to 38 mV cm −1 Oe −1 for oleic acid- and oleylamine-coated particles, respectively, a variation attributable to differences in dispersion and polymer–filler coupling. Localized surface measurements revealed signals up to 6,000 mV cm −1 Oe −1 in oleic acid-containing films, consistent with nanoparticle aggregation and surface-localized piezoactive spherulites. Both oleylamine- and oleic acid-containing composites induced the formation of densely packed mesenchymal stem cell aggregates, morphologically resembling mesenchymal condensation under ME stimulation, but only the oleylamine-containing composite enhanced the density of adherent cells. These findings delineate coating-dependent mechanisms for tuning ME outputs and provide concrete design criteria for flexible biocompatible ME scaffolds.
- Open Access
- 24 November 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 349
Enhanced magnetic properties in Mn Co1−Fe2O4 nanoparticles: Unraveling the composition–annealing synergy
- 24 November 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 349
Open AccessEnhanced magnetic properties in Mn Co1−Fe2O4 nanoparticles: Unraveling the composition–annealing synergy
- 26 April 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (5) , 1-13
Effects of PEG surface modification of magnetic nanoparticles on sonocatalysis and photocatalysis in PVDF composites
- 26 April 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (5) , 1-13
Effects of PEG surface modification of magnetic nanoparticles on sonocatalysis and photocatalysis in PVDF composites
- Open Access
Enhancement of Magnetoelectric Effect in Layered Polymer Composites by Zn2+ and Ni2+ Substitution in CoFe2O4 Nanoparticles
Two-layered structures consisting of piezopolymer and magnetic elastomer were investigated as magnetoelectric material. Three types of magnetic elastomer based on cobalt ferrite (CoFe2O4) and Ni- or Zn-substituted CoFe2O4 nanoparticles were used as magnetically sensitive layers. Cobalt ferrite nanoparticles are considered one of the most promising metal-oxide nanomaterials because of their favorable magnetic properties, such as high saturation magnetization and magnetic anisotropy. The substitution of Co2+ in cobalt ferrite with other transition metals allows for additional tailoring of these properties. The modified magnetic behavior of the substituted CoFe2O4 nanoparticles directly influenced the magnetic properties of magnetic elastomers and, consequently, the magnetoelectric response of composite structures. In this case, the resonant frequency of the magnetoelectric effect remained largely independent of the type of magnetic nanoparticles in the magnetic elastomer layer but its magnitude increased upon Zn substitution up to ~107 mV·cm−1·Oe−1. These findings highlight the potential of chemically engineered magnetic properties of CoFe2O4 nanoparticles for manufacturing magnetoelectric composites to expand their applications in energy harvesting and sensors.
Open AccessEnhancement of Magnetoelectric Effect in Layered Polymer Composites by Zn2+ and Ni2+ Substitution in CoFe2O4 Nanoparticles
Two-layered structures consisting of piezopolymer and magnetic elastomer were investigated as magnetoelectric material. Three types of magnetic elastomer based on cobalt ferrite (CoFe2O4) and Ni- or Zn-substituted CoFe2O4 nanoparticles were used as magnetically sensitive layers. Cobalt ferrite nanoparticles are considered one of the most promising metal-oxide nanomaterials because of their favorable magnetic properties, such as high saturation magnetization and magnetic anisotropy. The substitution of Co2+ in cobalt ferrite with other transition metals allows for additional tailoring of these properties. The modified magnetic behavior of the substituted CoFe2O4 nanoparticles directly influenced the magnetic properties of magnetic elastomers and, consequently, the magnetoelectric response of composite structures. In this case, the resonant frequency of the magnetoelectric effect remained largely independent of the type of magnetic nanoparticles in the magnetic elastomer layer but its magnitude increased upon Zn substitution up to ~107 mV·cm−1·Oe−1. These findings highlight the potential of chemically engineered magnetic properties of CoFe2O4 nanoparticles for manufacturing magnetoelectric composites to expand their applications in energy harvesting and sensors.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. PP (00189464) , 1
Magnetic Response of Amorphous Magnetic Microsprings
Amorphous magnetic alloys are now widely used in electronics, electrical engineering, robotics, sensors, etc. They are mainly used in the form of wires, tapes and foils. The technology of manufacturing products from amorphous magnetic alloys is constantly improving and new methods are being implemented. In our work, microspirals (microsprings) made from amorphous microwires are studied. Measurements of hysteresis loops for different types of microspirals have been carried out and the relationship between the hysteresis anisotropy and the parameters of the spirals is discussed. Special attention is given to the study of the magnetic impedance. It is found that the field dependence of the impedance of microspirals is asymmetric, and the sign of the asymmetry is related to the chirality of the spirals. The possibility of using amorphous magnetic microspirals for the development of sensor and microrobotic elements is discussed.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. PP (00189464) , 1
Magnetic Response of Amorphous Magnetic Microsprings
Amorphous magnetic alloys are now widely used in electronics, electrical engineering, robotics, sensors, etc. They are mainly used in the form of wires, tapes and foils. The technology of manufacturing products from amorphous magnetic alloys is constantly improving and new methods are being implemented. In our work, microspirals (microsprings) made from amorphous microwires are studied. Measurements of hysteresis loops for different types of microspirals have been carried out and the relationship between the hysteresis anisotropy and the parameters of the spirals is discussed. Special attention is given to the study of the magnetic impedance. It is found that the field dependence of the impedance of microspirals is asymmetric, and the sign of the asymmetry is related to the chirality of the spirals. The possibility of using amorphous magnetic microspirals for the development of sensor and microrobotic elements is discussed.
- 1 April 2025
- Published by Pleiades Publishing Ltd in Nanobiotechnology Reports
- Vol. 20 (2) , 226-230
Use of Citric and Oleic Acid to Enhance the Magnetoelectric Effect in PVDF-based Composites
Magnetoelectric efficiency of polymer-based multiferroic composites was improved. The changes in the piezoelectric and magnetoelectric properties of PVDF-based composites as a result of coating of CoFe2O4 nanoparticles with oleic and citric acid, which leads to an increase in the voltage coefficient αME of the magnetoelectric effect, are shown. Coating with oleic and citric acid increases the αME value from 0.7 mV/(cm Oe) for a composite with bare nanoparticles to 4.5 and 8.7 mV/(cm Oe), respectively.
- 1 April 2025
- Published by Pleiades Publishing Ltd in Nanobiotechnology Reports
- Vol. 20 (2) , 226-230
Use of Citric and Oleic Acid to Enhance the Magnetoelectric Effect in PVDF-based Composites
Magnetoelectric efficiency of polymer-based multiferroic composites was improved. The changes in the piezoelectric and magnetoelectric properties of PVDF-based composites as a result of coating of CoFe2O4 nanoparticles with oleic and citric acid, which leads to an increase in the voltage coefficient αME of the magnetoelectric effect, are shown. Coating with oleic and citric acid increases the αME value from 0.7 mV/(cm Oe) for a composite with bare nanoparticles to 4.5 and 8.7 mV/(cm Oe), respectively.
- 1 April 2025
- Published by Pleiades Publishing Ltd in Nanobiotechnology Reports
- Vol. 20 (2) , 219-225
Tuning the Magnetoelectric Stimulation Method to Enhance Cell Proliferation in PVDF-based Nanocomposites
A combination of materials such as a PVDF-based composite with 10 wt % CoFe2O4 nanoparticles and a method of ME stimulation of stem cells using a perpendicularly shifting low-frequency (0.3 Hz) magnetic field with a given amplitude are proposed. Optimal stimulation parameters—magnetic field strength, number of stimulations per day and duration—are systematically established to maximize the proliferation of multipotent mesenchymal stem cells up to 30% confirmed by WST-1 analysis.
- 1 April 2025
- Published by Pleiades Publishing Ltd in Nanobiotechnology Reports
- Vol. 20 (2) , 219-225
Tuning the Magnetoelectric Stimulation Method to Enhance Cell Proliferation in PVDF-based Nanocomposites
A combination of materials such as a PVDF-based composite with 10 wt % CoFe2O4 nanoparticles and a method of ME stimulation of stem cells using a perpendicularly shifting low-frequency (0.3 Hz) magnetic field with a given amplitude are proposed. Optimal stimulation parameters—magnetic field strength, number of stimulations per day and duration—are systematically established to maximize the proliferation of multipotent mesenchymal stem cells up to 30% confirmed by WST-1 analysis.