Deniz Duran Kaya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Deniz Duran Kaya has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Ayşegül Körlü
Ege University
3 shared publications - Sema Sert
Graduate School of Natural and Applied Sciences, Ege University, Izmir 35040, Turkey
3 shared publications - Andrej Demšar
Faculty of Natural Sciences and Engineering, University of Ljubljana, Aškerčeva 12, 1000 Ljubljana, Slovenia
1 shared publication - Aydın Ülker
Department of Mechanical Engineering, Faculty of Engineering and Architecture, İzmir Katip Çelebi University, 35620 Izmir, Turkey
1 shared publication - Burak Gultekin
Ege University, Solar Energy Institute
1 shared publication - Ege Ertoğrul
Ege University Graduate School of Natural and Applied Sciences
1 shared publication
Latest Publications
- 15 October 2026
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 36 (3) , 230-245
Production and Characterization of Poly Lactic Acid (Pla) Meltblown Nonwovens For Air Filtration
This paper focuses on reducing the negative impacts of traditional plastics in the production of meltblown filters by using poly lactic acid (PLA) as an environmental friendly biodegradable polymer. In this study the impacts of collector drum speed, die to collector distance (DCD) and die hole diameter on the basis weight, thickness, air permeability, solidity, fiber diameter, water contact angle, and air filtration characteristics of microfibrous PLA nonwovens prepared by meltblowing were investigated. Statistical analyses was conducted by using SPSS software. PLA meltblowns prepared in this study had an average fiber diameter of 2.17 to 3.11 micrometers. The results have shown that, by tailoring the properties of PLA meltblown, filtration performance can be improved while also reducing the environmental impact. This research provides important insights into the production of sustainable meltblown nonwovens by integrating a biodegradable polymer and focusing on the effect of production parameters on material properties.
- 15 October 2026
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 36 (3) , 230-245
Production and Characterization of Poly Lactic Acid (Pla) Meltblown Nonwovens For Air Filtration
This paper focuses on reducing the negative impacts of traditional plastics in the production of meltblown filters by using poly lactic acid (PLA) as an environmental friendly biodegradable polymer. In this study the impacts of collector drum speed, die to collector distance (DCD) and die hole diameter on the basis weight, thickness, air permeability, solidity, fiber diameter, water contact angle, and air filtration characteristics of microfibrous PLA nonwovens prepared by meltblowing were investigated. Statistical analyses was conducted by using SPSS software. PLA meltblowns prepared in this study had an average fiber diameter of 2.17 to 3.11 micrometers. The results have shown that, by tailoring the properties of PLA meltblown, filtration performance can be improved while also reducing the environmental impact. This research provides important insights into the production of sustainable meltblown nonwovens by integrating a biodegradable polymer and focusing on the effect of production parameters on material properties.
- Open Access
Green Carbonization Pathways for EMI Shielding: Evaluating Heating Technologies for Enhanced Textile Waste Valorization
This study investigates innovative pathways for sustainable carbonization by comparing the performance and environmental impacts of microwave and muffle furnace heating technologies in the production of activated carbon from textile waste. The muffle furnace process demonstrated superior material properties, achieving a higher surface area (538.42 m2/g) and exceptional electromagnetic interference (EMI) shielding effectiveness (47.56 dB at 2 GHz). It also exhibited better electrical conductivity, making it highly suitable for EMI shielding applications. Conversely, the microwave method, while yielding a lower surface area (383.92 m2/g) and EMI shielding (38.60 dB at 1 GHz), showed promising electrical conductivity and remarkable advantages in time and energy efficiency. A novel Green Performance Efficiency (GPE) metric was developed to evaluate the sustainability of these processes holistically, integrating performance parameters such as EMI shielding with energy consumption and process duration. The GPE analysis revealed that the microwave method outperformed the muffle furnace in terms of energy and time efficiency, achieving a significantly higher GPE score. However, the muffle furnace method excelled in material performance metrics, highlighting the trade-offs between sustainability and functionality. The findings not only provide a standardized framework for evaluating and optimizing carbonization technologies but also offer actionable insights into balancing efficiency and performance in sustainable activated carbon production. This research paves the way for advanced applications in EMI shielding, energy storage, and sustainable material development, demonstrating the potential of GPE as a benchmark for green technology innovation.
Open AccessGreen Carbonization Pathways for EMI Shielding: Evaluating Heating Technologies for Enhanced Textile Waste Valorization
This study investigates innovative pathways for sustainable carbonization by comparing the performance and environmental impacts of microwave and muffle furnace heating technologies in the production of activated carbon from textile waste. The muffle furnace process demonstrated superior material properties, achieving a higher surface area (538.42 m2/g) and exceptional electromagnetic interference (EMI) shielding effectiveness (47.56 dB at 2 GHz). It also exhibited better electrical conductivity, making it highly suitable for EMI shielding applications. Conversely, the microwave method, while yielding a lower surface area (383.92 m2/g) and EMI shielding (38.60 dB at 1 GHz), showed promising electrical conductivity and remarkable advantages in time and energy efficiency. A novel Green Performance Efficiency (GPE) metric was developed to evaluate the sustainability of these processes holistically, integrating performance parameters such as EMI shielding with energy consumption and process duration. The GPE analysis revealed that the microwave method outperformed the muffle furnace in terms of energy and time efficiency, achieving a significantly higher GPE score. However, the muffle furnace method excelled in material performance metrics, highlighting the trade-offs between sustainability and functionality. The findings not only provide a standardized framework for evaluating and optimizing carbonization technologies but also offer actionable insights into balancing efficiency and performance in sustainable activated carbon production. This research paves the way for advanced applications in EMI shielding, energy storage, and sustainable material development, demonstrating the potential of GPE as a benchmark for green technology innovation.
- Open Access
A Facile Approach to Produce Activated Carbon from Waste Textiles via Self-Purging Microwave Pyrolysis and FeCl3 Activation for Electromagnetic Shielding Applications
This study aims to convert composite textile structures composed of nonwoven and woven fabrics produced from cotton–jute wastes into activated carbon textile structures and investigate the possibilities of using them for electromagnetic shielding applications. To this end, the novel contribution of this study is that it shows that directly carbonized nonwoven textile via self-purging microwave pyrolysis can provide Electromagnetic Interference (EMI) shielding without any processing, including cleaning. Textile carbonization is generally achieved with conventional heating methods, using inert gas and long processing times. In the present study, nonwoven fabric from cotton–jute waste was converted into an activated carbon textile structure in a shorter time via microwaves without inert gas. Due to its polar structure, FeCl3 has been used as a microwave absorbent, providing homogeneous heating in the microwave and acting as an activating agent to serve dual purposes in the carbonization process. The maximum surface area (789.9 m2/g) was obtained for 5% FeCl3. The carbonized composite textile structure has a maximum of 39.4 dB at 1 GHz of EMI shielding effectiveness for 10% FeCl3, which corresponds to an excellent grade for general use and a moderate grade for professional use, exceeding the acceptable range for industrial and commercial applications of 20 dB, according to FTTS-FA-003.
Open AccessA Facile Approach to Produce Activated Carbon from Waste Textiles via Self-Purging Microwave Pyrolysis and FeCl3 Activation for Electromagnetic Shielding Applications
This study aims to convert composite textile structures composed of nonwoven and woven fabrics produced from cotton–jute wastes into activated carbon textile structures and investigate the possibilities of using them for electromagnetic shielding applications. To this end, the novel contribution of this study is that it shows that directly carbonized nonwoven textile via self-purging microwave pyrolysis can provide Electromagnetic Interference (EMI) shielding without any processing, including cleaning. Textile carbonization is generally achieved with conventional heating methods, using inert gas and long processing times. In the present study, nonwoven fabric from cotton–jute waste was converted into an activated carbon textile structure in a shorter time via microwaves without inert gas. Due to its polar structure, FeCl3 has been used as a microwave absorbent, providing homogeneous heating in the microwave and acting as an activating agent to serve dual purposes in the carbonization process. The maximum surface area (789.9 m2/g) was obtained for 5% FeCl3. The carbonized composite textile structure has a maximum of 39.4 dB at 1 GHz of EMI shielding effectiveness for 10% FeCl3, which corresponds to an excellent grade for general use and a moderate grade for professional use, exceeding the acceptable range for industrial and commercial applications of 20 dB, according to FTTS-FA-003.
- Open Access
Development of Activated Carbon Textiles Produced from Jute and Cotton Wastes for Electromagnetic Shielding Applications
Increasing amounts of waste resulting from over-consumption carry substantial risks for human and environmental health, and disposing of this waste requires enormous amounts of energy. As a result, waste-to-wealth and circular economy approaches have gained attention in both academia and the commercial sector in recent years. Accordingly, this study aims to develop electromagnetic shielding materials by converting non-conductive waste textiles into conductive value-added product and porous fabrics by carbonizing the structure itself rather than by adding any conductive particles. To this end, the novel contribution of the present study is that waste textiles were converted into activated carbon in a shorter time and without compromising the integrity of the fibrous network via microwave pyrolysis without inert gas. Sulfuric acid was used as a dehydration and activation agent, suppressing the release of volatile organic substances and eliminating greenhouse gas emissions. This approach also increased product yield and reduced energy consumption and sample shrinkage. The structures of the activated carbon textile showed EMI shielding within 20–30 dB (99.9% attenuation) in the 1–6 GHz frequency range. The maximum SSE/t value of 950.71 dB·cm2·g−1 was obtained with the microwave post-treated activated carbon textile. Micropores were dominant characteristics of these materials, and pore diameters increased with increased acid concentration. The maximum surface area of 383.92 m2/g was obtained with 8% acid. Ultrasound treatment reduced water-energy consumption and cost. Only 5 min of microwave post-treatment increased textile conductivity and thermal stability and contributed positively to electromagnetic shielding.
Open AccessDevelopment of Activated Carbon Textiles Produced from Jute and Cotton Wastes for Electromagnetic Shielding Applications
Increasing amounts of waste resulting from over-consumption carry substantial risks for human and environmental health, and disposing of this waste requires enormous amounts of energy. As a result, waste-to-wealth and circular economy approaches have gained attention in both academia and the commercial sector in recent years. Accordingly, this study aims to develop electromagnetic shielding materials by converting non-conductive waste textiles into conductive value-added product and porous fabrics by carbonizing the structure itself rather than by adding any conductive particles. To this end, the novel contribution of the present study is that waste textiles were converted into activated carbon in a shorter time and without compromising the integrity of the fibrous network via microwave pyrolysis without inert gas. Sulfuric acid was used as a dehydration and activation agent, suppressing the release of volatile organic substances and eliminating greenhouse gas emissions. This approach also increased product yield and reduced energy consumption and sample shrinkage. The structures of the activated carbon textile showed EMI shielding within 20–30 dB (99.9% attenuation) in the 1–6 GHz frequency range. The maximum SSE/t value of 950.71 dB·cm2·g−1 was obtained with the microwave post-treated activated carbon textile. Micropores were dominant characteristics of these materials, and pore diameters increased with increased acid concentration. The maximum surface area of 383.92 m2/g was obtained with 8% acid. Ultrasound treatment reduced water-energy consumption and cost. Only 5 min of microwave post-treatment increased textile conductivity and thermal stability and contributed positively to electromagnetic shielding.
- Open Access
Development of Electromagnetic Shielding Composites Reinforced with Nonwovens Produced from Recycled Fibers
As a light-weight solution for electromagnetic shielding, this paper aims to investigate the development of electrically conductive composites that shield from electromagnetic radiation while providing sustainability by using recycled fibers in the structure of nonwoven reinforcement materials. The main novelty of this research is the conversion of waste fabrics into functional composites via a fast and inexpensive method. For this purpose, waste fabrics were recycled into fibers, and the recycled fibers were processed into needle-punched nonwovens to be used as reinforcement materials for electromagnetic shielding composites. Electrically conductive composite structures were obtained by adding copper (II) sulfate and graphite conductive particles with different ratios to polyester resin. The hand lay-up method was used for the production of composites. Electromagnetic shielding, electrical resistivity, and some mechanical properties of the composites were investigated. The results were analyzed statistically using IBM SPSS software version 18. The results have shown that up to 31.43 dB of electromagnetic shielding effectiveness was obtained in the 1–6 GHz frequency range. This result corresponds to a very good grade for general use and a moderate grade for professional use, according to FTTS-FA-003, exceeding the acceptable range for industrial and commercial applications of 20 dB. The composites developed in this research are good candidates to be used in various general and professional applications, such as plastic parts in household applications, electronic industry, building and construction industries, and other applications where light weight shielding materials are needed.
Open AccessDevelopment of Electromagnetic Shielding Composites Reinforced with Nonwovens Produced from Recycled Fibers
As a light-weight solution for electromagnetic shielding, this paper aims to investigate the development of electrically conductive composites that shield from electromagnetic radiation while providing sustainability by using recycled fibers in the structure of nonwoven reinforcement materials. The main novelty of this research is the conversion of waste fabrics into functional composites via a fast and inexpensive method. For this purpose, waste fabrics were recycled into fibers, and the recycled fibers were processed into needle-punched nonwovens to be used as reinforcement materials for electromagnetic shielding composites. Electrically conductive composite structures were obtained by adding copper (II) sulfate and graphite conductive particles with different ratios to polyester resin. The hand lay-up method was used for the production of composites. Electromagnetic shielding, electrical resistivity, and some mechanical properties of the composites were investigated. The results were analyzed statistically using IBM SPSS software version 18. The results have shown that up to 31.43 dB of electromagnetic shielding effectiveness was obtained in the 1–6 GHz frequency range. This result corresponds to a very good grade for general use and a moderate grade for professional use, according to FTTS-FA-003, exceeding the acceptable range for industrial and commercial applications of 20 dB. The composites developed in this research are good candidates to be used in various general and professional applications, such as plastic parts in household applications, electronic industry, building and construction industries, and other applications where light weight shielding materials are needed.
- Open Access
Functionalization of Woven Fabrics with PBT Yarns
Elasticity and recovery are important for clothing comfort, especially in the manufacture of apparel and sportswear. Recently, yarns containing PBT (polybutylene terephthalate), which are able to develop good elastic properties with high recovery after a finishing process (e.g., thermal treatment), have been used for this purpose. The aim of this work is to give a comprehensive overview of the use of PBT yarns in woven structure, with the aim of improving the elastic properties of cotton-like fabrics. The experimental part was divided into three main sequences to investigate the fabric properties (physical, elastic, UPF, comfort) influenced by (1) PBT-containing yarn structure, (2) weave and fabric structure (basic weaves and complex weaves) with PBT in weft direction, and (3) processing sequence—thermal treatment of PBT yarns or fabrics after weaving. According to the results, PBT-containing yarns have great potential for the production of lightweight elastic fabrics. The advantages of improving the elastic properties of fabrics by incorporating a relatively small amount of PBT yarns into the fabric only in certain areas, thereby minimally affecting the production costs, are demonstrated by a product with partially elastic areas obtained after thermal treatment.
Open AccessFunctionalization of Woven Fabrics with PBT Yarns
Elasticity and recovery are important for clothing comfort, especially in the manufacture of apparel and sportswear. Recently, yarns containing PBT (polybutylene terephthalate), which are able to develop good elastic properties with high recovery after a finishing process (e.g., thermal treatment), have been used for this purpose. The aim of this work is to give a comprehensive overview of the use of PBT yarns in woven structure, with the aim of improving the elastic properties of cotton-like fabrics. The experimental part was divided into three main sequences to investigate the fabric properties (physical, elastic, UPF, comfort) influenced by (1) PBT-containing yarn structure, (2) weave and fabric structure (basic weaves and complex weaves) with PBT in weft direction, and (3) processing sequence—thermal treatment of PBT yarns or fabrics after weaving. According to the results, PBT-containing yarns have great potential for the production of lightweight elastic fabrics. The advantages of improving the elastic properties of fabrics by incorporating a relatively small amount of PBT yarns into the fabric only in certain areas, thereby minimally affecting the production costs, are demonstrated by a product with partially elastic areas obtained after thermal treatment.
- Open Access
- 11 December 2019
- Published by Mugla Sitki Kocman University in Mugla Journal of Science and Technology
- Vol. 5 (2) , 97-109
INVESTIGATION OF THE PHYSICAL PROPERTIES OF POLYLACTIC ACID (PLA) BASED MELTBLOWN NONWOVENS FOR AGRICULTURAL APPLICATIONS
In this paper, a preliminary research was conducted to investigate some physical properties of PLA based meltblown nonwovens for agricultural applications. Air permeability, thickness, basis weight, biodegradability and fiber diameter properties of the samples were investigated. PLA based nonwovens that are suitable to be used without damaging the environment were obtained. Such bioplastic nonwovens can be used in various agricultural applications. The samples obtained in this research provided suitable air permeability, thickness and basis weight values for use in agricultural textiles, while being biologically degradable in ecological conditions in natural environments. Bioplastic meltblown nonwoven of 5.8-10.5 μm were obtained in this research. The results of the research presented in this paper will be used for the selection of a specific agricultural application and thus extensive research will be conducted for product development of the selected product type.
- 11 December 2019
- Published by Mugla Sitki Kocman University in Mugla Journal of Science and Technology
- Vol. 5 (2) , 97-109
Open AccessINVESTIGATION OF THE PHYSICAL PROPERTIES OF POLYLACTIC ACID (PLA) BASED MELTBLOWN NONWOVENS FOR AGRICULTURAL APPLICATIONS
In this paper, a preliminary research was conducted to investigate some physical properties of PLA based meltblown nonwovens for agricultural applications. Air permeability, thickness, basis weight, biodegradability and fiber diameter properties of the samples were investigated. PLA based nonwovens that are suitable to be used without damaging the environment were obtained. Such bioplastic nonwovens can be used in various agricultural applications. The samples obtained in this research provided suitable air permeability, thickness and basis weight values for use in agricultural textiles, while being biologically degradable in ecological conditions in natural environments. Bioplastic meltblown nonwoven of 5.8-10.5 μm were obtained in this research. The results of the research presented in this paper will be used for the selection of a specific agricultural application and thus extensive research will be conducted for product development of the selected product type.
- 7 November 2014
- Published by SAGE Publications in Textile Research Journal
- Vol. 85 (10) , 1009-1021
Electromagnetic shielding characterization of conductive woven fabrics produced with silver-containing yarns
This paper presents a study of the electromagnetic shielding characterization of woven fabrics, produced with two different types of conductive yarns, namely silver-containing (Ag/PA/Co) core yarns and silver-containing (Ag/PA-Co) blended yarns. The effect of various yarn and fabric properties, such as yarn count, core filament count, blend ratio, weft density, electrical resistivity, yarn type and wave frequency, on the electromagnetic shielding effectiveness was investigated. The results have shown that the shielding effectiveness can be tailored by changing the yarn and fabric parameters and also there are significant differences between the electromagnetic shielding characteristics and performances of the fabrics produced with different yarn groups. Such fabrics are future promising for both daily and professional uses, since they combine high shielding effectiveness performance and the comfort properties of conventional fabrics.
- 7 November 2014
- Published by SAGE Publications in Textile Research Journal
- Vol. 85 (10) , 1009-1021
Electromagnetic shielding characterization of conductive woven fabrics produced with silver-containing yarns
This paper presents a study of the electromagnetic shielding characterization of woven fabrics, produced with two different types of conductive yarns, namely silver-containing (Ag/PA/Co) core yarns and silver-containing (Ag/PA-Co) blended yarns. The effect of various yarn and fabric properties, such as yarn count, core filament count, blend ratio, weft density, electrical resistivity, yarn type and wave frequency, on the electromagnetic shielding effectiveness was investigated. The results have shown that the shielding effectiveness can be tailored by changing the yarn and fabric parameters and also there are significant differences between the electromagnetic shielding characteristics and performances of the fabrics produced with different yarn groups. Such fabrics are future promising for both daily and professional uses, since they combine high shielding effectiveness performance and the comfort properties of conventional fabrics.