RLRobin Löscher

Robin Löscher

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Robin Löscher has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Average-power scalability of multi-cycle terahertz sources based on periodically poled lithium niobate stacks

    by Patrick J. Dalton, Robin Löscher, Tim Vogel, Robert B. Appleby, Graeme Burt, Steven P. Jamison, Morgan T. Hibberd, Darren M. Graham, Clara J. Saraceno

    We demonstrate that narrowband multi-cycle terahertz (MC-THz) sources based on periodically poled lithium niobate (PPLN) wafer stacks can be driven by high repetition rate, high energy sub-picosecond ytterbium-doped lasers. Operating at a 10-kHz repetition rate with up to 104 W of pump power on a 10-wafer stack, we measure 26.4 mW of THz average power for a narrowband multi-cycle source. We identify and quantify strong lensing effects causing dramatic beam focusing in 47 wafer stacks, which act as a primary limitation in the current configuration, and present mitigation strategies for future scaling.

  • Open Access

    Laser-driven few-cycle terahertz sources with high average power

    by Robin Löscher, Tim Vogel, Samira Mansourzadeh, Mohsen Khalili, Alan Omar, Yicheng Wang, Martin Hoffmann, Clara J. Saraceno

    Ultrafast laser-driven terahertz sources are gaining in popularity in an increasingly wide range of scientific and technological applications. However, many fields continue to be severely limited by the typically low average power of these sources, which restricts speed, signal-to-noise ratio, and dynamic range in numerous measurements. Conversely, the past two decades have seen spectacular progress in high average power ultrafast laser technology based on ytterbium lasers, rendering hundreds of watts to kilowatts of average power available to this community to drive THz sources. This has opened the young field of high-average-power laser-driven THz time-domain spectroscopy, which holds the potential to revolutionize the applications of THz time-domain systems. In this perspective article, we discuss this young field and emphasize recent advancements in broadband terahertz sources utilizing high-power Yb-based ultrafast lasers as drivers, which are nearing watt-level average power. We discuss various approaches explored thus far, current challenges, prospects for scaling, and future research areas that will accelerate their implementation in applications.


  • Open Access

    Characterization of a laser filament-induced plasma in air at 10 kHz using optical emission spectroscopy

    by Malte C. Schroeder, Robin Löscher, Nikita Bibinov, Ihor Korolov, Peter Awakowicz, Thomas Mussenbrock, Clara J. Saraceno

    The increasing availability of high-power Yb-based ultrafast laser-amplifier systems has opened the possibility of air filamentation at high repetition rates >1 kHz. In this new regime, accumulation effects cannot be ruled out; therefore, characterizing the plasma parameters and afterglow plasma-chemical kinetics becomes increasingly relevant. In this work, we use optical emission spectroscopy to measure nanosecond dynamics of gas temperature and electron temperature, species-specific decay times, and electron density of an atmospheric air laser filament produced by a high-average power femtosecond laser at a high repetition rate of 10 kHz. The molecular excitation mechanisms behind the nitrogen photoemissions are derived from vibrational distributions and temporal behavior of the studied emission bands. The presented diagnostic technique offers a complementary but more holistic measurement approach to optical probe schemes to characterize the laser-filament-induced plasma wake for high repetition rate filaments.


  • Open Access

    Average-power scalability of multi-cycle terahertz sources based on periodically poled lithium niobate stacks

    by Patrick J. Dalton, Robin Löscher, Tim Vogel, Robert B. Appleby, Graeme Burt, Steven P. Jamison, Morgan T. Hibberd, Darren M. Graham, Clara J. Saraceno

    We demonstrate that narrowband multi-cycle terahertz (MC-THz) sources based on periodically-poled lithium niobate (PPLN) wafer stacks can be driven by high repetition-rate, high energy femtosecond ytterbium-doped lasers. Operating at 10-kHz repetition rate with up to 104 W of pump power on a 10-wafer stack, we measure 26.4 mW of THz average power for a narrowband multi-cycle source. We identify and quantify strong lensing effects causing dramatic beam focusing in 47 wafer stacks which act as a primary limitation in the current configuration, and present mitigation strategies for future scaling. This first study of high average power narrowband multi-cycle THz sources offers a path forward to Watt-level high repetition rate sources using thin lithium niobate plates.

  • Open Access

    Double-pass multipass cell compressor for peak power enhancement of µJ level pulses

    by Alan Omar, Robin Löscher, Martin Hoffmann, Clara J. Saraceno

    Multipass cells (MPCs) have proven to be a robust and versatile solution for spectral broadening and subsequent compression of high average power Yb-based ultrafast lasers with multi-100 fs pulse durations. However, generating high compression ratios and peak power enhancement at low pulse energies (few-µJ) with compact setups remains challenging because of the moderate peak intensity available for broadening. In this regime, bulk solid-state plates are typically required, and their discrete nature in the nonlinear propagation reduces the B-integral tolerable per pass without beam degradation. In this paper, we present a simple approach for nonlinear pulse compression at µJ pulse energy with large compression ratio. We suggest a bulk-based double-pass MPC scheme, where the pulses propagate once through a traditional MPC, are partially compressed at the output and then are sent back for a second broadening step through the same MPC. We numerically optimize and apply this concept to compress a modelocked thin-disk laser with 112 W average power and 8.8 µJ pulses from 600 fs to 40 fs, achieving a compression ratio of 15, and peak power enhancement of 9.3, while maintaining a high overall optical efficiency of 89% and excellent spatial beam quality. The final peak power of our system reaches 122 MW, and the high reachable peak intensity of our system is confirmed by generating a microplasma in ambient air that will be used in future THz generation experiments.


  • Open Access

    Time-resolved measurements of cumulative effects in gas dynamics induced by high-repetition-rate femtosecond laser filamentation

    by Robin Löscher, Malte C. Schroeder, Alan Omar, Clara J. Saraceno

    The advent of high-average-power, ultrafast ytterbium-based lasers allows us to generate laser filaments at repetition rates ranging from tens of kHz up to hundreds of kHz. At such high-repetition rates, the inter-pulse time lies below the time required for the total diffusion of the deposited heat by each laser pulse, leading to cumulative hydrodynamic effects. Here, we present experimental time-resolved measurements of these dynamics in air for laser repetition rates between 1 and 100 kHz. We measure the change in the air refractive index caused by the localized heat deposition and the length of the filament-generated plasma channel, with which we can infer the corresponding change in air density. We observe that at repetition rates above 10 kHz, stationary density depletions with vanishing dynamics emerge. Our findings are of wide relevance for the fields of high-repetition-rate laser filamentation and its applications as well as THz generation from laser-induced plasma sources.


  • Open Access

    High-peak-power 2.1 µm femtosecond holmium amplifier at 100 kHz

    by Anna Suzuki, Boldizsar Kassai, Yicheng Wang, Alan Omar, Robin Löscher, Sergei Tomilov, Martin Hoffmann, Clara J. Saraceno

    High-power ultrafast laser sources in the short-wave infrared region are of great interest for numerous applications, including secondary sources of radiation and processing of materials commonly opaque in the near-infrared region. In this wavelength region, direct laser amplification around 2.1 µm wavelength within the atmospheric transparency window is particularly attractive for realizing compact and efficient high-power lasers. However, this wavelength region was widely underrepresented in femtosecond laser technology so far. Here, we report on a 2.1 µm laser system delivering 97 fs pulses with an unprecedented combination of high peak power of 525 MW and high repetition rate of 100 kHz. The amplifier system consists of a mode-locked oscillator seeding a regenerative amplifier (RA) using the broadband material holmium (Ho)-doped CaAlGdO4 (CALGO), operating in the chirped pulse amplification (CPA) scheme and a nonlinear compression stage based on a Herriott-type multi-pass cell (MPC) with bulk material. We demonstrate the potential of this laser system by generating a microplasma in ambient air, demonstrating its high intensity for future plasma-driven secondary sources. This system bridges the gap between conventional 1-to-10 kHz amplifiers and high-power MHz laser oscillators in this attractive wavelength range.


  • Open Access

    Multi-milliwatt average power two-color air-plasma terahertz source at 100 kHz repetition rate

    by Robin Löscher, Malte C. Schroeder, Tim Vogel, Alan Omar, Adam Hasso, Claudius Hoberg, Martina Havenith, Clara J. Saraceno

    Ultrafast THz transients with large spectral bandwidths are commonly generated in the two-color air-plasma scheme, typically driven by high-pulse-energy laser sources, operating at low repetition rates up to a few kHz. The low repetition rate of these sources is a strong limiting factor to reaching high dynamic ranges in measurements involving long integration times or multi-dimensional scans. The advent of high-power Yb-based laser sources in combination with nonlinear temporal compression schemes opens the door to air-plasma THz sources at significantly higher repetition rates up to hundreds of kHz and beyond. In this study, we investigate for the first time repetition rate scaling in the two-color filament plasma scheme at repetition rates ranging from 1 kHz up to 100 kHz. We study the influence of repetition rate on THz yield and observe a correlation between the decrease of the optical-to-THz conversion efficiency and the gas density depletion in the filamentation region that we measure using interferometry. The experimentally observed optical-to-THz conversion efficiencies are in approximate agreement with a simple one-dimensional photocurrent model we developed. These findings set the foundation for future repetition rate scaling experiments towards the MHz region, using the broadband and affordable two-color air-plasma scheme. At 100 kHz, we generate THz radiation with a maximum average power of 2.8 mW and peak electric fields reaching 165 kV/cm. Using electro-optic sampling, we detect frequencies up to 23 THz, showing the broadband nature of the source. This source is a promising alternative both for future linear and nonlinear ultra-broadband spectroscopic investigations at greatly accelerated measurement times.


  • Balanced air-biased detection of terahertz waveforms

    by Alexander Holm Ohrt, Olivér Nagy, Robin Löscher, Clara J. Saraceno, Binbin Zhou, Peter Uhd Jepsen

    A novel, to the best of our knowledge, balanced air-biased coherent detection scheme for capturing ultrabroadband terahertz (THz) waveforms is implemented. The balanced detection scheme allows for coherent detection at the full repetition rate of the laser system without requiring bias modulation, signal generators, or lock-in amplifiers while doubling the dynamic range and quadrupling the signal-to-noise ratio compared to conventional air-biased coherent detection. These advantages are achieved by rotating the bias electrodes by 90° relative to the conventional scheme. With a 1 kHz driving laser, the scheme enables sub-second, high-fidelity waveform acquisition with a continuously moving delay stage, demonstrated by collecting 200 waveforms in 100 s. The balanced detection scheme paves the way for much faster and higher quality 2D ultrabroadband terahertz spectroscopy.


  • Open Access

    High-power sub-picosecond filamentation at 1.03 µ m with high repetition rates between 10 and 100 kHz

    by Robin Löscher, Victor Moreno, Dionysis Adamou, Denizhan K. Kesim, Malte C. Schroeder, Matteo Clerici, Jean-Pierre Wolf, Clara J. Saraceno

    Filamentation has extensively been explored and is well understood at repetition rates <1 kHz due to the typical availability of multi-mJ laser systems at a moderate average power. The advent of high-power Yb-lasers opened new possibilities for filamentation research. However, so far, high average power Yb systems have mostly been explored to increase the driving pulse energy to several hundreds of mJ and not at significantly higher repetition rates. In this paper, we study, for the first time, long filaments at unprecedented high repetition rates of 10, 40, and 100 kHz using a 500-W Yb-doped thin-disk amplifier driver operating with sub-700 fs pulses. We compare the filament length, density hole, and fluorescence at a constant peak power but different repetition rates and find a strong dependence on filament length and density depletion with repetition rate. Our analysis reveals the emergence of a significant stationary density depletion at repetition rates of 40 and 100 kHz. The corresponding reduction in the breakdown threshold by increasing the laser repetition rate observed in our study signifies a promising avenue for enhancing the efficiency and reliability of electric discharge triggering in various scenarios. Using capacitive plasma probe measurements, we address the limitations of fluorescence imaging-based measurements and demonstrate a systematic underestimation of filament length. This work contributes to a deeper understanding of the interplay between laser repetition rates, filamentation, and heat-driven density depletion effects from high-repetition-rate high-power laser systems and will contribute to guiding future research, making use of filaments at high repetition rates.