Dongyun Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dongyun Liu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Jiahui Wang
School of Landscape Architecture, Beijing Forestry University, Beijing 100080, China
2 shared publications - Ruizi He
School of Landscape Architecture, Beijing Forestry University, Beijing 100080, China
2 shared publications - Hao Yin
Beijing Forestry University,Beijing,China, China
1 shared publication - Hongye Li
School of Landscape Architecture, Beijing Forestry University, Beijing 100083, China
1 shared publication - Muhammad Amir Siddique
Department of Landscape Architecture, School of Architecture, Tianjin University, Tianjin 300272, China
1 shared publication - Shen Duanmu
School of Landscape Architecture, Beijing Forestry University, Beijing 100083, China
1 shared publication
Latest Publications
- Open Access
- 23 April 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (9) , 1287
Multi-Scale Effects of 2D/3D Urban Morphology Factors on Land Surface Temperature Using LightGBM-SHAP: A Case Study in Beijing
Understanding how urban morphology regulates Land Surface Temperature (LST) is important in the context of rapid urbanization and increasingly frequent extreme climate events. Although both two-dimensional (2D) and three-dimensional (3D) morphological factors are known to affect urban thermal environments, their relative explanatory roles, factor-specific optimal scales, and nonlinear responses are still insufficiently quantified within a unified multi-scale framework. This study focuses on the area within Beijing’s Fifth Ring Road and applies an interpretable LightGBM-SHAP framework to examine the multi-scale relationships between integrated 2D/3D urban morphology and LST using a Landsat 8 image acquired during a typical summer daytime heatwave event. Five analytical scales (150, 300, 600, 900, and 1200 m) are evaluated to compare factor importance, identify optimal explanatory scales, and characterize threshold-like response patterns. The LightGBM models maintained relatively strong predictive performance across all scales under spatial cross-validation, with the highest mean R2 observed at 600 m, followed closely by 300 m. The results indicate a clear scale-dependent contrast in explanatory dominance: 2D factors show stronger associations with LST at fine-to-medium scales, whereas 3D factors become more influential at coarser scales. From a process perspective, this contrast is consistent with differences in surface-cover-related and vertical-structure-related thermal regulation, although the underlying physical mechanisms are not directly tested in this study. SHAP analysis further identifies factor-specific nonlinear response intervals for several key indicators under the selected extreme-heat condition. For example, a cooling tendency is observed when Mean Building Height (MBH) exceeds 15 m at the 150 m scale. These findings provide scale-explicit and context-specific evidence for interpreting urban morphology–LST relationships and support heat-mitigation strategies that combine micro-scale surface-cover optimization with larger-scale regulation of building height variation and urban roughness. The identified response intervals should be interpreted as empirical references under a typical daytime heatwave condition rather than as universally transferable climatological thresholds.
- 23 April 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (9) , 1287
Open AccessMulti-Scale Effects of 2D/3D Urban Morphology Factors on Land Surface Temperature Using LightGBM-SHAP: A Case Study in Beijing
Understanding how urban morphology regulates Land Surface Temperature (LST) is important in the context of rapid urbanization and increasingly frequent extreme climate events. Although both two-dimensional (2D) and three-dimensional (3D) morphological factors are known to affect urban thermal environments, their relative explanatory roles, factor-specific optimal scales, and nonlinear responses are still insufficiently quantified within a unified multi-scale framework. This study focuses on the area within Beijing’s Fifth Ring Road and applies an interpretable LightGBM-SHAP framework to examine the multi-scale relationships between integrated 2D/3D urban morphology and LST using a Landsat 8 image acquired during a typical summer daytime heatwave event. Five analytical scales (150, 300, 600, 900, and 1200 m) are evaluated to compare factor importance, identify optimal explanatory scales, and characterize threshold-like response patterns. The LightGBM models maintained relatively strong predictive performance across all scales under spatial cross-validation, with the highest mean R2 observed at 600 m, followed closely by 300 m. The results indicate a clear scale-dependent contrast in explanatory dominance: 2D factors show stronger associations with LST at fine-to-medium scales, whereas 3D factors become more influential at coarser scales. From a process perspective, this contrast is consistent with differences in surface-cover-related and vertical-structure-related thermal regulation, although the underlying physical mechanisms are not directly tested in this study. SHAP analysis further identifies factor-specific nonlinear response intervals for several key indicators under the selected extreme-heat condition. For example, a cooling tendency is observed when Mean Building Height (MBH) exceeds 15 m at the 150 m scale. These findings provide scale-explicit and context-specific evidence for interpreting urban morphology–LST relationships and support heat-mitigation strategies that combine micro-scale surface-cover optimization with larger-scale regulation of building height variation and urban roughness. The identified response intervals should be interpreted as empirical references under a typical daytime heatwave condition rather than as universally transferable climatological thresholds.
- Open Access
- 27 March 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (7) , 3276
Exploration of Factors That Reduce Residents’ Willingness to Use Different Types of Urban Parks in Beijing
Urban parks are vital for enhancing residents’ quality of life. With ongoing urban expansion, park visitation and quality expectations have risen, yet research on ecosystem disservices—i.e., the negative impacts of parks—remains limited compared with studies on ecosystem services. This study addresses this gap by investigating why residents may avoid parks, focusing on how negative perceptions vary across different park types. Through questionnaire surveys conducted in 68 parks across five categories in central Beijing, residents’ concerns were analyzed. Findings show significant differences among park type: users of small neighborhood parks emphasized internal noise, infrastructure, and cleanliness; while users of medium and large regional park users prioritized safety risks, followed by landscape and infrastructure issues. Users of historically significant parks raised concerns related to overcrowding and plant emissions, while those of special theme parks highlighted issues related to the cultural or natural atmosphere. Accordingly, park renovation should adopt type-specific strategies rather than uniform approaches. Drawing on successful Beijing cases, targeted improvements and a sustainable business operation model are proposed to address funding limitations. These results align with China’s park classification framework and offer insights for international urban park management, ultimately contributing to improved resident well-being and reduced urban inequality.
- 27 March 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (7) , 3276
Open AccessExploration of Factors That Reduce Residents’ Willingness to Use Different Types of Urban Parks in Beijing
Urban parks are vital for enhancing residents’ quality of life. With ongoing urban expansion, park visitation and quality expectations have risen, yet research on ecosystem disservices—i.e., the negative impacts of parks—remains limited compared with studies on ecosystem services. This study addresses this gap by investigating why residents may avoid parks, focusing on how negative perceptions vary across different park types. Through questionnaire surveys conducted in 68 parks across five categories in central Beijing, residents’ concerns were analyzed. Findings show significant differences among park type: users of small neighborhood parks emphasized internal noise, infrastructure, and cleanliness; while users of medium and large regional park users prioritized safety risks, followed by landscape and infrastructure issues. Users of historically significant parks raised concerns related to overcrowding and plant emissions, while those of special theme parks highlighted issues related to the cultural or natural atmosphere. Accordingly, park renovation should adopt type-specific strategies rather than uniform approaches. Drawing on successful Beijing cases, targeted improvements and a sustainable business operation model are proposed to address funding limitations. These results align with China’s park classification framework and offer insights for international urban park management, ultimately contributing to improved resident well-being and reduced urban inequality.
- Open Access
How Landscape Morphology Shapes Urban Park Cooling Effects Across Different Scales? A Case Study of Wuhan, China
As a typical nature-based solution, urban parks play an important role in mitigating urban heat island effects. Although previous studies highlighted the complex impacts of landscape morphology on urban park cooling effects (PCE), the interactions and impact thresholds between specific features on PCE remain insufficiently explored across different scales. Here, taking 119 parks in Wuhan, China, as examples, the PCE and their responses to landscape morphology were quantified across three scales, including 47 small, 41 medium, and 31 large parks. Results showed that 79.8% of parks (95) exhibited obvious cooling effects. From small to large parks, the largest park cooling distance (LPCD), area (LPCA), and intensity (LPCI), as well as the accumulative park cooling gradient (APCG) and intensity (APCI), showed upward trends, while largest park cooling efficiency (LPCE) declined. Scale-dependent differences in landscape morphology impacting PCE were evident. In small and medium parks, LPCD and LPCA were mainly shaped by the surrounding environment, while LPCI and LPCE were primarily determined by internal morphology. In large parks, LPCA, APCI, and APCG were impacted by the surrounding environment, while LPCD and LPCI were dominated by internal morphology. Moreover, interactions between specific landscape morphology features significantly enhanced the model explanatory power and exhibited clear impact thresholds on PCE. Overall, this study enhances our understanding of cross-scale cooling mechanisms of urban parks and offers practical implications for heat-governance-oriented park planning.
Open AccessHow Landscape Morphology Shapes Urban Park Cooling Effects Across Different Scales? A Case Study of Wuhan, China
As a typical nature-based solution, urban parks play an important role in mitigating urban heat island effects. Although previous studies highlighted the complex impacts of landscape morphology on urban park cooling effects (PCE), the interactions and impact thresholds between specific features on PCE remain insufficiently explored across different scales. Here, taking 119 parks in Wuhan, China, as examples, the PCE and their responses to landscape morphology were quantified across three scales, including 47 small, 41 medium, and 31 large parks. Results showed that 79.8% of parks (95) exhibited obvious cooling effects. From small to large parks, the largest park cooling distance (LPCD), area (LPCA), and intensity (LPCI), as well as the accumulative park cooling gradient (APCG) and intensity (APCI), showed upward trends, while largest park cooling efficiency (LPCE) declined. Scale-dependent differences in landscape morphology impacting PCE were evident. In small and medium parks, LPCD and LPCA were mainly shaped by the surrounding environment, while LPCI and LPCE were primarily determined by internal morphology. In large parks, LPCA, APCI, and APCG were impacted by the surrounding environment, while LPCD and LPCI were dominated by internal morphology. Moreover, interactions between specific landscape morphology features significantly enhanced the model explanatory power and exhibited clear impact thresholds on PCE. Overall, this study enhances our understanding of cross-scale cooling mechanisms of urban parks and offers practical implications for heat-governance-oriented park planning.
- Open Access
Assessing the Impact of Urban Spatial Form on Land Surface Temperature Using Random Forest—Taking Beijing as a Case Study
To examine the integrated influence of urban spatial form on the urban heat island (UHI) effect, this study selects the area within Beijing’s Fifth Ring Road as a case study. A multiscale grid system is established to quantify fourteen two- and three-dimensional morphological indicators. A Random Forest algorithm is employed to assess the relative importance of each factor. The optimal analytical scale for each key variable is then identified, and its nonlinear relationship with land surface temperature (LST) is analyzed at that scale. The main findings are as follows: (1) The Random Forest model achieves the highest predictive accuracy at a 600 m scale, significantly outperforming traditional linear models by effectively addressing multicollinearity. This suggests that machine learning offers robust technical support for UHI research. (2) Form variables exhibit distinct scale dependencies. Two-dimensional indicators dominate at medium to large scales, while three-dimensional indicators are more influential at smaller scales. Specifically, the mean building height is most significant at the 150 m scale, the standard deviation of building height at 300 m, and the impervious surface fraction at 600–1200 m. (3) Strong nonlinear effects are identified. The bare soil fraction below 0.12 intensifies surface warming; the water body fraction between 0.20 and 0.35 provides the strongest cooling; plant coverage offers maximum cooling between 0.25 and 0.45; building density cools below 0.3 buildings/hm2 but contributes to warming beyond this threshold; building coverage ratio generates the greatest warming between 0.08 and 0.32; height variability provides optimal cooling between 8 m and 40 m; and mean building height shows a positive correlation with LST below 6 m but a negative one above that height.
Open AccessAssessing the Impact of Urban Spatial Form on Land Surface Temperature Using Random Forest—Taking Beijing as a Case Study
To examine the integrated influence of urban spatial form on the urban heat island (UHI) effect, this study selects the area within Beijing’s Fifth Ring Road as a case study. A multiscale grid system is established to quantify fourteen two- and three-dimensional morphological indicators. A Random Forest algorithm is employed to assess the relative importance of each factor. The optimal analytical scale for each key variable is then identified, and its nonlinear relationship with land surface temperature (LST) is analyzed at that scale. The main findings are as follows: (1) The Random Forest model achieves the highest predictive accuracy at a 600 m scale, significantly outperforming traditional linear models by effectively addressing multicollinearity. This suggests that machine learning offers robust technical support for UHI research. (2) Form variables exhibit distinct scale dependencies. Two-dimensional indicators dominate at medium to large scales, while three-dimensional indicators are more influential at smaller scales. Specifically, the mean building height is most significant at the 150 m scale, the standard deviation of building height at 300 m, and the impervious surface fraction at 600–1200 m. (3) Strong nonlinear effects are identified. The bare soil fraction below 0.12 intensifies surface warming; the water body fraction between 0.20 and 0.35 provides the strongest cooling; plant coverage offers maximum cooling between 0.25 and 0.45; building density cools below 0.3 buildings/hm2 but contributes to warming beyond this threshold; building coverage ratio generates the greatest warming between 0.08 and 0.32; height variability provides optimal cooling between 8 m and 40 m; and mean building height shows a positive correlation with LST below 6 m but a negative one above that height.
- Open Access
- 22 November 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (12) , 1716
Assessing the Impact of Spatiotemporal Land Cover Changes on the Urban Heat Islands in Developing Cities with Landsat Data: A Case Study in Zhanjiang
Land cover changes (LCCs) due to urbanization cause urban heat islands (UHIs), significantly affecting land surface temperature (LST) through spatiotemporal changes in compositions, parameters, and patterns. Land cover and LST have been studied in various cities; however, indicative research into heterogeneous LCC’s impact on LST in less-developed cities remains incomplete. This study analyzed new Landsat images of Zhanjiang, taken from 2004 to 2022, to determine the impact of three LCC indicators (compositions, parameters, and patterns) on LSTs. The urban thermal field variance index (UTFVI) was used to describe the distribution and variation in LST. We also quantified the cooling or warming benefits of various LCCs. The results indicate that the average temperature in the land urban heat island (SUHI) area rose to 30.6 °C. The average temperature of the SUHI was 3.32 °C higher than that of the non-SUHI area, showing the characteristic of shifting to counties and multi-core development. The LST increases by 0.37–0.67 °C with an increase of 0.1 in the normalized difference building index (NDBI), which is greater than the cooling benefit of the normalized difference of vegetation index (NDVI). The impact of landscape pattern indices on impervious surfaces and water is higher than that on vegetation and cropland, with a rising influence on impervious surfaces and a decreasing impact on water. The predominant cooling patches are vegetation and water, while large areas of impervious surface and cropland aggravate UHIs for industrial and agricultural activities. These findings are intended to guide future urban layouts and planning in less-developed cities, with thermal climate mitigation as a guiding principle.
- 22 November 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (12) , 1716
Open AccessAssessing the Impact of Spatiotemporal Land Cover Changes on the Urban Heat Islands in Developing Cities with Landsat Data: A Case Study in Zhanjiang
Land cover changes (LCCs) due to urbanization cause urban heat islands (UHIs), significantly affecting land surface temperature (LST) through spatiotemporal changes in compositions, parameters, and patterns. Land cover and LST have been studied in various cities; however, indicative research into heterogeneous LCC’s impact on LST in less-developed cities remains incomplete. This study analyzed new Landsat images of Zhanjiang, taken from 2004 to 2022, to determine the impact of three LCC indicators (compositions, parameters, and patterns) on LSTs. The urban thermal field variance index (UTFVI) was used to describe the distribution and variation in LST. We also quantified the cooling or warming benefits of various LCCs. The results indicate that the average temperature in the land urban heat island (SUHI) area rose to 30.6 °C. The average temperature of the SUHI was 3.32 °C higher than that of the non-SUHI area, showing the characteristic of shifting to counties and multi-core development. The LST increases by 0.37–0.67 °C with an increase of 0.1 in the normalized difference building index (NDBI), which is greater than the cooling benefit of the normalized difference of vegetation index (NDVI). The impact of landscape pattern indices on impervious surfaces and water is higher than that on vegetation and cropland, with a rising influence on impervious surfaces and a decreasing impact on water. The predominant cooling patches are vegetation and water, while large areas of impervious surface and cropland aggravate UHIs for industrial and agricultural activities. These findings are intended to guide future urban layouts and planning in less-developed cities, with thermal climate mitigation as a guiding principle.