MTMaksat Tabylganov

Maksat Tabylganov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Maksat Tabylganov has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Diagnosis of Atypical Water Injection Mechanisms for Production System Integrity Management: A Case Study of X Field

    by Bakiyeva Aliya Bulatovna, Saduakassov Danabek Saldyrovich, Tabylganov Maksat Toksanovich, Mukhambetov Bolat Turalyuly, Ayapbergenov Yerbolat Ozarbaevich

    In the absence of a reservoir pressure maintenance (RPM) system at Field X, a critical increase in water cut to 92.6% has been observed, with current production at 72.4% of the initial recoverable oil reserves. Such a high water cut at a stage that does not correspond to full production suggests the presence of atypical mechanisms. This study aimed to comprehensively analyze the causes of the abnormal water cut using modern diagnostic methods, including geophysical well logging (GWL), reservoir pressure monitoring, hydrogeochemical analysis of associated waters and detailed laboratory studies of core samples. The analysis revealed that the primary cause is a man-made breach in the production column of Well #4, resulting in the overflow of highly mineralized water from the overlying Albian-Cenomanian aquifer into the productive J-XI formation. Petrophysical studies revealed high reservoir heterogeneity. However, the oil displacement coefficient by water was 0.53 for highly permeable formations, ruling out low oil recovery as the main cause of water flooding. Key evidence of the human-made nature of the problem includes the abnormal increase in reservoir pressure, from 23.9 MPa in 2022 to 25.5 MPa in 2023, as well as the presence of sulphate ions in the production water, which is characteristic of the Albian-Cenomanian complex. A set of practical recommendations has been developed, including the urgent repair and insulation of Well #4, the introduction of a casing integrity monitoring system and the adaptation of the development strategy. The results emphasize the importance of monitoring the technical condition of the well fleet to ensure the effective late-stage development of similar fields. The study demonstrates that integrating this diagnostic methodology into a production management system enables proactive risk mitigation, supports decision-making for well intervention, and contributes to optimizing the overall production strategy in mature fields.

  • Open Access

    Comparative Analysis of Methods for Determining the Wax Crystallization Onset Temperature of High-Paraffin Crude Oil from the Uzen Field

    by Ryskol Bayamirova, Aliya Togasheva, Danabek Saduakassov, Akshyryn Zholbasarova, Maxat Tabylganov, Nurzhan Shilanov, Manshuk Sarbopeyeva, Nurzhaina Nurlybai, Shyngys Nugumarov, Aigul Gusmanova, et al.

    This study is devoted to a comparative analysis of modern methods for determining the wax crystallization onset temperature (WCOT) of high-paraffin crude oil from the Uzen field. The objects of investigation were crude oil samples from the 13th reservoir horizon with a paraffin mass content ranging from 22.5% to 27.5%. For the first time in the practice of the oil and gas industry of Kazakhstan, a comprehensive comparison of results obtained using two fundamentally different approaches was performed: the light transmittance method using the KING-UNNP-70 apparatus, which simulates reservoir conditions (pressure of 12 MPa), and a dynamic method using a Wax Flow Loop facility, which reproduces crude oil flow in a pipeline. The experimental results showed that the light transmittance method detects the appearance of the first microcrystals at temperatures of 38.0–41.7 °C, whereas the dynamic method yields higher WCOT values, ranging from 41.0 °C to 44.0 °C. It was also found that the temperature of bulk crystallization, characterizing intensive solid phase formation, lies within the range of 33.5–35.0 °C. The results confirm that under flow conditions, paraffin crystallization begins at higher temperatures compared to static conditions, which is of critical importance for the design of crude oil gathering and transportation systems. The obtained data allow more accurate prediction of the risks of asphaltene–resin–paraffin deposits (ARPD) formation and optimization of technological operating conditions of wells at the late stage of field development.


  • Comprehensive assessment of well operation measures at the Kalamkas oil field

    by Sh. Yessenov Caspian University of Technologies and Engineering, R.U. Bayamirova, A.R. Togasheva, A.T. Zholbasarova, D.S. Saduakasov, Sarbopeeva, M.T. Tabylganov

    The study presents a comprehensive assessment of the effectiveness of measures aimed at preventing complications during the operation of wells at the Kalamkas oil field. The main directions of chemicalization of oil production processes are considered: thermal flushing with hot water and surfactant “Rauan-100,” acid treatments (HCl-based stimulation), near-wellbore treatment of injection wells with the biocide “Rancid-7004,” as well as the application of scale inhibitors “Randim-4021” and corrosion inhibitors “Rankor-1101.” The analysis showed that thermal flushing restores well productivity for a short period, acid treatments increase the injectivity index of injection wells by 1.4–1.6 times, and biocidal treatments reduce hydrogen sulfide content in the produced fluid on average by a factor of 3. The use of scale and corrosion inhibitors proved effective, extending the service life of equipment. Based on the results of the study, recommendations were developed for further application and optimization of chemical well protection technologies.

  • Open Access

    PROBLEMS OF SAND MANIFESTATION IN THE FIELDS OF KAZAKHSTAN: METHODS AND SOLUTIONS

    by D. Saduakassov, A. Gusmanova, A. Zholbasarova, R. Bayamirovа, A. Togashevа, M. Tabylganov, M. Sarbopeevа

    Sand manifestation in oil and gas wells of Kazakhstan remains a pressing issue that significantly hinders their reliable and efficient operation. This article analyzes equipment failures occurring during well operation under conditions of high mechanical impurity content and proposes possible solutions. As the object of study, the causes of rod screw pump (RSP) failures at the Karazhanbas, North Buzachi, and Kumkol fields were examined. The results showed that the main cause of failures is sand manifestation, accounting for up to 51% of all cases. The article proposes a method to prevent the formation of sand plugs by creating a bottomhole sand collector at an optimal depth. Economic analysis demonstrated that this technology significantly reduces repair costs and extends the inter-repair period of well operation. The effectiveness of the proposed solution is confirmed by field data and detailed calculations.

  • Open Access

    Engineering and Technological Approaches to Well Killing in Hydrophilic Formations with Simultaneous Oil Production Enhancement and Water Shutoff Using Selective Polymer-Inorganic Composites

    by Valery Meshalkin, Rustem Asadullin, Sergey Vezhnin, Alexander Voloshin, Rida Gallyamova, Annaguly Deryaev, Vladimir Dokichev, Anvar Eshmuratov, Lyubov Lenchenkova, Artem Pavlik, et al.

    Well-killing operations in water-sensitive hydrophilic formations are often complicated by extended well clean-up periods and, in some cases, failure to restore the well’s production potential post-kill. Typical development targets exhibiting these properties include the Neocomian and Jurassic deposits of fields in Western Siberia and Western Kazakhstan. This paper proposes a well-killing method incorporating simultaneous near-wellbore treatment. In cases where heavy oil components (asphaltenes, resins, or paraffins) are deposited in the near-wellbore zone, their removal with a solvent results in post-operation flow rates that exceed pre-restoration levels. For wells not affected by asphaltene, resin, and paraffin deposits, killing is performed using a blocking pill of invert emulsion stabilized with an emulsifier and hydrophobic nanosilica. During filtration into the formation, this emulsion does not break but rather reforms according to the pore throat sizes. Flow rates in such wells typically match pre-restoration levels. The described engineering solution proves less effective when the well fluid water cut exceeds 60%. For wells exhibiting premature water breakthrough that have not yet produced their estimated oil volume, the water source is identified, and water shutoff operations are conducted. This involves polymer-gel systems crosslinked with resorcinol and paraform, reinforced with inorganic components such as chrysotile microdispersions, micro- and nanodispersions of shungite mineral, and gas black. Oscillation testing identified the optimal additive concentration range of 0.6–0.7 wt%, resulting in a complex modulus increase of up to 25.7%. The most effective polymer-inorganic composite developed by us, incorporating gas black, demonstrates high water shutoff capability (residual resistance factor ranges from 12.5 to 65.0 units within the permeability interval of 151.7 to 10.5 mD). Furthermore, the developed composites exhibit the ability to selectively reduce water permeability disproportionately more than oil permeability. Filtration tests confirmed that the residual permeability to oil after placing the blocking composition with graphene is 6.75 times higher than that to water. Consequently, such treatments reduce the well water cut. Field trials confirmed the effectiveness of the developed polymer-inorganic composite systems.


  • Assessment of reservoir filtration-capacity properties and saturation at the Morskoye field

    by A. O Zhailiyev, V. L Khomenko, M. T Tabylganov, A. A Shukmanova, O. A Pashchenko

    Purpose. The development of a methodology for interpreting geophysical data for complex terrigenous reservoirs based on multidimensional interpretation relationships and consideration of thin layers to improve the accuracy of evaluating reservoir filtration-capacity properties and saturation. Methodology. A comprehensive research approach was employed, which included: generalization of petrophysical characteristics of formations based on well logging data (WLD); their analysis using multidimensional interpretation models; investigation of filtration-capacity properties (FCP) in thin reservoirs; and the construction of graphical and statistical models for visualizing the obtained results. Findings. A methodology for evaluating filtration-capacity properties based on petrophysical and interpretation models of WLD has been developed. This methodology is designed for analyzing complex terrigenous reservoirs, including thin formations (up to 2 meters), and enhances the accuracy of their interpretation. The effectiveness of the software was confirmed through the analysis of such reservoirs, ensuring higher calculation precision and accelerating the decision-making process. New interpretation approaches have been developed, taking into account formation structure patterns and the distribution of their filtration-capacity properties and saturation. A comparison with production data validated the methodology, improving the accuracy and efficiency of geophysical studies of oil and gas-bearing sequences. Originality. For the first time, a methodology for evaluating filtration-capacity properties has been proposed based on the application of multidimensional interpretation relationships in petrophysical and interpretation models, which has enabled data integration and adaptation for studying various types of terrigenous rocks. This, in turn, has expanded the possibilities for analyzing complex reservoirs and improved the accuracy of assessing their filtration-capacity properties and saturation. For the first time, patterns in the structure of terrigenous reservoirs have been identified, and the distribution characteristics of their filtration-capacity parameters and saturation have been quantitatively justified. Practical value. The application of multidimensional interpretation relationships in the developed methodology has significantly enhanced the reliability and efficiency of geophysical analysis of oil and gas-bearing sequences. The formation of models within a unified methodological approach has systematized the study process of complex reservoirs, allowing for the standardization of their investigation methods at various stages of well analysis. The use of the developed models enables a more precise assessment of reservoir oil and gas saturation, helping to minimize risks in production planning and increase hydrocarbon recovery rates. The proposed methodology can be implemented in geophysical studies of fields with various types of terrigenous rocks, making it a universal and valuable tool for a wide range of tasks in the oil and gas industry.


  • Open Access

    Reservoir Development and Well Operation Control Methods: Practical Application

    by Ryskol Bayamirova, Aliya Togasheva, Danabek Saduakasov, Akshyryn Zholbasarova, Maxat Tabylganov, Aigul Gusmanova, Manshuk Sarbopeeva, Bibigul Nauyryzova, Shyngys Nugumarov

    The study aims to improve the efficiency of oil field development at the Kalamkas field through the implementation of new methods for analyzing hydrodynamic survey data and monitoring well conditions. It is hypothesized that the use of integrated geophysical and hydrodynamic methods will enhance forecasting accuracy, optimize field operations, and increase the hydrocarbon recovery factor. An integrated approach combining pulsed neutron logging (PNL), acoustic cementometry (AC), inflow and injectivity profile evaluation methods, and specialized software for advanced data interpretation was applied, significantly improving the accuracy of well condition analysis. The analysis enabled the identification of oil and gas saturation intervals, zones of increased water cut, and cementing defects in casing, and allowed for a quantitative assessment of reservoir permeability dynamics. Hydraulic fracturing application resulted in a 10–15% increase in permeability in certain zones, with an average oil recovery factor increase of 5%. Analysis of PNL data demonstrated the transition of oil-saturated reservoirs to water saturation during development, confirmed by geophysical and pressure build-up survey results. The study identified the primary causes of increased water cut and key factors leading to production rate decline. Proposed measures for optimizing operating modes and well grid efficiency contribute to improving existing field management practices.


  • Selection of drilling fluids and the regulation of their density

    by Yessenov University, A.O. Zhailiev, A.A. Seidaliev, A.E. Kuttybaev, Satbayev University, A.G. Gusmanova, B.T. Ratov, M.T. Tabylganov

    In the process of drilling oil and gas wells, the selection and design of drilling fluids play a key role in ensuring the stability and safety of the drilling process. Drilling fluids should ensure wellbore stability, effective cuttings removal and prevention of various complications, such as collapses, mud absorption, gas, oil and water shows and other geotechnical problems. The article dis-cusses in detail the basic principles of selecting drilling fluids, as well as their composition and physicochemical properties, which can vary depending on geological conditions, such as porosity and permeability of rocks, pressure and temperature in the drilling zone. Particular attention is paid to regulating the density of the solution, which is important for preventing destruction and maintaining borehole stability. Also discussed are wellbore flushing methods that allow for effective cleaning of the walls from cuttings, increasing productivity and reducing the risk of contamination. The article also analyzes various ways to prevent complications, such as absorption of the solution in porous rocks, which can significantly increase drilling costs. Examples are given of the use of special additives and modifiers that help improve the properties of the solution, increasing its stability and preventing problems associated with reactions with rocks. Special attention is paid to modern modifications of drilling fluids that have improved properties and function effectively under high temperatures and pressures typical of complex geological situations. Prospects for their future use and possible innovations in this area are considered, which opens up new opportunities for improving the safety and cost-effectiveness of drilling operations.

  • INVESTIGATION OF THE WORK OF THE MP-1 SAMPLER TO DETERMINE THE INDICATORS OF BOREHOLE PRODUCTION AT THE KARAZHANBAS FIELD

    by Sh. Yessenov Caspian State University of Technologies and Engineering, R.Y. Bayamirova, Z.T. Yerzhanova, Zhangir Khan West Kazakhstan Agrarian Technical University, A.R. Togasheva, Sarbopeyeva, D.S. Saduakasov, M.T. Tabylganov, A.T. Zholbasarova

    As part of the implementation of a comprehensive development project, new impact technologies were created and introduced initially at the experimental sites in order to increase the efficiency of hot water injection to maintain reservoir pressure and reservoir temperature, intensify the development process, increase the current and final ORC: stepwise thermal flooding (STF), figured flooding (FF), separate development of low-yield (refineries) and highly productive (HPZ) zones. The introduction of these technologies at the field contributed to an increase in the coverage of the process of displacement of poorly drained oil reserves, stabilization of oil withdrawals and provided additional oil production, which takes into account the efficiency of hot water injection. The upcoming geological, technological and production works of many oil fields depend on the results of water samples from the wellhead with the flow rate of the extracted liquid. Therefore, determining the exact percentage of water in the production of wells is one of the main goals. Poor quality of well testing data may not be better than their complete absence, especially for specialists in field development planning or production management. The article considers a diverse sampler, describes its role as an addition to multiphase flowmeters, which allows to obtain fluid samples without traditional separators.

  • ANALYSIS OF THE EFFECTIVENESS OF POLYMER SOLUTION INJECTION AT THE "WEST" SECTION OF THE KALAMKAS FIELD

    by Sh. Yessenov Caspian State University of Technologies and Engineering, A.T. Zholbasarova, O.G. Khayitov, TASHKENT STATE TECHNICAL UNIVERSITY NAMED AFTER I. KARIMOV, R.Y. Bayamirova, Sarbopeyeva, M.T. Tabylganov, D.S. Saduakasov, A.R. Togasheva

    This article presents an analysis of the effectiveness of polymer flooding technology at the Zapad site. The main purpose of the study was to evaluate the effect of injection of a polymer solution on increasing the oil recovery coefficient (ORC) and reducing the water content of products. During the experiment, a polymer solution based on polyacrylamide was used, which was injected into a formation with low permeability. To assess the effectiveness, changes in the flow rate of liquid, oil and water were monitored, as well as an analysis of pressure dynamics in wells. The results of the study showed that the injection of a polymer solution made it possible to significantly increase the oil recovery of the reservoir, increasing the ORC by 3.8% compared with traditional flooding methods. It was also revealed a decrease in the water content of products by 9.3% due to an improvement in the distribution of fluid flows in the reservoir. These results confirm the expediency of using polymer flooding to increase the efficiency of mining in areas with similar geological and physical conditions. The conducted research can serve as a basis for optimizing field development schemes and the introduction of new technologies to enhance oil recovery at other facilities.