Jean-Michel Tucny
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jean-Michel Tucny has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
François Bertrand
Research Center in Industrial Flow Processes (URPEI), Polytechnique Montréal
4 shared publications- Adriano Tiribocchi
Istituto per le Applicazioni del Calcolo, Consiglio Nazionale delle Ricerche - via dei Taurini 19, 00185 Roma, Italy
3 shared publications Andrea Montessori
3 shared publications- Andrea Montessori
Roma Tre University
3 shared publications - Marco Lauricella
Istituto per le Applicazioni del Calcolo, Consiglio Nazionale delle Ricerche, Rome, Italy
3 shared publications Mihir Durve
3 shared publications
Latest Publications
- 22 December 2025
- Published by Taylor & Francis in Aerosol Science and Technology
- Vol. 60 (5) , 450-468
Slip flow and shadowing effects in multilayered fibrous filter media
- 22 December 2025
- Published by Taylor & Francis in Aerosol Science and Technology
- Vol. 60 (5) , 450-468
Slip flow and shadowing effects in multilayered fibrous filter media
- 20 March 2025
- Published by Elsevier in Journal of Computational Science
- Vol. 87
Physics-informed neural networks for microflows: Rarefied gas dynamics in cylinder arrays
- 20 March 2025
- Published by Elsevier in Journal of Computational Science
- Vol. 87
Physics-informed neural networks for microflows: Rarefied gas dynamics in cylinder arrays
- 1 February 2025
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 63 (2) , 806-810
Droplet Shape Representation Using Fourier Series and Autoencoders
The shape of liquid droplets in air plays an important role in the aerodynamic behavior and combustion dynamics of miniaturized propulsion systems such as microsatellites and small drones. Their precise manipulation can yield optimal efficiency in such systems. It is desired to have a minimal representation of droplet shapes using as few parameters as possible to automate shape manipulation using self-learning algorithms, such as reinforcement learning. In this paper, we use a neural compression algorithm to represent, with only two parameters, elliptical and bullet-shaped droplets initially represented with 200 points (400 real numbers) at the droplet boundary. The mapping of many to two points is achieved in two stages. Initially, a Fourier series is formulated to approximate the contour of the droplet. Subsequently, the coefficients of this Fourier series are condensed to lower dimensions utilizing a neural network with a bottleneck architecture. Finally, 5000 synthetically generated droplet shapes were used to train the neural network. With a two-real-number representation, the recovered droplet shapes had excellent overlap with the original ones, with a mean square error of [ ]. Hence, this method compresses the droplet contour to merely two numerical parameters via a fully reversible process, a crucial feature for rendering learning algorithms computationally tractable.
- 1 February 2025
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 63 (2) , 806-810
Droplet Shape Representation Using Fourier Series and Autoencoders
The shape of liquid droplets in air plays an important role in the aerodynamic behavior and combustion dynamics of miniaturized propulsion systems such as microsatellites and small drones. Their precise manipulation can yield optimal efficiency in such systems. It is desired to have a minimal representation of droplet shapes using as few parameters as possible to automate shape manipulation using self-learning algorithms, such as reinforcement learning. In this paper, we use a neural compression algorithm to represent, with only two parameters, elliptical and bullet-shaped droplets initially represented with 200 points (400 real numbers) at the droplet boundary. The mapping of many to two points is achieved in two stages. Initially, a Fourier series is formulated to approximate the contour of the droplet. Subsequently, the coefficients of this Fourier series are condensed to lower dimensions utilizing a neural network with a bottleneck architecture. Finally, 5000 synthetically generated droplet shapes were used to train the neural network. With a two-real-number representation, the recovered droplet shapes had excellent overlap with the original ones, with a mean square error of [ ]. Hence, this method compresses the droplet contour to merely two numerical parameters via a fully reversible process, a crucial feature for rendering learning algorithms computationally tractable.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
Minimal droplet shape representation in experimental microfluidics using Fourier series and autoencoders
We introduce a two-step, fully reversible process designed to project the outer shape of a generic droplet onto a lower-dimensional space. The initial step involves representing the droplet's shape as a Fourier series. Subsequently, the Fourier coefficients are reduced to lower-dimensional vectors by using autoencoder models. The exploitation of the domain knowledge of the droplet shapes allows us to map generic droplet shapes to just two-dimensional (2D) space in contrast to previous direct methods involving autoencoders that could map it on minimum eight-dimensional (8D) space. This six-dimensional (6D) reduction in the dimensionality of the droplet's description opens new possibilities for applications, such as automated droplet generation via reinforcement learning, the analysis of droplet shape evolution dynamics, and the prediction of droplet breakup. Our findings underscore the benefits of incorporating domain knowledge into autoencoder models, highlighting the potential for increased accuracy in various other scientific disciplines.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
Minimal droplet shape representation in experimental microfluidics using Fourier series and autoencoders
We introduce a two-step, fully reversible process designed to project the outer shape of a generic droplet onto a lower-dimensional space. The initial step involves representing the droplet's shape as a Fourier series. Subsequently, the Fourier coefficients are reduced to lower-dimensional vectors by using autoencoder models. The exploitation of the domain knowledge of the droplet shapes allows us to map generic droplet shapes to just two-dimensional (2D) space in contrast to previous direct methods involving autoencoders that could map it on minimum eight-dimensional (8D) space. This six-dimensional (6D) reduction in the dimensionality of the droplet's description opens new possibilities for applications, such as automated droplet generation via reinforcement learning, the analysis of droplet shape evolution dynamics, and the prediction of droplet breakup. Our findings underscore the benefits of incorporating domain knowledge into autoencoder models, highlighting the potential for increased accuracy in various other scientific disciplines.
- Open Access
Lattice Boltzmann Model for Rarefied Gaseous Mixture Flows in Three-Dimensional Porous Media Including Knudsen Diffusion
Numerical modeling of gas flows in rarefied regimes is crucial in understanding fluid behavior in microscale applications. Rarefied regimes are characterized by a decrease in molecular collisions, and they lead to unusual phenomena such as gas phase separation, which is not acknowledged in hydrodynamic equations. In this work, numerical investigation of miscible gaseous mixtures in the rarefied regime is performed using a modified lattice Boltzmann model. Slip boundary conditions are adapted to arbitrary geometries. A ray-tracing algorithm-based wall function is implemented to model the non-equilibrium effects in the transition flow regime. The molecular free flow defined by the Knudsen diffusion coefficient is integrated through an effective and asymmetrical binary diffusion coefficient. The numerical model is validated with mass flow measurements through microchannels of different cross-section shapes from the near-continuum to the transition regimes, and gas phase separation is studied within a staggered arrangement of spheres. The influence of porosity and mixture composition on the gas separation effect are analyzed. Numerical results highlight the increase in the degree of gas phase separation with the rarefaction rate and the molecular mass ratio. The various simulations also indicate that geometrical features in porous media have a greater impact on gaseous mixtures’ effective permeability at highly rarefied regimes. Finally, a permeability enhancement factor based on the lightest species of the gaseous mixture is derived.
Open AccessLattice Boltzmann Model for Rarefied Gaseous Mixture Flows in Three-Dimensional Porous Media Including Knudsen Diffusion
Numerical modeling of gas flows in rarefied regimes is crucial in understanding fluid behavior in microscale applications. Rarefied regimes are characterized by a decrease in molecular collisions, and they lead to unusual phenomena such as gas phase separation, which is not acknowledged in hydrodynamic equations. In this work, numerical investigation of miscible gaseous mixtures in the rarefied regime is performed using a modified lattice Boltzmann model. Slip boundary conditions are adapted to arbitrary geometries. A ray-tracing algorithm-based wall function is implemented to model the non-equilibrium effects in the transition flow regime. The molecular free flow defined by the Knudsen diffusion coefficient is integrated through an effective and asymmetrical binary diffusion coefficient. The numerical model is validated with mass flow measurements through microchannels of different cross-section shapes from the near-continuum to the transition regimes, and gas phase separation is studied within a staggered arrangement of spheres. The influence of porosity and mixture composition on the gas separation effect are analyzed. Numerical results highlight the increase in the degree of gas phase separation with the rarefaction rate and the molecular mass ratio. The various simulations also indicate that geometrical features in porous media have a greater impact on gaseous mixtures’ effective permeability at highly rarefied regimes. Finally, a permeability enhancement factor based on the lightest species of the gaseous mixture is derived.
- 27 May 2024
- Published by Taylor & Francis in International Journal of Computational Fluid Dynamics
- Vol. 38 (5) , 395-412
On the Invalidity of the Extended Navier-Stokes Equations to Compute Rarefied Gas Flows in a Cylinder Array
- 27 May 2024
- Published by Taylor & Francis in International Journal of Computational Fluid Dynamics
- Vol. 38 (5) , 395-412
On the Invalidity of the Extended Navier-Stokes Equations to Compute Rarefied Gas Flows in a Cylinder Array
- Open Access
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Measuring arrangement and size distributions of flowing droplets in microchannels through deep learning using DropTrack
In microfluidic systems, droplets undergo intricate deformations as they traverse flow-focusing junctions, posing a challenging task for accurate measurement, especially during short transit times. This study investigates the physical behavior of droplets within dense emulsions in diverse microchannel geometries, specifically focusing on the impact of varying opening angles within the primary channel and injection rates of fluid components. Employing a sophisticated droplet tracking tool based on deep-learning techniques, we analyze multiple frames from flow-focusing experiments to quantitatively characterize droplet deformation in terms of ratio between maximum width and height and propensity to form liquid with hexagonal spatial arrangement. Our findings reveal the existence of an optimal opening angle where shape deformations are minimal and hexagonal arrangement is maximal. Variations of fluid injection rates are also found to affect size and packing fraction of the emulsion in the exit channel. This paper offers insight into deformations, size, and structure of fluid emulsions relative to microchannel geometry and other flow-related parameters captured through machine learning, with potential implications for the design of microchips utilized in cellular transport and tissue engineering applications.
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Open AccessMeasuring arrangement and size distributions of flowing droplets in microchannels through deep learning using DropTrack
In microfluidic systems, droplets undergo intricate deformations as they traverse flow-focusing junctions, posing a challenging task for accurate measurement, especially during short transit times. This study investigates the physical behavior of droplets within dense emulsions in diverse microchannel geometries, specifically focusing on the impact of varying opening angles within the primary channel and injection rates of fluid components. Employing a sophisticated droplet tracking tool based on deep-learning techniques, we analyze multiple frames from flow-focusing experiments to quantitatively characterize droplet deformation in terms of ratio between maximum width and height and propensity to form liquid with hexagonal spatial arrangement. Our findings reveal the existence of an optimal opening angle where shape deformations are minimal and hexagonal arrangement is maximal. Variations of fluid injection rates are also found to affect size and packing fraction of the emulsion in the exit channel. This paper offers insight into deformations, size, and structure of fluid emulsions relative to microchannel geometry and other flow-related parameters captured through machine learning, with potential implications for the design of microchips utilized in cellular transport and tissue engineering applications.
- 9 November 2023
- Published by Elsevier in Computers & Fluids
- Vol. 269
Learning of viscosity functions in rarefied gas flows with physics-informed neural networks
- 9 November 2023
- Published by Elsevier in Computers & Fluids
- Vol. 269
Learning of viscosity functions in rarefied gas flows with physics-informed neural networks
- 21 September 2023
- Published by Springer Nature in International Journal of Applied and Computational Mathematics
- Vol. 9 (5) , 1-21
Computation of Effective Viscosities for Rarefied Gas Flows Using Ray-Tracing
- 21 September 2023
- Published by Springer Nature in International Journal of Applied and Computational Mathematics
- Vol. 9 (5) , 1-21
Computation of Effective Viscosities for Rarefied Gas Flows Using Ray-Tracing
- Open Access
Learning of viscosity functions in rarefied gas flows with physics-informed neural networks
The prediction non-equilibrium transport phenomena in disordered media is a difficult problem for conventional numerical methods. An example of a challenging problem is the prediction of gas flow fields through porous media in the rarefied regime, where resolving the six-dimensional Boltzmann equation or its numerical approximations is computationally too demanding. Physics-informed neural networks (PINNs) have been recently proposed as an alternative to conventional numerical methods, but remain very close to the Boltzmann equation in terms of mathematical formulation. Furthermore, there has been no systematic study of neural network designs on the performance of PINNs. In this work, PINNs are employed to predict the velocity field of a rarefied gas flow in a slit at increasing Knudsen numbers according to a generalized Stokes phenomenological model using an effective viscosity function. We found that activation functions with limited smoothness result in orders of magnitude larger errors than infinitely differentiable functions and that the AdamW is by far the best optimizer for this inverse problem. The design was found to be robust from Knudsen numbers ranging from 0.1 to 10. Our findings stand as a first step towards the use of PINNs to investigate the dynamics of non-equilibrium flows in complex geometries.
Open AccessLearning of viscosity functions in rarefied gas flows with physics-informed neural networks
The prediction non-equilibrium transport phenomena in disordered media is a difficult problem for conventional numerical methods. An example of a challenging problem is the prediction of gas flow fields through porous media in the rarefied regime, where resolving the six-dimensional Boltzmann equation or its numerical approximations is computationally too demanding. Physics-informed neural networks (PINNs) have been recently proposed as an alternative to conventional numerical methods, but remain very close to the Boltzmann equation in terms of mathematical formulation. Furthermore, there has been no systematic study of neural network designs on the performance of PINNs. In this work, PINNs are employed to predict the velocity field of a rarefied gas flow in a slit at increasing Knudsen numbers according to a generalized Stokes phenomenological model using an effective viscosity function. We found that activation functions with limited smoothness result in orders of magnitude larger errors than infinitely differentiable functions and that the AdamW is by far the best optimizer for this inverse problem. The design was found to be robust from Knudsen numbers ranging from 0.1 to 10. Our findings stand as a first step towards the use of PINNs to investigate the dynamics of non-equilibrium flows in complex geometries.