Naini Jain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Naini Jain has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Jakub Holovský
Centre for Advanced Photovoltaics, Faculty of Electrical Engineering, Czech Technical University in Prague, Technická 2, 166 27 Prague, Czech Republic
4 shared publications - Amalraj Peter Amalathas
Department of Physics, Faculty of Science
2 shared publications - Bohuslav Rezek
Faculty of Electrical Engineering Czech Technical University in Prague Prague Czechia
2 shared publications - Jaroslav Kuliček
Faculty of Electrical Engineering Czech Technical University in Prague Technická 2 16627 Prague Czechia
2 shared publications - Kristina Vlášková
SOL‐MAT Lab Faculty of Electrical Engineering Czech Technical University in Prague Prague Czech Republic
2 shared publications - Lukáš Horák
Charles University
2 shared publications
Latest Publications
- Open Access
- 23 October 2026
- Published by Wiley in Nanophotonics
- Vol. 15 (20) , e70330
Lithium Thiostannate Spinel Thin Films as Potential Photovoltaic Absorbers
Quaternary lithium thiostannate spinels represent a promising class of non‐toxic earth‐abundant semiconductor absorbers for photovoltaic applications, reported to be air‐stable in bulk form. To the best of our knowledge, no attempts to prepare their thin films and evaluate their photoresponse have been reported. Here, we demonstrate the first successful deposition of nanocrystalline Li 1.66 CuSn 3.33 S 8 spinel films (∼350 nm thickness) via pulsed laser deposition (PLD). We observe that the crystal structure of the PLD target governs the structure and optoelectronic properties of the resulting film. A phase‐pure spinel target yields a homogeneous layer with a high degree of crystallinity, strong optical absorptance with a clear absorption edge at ∼1.5 eV and low sub‐bandgap values, as determined by photothermal deflection spectroscopy. The photoluminescence peak centred at 836 nm, consistent with the absorption band edge, together with measurable photoconductivity, confirms semiconducting character. Therefore, we identify the PLD‐deposited Li 1.66 CuSn 3.33 S 8 films as a candidate for a photo‐absorber material, while noting that further improvements in film crystallinity, sulphur stoichiometry and Urbach energy are required before photovoltaic device integration can be assessed.
- 23 October 2026
- Published by Wiley in Nanophotonics
- Vol. 15 (20) , e70330
Open AccessLithium Thiostannate Spinel Thin Films as Potential Photovoltaic Absorbers
Quaternary lithium thiostannate spinels represent a promising class of non‐toxic earth‐abundant semiconductor absorbers for photovoltaic applications, reported to be air‐stable in bulk form. To the best of our knowledge, no attempts to prepare their thin films and evaluate their photoresponse have been reported. Here, we demonstrate the first successful deposition of nanocrystalline Li 1.66 CuSn 3.33 S 8 spinel films (∼350 nm thickness) via pulsed laser deposition (PLD). We observe that the crystal structure of the PLD target governs the structure and optoelectronic properties of the resulting film. A phase‐pure spinel target yields a homogeneous layer with a high degree of crystallinity, strong optical absorptance with a clear absorption edge at ∼1.5 eV and low sub‐bandgap values, as determined by photothermal deflection spectroscopy. The photoluminescence peak centred at 836 nm, consistent with the absorption band edge, together with measurable photoconductivity, confirms semiconducting character. Therefore, we identify the PLD‐deposited Li 1.66 CuSn 3.33 S 8 films as a candidate for a photo‐absorber material, while noting that further improvements in film crystallinity, sulphur stoichiometry and Urbach energy are required before photovoltaic device integration can be assessed.
- Open Access
- 25 June 2026
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 38 (25) , 255703
Crystallinity and optical properties of Cu 2 FeSn 3 S 8 thin films prepared by pulsed laser deposition
The rapid development of tandem photovoltaics is propelled by advances in the halide perovskite top cells. However, their widespread industrial implementation is hindered by practical challenges, such as material scarcity, toxicity, and limited chemical and structural instability. In this context, certain poly-chalcogenide compounds have emerged as potential alternatives, comprising abundant, non-toxic elements and exhibiting overall higher stability. Here, we report the synthesis and characterization of quaternary chalcogenide Cu 2 FeSn 3 S 8 thin films prepared by pulsed laser deposition on soda-lime glass substrates, followed by post-deposition annealing. X-ray diffraction (XRD) and Raman spectroscopy demonstrate that post-deposition annealing at 400 °C for 1 h in N 2 atmosphere triggers conversion of as-deposited amorphous films into partially crystalline films described by thiospinel structure ( Fd 3 ¯ m space group) within a micron-size vicinity confirmed by Raman mapping. Notably, as confirmed by EDS compositional analysis and XRD Rietveld refinement, the cubic thiospinel phase remains stable within a range of Cu/Fe/Sn molar ratios, achieved by varying the target composition, accompanied by a corresponding shift in the lattice parameter a. The optoelectronic measurements revealed a finite carrier mobility, photosensitivity, and the optical bandgap within the range of 1.46–1.52 eV, along with enhanced optical absorption coefficient upon annealing. These results highlight Cu 2 FeSn 3 S 8 as a promising, non-toxic, abundant, and efficient candidate for absorbers in solar cell applications.
- 25 June 2026
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 38 (25) , 255703
Open AccessCrystallinity and optical properties of Cu 2 FeSn 3 S 8 thin films prepared by pulsed laser deposition
The rapid development of tandem photovoltaics is propelled by advances in the halide perovskite top cells. However, their widespread industrial implementation is hindered by practical challenges, such as material scarcity, toxicity, and limited chemical and structural instability. In this context, certain poly-chalcogenide compounds have emerged as potential alternatives, comprising abundant, non-toxic elements and exhibiting overall higher stability. Here, we report the synthesis and characterization of quaternary chalcogenide Cu 2 FeSn 3 S 8 thin films prepared by pulsed laser deposition on soda-lime glass substrates, followed by post-deposition annealing. X-ray diffraction (XRD) and Raman spectroscopy demonstrate that post-deposition annealing at 400 °C for 1 h in N 2 atmosphere triggers conversion of as-deposited amorphous films into partially crystalline films described by thiospinel structure ( Fd 3 ¯ m space group) within a micron-size vicinity confirmed by Raman mapping. Notably, as confirmed by EDS compositional analysis and XRD Rietveld refinement, the cubic thiospinel phase remains stable within a range of Cu/Fe/Sn molar ratios, achieved by varying the target composition, accompanied by a corresponding shift in the lattice parameter a. The optoelectronic measurements revealed a finite carrier mobility, photosensitivity, and the optical bandgap within the range of 1.46–1.52 eV, along with enhanced optical absorption coefficient upon annealing. These results highlight Cu 2 FeSn 3 S 8 as a promising, non-toxic, abundant, and efficient candidate for absorbers in solar cell applications.
- Open Access
- 1 November 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (11) , 115910
Optical, electrical and surface properties of bare and Al-doped nanocrystalline ZnO (AZO) thin films grown by pulsed laser deposition (PLD) on commercial interdigital electrodes (IDE)
Zinc oxide (ZnO) is a low-cost, environmentally friendly material with unique optical properties and a wide variety of nano- and microstructures, making it attractive for applications in energy conversion, scintillators, photocatalytic wastewater treatment, electrochemical energy storage, and sensing. In this work, nominally undoped and Al-doped nanocrystalline ZnO (AZO) thin films were deposited by pulsed laser deposition (PLD) on commercial gold-based interdigitated electrodes (IDE) on glass substrates. Surface morphology and structure were characterized using Correlative Probe and Electron Microscopy (CPEM), combining Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) to perform spatially correlated measurements. Longer deposition resulted in the growth of larger crystals and thicker ZnO layers, while Al doping only slightly affected grain size and reduced growth rate. Optical and optoelectronic properties were investigated by photothermal deflection (PDS) and photocurrent spectroscopy (PCS). The mobility edge was found to lie approximately 0.3 eV below the band gap. Space-charge-limited currents were observed at low voltages. Persistent photoconductivity indicates potential issues with charge transport.
- 1 November 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (11) , 115910
Open AccessOptical, electrical and surface properties of bare and Al-doped nanocrystalline ZnO (AZO) thin films grown by pulsed laser deposition (PLD) on commercial interdigital electrodes (IDE)
Zinc oxide (ZnO) is a low-cost, environmentally friendly material with unique optical properties and a wide variety of nano- and microstructures, making it attractive for applications in energy conversion, scintillators, photocatalytic wastewater treatment, electrochemical energy storage, and sensing. In this work, nominally undoped and Al-doped nanocrystalline ZnO (AZO) thin films were deposited by pulsed laser deposition (PLD) on commercial gold-based interdigitated electrodes (IDE) on glass substrates. Surface morphology and structure were characterized using Correlative Probe and Electron Microscopy (CPEM), combining Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) to perform spatially correlated measurements. Longer deposition resulted in the growth of larger crystals and thicker ZnO layers, while Al doping only slightly affected grain size and reduced growth rate. Optical and optoelectronic properties were investigated by photothermal deflection (PDS) and photocurrent spectroscopy (PCS). The mobility edge was found to lie approximately 0.3 eV below the band gap. Space-charge-limited currents were observed at low voltages. Persistent photoconductivity indicates potential issues with charge transport.
- 22 November 2023
- Published by Elsevier in Solar Energy
- Vol. 266
Enhanced efficiency and stability of electron transport layer in perovskite tandem solar cells: Challenges and future perspectives
- 22 November 2023
- Published by Elsevier in Solar Energy
- Vol. 266
Enhanced efficiency and stability of electron transport layer in perovskite tandem solar cells: Challenges and future perspectives