Jinchao Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jinchao Pan has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
Rongqiao Wang
School of Energy and Power Engineering Beihang University Beijing China
16 shared publicationsDianyin Hu
Research Institute of Aero‐Engine Beihang University Beijing China
15 shared publicationsJinquan Deng
5 shared publications- Xi Liu
School of Energy and Power Engineering Beihang University Beijing China
5 shared publications Guican Wang
4 shared publications- Penghui Ma
School of Energy and Power Engineering, Beihang University
4 shared publications
Latest Publications
- 13 November 2026
- Published by Wiley in Polymer Composites
Interlaminar Shear Non‐Linearity and Compression‐Shear Delamination in Composite Fan‐Blade Tenon Structures
Composite fan blades are subjected to interlaminar failure risks under complex service loads, and reliable prediction of damage evolution is essential for structural safety assessment. This study investigated the interlaminar shear failure behavior of resin‐matrix composites and its relevance to composite fan‐blade tenon structures. Multi‐stage short‐beam shear (SBS) tests, digital image correlation (DIC), and microscopic observation were used to relate the non‐linear load–displacement response to the initiation and propagation of interlaminar delamination. To represent the residual load‐bearing capacity after delamination, a non‐linear cohesive constitutive model incorporating the through‐thickness compression (TTC) effect was developed. In SBS simulations, the model reproduced the linear elastic, non‐linear, and sub‐linear response stages, with displacement‐field errors limited to 3.4% relative to DIC measurements. The model was further applied to tensile failure analysis of a full‐scale composite tenon structure. The predicted progressive delamination loads differed from the experimental values by less than 3%, and the simulated failure locations matched the observed machined/cushion‐layer and main‐ply delamination sites. These results support the use of the proposed Cohesive‐TTC model for delamination assessment of composite structures under coupled compression‐shear loading.
- 13 November 2026
- Published by Wiley in Polymer Composites
Interlaminar Shear Non‐Linearity and Compression‐Shear Delamination in Composite Fan‐Blade Tenon Structures
Composite fan blades are subjected to interlaminar failure risks under complex service loads, and reliable prediction of damage evolution is essential for structural safety assessment. This study investigated the interlaminar shear failure behavior of resin‐matrix composites and its relevance to composite fan‐blade tenon structures. Multi‐stage short‐beam shear (SBS) tests, digital image correlation (DIC), and microscopic observation were used to relate the non‐linear load–displacement response to the initiation and propagation of interlaminar delamination. To represent the residual load‐bearing capacity after delamination, a non‐linear cohesive constitutive model incorporating the through‐thickness compression (TTC) effect was developed. In SBS simulations, the model reproduced the linear elastic, non‐linear, and sub‐linear response stages, with displacement‐field errors limited to 3.4% relative to DIC measurements. The model was further applied to tensile failure analysis of a full‐scale composite tenon structure. The predicted progressive delamination loads differed from the experimental values by less than 3%, and the simulated failure locations matched the observed machined/cushion‐layer and main‐ply delamination sites. These results support the use of the proposed Cohesive‐TTC model for delamination assessment of composite structures under coupled compression‐shear loading.
- 15 September 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (22) , 20820-20836
A Multifeature Acoustic Emission Approach Integrating Delamination Damage Function for Quantitative Damage Monitoring in Composite Fan Blade Tenons
Acoustic emission (AE) can monitor damage in composite structures in real time, but its use in complex aerospace components remains limited by overlapping signal sources, test‐condition sensitivity, and weak coupling with mechanical response. This study develops a delamination‐oriented AE framework that combines multifeature signal processing with a delamination damage function (DDF). Short‐beam shear tests were used to build a laminate‐specific AE database. AE events were partitioned into four clusters by principal component analysis and fuzzy C‐means clustering, and the resulting peak‐frequency bands were checked by interrupted tests and ultra‐depth‐of‐field 3D optical microscopy and scanning electron microscopy (SEM). These frequency bands and cluster‐mode associations are specific to the investigated laminate and AE acquisition setup, and they require recalibration for other material systems or stacking sequences. A transient damage contribution index was then combined with mechanical energy release to construct the DDF, producing temporally localized responses to delamination‐related AE activity. The framework was evaluated in tensile tests of full‐scale composite fan blade tenons with synchronized AE and digital image correlation (DIC). Using the SBS‐derived frequency characteristics as prior information, the DDF highlighted delamination‐dominated events whose timing agreed with DIC‐observed delamination onset and progression.
- 15 September 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (22) , 20820-20836
A Multifeature Acoustic Emission Approach Integrating Delamination Damage Function for Quantitative Damage Monitoring in Composite Fan Blade Tenons
Acoustic emission (AE) can monitor damage in composite structures in real time, but its use in complex aerospace components remains limited by overlapping signal sources, test‐condition sensitivity, and weak coupling with mechanical response. This study develops a delamination‐oriented AE framework that combines multifeature signal processing with a delamination damage function (DDF). Short‐beam shear tests were used to build a laminate‐specific AE database. AE events were partitioned into four clusters by principal component analysis and fuzzy C‐means clustering, and the resulting peak‐frequency bands were checked by interrupted tests and ultra‐depth‐of‐field 3D optical microscopy and scanning electron microscopy (SEM). These frequency bands and cluster‐mode associations are specific to the investigated laminate and AE acquisition setup, and they require recalibration for other material systems or stacking sequences. A transient damage contribution index was then combined with mechanical energy release to construct the DDF, producing temporally localized responses to delamination‐related AE activity. The framework was evaluated in tensile tests of full‐scale composite fan blade tenons with synchronized AE and digital image correlation (DIC). Using the SBS‐derived frequency characteristics as prior information, the DDF highlighted delamination‐dominated events whose timing agreed with DIC‐observed delamination onset and progression.
- 28 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (17) , 15325-15337
Automated Segmentation of Manufacturing Defects in 3D ‐Printed Composite Materials Using an Optimized Deep Learning Approach
Precise segmentation of internal defects in composite materials is a crucial foundation to analyze their mechanical properties based on characterization. Because 3D printed composite materials have numerous and irregularly distributed voids, conventional segmentation methods suffer from drawbacks such as being time‐consuming or having low accuracy. This study proposes CAMPS‐UNet, a novel lightweight segmentation network for identifying voids in x‐ray computed tomography (X‐CT) images of 3D printed carbon fiber reinforced polymers (CFRPs). Built on a Vision Mamba UNet backbone, CAMPS‐UNet integrates Coordinate Attention (CA), multiscale Atrous Spatial Pyramid Pooling (ASPP), and a SegFix boundary refinement module. This structure jointly captures long‐range dependencies, multiscale context, and fine boundary details, enabling precise and efficient void segmentation. Ablation studies confirm that every module contributes to improving segmentation accuracy. CAMPS‐UNet consistently outperforms conventional architectures, achieving superior results across standard segmentation metrics: the highest Dice coefficient and MIoU. In 3D reconstruction, CAMPS‐UNet enables reliable quantification of the voids volume fraction, together with the corresponding size and shape distributions. Furthermore, CAMPS‐UNet demonstrates robust generalization capability, highlighting its effectiveness across different imaging conditions.
- 28 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (17) , 15325-15337
Automated Segmentation of Manufacturing Defects in 3D ‐Printed Composite Materials Using an Optimized Deep Learning Approach
Precise segmentation of internal defects in composite materials is a crucial foundation to analyze their mechanical properties based on characterization. Because 3D printed composite materials have numerous and irregularly distributed voids, conventional segmentation methods suffer from drawbacks such as being time‐consuming or having low accuracy. This study proposes CAMPS‐UNet, a novel lightweight segmentation network for identifying voids in x‐ray computed tomography (X‐CT) images of 3D printed carbon fiber reinforced polymers (CFRPs). Built on a Vision Mamba UNet backbone, CAMPS‐UNet integrates Coordinate Attention (CA), multiscale Atrous Spatial Pyramid Pooling (ASPP), and a SegFix boundary refinement module. This structure jointly captures long‐range dependencies, multiscale context, and fine boundary details, enabling precise and efficient void segmentation. Ablation studies confirm that every module contributes to improving segmentation accuracy. CAMPS‐UNet consistently outperforms conventional architectures, achieving superior results across standard segmentation metrics: the highest Dice coefficient and MIoU. In 3D reconstruction, CAMPS‐UNet enables reliable quantification of the voids volume fraction, together with the corresponding size and shape distributions. Furthermore, CAMPS‐UNet demonstrates robust generalization capability, highlighting its effectiveness across different imaging conditions.
- Open Access
- 2 February 2026
- Published by Elsevier in SSRN Electronic Journal
Thermo-mechanical topology optimization of turbine disk with self-supporting enclosed voids
Thermally driven topology optimization of turbine disks can result in the formation of enclosed voids, which contribute to thermal insulation and stress mitigation. However, such thermally induced voids may contain unsupported overhang interfaces, giving rise to critical manufacturability challenges in metal additive manufacturing. To resolve this issue, a thermo-mechanically coupled topology optimization framework is proposed that explicitly incorporates self-support constraints for enclosed voids. An overhang interface identification strategy is developed by integrating connected-component analysis for enclosed void detection with a Smallest Univalue Segment Assimilating Nucleus (SUSAN) method for overhang surface recognition, allowing accurate localization of unsupported internal interfaces without resorting to virtual thermal analyses. The associated sensitivity formulations are derived and efficiently embedded into the optimization scheme. A cantilever beam example is presented to validate the effectiveness of the proposed self-support strategy. Subsequently, a thermally loaded axisymmetric turbine disk example demonstrates that the proposed method produces self-supporting enclosed voids while maintaining thermal insulation capability and structural stiffness. Compared with conventional global overhang-constrained approaches, the proposed framework provides improved thermo-mechanical performance and enhanced manufacturability.
- 2 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessThermo-mechanical topology optimization of turbine disk with self-supporting enclosed voids
Thermally driven topology optimization of turbine disks can result in the formation of enclosed voids, which contribute to thermal insulation and stress mitigation. However, such thermally induced voids may contain unsupported overhang interfaces, giving rise to critical manufacturability challenges in metal additive manufacturing. To resolve this issue, a thermo-mechanically coupled topology optimization framework is proposed that explicitly incorporates self-support constraints for enclosed voids. An overhang interface identification strategy is developed by integrating connected-component analysis for enclosed void detection with a Smallest Univalue Segment Assimilating Nucleus (SUSAN) method for overhang surface recognition, allowing accurate localization of unsupported internal interfaces without resorting to virtual thermal analyses. The associated sensitivity formulations are derived and efficiently embedded into the optimization scheme. A cantilever beam example is presented to validate the effectiveness of the proposed self-support strategy. Subsequently, a thermally loaded axisymmetric turbine disk example demonstrates that the proposed method produces self-supporting enclosed voids while maintaining thermal insulation capability and structural stiffness. Compared with conventional global overhang-constrained approaches, the proposed framework provides improved thermo-mechanical performance and enhanced manufacturability.
- 30 December 2025
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 17 (4) , 805-832
System reliability-based topology optimization considering failure dependence based on D-vine copula model
Purpose: This study aims to develop a system reliability-based topology optimization framework for structural layout design problems involving multiple, dependent failure modes. The goal is to enhance structural safety while efficiently addressing the influence of failure dependence. Design/methodology/approach: A D-vine copula model is employed to characterize complex statistical dependencies among limit state functions. To overcome computational challenges arising from evolving topologies and nonlinear performance functions, a quantile-based decoupling strategy is proposed, along with an adaptive reliability allocation method. Findings: The proposed methodology is validated through two numerical examples: a planar bridge and a simplified turbine disk. Comparative studies are conducted among deterministic, component-level, system-level and independent reliability-based topology optimization formulations. Results demonstrate that accounting for failure dependence leads to more rational and safer designs. Neglecting such dependence can result in overly conservative or unsafe structural layouts. Originality/value: This work provides a novel system reliability-based design framework that integrates failure dependence modeling using D-vine copula model into topology optimization. Although limited to two representative case studies, the findings offer meaningful insights into the trade-offs among different RBTO strategies and emphasize the importance of capturing failure dependence in system-level reliability design.
- 30 December 2025
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 17 (4) , 805-832
System reliability-based topology optimization considering failure dependence based on D-vine copula model
Purpose: This study aims to develop a system reliability-based topology optimization framework for structural layout design problems involving multiple, dependent failure modes. The goal is to enhance structural safety while efficiently addressing the influence of failure dependence. Design/methodology/approach: A D-vine copula model is employed to characterize complex statistical dependencies among limit state functions. To overcome computational challenges arising from evolving topologies and nonlinear performance functions, a quantile-based decoupling strategy is proposed, along with an adaptive reliability allocation method. Findings: The proposed methodology is validated through two numerical examples: a planar bridge and a simplified turbine disk. Comparative studies are conducted among deterministic, component-level, system-level and independent reliability-based topology optimization formulations. Results demonstrate that accounting for failure dependence leads to more rational and safer designs. Neglecting such dependence can result in overly conservative or unsafe structural layouts. Originality/value: This work provides a novel system reliability-based design framework that integrates failure dependence modeling using D-vine copula model into topology optimization. Although limited to two representative case studies, the findings offer meaningful insights into the trade-offs among different RBTO strategies and emphasize the importance of capturing failure dependence in system-level reliability design.