Tomohiro Watanabe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Tomohiro Watanabe has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Kojiro Iizuka
Shibaura Institute of Technology
7 shared publications - Kazuhiko Hiramoto
Mechanical Engineering Program, Niigata University, 8050 Ikarashi 2-no-cho, Nishi-ku, Niigata 950-2181, Japan
3 shared publications Astro-H Sxi Team
2 shared publicationsDai Watanabe
2 shared publicationsH. Tsunemi
Osaka University, 1-1 Machikaneyama, Toyonaka, Osaka 560-0043, Japan
2 shared publications- Hideki Nakajima
Synchrotron Light Research Institute, Nakhon Ratchasima 30000, Thailand
2 shared publications
Latest Publications
- Open Access
Optimal Design of Ground-Penetrating Robotic Arms Using RFT-Based Ground Resistance Analysis
In recent years, robotic systems, including robotic arms, have been increasingly investigated for lunar and planetary exploration. Robotic arms are particularly important for tasks such as sample collection and subsurface exploration. Since the surfaces of the Moon and Mars are covered with soft granular materials, the design of robotic-arm link lengths that reduce energy consumption while considering ground reaction forces and required motions is important for ground penetration tasks. In this study, ground reaction forces acting on a robotic arm during ground penetration were estimated using Resistive Force Theory (RFT). Based on the estimated reaction forces and the force manipulability ellipsoid, an evaluation index R was introduced to evaluate the actuator load, and a method for determining energy-efficient link lengths was proposed. A two-link robotic arm with the link lengths determined by the proposed method was fabricated and experimentally evaluated. The experimental results showed that the link-length combinations determined by the proposed method exhibited the lowest RMS current for all tested trajectories, demonstrating the effectiveness of the proposed method for determining energy-efficient robotic-arm link lengths.
Open AccessOptimal Design of Ground-Penetrating Robotic Arms Using RFT-Based Ground Resistance Analysis
In recent years, robotic systems, including robotic arms, have been increasingly investigated for lunar and planetary exploration. Robotic arms are particularly important for tasks such as sample collection and subsurface exploration. Since the surfaces of the Moon and Mars are covered with soft granular materials, the design of robotic-arm link lengths that reduce energy consumption while considering ground reaction forces and required motions is important for ground penetration tasks. In this study, ground reaction forces acting on a robotic arm during ground penetration were estimated using Resistive Force Theory (RFT). Based on the estimated reaction forces and the force manipulability ellipsoid, an evaluation index R was introduced to evaluate the actuator load, and a method for determining energy-efficient link lengths was proposed. A two-link robotic arm with the link lengths determined by the proposed method was fabricated and experimentally evaluated. The experimental results showed that the link-length combinations determined by the proposed method exhibited the lowest RMS current for all tested trajectories, demonstrating the effectiveness of the proposed method for determining energy-efficient robotic-arm link lengths.
- Open Access
An Experimental Study on the Relationship Between Bearing Capacity and Shear Strength of Loose Soils After Imparting Vibration
Planetary exploration has increasingly relied on mobile robots known as rovers to support space development. Among various locomotion systems, legged mechanisms have attracted attention as a promising approach for achieving high mobility on rough terrain. However, the surfaces of extraterrestrial bodies such as the Moon and Mars are covered with loose regolith that easily deforms under external forces. As a result, legged rovers tend to disturb the ground surface and experience slippage due to leg-induced loading. To address this issue, a previous study proposed a novel walking method in which the rover’s leg applies vibration to the soil before stepping to compact it. Experiments confirmed that this vibration increases the soil’s bearing capacity, defined as its resistance to vertical loading. This increase is attributed to improvements in soil density and particle interconnectivity, which enhance soil shear strength. In this study, the relationship between the bearing capacity of vibration-compacted soil and its shear strength is investigated through experiments. The results reveal a clear correlation between these parameters, indicating that the bearing capacity of vibration-compacted soil can be estimated from shear strength measurements.
Open AccessAn Experimental Study on the Relationship Between Bearing Capacity and Shear Strength of Loose Soils After Imparting Vibration
Planetary exploration has increasingly relied on mobile robots known as rovers to support space development. Among various locomotion systems, legged mechanisms have attracted attention as a promising approach for achieving high mobility on rough terrain. However, the surfaces of extraterrestrial bodies such as the Moon and Mars are covered with loose regolith that easily deforms under external forces. As a result, legged rovers tend to disturb the ground surface and experience slippage due to leg-induced loading. To address this issue, a previous study proposed a novel walking method in which the rover’s leg applies vibration to the soil before stepping to compact it. Experiments confirmed that this vibration increases the soil’s bearing capacity, defined as its resistance to vertical loading. This increase is attributed to improvements in soil density and particle interconnectivity, which enhance soil shear strength. In this study, the relationship between the bearing capacity of vibration-compacted soil and its shear strength is investigated through experiments. The results reveal a clear correlation between these parameters, indicating that the bearing capacity of vibration-compacted soil can be estimated from shear strength measurements.
- Open Access
- 1 January 2026
- Published by BON VIEW PUBLISHING PTE in Journal of Climbing and Walking Robots
Discrete Element Analysis of Reduced Bearing Capacity under Ground Vibration
Numerous missions have targeted planetary bodies, highlighting the need for advanced mobility technologies that enable exploration beyond the surface. Vibration-driven underground locomotion is a promising approach because vibration can alter soil behavior and reduce resistance to movement. However, the particle-scale mechanisms responsible for this reduction remain unclear, limiting the development of efficient vibration-based locomotion systems. In this study, particle-based numerical simulations and experiments were used to investigate how vibration reduces the resistance acting on an object moving through granular ground. A numerical model was developed to reproduce rod-dragging experiments conducted with a vibration amplitude of 0.25 mm at frequencies of 30 Hz and 50 Hz. The simulated resistance showed good agreement with the experimental results under the no-vibration and 50 Hz conditions, with errors within 2%. The results demonstrated that vibration reduced the resistance acting on the moving rod compared with the no-vibration condition. Particle-scale analysis further revealed that vibration generated high-velocity particle regions ahead of the rod and promoted particle rearrangement around it. These effects suppressed particle accumulation in front of the rod, thereby reducing resistance to motion. The findings clarify the relationship between vibration-induced particle flow and reduced soil resistance, providing a physical basis for the development of vibration-driven underground locomotion systems. Beyond planetary exploration, the numerical modeling of vibration-induced changes in granular ground may also contribute to broader engineering applications, including civil engineering problems involving vibrated granular materials. Received: 27 March 2026 | Revised: 27 June 2026 | Accepted: 2 September 2026 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement Data are available from the corresponding author upon reasonable request. Author Contribution Statement Tomohiro Watanabe: Conceptualization, Methodology, Software, Validation, Formal analysis, Investigation, Writing – original draft, Writing – review & editing, Visualization, Project administration, Funding acquisition. Dai Watanabe: Conceptualization, Resources, Writing – review & editing. Kojiro Iizuka: Conceptualization, Resources, Writing – review & editing, Supervision.
- 1 January 2026
- Published by BON VIEW PUBLISHING PTE in Journal of Climbing and Walking Robots
Open AccessDiscrete Element Analysis of Reduced Bearing Capacity under Ground Vibration
Numerous missions have targeted planetary bodies, highlighting the need for advanced mobility technologies that enable exploration beyond the surface. Vibration-driven underground locomotion is a promising approach because vibration can alter soil behavior and reduce resistance to movement. However, the particle-scale mechanisms responsible for this reduction remain unclear, limiting the development of efficient vibration-based locomotion systems. In this study, particle-based numerical simulations and experiments were used to investigate how vibration reduces the resistance acting on an object moving through granular ground. A numerical model was developed to reproduce rod-dragging experiments conducted with a vibration amplitude of 0.25 mm at frequencies of 30 Hz and 50 Hz. The simulated resistance showed good agreement with the experimental results under the no-vibration and 50 Hz conditions, with errors within 2%. The results demonstrated that vibration reduced the resistance acting on the moving rod compared with the no-vibration condition. Particle-scale analysis further revealed that vibration generated high-velocity particle regions ahead of the rod and promoted particle rearrangement around it. These effects suppressed particle accumulation in front of the rod, thereby reducing resistance to motion. The findings clarify the relationship between vibration-induced particle flow and reduced soil resistance, providing a physical basis for the development of vibration-driven underground locomotion systems. Beyond planetary exploration, the numerical modeling of vibration-induced changes in granular ground may also contribute to broader engineering applications, including civil engineering problems involving vibrated granular materials. Received: 27 March 2026 | Revised: 27 June 2026 | Accepted: 2 September 2026 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement Data are available from the corresponding author upon reasonable request. Author Contribution Statement Tomohiro Watanabe: Conceptualization, Methodology, Software, Validation, Formal analysis, Investigation, Writing – original draft, Writing – review & editing, Visualization, Project administration, Funding acquisition. Dai Watanabe: Conceptualization, Resources, Writing – review & editing. Kojiro Iizuka: Conceptualization, Resources, Writing – review & editing, Supervision.
- Open Access
- 1 October 2025
- Published by MDPI AG in Geotechnics
- Vol. 5 (4) , 68
Experimental Verification of Anchor Tip Angles Suitable for Vibratory Penetration into Underwater Saturated Soft Soil
Currently, Japan’s fishing industry is facing a severe decline in its workforce. As a response, fishing mechanization using small underwater robots is promoted. These robots offer advantages due to their compact size, although their operating time is limited. A major source of this limited operating time is posture stabilization, which requires continuous thruster use and rapidly drains the battery. To reduce power consumption, anchoring the robot to the seabed with anchors is proposed. However, due to neutral buoyancy, the available thrust is limited, making penetration into the seabed difficult and reducing stability. To address this, we focus on composite-shaped anchors and vibration. The anchors combine a conical tip and a cylindrical shaft to achieve both penetrability and holding force. However, a trade-off exists between these functions depending on the tip angle; anchors with larger angles provide better holding capacity but lower penetrability. To overcome this limitation, vibration is applied to reduce soil resistance and facilitate anchor penetration. While vibration is known to aid penetration in saturated soft soils, the effect of tip angle under such conditions remains unclear. This study aims to clarify the optimal tip angle for achieving sufficient penetration and holding performance under vibratory conditions. Experiments in underwater saturated soft soil showed that vibration improves both penetration and holding. This effect was strong in anchors with tip angles optimized for holding force. These findings support the development of energy-efficient anchoring systems for autonomous underwater operations in soft seabed environments.
- 1 October 2025
- Published by MDPI AG in Geotechnics
- Vol. 5 (4) , 68
Open AccessExperimental Verification of Anchor Tip Angles Suitable for Vibratory Penetration into Underwater Saturated Soft Soil
Currently, Japan’s fishing industry is facing a severe decline in its workforce. As a response, fishing mechanization using small underwater robots is promoted. These robots offer advantages due to their compact size, although their operating time is limited. A major source of this limited operating time is posture stabilization, which requires continuous thruster use and rapidly drains the battery. To reduce power consumption, anchoring the robot to the seabed with anchors is proposed. However, due to neutral buoyancy, the available thrust is limited, making penetration into the seabed difficult and reducing stability. To address this, we focus on composite-shaped anchors and vibration. The anchors combine a conical tip and a cylindrical shaft to achieve both penetrability and holding force. However, a trade-off exists between these functions depending on the tip angle; anchors with larger angles provide better holding capacity but lower penetrability. To overcome this limitation, vibration is applied to reduce soil resistance and facilitate anchor penetration. While vibration is known to aid penetration in saturated soft soils, the effect of tip angle under such conditions remains unclear. This study aims to clarify the optimal tip angle for achieving sufficient penetration and holding performance under vibratory conditions. Experiments in underwater saturated soft soil showed that vibration improves both penetration and holding. This effect was strong in anchors with tip angles optimized for holding force. These findings support the development of energy-efficient anchoring systems for autonomous underwater operations in soft seabed environments.
- Open Access
- 7 August 2025
- Published by MDPI AG in Geotechnics
- Vol. 5 (3) , 54
Experimental Investigation of Enhanced Bearing Capacity Due to Vibration on Loose Soils Under Low-Atmospheric-Pressure Conditions
Legged rovers are gaining interest for planetary exploration due to their high mobility. However, loose regolith on celestial surfaces like the Moon and Mars often leads to slippage as legs disturb the soil. To address this, a walking technique has been proposed that enhances soil support by transmitting vibrations from the robot’s legs. This approach aims to improve mobility by increasing the ground’s bearing capacity. To evaluate its effectiveness in space-like environments, this study experimentally investigates the effect of vibration on bearing capacity under low atmospheric pressure, which can influence soil behavior due to reduced air resistance. Using Silica No. 5 and Toyoura sand as test materials, experiments were conducted to compare bearing capacities under standard and low pressure. The results demonstrate that applying vibration significantly improves bearing capacity and that the influence of atmospheric pressure is minimal. These findings support the viability of vibration-assisted locomotion for planetary rovers operating in low-pressure extraterrestrial environments.
- 7 August 2025
- Published by MDPI AG in Geotechnics
- Vol. 5 (3) , 54
Open AccessExperimental Investigation of Enhanced Bearing Capacity Due to Vibration on Loose Soils Under Low-Atmospheric-Pressure Conditions
Legged rovers are gaining interest for planetary exploration due to their high mobility. However, loose regolith on celestial surfaces like the Moon and Mars often leads to slippage as legs disturb the soil. To address this, a walking technique has been proposed that enhances soil support by transmitting vibrations from the robot’s legs. This approach aims to improve mobility by increasing the ground’s bearing capacity. To evaluate its effectiveness in space-like environments, this study experimentally investigates the effect of vibration on bearing capacity under low atmospheric pressure, which can influence soil behavior due to reduced air resistance. Using Silica No. 5 and Toyoura sand as test materials, experiments were conducted to compare bearing capacities under standard and low pressure. The results demonstrate that applying vibration significantly improves bearing capacity and that the influence of atmospheric pressure is minimal. These findings support the viability of vibration-assisted locomotion for planetary rovers operating in low-pressure extraterrestrial environments.
- Open Access
- 18 March 2025
- Published by MDPI AG in Geotechnics
- Vol. 5 (1) , 21
Experimental Investigation of the Relationship Between Vibration Acceleration and Bearing Capacity for Space Exploration Legged Rovers
In the exploration missions for Mars and the Moon, rovers with legs as mobility mechanisms are necessitated owing to their high mobility. However, the surface of Mars and the Moon is loose, leading the rovers to slip by virtue of the ground easily deforming due to the leg movements of the rover. A walking method aimed at preventing slippage was proposed to address this issue. Prior studies have confirmed that applying vibrations increases the shear strength of the ground and sinkage of the rover legs, thereby enhancing bearing capacity, that is, the resistance force exerted on the legs of the rover by the ground. Identifying the optimal vibration is crucial for maximizing performance. This study investigated the relationship between bearing capacity and vibration acceleration, revealing a correlation between the peak bearing capacity and the main vibration acceleration spectra. This finding provides insight into determining the optimal time for imparting vibrations to the ground, thereby improving the performance of space exploration rovers.
- 18 March 2025
- Published by MDPI AG in Geotechnics
- Vol. 5 (1) , 21
Open AccessExperimental Investigation of the Relationship Between Vibration Acceleration and Bearing Capacity for Space Exploration Legged Rovers
In the exploration missions for Mars and the Moon, rovers with legs as mobility mechanisms are necessitated owing to their high mobility. However, the surface of Mars and the Moon is loose, leading the rovers to slip by virtue of the ground easily deforming due to the leg movements of the rover. A walking method aimed at preventing slippage was proposed to address this issue. Prior studies have confirmed that applying vibrations increases the shear strength of the ground and sinkage of the rover legs, thereby enhancing bearing capacity, that is, the resistance force exerted on the legs of the rover by the ground. Identifying the optimal vibration is crucial for maximizing performance. This study investigated the relationship between bearing capacity and vibration acceleration, revealing a correlation between the peak bearing capacity and the main vibration acceleration spectra. This finding provides insight into determining the optimal time for imparting vibrations to the ground, thereby improving the performance of space exploration rovers.
- 29 November 2024
- Published by Elsevier in Journal of Terramechanics
- Vol. 118
Analyzing bearing capacity changes due to vibration in discrete element method simulations
- 29 November 2024
- Published by Elsevier in Journal of Terramechanics
- Vol. 118
Analyzing bearing capacity changes due to vibration in discrete element method simulations
- Open Access
Method for Underground Motion Using Vibration-Induced Ground Resistance Changes for Planetary Exploration
Exploration rovers have difficulty moving underground because the drag force from the ground restricts their movement; this hinders underground exploration. This study aimed to address this challenge. We posit a hypothesis that the rover can move underground by imparting vibration to the ground and changing the drag force. To validate this hypothesis, a testbed that moves underground was developed, and the drag force when imparting vibration was investigated. The results revealed that the drag force while imparting vibration is smaller than that after imparting vibration, and we accordingly devised the operation for moving underground. The proposed operation causes bias of the drag force by imparting vibration to make the testbed move in the direction of the small drag force. The effectiveness of the proposed method was assessed through an experiment wherein the testbed was set to move underground. The experimental results demonstrate the superiority of the proposed method, as the movement distance achieved with vibration is considerably greater than that without vibration. The findings validate the hypothesis that using vibration for underground motion is effective in improving mobility and provides valuable insights into the design of robots for underground motion.
Open AccessMethod for Underground Motion Using Vibration-Induced Ground Resistance Changes for Planetary Exploration
Exploration rovers have difficulty moving underground because the drag force from the ground restricts their movement; this hinders underground exploration. This study aimed to address this challenge. We posit a hypothesis that the rover can move underground by imparting vibration to the ground and changing the drag force. To validate this hypothesis, a testbed that moves underground was developed, and the drag force when imparting vibration was investigated. The results revealed that the drag force while imparting vibration is smaller than that after imparting vibration, and we accordingly devised the operation for moving underground. The proposed operation causes bias of the drag force by imparting vibration to make the testbed move in the direction of the small drag force. The effectiveness of the proposed method was assessed through an experiment wherein the testbed was set to move underground. The experimental results demonstrate the superiority of the proposed method, as the movement distance achieved with vibration is considerably greater than that without vibration. The findings validate the hypothesis that using vibration for underground motion is effective in improving mobility and provides valuable insights into the design of robots for underground motion.
- 1 January 2024
- Published by Springer Nature
- p. 133-143
Verification of Decreasing Bearing Capacity While Imparting Vibration to Ground in Discrete Element Method Simulation
- 1 January 2024
- Published by Springer Nature
- p. 133-143
Verification of Decreasing Bearing Capacity While Imparting Vibration to Ground in Discrete Element Method Simulation
- Open Access
- 27 November 2023
- Published by Springer Nature in ROBOMECH Journal
- Vol. 10 (1) , 1-21
Experimental investigation of relationship between bearing capacity and vibration parameters for planetary exploration legged rovers
In recent years, robots with leg mechanisms have received considerable attention as high-running planetary exploration rovers. Rovers undertaking planetary exploration require outstanding running performance to travel on loose ground on which they mostly slip and hardly move forward. The movement of the rover easily deforms the surface of loose ground. This problem can be solved by increasing the bearing capacity. The bearing capacity, the resistance force exerted on the rover legs when they make contact with the ground, needs to be sufficiently large to prevent legged rovers from slipping on loose ground. The bearing capacity can be increased by compaction of the ground by imparting vibrations. This study investigates the relationship between the bearing capacity in the horizontal direction and vibration parameters because this relationship offers valuable information for improving the running performance of legged rovers. First, we investigated the effect of changing the vibration parameters on the bearing capacity. Our experimental results show that the bearing capacity is related to vibration acceleration. These results suggest that the bearing capacity can be estimated from the vibration acceleration. Next, the frequency and amplitude were compared as vibration parameters to devise an efficient method for increasing the bearing capacity. The results of these experiments showed that high-amplitude vibrations increase the bearing capacity to a greater extent than high-frequency vibrations. The reason is that high-amplitude vibrations generate larger additional vibrations by the collision between the rod and the ground than high-frequency vibrations. This knowledge is valuable for selecting a suitable vibration that can efficiently increase the bearing capacity. This study suggests a method of facilitating further planetary exploration using legged rovers.
- 27 November 2023
- Published by Springer Nature in ROBOMECH Journal
- Vol. 10 (1) , 1-21
Open AccessExperimental investigation of relationship between bearing capacity and vibration parameters for planetary exploration legged rovers
In recent years, robots with leg mechanisms have received considerable attention as high-running planetary exploration rovers. Rovers undertaking planetary exploration require outstanding running performance to travel on loose ground on which they mostly slip and hardly move forward. The movement of the rover easily deforms the surface of loose ground. This problem can be solved by increasing the bearing capacity. The bearing capacity, the resistance force exerted on the rover legs when they make contact with the ground, needs to be sufficiently large to prevent legged rovers from slipping on loose ground. The bearing capacity can be increased by compaction of the ground by imparting vibrations. This study investigates the relationship between the bearing capacity in the horizontal direction and vibration parameters because this relationship offers valuable information for improving the running performance of legged rovers. First, we investigated the effect of changing the vibration parameters on the bearing capacity. Our experimental results show that the bearing capacity is related to vibration acceleration. These results suggest that the bearing capacity can be estimated from the vibration acceleration. Next, the frequency and amplitude were compared as vibration parameters to devise an efficient method for increasing the bearing capacity. The results of these experiments showed that high-amplitude vibrations increase the bearing capacity to a greater extent than high-frequency vibrations. The reason is that high-amplitude vibrations generate larger additional vibrations by the collision between the rod and the ground than high-frequency vibrations. This knowledge is valuable for selecting a suitable vibration that can efficiently increase the bearing capacity. This study suggests a method of facilitating further planetary exploration using legged rovers.