Binbin Su
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Binbin Su has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Huidong Xie
Xi’an University of Architecture and Technology
7 shared publications Qiyu Zhao
School of Chemistry and Chemical Engineering, Xi’an University of Architecture and Technology, Xi’an, 710055, Shaanxi, China
4 shared publicationsChang Yang
Engineering Comprehensive Training Center, Xi’an University of Architecture and Technology, Xi’an 710055, Shaanxi, China
3 shared publicationsRuiqing Zhang
3 shared publications- Zuobin Tang
School of Chemistry and Chemical Engineering Xi'an University of Architecture and Technology Xi'an P. R. China
3 shared publications Chenning Sun
Xi’an University of Architecture and Technology
2 shared publications
Latest Publications
- 3 November 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (45) , 26756-26765
Halogen-Driven Tetrahedral Distortion Enables Tunable White-Light Emission and Scintillation Properties in Hybrid Zinc Halides
Organic–inorganic hybrid zinc halides have emerged as promising luminescent materials for solid-state lighting and radiation detection owing to their facile synthesis, tunable crystal structures, and rich photophysical behaviors. Herein, we report two hybrid zinc halides, (C5H14N2)ZnCl4·0.5H2O (Cl4) and (C5H14N2)ZnBr4·H2O (Br4), wherein halogen substitution from Cl– to Br– successfully achieves tunable white-light emission with color coordinates of (0.23, 0.25) for Cl4 and (0.26, 0.29) for Br4, originating from the synergistic contribution of singlet and triplet excited states. Benefiting from the favorable crystal-field environment of the bromide host, Mn2+ ions are further introduced into the Br4 lattice via an N-ion-doping strategy. The incorporated Mn2+ activators endow Br4 with prominent radioluminescence under X-ray excitation, and the optimized Br4:0.6Mn2+ exhibits a light yield of 16900 photons/MeV and a detection limit of 1.28 μGyair/s. Further, a spatial resolution of 7.6 Lp/mm is achieved in X-ray imaging based on the flexible Br4:0.6Mn2+@PDMS films. This work establishes a straightforward anion engineering strategy to simultaneously realize white photoluminescence and efficient X-ray scintillation within a single hybrid zinc halide system, providing a facile route toward multifunctional luminescent materials for white-light illumination and high-performance X-ray imaging.
- 3 November 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (45) , 26756-26765
Halogen-Driven Tetrahedral Distortion Enables Tunable White-Light Emission and Scintillation Properties in Hybrid Zinc Halides
Organic–inorganic hybrid zinc halides have emerged as promising luminescent materials for solid-state lighting and radiation detection owing to their facile synthesis, tunable crystal structures, and rich photophysical behaviors. Herein, we report two hybrid zinc halides, (C5H14N2)ZnCl4·0.5H2O (Cl4) and (C5H14N2)ZnBr4·H2O (Br4), wherein halogen substitution from Cl– to Br– successfully achieves tunable white-light emission with color coordinates of (0.23, 0.25) for Cl4 and (0.26, 0.29) for Br4, originating from the synergistic contribution of singlet and triplet excited states. Benefiting from the favorable crystal-field environment of the bromide host, Mn2+ ions are further introduced into the Br4 lattice via an N-ion-doping strategy. The incorporated Mn2+ activators endow Br4 with prominent radioluminescence under X-ray excitation, and the optimized Br4:0.6Mn2+ exhibits a light yield of 16900 photons/MeV and a detection limit of 1.28 μGyair/s. Further, a spatial resolution of 7.6 Lp/mm is achieved in X-ray imaging based on the flexible Br4:0.6Mn2+@PDMS films. This work establishes a straightforward anion engineering strategy to simultaneously realize white photoluminescence and efficient X-ray scintillation within a single hybrid zinc halide system, providing a facile route toward multifunctional luminescent materials for white-light illumination and high-performance X-ray imaging.
- 15 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (39) , 18612-18622
Thermochromic hybrid Ce-based metal halide for anti-counterfeiting encryption
The crystal of (NMe 4 ) 2 CeCl 5 (H 2 O)·CH 3 OH shows thermochromic luminescence from violet to blue coming from the 5d–4f transition of Ce 3+ . Compositing it with polystyrene enables dual-mode anti-counterfeiting encryption via thermal and UV stimuli.
- 15 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (39) , 18612-18622
Thermochromic hybrid Ce-based metal halide for anti-counterfeiting encryption
The crystal of (NMe 4 ) 2 CeCl 5 (H 2 O)·CH 3 OH shows thermochromic luminescence from violet to blue coming from the 5d–4f transition of Ce 3+ . Compositing it with polystyrene enables dual-mode anti-counterfeiting encryption via thermal and UV stimuli.
- 12 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (85)
Halogen‐Regulated Luminescent Silver(I) Halide Complexes and the Gel Scintillation Screen for X‐Ray Imaging
Metal halide scintillators have attracted continuously increasing interest for low‐dose and high‐resolution X‐ray imaging, yet typical luminescent silver halides suffer from severe hygroscopicity and exciton quenching caused by Ag–Ag cluster aggregation. To address these challenges, we design and report mononuclear five‐coordinate silver(I) halide complexes (dppb) 2 AgX·DMSO (X = I, Br, Cl) with 1,2‐Bis(diphenylphosphino)benzene (dppb) ligand. Halogen substitution enables tunable broadband emission, while the chloride analogue achieves efficient thermally activated delayed fluorescence (TADF) and a high PLQY of 76%. The chloride analogue possesses more rigid AgClP 4 coordination environment compared with its bromide and iodide counterparts, enabling restricts excited‐state relaxation, suppresses non‐radiative decay, and preserves favorable singlet‐triplet energetics and spin‐orbit coupling. Meanwhile, the chloride analogue shows superior scintillation with a high light yield of 26631 photons/MeV, and a detection limit of 304.67 nGy air s −1 . Furthermore, a high spatial resolution of 20.2 lp mm −1 for X‐ray imaging is achieved based on the transparent Ag‐Cl composite gel scintillator screen. This work not only provides a promising design principle for achieving high scintillation in TADF‐type Ag(I) halide complexes by halogen regulation, but also provide a new platform for Ag(I) halide complexes in X‐ray imaging.
- 12 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (85)
Halogen‐Regulated Luminescent Silver(I) Halide Complexes and the Gel Scintillation Screen for X‐Ray Imaging
Metal halide scintillators have attracted continuously increasing interest for low‐dose and high‐resolution X‐ray imaging, yet typical luminescent silver halides suffer from severe hygroscopicity and exciton quenching caused by Ag–Ag cluster aggregation. To address these challenges, we design and report mononuclear five‐coordinate silver(I) halide complexes (dppb) 2 AgX·DMSO (X = I, Br, Cl) with 1,2‐Bis(diphenylphosphino)benzene (dppb) ligand. Halogen substitution enables tunable broadband emission, while the chloride analogue achieves efficient thermally activated delayed fluorescence (TADF) and a high PLQY of 76%. The chloride analogue possesses more rigid AgClP 4 coordination environment compared with its bromide and iodide counterparts, enabling restricts excited‐state relaxation, suppresses non‐radiative decay, and preserves favorable singlet‐triplet energetics and spin‐orbit coupling. Meanwhile, the chloride analogue shows superior scintillation with a high light yield of 26631 photons/MeV, and a detection limit of 304.67 nGy air s −1 . Furthermore, a high spatial resolution of 20.2 lp mm −1 for X‐ray imaging is achieved based on the transparent Ag‐Cl composite gel scintillator screen. This work not only provides a promising design principle for achieving high scintillation in TADF‐type Ag(I) halide complexes by halogen regulation, but also provide a new platform for Ag(I) halide complexes in X‐ray imaging.
- 20 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (30) , 17669-17677
Highly Thermostable Hybrid Manganese Bromide as a Narrow-Band Green Phosphor for Backlight Displays
Zero-dimensional manganese-based halides are distinguished by their advantages, such as high luminescence efficiency, tunable spectra, and straightforward preparation. However, the challenge of synergistically enhancing their luminescence and thermal stability remains a critical issue. Here, we synthesized a novel Mn(II)-based metal halide of (Meop)2MnBr4 (Meop = 1-(2-methoxyphenyl)piperazine). Characterized by a distinct d–d transition of Mn2+, this material demonstrates a narrow-band green emission centered at 521 nm. It emits with a full width at half-maximum of merely 41 nm and achieves a near-unity photoluminescence quantum yield (99%). In addition, the color purity of (Meop)2MnBr4 was calculated to be 71.09%, which is higher than the 53.21% of the commercial phosphor β-sialon:Eu2+. Benefiting from its structure, (Meop)2MnBr4 demonstrates outstanding thermal stability, with its photoluminescence intensity at 430 K remaining 93% of the original value at 305 K. Based on the above advantages, we fabricated a white LED device using the (Meop)2MnBr4 powders. The WLED yields a luminous efficacy of 90.35 lm·W–1 alongside a broad NTSC color gamut coverage of 105.7%. This work not only provides new light on the synthesis of high-performance luminescent materials but also paves the way for their practical deployment.
- 20 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (30) , 17669-17677
Highly Thermostable Hybrid Manganese Bromide as a Narrow-Band Green Phosphor for Backlight Displays
Zero-dimensional manganese-based halides are distinguished by their advantages, such as high luminescence efficiency, tunable spectra, and straightforward preparation. However, the challenge of synergistically enhancing their luminescence and thermal stability remains a critical issue. Here, we synthesized a novel Mn(II)-based metal halide of (Meop)2MnBr4 (Meop = 1-(2-methoxyphenyl)piperazine). Characterized by a distinct d–d transition of Mn2+, this material demonstrates a narrow-band green emission centered at 521 nm. It emits with a full width at half-maximum of merely 41 nm and achieves a near-unity photoluminescence quantum yield (99%). In addition, the color purity of (Meop)2MnBr4 was calculated to be 71.09%, which is higher than the 53.21% of the commercial phosphor β-sialon:Eu2+. Benefiting from its structure, (Meop)2MnBr4 demonstrates outstanding thermal stability, with its photoluminescence intensity at 430 K remaining 93% of the original value at 305 K. Based on the above advantages, we fabricated a white LED device using the (Meop)2MnBr4 powders. The WLED yields a luminous efficacy of 90.35 lm·W–1 alongside a broad NTSC color gamut coverage of 105.7%. This work not only provides new light on the synthesis of high-performance luminescent materials but also paves the way for their practical deployment.
- 16 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (13) , 5241-5254
A near-unity quantum yield hybrid antimony halide for solid-state lighting and fingerprint detection
(ATPPO) 2 SbCl 5 shows a near-unity broad-band orange emission at 605 nm as well as a weak blue emission. The material exhibits negative thermal quenching in the 80–255 K range, which can be used to fabricate LEDs and for fingerprint detection.
- 16 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (13) , 5241-5254
A near-unity quantum yield hybrid antimony halide for solid-state lighting and fingerprint detection
(ATPPO) 2 SbCl 5 shows a near-unity broad-band orange emission at 605 nm as well as a weak blue emission. The material exhibits negative thermal quenching in the 80–255 K range, which can be used to fabricate LEDs and for fingerprint detection.
- 11 December 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (51) , 24444
Correction to “Zero-Dimensional Hybrid Antimony Chloride with Near-Unity Broad-Band Orange-Red Emission toward Solid-State Lighting”
- 11 December 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (51) , 24444
Correction to “Zero-Dimensional Hybrid Antimony Chloride with Near-Unity Broad-Band Orange-Red Emission toward Solid-State Lighting”
- 30 May 2024
- Published by Wiley in Laser & Photonics Reviews
- Vol. 18 (10)
Near‐Infrared and Cyan Dual‐Band Emission Copper Iodide Based Halides with [Cu6I9]3− Cluster
The luminescence property of various compounds is developed in the photoelectric applications field, while the near‐infrared (NIR) dual‐band emission of compounds is extremely challenging. Herein, 0D Cu(I)‐based organic–inorganic module (ETA)3Cu6I9 is synthesized to achieve NIR and cyan dual‐band emission in metal halide systems. Density functional theory (DFT) calculations combined with comprehensive spectroscopic data reveal its emission mechanism. Under the excitation at 371 nm, (ETA)3Cu6I9 shows the broadband NIR emission peaking at 775 nm with a large wavelength, attributed to the triple‐cluster‐center (3CC) transition. Meanwhile, under 286 nm excitation, (ETA)3Cu6I9 shows a bright cyan emission peaking at 490 nm, attributed to the metal‐to‐ligand charge transfer (MLCT) or halide‐to‐ligand charge transfer (XLCT) transitions. Moreover, (ETA)3Cu6I9 presents relatively superior thermal and air stability. Benefiting from the good stability of (ETA)3Cu6I9, the as‐fabricated NIR‐LED device demonstrates great potential in biological imaging and night vision. This study opens up a new way for designing new non‐toxic NIR and cyan dual‐band emission materials, which guides to synthesize new materials in metal halide field.
- 30 May 2024
- Published by Wiley in Laser & Photonics Reviews
- Vol. 18 (10)
Near‐Infrared and Cyan Dual‐Band Emission Copper Iodide Based Halides with [Cu6I9]3− Cluster
The luminescence property of various compounds is developed in the photoelectric applications field, while the near‐infrared (NIR) dual‐band emission of compounds is extremely challenging. Herein, 0D Cu(I)‐based organic–inorganic module (ETA)3Cu6I9 is synthesized to achieve NIR and cyan dual‐band emission in metal halide systems. Density functional theory (DFT) calculations combined with comprehensive spectroscopic data reveal its emission mechanism. Under the excitation at 371 nm, (ETA)3Cu6I9 shows the broadband NIR emission peaking at 775 nm with a large wavelength, attributed to the triple‐cluster‐center (3CC) transition. Meanwhile, under 286 nm excitation, (ETA)3Cu6I9 shows a bright cyan emission peaking at 490 nm, attributed to the metal‐to‐ligand charge transfer (MLCT) or halide‐to‐ligand charge transfer (XLCT) transitions. Moreover, (ETA)3Cu6I9 presents relatively superior thermal and air stability. Benefiting from the good stability of (ETA)3Cu6I9, the as‐fabricated NIR‐LED device demonstrates great potential in biological imaging and night vision. This study opens up a new way for designing new non‐toxic NIR and cyan dual‐band emission materials, which guides to synthesize new materials in metal halide field.
- 26 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (25) , 9266-9273
Near-unity PLQY and high anti-thermal quenching red luminescence from one-dimensional hybrid manganese chloride for efficient and stable white light-emitting diodes
Red emitting one-dimensional hybrid manganese chloride (TMA)MnCl3 shows a near-unity PLQY, as well as the high anti-thermal quenching behavior due to the high structural rigidity.
- 26 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (25) , 9266-9273
Near-unity PLQY and high anti-thermal quenching red luminescence from one-dimensional hybrid manganese chloride for efficient and stable white light-emitting diodes
Red emitting one-dimensional hybrid manganese chloride (TMA)MnCl3 shows a near-unity PLQY, as well as the high anti-thermal quenching behavior due to the high structural rigidity.
- 21 November 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (48) , 19771-19779
Zero-Dimensional Hybrid Antimony Chloride with Near-Unity Broad-Band Orange-Red Emission toward Solid-State Lighting
Zero-dimensional (0D) hybrid metal halides are attractive owing to their distinctive structure as well as photoluminescence (PL) characteristics. To discover 0D hybrid metal halides with high photoluminescence quantum yield and good stability is of great significance for white light-emitting diodes (LEDs). Herein, a novel hybrid antimony chloride (CTP)2SbCl5 is synthesized, which shows a bright broad-band orange-red emission peaking at 620 nm under the low energy excitation (365 nm), achieving an excellent photoluminescence quantum yield of 96.8%. In addition, (CTP)2SbCl5 shows an additional emission peaking at 470 nm when excited at high energy (323 nm). PL spectra and density functional theory results demonstrate that the observed dual-band emission originates from the singlet and triplet self-trapped excitons confined in isolated [SbCl5]2- square pyramids. Moreover, (CTP)2SbCl5 presents relatively superior air stability, and the PL intensity still maintains 78% of the initial PL intensity when exposed to the air for above 2 weeks. Benefiting from high-efficiency PL emission and good stability of (CTP)2SbCl5, a stable warm white LED device with a 92.3% color rendering index was prepared by coating blue phosphor BaMgAl10O17:Eu2+, green (Sr,Ba)2SiO4:Eu2+, and orange-red (CTP)2SbCl5 on a 365 nm LED chip. This work provides an efficient luminescent material and also demonstrates the potential application of 0D hybrid antimony chloride in solid-state lighting.
- 21 November 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (48) , 19771-19779
Zero-Dimensional Hybrid Antimony Chloride with Near-Unity Broad-Band Orange-Red Emission toward Solid-State Lighting
Zero-dimensional (0D) hybrid metal halides are attractive owing to their distinctive structure as well as photoluminescence (PL) characteristics. To discover 0D hybrid metal halides with high photoluminescence quantum yield and good stability is of great significance for white light-emitting diodes (LEDs). Herein, a novel hybrid antimony chloride (CTP)2SbCl5 is synthesized, which shows a bright broad-band orange-red emission peaking at 620 nm under the low energy excitation (365 nm), achieving an excellent photoluminescence quantum yield of 96.8%. In addition, (CTP)2SbCl5 shows an additional emission peaking at 470 nm when excited at high energy (323 nm). PL spectra and density functional theory results demonstrate that the observed dual-band emission originates from the singlet and triplet self-trapped excitons confined in isolated [SbCl5]2- square pyramids. Moreover, (CTP)2SbCl5 presents relatively superior air stability, and the PL intensity still maintains 78% of the initial PL intensity when exposed to the air for above 2 weeks. Benefiting from high-efficiency PL emission and good stability of (CTP)2SbCl5, a stable warm white LED device with a 92.3% color rendering index was prepared by coating blue phosphor BaMgAl10O17:Eu2+, green (Sr,Ba)2SiO4:Eu2+, and orange-red (CTP)2SbCl5 on a 365 nm LED chip. This work provides an efficient luminescent material and also demonstrates the potential application of 0D hybrid antimony chloride in solid-state lighting.