ADAndrea Doldi

Andrea Doldi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andrea Doldi has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Heating Rate of Light-Absorbing Aerosols from Midlatitudes to the Arctic: Implications for Arctic Warming and Northward Energy Transport

    by Luca Ferrero, Piotr Markuszewski, Martin Rigler, Asta Gregorič, Griša Močnik, Przemysław Makuch, Violetta Drozdowska, Małgorzata Kitowska, Angelo Riccio, Yuan-Bing Zhao, et al.

    Arctic surface temperatures have increased much faster than the global mean, leading to Arctic amplification; the role of light-absorbing aerosols (LAAs; especially black carbon) in this amplification remains poorly constrained by observations. In this study, ship-borne measurements of LAAs heating rate (HR) from four research cruises between Europe and the Arctic were combined with reanalysis data (MERRA-2) determining a reanalysis HR field driving climate model simulations (CESM2). The aim was to assess how the meridional gradients in LAAs HR can influence Arctic warming by modulating atmospheric energy transport. LAAs HR declined from 335.5 ± 6.6 mK d−1 in summer and 254.0 ± 17.4 mK d−1 in winter, near Europe, to 0.9 ± 0.1 mK d−1 in summer, with zero HR inferred under polar-night conditions in winter. This gradient creates more than two orders of magnitude of atmospheric power surplus between midlatitudes and the Arctic, enhancing the poleward atmospheric meridional heat transport by 7 ± 2 and 5 ± 1 TW (summer and winter; CESM2 results). An Arctic-to-global temperature response ratio of 1.1 emerged in summer and was not meaningfully defined in winter, as the global-mean temperature response was statistically indistinguishable from zero, while the Arctic response remained positive due to the remote effect of LAAs.

  • Open Access

    Reply on RC3

    by Irene Gini, Mattia Borelli, Guido Pirovano, Alessandra Balzarini, Amedeo Manuel Cefalì, Ezio Giovanni Bolzacchini, Andrea Doldi, Ludovica Giovanazzi, Niccolò Losi, Luca Ferrero

    The hygroscopic behavior of atmospheric aerosols is controlled by their chemical composition, which determines phase transitions, water uptake and physical state. Aerosol hydration influences particle size, mass, optical and chemical properties, making it a key process in atmospheric science. This study evaluates the performance of ISORROPIA 2.1, a thermodynamic equilibrium model, in predicting aerosol water uptake across a wide range of aerosol types, including indoor and outdoor (urban, extra-urban and marine) aerosols and deposits on electrical insulators. Inorganic composition was determined by ion chromatography, while deliquescence behavior was experimentally characterized using an Aerosol Exposure Chamber, providing a comprehensive dataset for model validation. ISORROPIA 2.1 accurately reproduces deliquescence relative humidity (DRH) and hygroscopic growth in sulfate–nitrate–ammonium dominated systems, with mean deviations of 4.3 ± 2.6 % RH for the onset of deliquescence (DRHs) and 4.4 ± 3.2 % RH for completion (DRHe). In contrast, ammonium-poor mixtures enriched in alkali and alkaline-earth ions (K+, Mg2+, Ca2+, Na+), including marine aerosol and insulator deposits, show non-physical humidification behavior characterized by discontinuous liquid–solid transitions. These anomalies arise from routine-selection instabilities in dust-rich regimes. Targeted code refinements improved model stability and water-uptake predictions, extending the applicability of ISORROPIA 2.1 to sulfate-poor, sodium- and crustal-rich systems. Overall, this work provides an experimental benchmark for aerosol thermodynamics, identifies the compositional limits of ISORROPIA 2.1 and broadens its applicability to complex inorganic aerosol mixtures.

  • Open Access

    Reply on RC2

    by Irene Gini, Mattia Borelli, Guido Pirovano, Alessandra Balzarini, Amedeo Manuel Cefalì, Ezio Giovanni Bolzacchini, Andrea Doldi, Ludovica Giovanazzi, Niccolò Losi, Luca Ferrero

    The hygroscopic behavior of atmospheric aerosols is controlled by their chemical composition, which determines phase transitions, water uptake and physical state. Aerosol hydration influences particle size, mass, optical and chemical properties, making it a key process in atmospheric science. This study evaluates the performance of ISORROPIA 2.1, a thermodynamic equilibrium model, in predicting aerosol water uptake across a wide range of aerosol types, including indoor and outdoor (urban, extra-urban and marine) aerosols and deposits on electrical insulators. Inorganic composition was determined by ion chromatography, while deliquescence behavior was experimentally characterized using an Aerosol Exposure Chamber, providing a comprehensive dataset for model validation. ISORROPIA 2.1 accurately reproduces deliquescence relative humidity (DRH) and hygroscopic growth in sulfate–nitrate–ammonium dominated systems, with mean deviations of 4.3 ± 2.6 % RH for the onset of deliquescence (DRHs) and 4.4 ± 3.2 % RH for completion (DRHe). In contrast, ammonium-poor mixtures enriched in alkali and alkaline-earth ions (K+, Mg2+, Ca2+, Na+), including marine aerosol and insulator deposits, show non-physical humidification behavior characterized by discontinuous liquid–solid transitions. These anomalies arise from routine-selection instabilities in dust-rich regimes. Targeted code refinements improved model stability and water-uptake predictions, extending the applicability of ISORROPIA 2.1 to sulfate-poor, sodium- and crustal-rich systems. Overall, this work provides an experimental benchmark for aerosol thermodynamics, identifies the compositional limits of ISORROPIA 2.1 and broadens its applicability to complex inorganic aerosol mixtures.

  • Open Access

    Reply on RC1

    by Irene Gini, Mattia Borelli, Guido Pirovano, Alessandra Balzarini, Amedeo Manuel Cefalì, Ezio Giovanni Bolzacchini, Andrea Doldi, Ludovica Giovanazzi, Niccolò Losi, Luca Ferrero

    The hygroscopic behavior of atmospheric aerosols is controlled by their chemical composition, which determines phase transitions, water uptake and physical state. Aerosol hydration influences particle size, mass, optical and chemical properties, making it a key process in atmospheric science. This study evaluates the performance of ISORROPIA 2.1, a thermodynamic equilibrium model, in predicting aerosol water uptake across a wide range of aerosol types, including indoor and outdoor (urban, extra-urban and marine) aerosols and deposits on electrical insulators. Inorganic composition was determined by ion chromatography, while deliquescence behavior was experimentally characterized using an Aerosol Exposure Chamber, providing a comprehensive dataset for model validation. ISORROPIA 2.1 accurately reproduces deliquescence relative humidity (DRH) and hygroscopic growth in sulfate–nitrate–ammonium dominated systems, with mean deviations of 4.3 ± 2.6 % RH for the onset of deliquescence (DRHs) and 4.4 ± 3.2 % RH for completion (DRHe). In contrast, ammonium-poor mixtures enriched in alkali and alkaline-earth ions (K+, Mg2+, Ca2+, Na+), including marine aerosol and insulator deposits, show non-physical humidification behavior characterized by discontinuous liquid–solid transitions. These anomalies arise from routine-selection instabilities in dust-rich regimes. Targeted code refinements improved model stability and water-uptake predictions, extending the applicability of ISORROPIA 2.1 to sulfate-poor, sodium- and crustal-rich systems. Overall, this work provides an experimental benchmark for aerosol thermodynamics, identifies the compositional limits of ISORROPIA 2.1 and broadens its applicability to complex inorganic aerosol mixtures.

  • Open Access

    Particle concentrations during the manufacturing of biobased composite polyurethane foam panels

    by Antti Joonas Koivisto, Rossella Daniela Bengalli, Luca Ferrero, Paride Mantecca, Andrea Doldi, Fabrizio Ravegnani, Ilaria Zanoni, Anna Costa, Letizia Verdolotti, Federica Recupido, et al.

    Background Exposure to filler powder particles was evaluated during the manufacturing of 12 biobased nano-enabled polyurethane (PU) foam panels in a research and development facility based on a novel pilot plant technology. Particle emissions were investigated in PU foam production at weighing filler powders (GasBeton®, diatomite, and functionalized silica), 2) loading the powders into a reactive chamber and mixing, 3) casting into a foaming mold, and 4) a subsequent foaming phase, where the exposure assessment was performed for the first three phases. Methods Particle concentrations were measured in the near-field (NF) and far-field (FF) using online aerosol particle monitors, and particles were sampled from workplace air for gravimetric analysis and image and elemental analysis. Operational conditions were registered, including air flow measurements. Results Process times were in the order of 1 minute; despite the use of online instruments with time resolutions of 1 second (ELPI), it was not possible to distinguish concentrations between different powder weighing. Due to incomplete air mixing in the NF, it was not possible to assess particle loss rates. Thus, emissions could not be quantified. Process particle number and ≤ 10 μm and respirable mass concentrations were up to 31.2 #/cm 3 (pouring; average duration 1 minute; handling rate 700 g/min), 538 μg/m 3 and 140 μg/m 3 (weighing; average duration 2 minutes; handling rate 350 g/min), respectively. Maximum exposure potential was assessed for each task, assuming a continuous process. The maximum risk characterization factor was 0.4 for crystalline silica external exposure, which is considered adequately controlled. Electron microscopy analysis of particles sampled from the air confirmed the presence of filler particles, whereas ICP-OES analysis led to inconclusive results. Conclusions Powder filler exposure was adequately controlled during continuous and manual weighing, pouring, and casting processes when local exhaust ventilations are applied. Exposure risk to liquid components was not evaluated.

  • Open Access

    Comment on egusphere-2026-3968

    by Irene Gini, Mattia Borelli, Guido Pirovano, Alessandra Balzarini, Amedeo Manuel Cefalì, Ezio Giovanni Bolzacchini, Andrea Doldi, Ludovica Giovanazzi, Niccolò Losi, Luca Ferrero

    The hygroscopic behavior of atmospheric aerosols is controlled by their chemical composition, which determines phase transitions, water uptake and physical state. Aerosol hydration influences particle size, mass, optical and chemical properties, making it a key process in atmospheric science. This study evaluates the performance of ISORROPIA 2.1, a thermodynamic equilibrium model, in predicting aerosol water uptake across a wide range of aerosol types, including indoor and outdoor (urban, extra-urban and marine) aerosols and deposits on electrical insulators. Inorganic composition was determined by ion chromatography, while deliquescence behavior was experimentally characterized using an Aerosol Exposure Chamber, providing a comprehensive dataset for model validation. ISORROPIA 2.1 accurately reproduces deliquescence relative humidity (DRH) and hygroscopic growth in sulfate–nitrate–ammonium dominated systems, with mean deviations of 4.3 ± 2.6 % RH for the onset of deliquescence (DRHs) and 4.4 ± 3.2 % RH for completion (DRHe). In contrast, ammonium-poor mixtures enriched in alkali and alkaline-earth ions (K+, Mg2+, Ca2+, Na+), including marine aerosol and insulator deposits, show non-physical humidification behavior characterized by discontinuous liquid–solid transitions. These anomalies arise from routine-selection instabilities in dust-rich regimes. Targeted code refinements improved model stability and water-uptake predictions, extending the applicability of ISORROPIA 2.1 to sulfate-poor, sodium- and crustal-rich systems. Overall, this work provides an experimental benchmark for aerosol thermodynamics, identifies the compositional limits of ISORROPIA 2.1 and broadens its applicability to complex inorganic aerosol mixtures.

  • Open Access

    Comment on egusphere-2026-3968

    by Irene Gini, Mattia Borelli, Guido Pirovano, Alessandra Balzarini, Amedeo Manuel Cefalì, Ezio Giovanni Bolzacchini, Andrea Doldi, Ludovica Giovanazzi, Niccolò Losi, Luca Ferrero

    The hygroscopic behavior of atmospheric aerosols is controlled by their chemical composition, which determines phase transitions, water uptake and physical state. Aerosol hydration influences particle size, mass, optical and chemical properties, making it a key process in atmospheric science. This study evaluates the performance of ISORROPIA 2.1, a thermodynamic equilibrium model, in predicting aerosol water uptake across a wide range of aerosol types, including indoor and outdoor (urban, extra-urban and marine) aerosols and deposits on electrical insulators. Inorganic composition was determined by ion chromatography, while deliquescence behavior was experimentally characterized using an Aerosol Exposure Chamber, providing a comprehensive dataset for model validation. ISORROPIA 2.1 accurately reproduces deliquescence relative humidity (DRH) and hygroscopic growth in sulfate–nitrate–ammonium dominated systems, with mean deviations of 4.3 ± 2.6 % RH for the onset of deliquescence (DRHs) and 4.4 ± 3.2 % RH for completion (DRHe). In contrast, ammonium-poor mixtures enriched in alkali and alkaline-earth ions (K+, Mg2+, Ca2+, Na+), including marine aerosol and insulator deposits, show non-physical humidification behavior characterized by discontinuous liquid–solid transitions. These anomalies arise from routine-selection instabilities in dust-rich regimes. Targeted code refinements improved model stability and water-uptake predictions, extending the applicability of ISORROPIA 2.1 to sulfate-poor, sodium- and crustal-rich systems. Overall, this work provides an experimental benchmark for aerosol thermodynamics, identifies the compositional limits of ISORROPIA 2.1 and broadens its applicability to complex inorganic aerosol mixtures.

  • Open Access

    Comment on egusphere-2026-3968

    by Irene Gini, Mattia Borelli, Guido Pirovano, Alessandra Balzarini, Amedeo Manuel Cefalì, Ezio Giovanni Bolzacchini, Andrea Doldi, Ludovica Giovanazzi, Niccolò Losi, Luca Ferrero

    The hygroscopic behavior of atmospheric aerosols is controlled by their chemical composition, which determines phase transitions, water uptake and physical state. Aerosol hydration influences particle size, mass, optical and chemical properties, making it a key process in atmospheric science. This study evaluates the performance of ISORROPIA 2.1, a thermodynamic equilibrium model, in predicting aerosol water uptake across a wide range of aerosol types, including indoor and outdoor (urban, extra-urban and marine) aerosols and deposits on electrical insulators. Inorganic composition was determined by ion chromatography, while deliquescence behavior was experimentally characterized using an Aerosol Exposure Chamber, providing a comprehensive dataset for model validation. ISORROPIA 2.1 accurately reproduces deliquescence relative humidity (DRH) and hygroscopic growth in sulfate–nitrate–ammonium dominated systems, with mean deviations of 4.3 ± 2.6 % RH for the onset of deliquescence (DRHs) and 4.4 ± 3.2 % RH for completion (DRHe). In contrast, ammonium-poor mixtures enriched in alkali and alkaline-earth ions (K+, Mg2+, Ca2+, Na+), including marine aerosol and insulator deposits, show non-physical humidification behavior characterized by discontinuous liquid–solid transitions. These anomalies arise from routine-selection instabilities in dust-rich regimes. Targeted code refinements improved model stability and water-uptake predictions, extending the applicability of ISORROPIA 2.1 to sulfate-poor, sodium- and crustal-rich systems. Overall, this work provides an experimental benchmark for aerosol thermodynamics, identifies the compositional limits of ISORROPIA 2.1 and broadens its applicability to complex inorganic aerosol mixtures.

  • Open Access

    Evaluating the performance of the thermodynamic equilibrium model ISORROPIA 2.1 for different aerosol compositions

    by Irene Gini, Mattia Borelli, Guido Pirovano, Alessandra Balzarini, Amedeo Manuel Cefalì, Ezio Giovanni Bolzacchini, Andrea Doldi, Ludovica Giovanazzi, Niccolò Losi, Luca Ferrero

    The hygroscopic behavior of atmospheric aerosols is controlled by their chemical composition, which determines phase transitions, water uptake and physical state. Aerosol hydration influences particle size, mass, optical and chemical properties, making it a key process in atmospheric science. This study evaluates the performance of ISORROPIA 2.1, a thermodynamic equilibrium model, in predicting aerosol water uptake across a wide range of aerosol types, including indoor and outdoor (urban, extra-urban and marine) aerosols and deposits on electrical insulators. Inorganic composition was determined by ion chromatography, while deliquescence behavior was experimentally characterized using an Aerosol Exposure Chamber, providing a comprehensive dataset for model validation. ISORROPIA 2.1 accurately reproduces deliquescence relative humidity (DRH) and hygroscopic growth in sulfate–nitrate–ammonium dominated systems, with mean deviations of 4.3 ± 2.6 % RH for the onset of deliquescence (DRHs) and 4.4 ± 3.2 % RH for completion (DRHe). In contrast, ammonium-poor mixtures enriched in alkali and alkaline-earth ions (K+, Mg2+, Ca2+, Na+), including marine aerosol and insulator deposits, show non-physical humidification behavior characterized by discontinuous liquid–solid transitions. These anomalies arise from routine-selection instabilities in dust-rich regimes. Targeted code refinements improved model stability and water-uptake predictions, extending the applicability of ISORROPIA 2.1 to sulfate-poor, sodium- and crustal-rich systems. Overall, this work provides an experimental benchmark for aerosol thermodynamics, identifies the compositional limits of ISORROPIA 2.1 and broadens its applicability to complex inorganic aerosol mixtures.

  • Open Access

    Supplementary material to "Evaluating the performance of the thermodynamic equilibrium model ISORROPIA 2.1 for different aerosol compositions"

    by Irene Gini, Mattia Borelli, Guido Pirovano, Alessandra Balzarini, Amedeo Manuel Cefalì, Ezio Giovanni Bolzacchini, Andrea Doldi, Ludovica Giovanazzi, Niccolò Losi, Luca Ferrero