Penghui Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Penghui Cao has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
Chuanchang Li
6 shared publicationsJuan Yang
6 shared publicationsHuali Zhu
5 shared publicationsCan Chen
School of Metallurgy and Environment Central South University Changsha Hunan 410083 China
2 shared publications- Jingjing Tang
School of metallurgy and environment Central South University Changsha China
2 shared publications MengDi Wu
College of Energy and Power Engineering Changsha University of Science & Technology Changsha 410114 China
2 shared publications
Latest Publications
- Open Access
- 12 November 2026
- Published by OAE Publishing Inc. in Energy Materials
- Vol. 6 (11)
Interfacial coordination reconstruction via electrochemical phase transformation for stable zinc powder anodes
The practical development of aqueous zinc-ion batteries is hampered by the intrinsic thermodynamic instability of zinc powder anodes, where uncontrolled parasitic reactions and dendritic growth lead to rapid capacity decay. Conventional interfacial protection layers, whether pre-fabricated or in-situ formed, suffer from mechanical and chemical degradation under dynamic cycling conditions. Here, we report an interface regulation strategy based on an electrochemically driven phase transformation of copper oxalate (CuC2O4) embedded in the zinc powder electrode. Upon discharge, the CuC2O4 undergoes a structural reconstruction involving the conversion of C=O to C-O coordination environments and the partial reduction of Cu2+ to Cu+, as evidenced by multi-modal spectroscopy and X-ray photoelectron spectroscopy. This reconstructed interface, enriched with C-O groups and Cu+ sites, exhibits enhanced zinc affinity and water confinement, as quantified by density functional theory calculations, thereby suppressing parasitic hydrogen evolution and guiding uniform zinc deposition. As a result, the modified zinc powder anode (ZP@CuC2O4) delivers a stable cycling lifetime of approximately 600 h under high-rate conditions (7 mA cm-2/1 mAh cm-2) in symmetric cells and enables pouch-type full cells to deliver a cumulative capacity of 11.7 Ah after 1,000 cycles at 7 A g-1. This work demonstrates a paradigm of dynamic interfacial engineering through intrinsic phase-transition-induced coordination reconstruction, addressing a key barrier for practical zinc powder anodes.
- 12 November 2026
- Published by OAE Publishing Inc. in Energy Materials
- Vol. 6 (11)
Open AccessInterfacial coordination reconstruction via electrochemical phase transformation for stable zinc powder anodes
The practical development of aqueous zinc-ion batteries is hampered by the intrinsic thermodynamic instability of zinc powder anodes, where uncontrolled parasitic reactions and dendritic growth lead to rapid capacity decay. Conventional interfacial protection layers, whether pre-fabricated or in-situ formed, suffer from mechanical and chemical degradation under dynamic cycling conditions. Here, we report an interface regulation strategy based on an electrochemically driven phase transformation of copper oxalate (CuC2O4) embedded in the zinc powder electrode. Upon discharge, the CuC2O4 undergoes a structural reconstruction involving the conversion of C=O to C-O coordination environments and the partial reduction of Cu2+ to Cu+, as evidenced by multi-modal spectroscopy and X-ray photoelectron spectroscopy. This reconstructed interface, enriched with C-O groups and Cu+ sites, exhibits enhanced zinc affinity and water confinement, as quantified by density functional theory calculations, thereby suppressing parasitic hydrogen evolution and guiding uniform zinc deposition. As a result, the modified zinc powder anode (ZP@CuC2O4) delivers a stable cycling lifetime of approximately 600 h under high-rate conditions (7 mA cm-2/1 mAh cm-2) in symmetric cells and enables pouch-type full cells to deliver a cumulative capacity of 11.7 Ah after 1,000 cycles at 7 A g-1. This work demonstrates a paradigm of dynamic interfacial engineering through intrinsic phase-transition-induced coordination reconstruction, addressing a key barrier for practical zinc powder anodes.
- Open Access
- 1 November 2026
- Published by KEAI Publishing in Advanced Powder Materials
Interfacial Field Coherence Enables Stable Zn Powder Anodes in Temperature-Resilient Aqueous Batteries
- 1 November 2026
- Published by KEAI Publishing in Advanced Powder Materials
Open AccessInterfacial Field Coherence Enables Stable Zn Powder Anodes in Temperature-Resilient Aqueous Batteries
- Open Access
- 3 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (82) , e78136
Architecting Zincophilic‐Hydrophobic Domains Within Co‐Crosslinked Hydrogels for All‐Climate Aqueous Zinc‐Ion Batteries
Aqueous zinc‐ion batteries with hydrogel electrolytes have attracted considerable attention for wearable energy‐storage devices owing to their intrinsic safety and mechanical flexibility. However, conventional hydrogel electrolytes often exhibit limited rate capability and environmental adaptability, which are closely related to the decoupled regulation of ion transport and interfacial chemistry. To overcome these limitations, a spatially cooperative electrolyte‐engineering approach was developed through constructing a co‐crosslinked network ( p (AM‐ co ‐VIB)) through the copolymerization of acrylamide (AM) and 1‐vinyl‐3‐butylimidazolium bromide (VIB), while introducing 3‐(N,N‐dimethylmyristylammonio) propane sulfonate (ST) to construct a hydrogel electrolyte (PV‐S). The p (AM‐ co ‐VIB) network provides efficient ion‐transport pathways and structural robustness, while the ST‐derived zincophilic‐hydrophobic domains regulate the local Zn 2+ coordination environment, promoting homogeneous Zn 2+ distribution and confining interfacial water. Consequently, the PV‐S electrolyte delivers an average coulombic efficiency of 99.57%. Furthermore, the Zn||Zn symmetric cells sustain highly reversible Zn plating/stripping across a broad current‐density range of 1–40 mA cm −2 . Notably, stable operation can be maintained over a wide temperature window (−40°C to 80°C), with prolonged cycling exceeding 2800 h at −20°C. Additionally, the Zn||NVO full cell retains 82.4% capacity retention over 850 cycles. Remarkably, the Zn||NVO pouch cell with a limited N/P ratio (3.9) retains 92.1% capacity after 220 cycles.
- 3 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (82) , e78136
Open AccessArchitecting Zincophilic‐Hydrophobic Domains Within Co‐Crosslinked Hydrogels for All‐Climate Aqueous Zinc‐Ion Batteries
Aqueous zinc‐ion batteries with hydrogel electrolytes have attracted considerable attention for wearable energy‐storage devices owing to their intrinsic safety and mechanical flexibility. However, conventional hydrogel electrolytes often exhibit limited rate capability and environmental adaptability, which are closely related to the decoupled regulation of ion transport and interfacial chemistry. To overcome these limitations, a spatially cooperative electrolyte‐engineering approach was developed through constructing a co‐crosslinked network ( p (AM‐ co ‐VIB)) through the copolymerization of acrylamide (AM) and 1‐vinyl‐3‐butylimidazolium bromide (VIB), while introducing 3‐(N,N‐dimethylmyristylammonio) propane sulfonate (ST) to construct a hydrogel electrolyte (PV‐S). The p (AM‐ co ‐VIB) network provides efficient ion‐transport pathways and structural robustness, while the ST‐derived zincophilic‐hydrophobic domains regulate the local Zn 2+ coordination environment, promoting homogeneous Zn 2+ distribution and confining interfacial water. Consequently, the PV‐S electrolyte delivers an average coulombic efficiency of 99.57%. Furthermore, the Zn||Zn symmetric cells sustain highly reversible Zn plating/stripping across a broad current‐density range of 1–40 mA cm −2 . Notably, stable operation can be maintained over a wide temperature window (−40°C to 80°C), with prolonged cycling exceeding 2800 h at −20°C. Additionally, the Zn||NVO full cell retains 82.4% capacity retention over 850 cycles. Remarkably, the Zn||NVO pouch cell with a limited N/P ratio (3.9) retains 92.1% capacity after 220 cycles.
- 26 July 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (5)
A High‐Stability Zinc Powder Anode Built on the Similarity Compatibility Principle
The high thermodynamic activity of zinc powder anodes leads to severe side reactions and hydrogen evolution in aqueous zinc‐ion batteries, which hinders their practical application. This study presents a novel strategy for constructing highly stable zinc powder anodes based on the “similarity‐compatible” design principle. By exploiting the morphological and structural similarity between flake‐type zinc powder and flake graphite, a zinc‐carbon anode (ZP@FG) with excellent interfacial compatibility is developed, leading to significantly enhanced electrochemical stability. Electrochemical analyses and simulations demonstrate that ZP@FG provides a stable interface, reduces parasitic side reactions, suppresses dendrite formation, and ensures uniform zinc deposition by effectively modulating the local electric field distribution. Notably, symmetric cells employing ZP@FG electrodes achieved exceptionally prolonged cycling lifetimes exceeding 790 h at 1 mA cm −2 . Full cells coupled with a V₂O₅ cathode exhibited outstanding capacity retention, maintaining over 130 mAh g −1 after 2400 cycles at 7 A g −1 . Moreover, pouch‐type cells using high‐mass‐loading electrodes (18 mg cm −2 ) operated steadily for over 330 cycles, delivering a cumulative capacity of 25.3 Ah, highlighting significant potential for practical implementation. This work provides crucial insights and a scalable approach toward high‐performance, long‐lifespan zinc anodes suitable for commercialization.
- 26 July 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (5)
A High‐Stability Zinc Powder Anode Built on the Similarity Compatibility Principle
The high thermodynamic activity of zinc powder anodes leads to severe side reactions and hydrogen evolution in aqueous zinc‐ion batteries, which hinders their practical application. This study presents a novel strategy for constructing highly stable zinc powder anodes based on the “similarity‐compatible” design principle. By exploiting the morphological and structural similarity between flake‐type zinc powder and flake graphite, a zinc‐carbon anode (ZP@FG) with excellent interfacial compatibility is developed, leading to significantly enhanced electrochemical stability. Electrochemical analyses and simulations demonstrate that ZP@FG provides a stable interface, reduces parasitic side reactions, suppresses dendrite formation, and ensures uniform zinc deposition by effectively modulating the local electric field distribution. Notably, symmetric cells employing ZP@FG electrodes achieved exceptionally prolonged cycling lifetimes exceeding 790 h at 1 mA cm −2 . Full cells coupled with a V₂O₅ cathode exhibited outstanding capacity retention, maintaining over 130 mAh g −1 after 2400 cycles at 7 A g −1 . Moreover, pouch‐type cells using high‐mass‐loading electrodes (18 mg cm −2 ) operated steadily for over 330 cycles, delivering a cumulative capacity of 25.3 Ah, highlighting significant potential for practical implementation. This work provides crucial insights and a scalable approach toward high‐performance, long‐lifespan zinc anodes suitable for commercialization.
- 7 January 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (10)
Designing Antifreeze Electrolytes with Colloid‐Like Structures for High‐Rate Performance in Aqueous Zinc‐Ion Batteries
Optimizing the electrolyte configuration is an effective strategy to enhance the cycle life of aqueous zinc‐ion batteries (AZIBs). A critical challenge in electrolyte development involves improving the antifreeze characteristics without compromising high‐rate performance for the AZIBs. This study selects the polymer polysaccharide konjac glucomannan (KGM) as an electrolyte additive, aiming to utilize its naturally formed stable colloidal system in aqueous solution, which exhibits superior rheological properties. This system can effectively balance the antifreeze performance of the electrolyte with the performance requirements of the cell under high‐rate charge–discharge conditions, thereby enhancing the overall performance of the cell. Therefore, the zinc anode exhibits stable cycling for 1250 h at 25 °C under conditions of 7 mA cm−2 and 3.5 mAh cm−2. At ‐10 °C, stable cycling is sustained for over 800 h at 7 mA cm−2 and 1 mAh cm−2. In full cells, the cell delivers a discharge capacity of 77.9 mAh g−1 after 7500 cycles at a current density of 15 A g−1 at 25 °C. Even at ‐10 °C, the cell delivers a discharge capacity of 102.7 mAh g−1 after 660 cycles at 3 A g−1. KGM offers a cost‐effective, environmentally friendly solution to improve AZIBs' reliability and antifreeze capabilities.
- 7 January 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (10)
Designing Antifreeze Electrolytes with Colloid‐Like Structures for High‐Rate Performance in Aqueous Zinc‐Ion Batteries
Optimizing the electrolyte configuration is an effective strategy to enhance the cycle life of aqueous zinc‐ion batteries (AZIBs). A critical challenge in electrolyte development involves improving the antifreeze characteristics without compromising high‐rate performance for the AZIBs. This study selects the polymer polysaccharide konjac glucomannan (KGM) as an electrolyte additive, aiming to utilize its naturally formed stable colloidal system in aqueous solution, which exhibits superior rheological properties. This system can effectively balance the antifreeze performance of the electrolyte with the performance requirements of the cell under high‐rate charge–discharge conditions, thereby enhancing the overall performance of the cell. Therefore, the zinc anode exhibits stable cycling for 1250 h at 25 °C under conditions of 7 mA cm−2 and 3.5 mAh cm−2. At ‐10 °C, stable cycling is sustained for over 800 h at 7 mA cm−2 and 1 mAh cm−2. In full cells, the cell delivers a discharge capacity of 77.9 mAh g−1 after 7500 cycles at a current density of 15 A g−1 at 25 °C. Even at ‐10 °C, the cell delivers a discharge capacity of 102.7 mAh g−1 after 660 cycles at 3 A g−1. KGM offers a cost‐effective, environmentally friendly solution to improve AZIBs' reliability and antifreeze capabilities.
- 31 July 2024
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 99, 139-148
Stabilization of flake Zn powder anodes via designing functional additives in electrolytes for aqueous Zn ion batteries
- 31 July 2024
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 99, 139-148
Stabilization of flake Zn powder anodes via designing functional additives in electrolytes for aqueous Zn ion batteries
- 24 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (2) , 479-486
Dimensionality Reduction Engineering to Construct a Highly Stable Zn Powder Anode in Aqueous Zn-Ion Batteries
- 24 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (2) , 479-486
Dimensionality Reduction Engineering to Construct a Highly Stable Zn Powder Anode in Aqueous Zn-Ion Batteries
- 22 November 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (1) , 277-285
Advanced electrolyte with high stability and low-temperature resistance for zinc-ion batteries
Aqueous zinc-ion batteries (AZIBs) are considered to be a green and safe energy storage system. However, electrolyte leakage, zinc dendrite growth and side reactions are still barriers to their practical application. A quasi-solid sodium alginate gel electrolyte (GE) was designed to alleviate these pain points. To further stabilize the water molecules in this GE and extend its application to subzero temperatures, a disaccharide called trehalose (TreH) was introduced as a multifunctional additive. The rational introduction of TreH notably improved the strength (186.6 kPa) of the sodium alginate GE while retaining a high ionic conductivity (22.4 mS cm−1) at 25 °C. The zinc–polyaniline full battery assembled with this composite GE exhibited a capacity retention of 70.4% after 500 cycles at 25 °C, and still delivered a reversible capacity of 120.6 mA h g−1 at −20 °C. These results show that the sodium alginate GE with trehalose as an additive has great potential for development in AZIBs.
- 22 November 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (1) , 277-285
Advanced electrolyte with high stability and low-temperature resistance for zinc-ion batteries
Aqueous zinc-ion batteries (AZIBs) are considered to be a green and safe energy storage system. However, electrolyte leakage, zinc dendrite growth and side reactions are still barriers to their practical application. A quasi-solid sodium alginate gel electrolyte (GE) was designed to alleviate these pain points. To further stabilize the water molecules in this GE and extend its application to subzero temperatures, a disaccharide called trehalose (TreH) was introduced as a multifunctional additive. The rational introduction of TreH notably improved the strength (186.6 kPa) of the sodium alginate GE while retaining a high ionic conductivity (22.4 mS cm−1) at 25 °C. The zinc–polyaniline full battery assembled with this composite GE exhibited a capacity retention of 70.4% after 500 cycles at 25 °C, and still delivered a reversible capacity of 120.6 mA h g−1 at −20 °C. These results show that the sodium alginate GE with trehalose as an additive has great potential for development in AZIBs.