Monika Łazor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Monika Łazor has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Eugene N. Naumovich
Institute of Power Engineering - National Research Insitute
5 shared publications - Leszek Ajdys
Institute of Power Engineering - National Research Institute
5 shared publications Agnieszka Żurawska
Institute of Power Engineering - National Research Institute
2 shared publications- Agnieszka Żurawska
Institute of Power Engineering, Mory 8, 01-330 Warsaw, Poland
2 shared publications - Aliaksandr Martsinchyk
Politechnika Warszawska, Warszawa, Poland
2 shared publications Anna Niemczyk
Institute of Power Engineering - National Research Institute
2 shared publications
Latest Publications
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-03 (1) , 198
Large-Scale Hydrogen Production in MW-Class Solid Oxide Electrolyzers Integrated with Industrial Processes – Case Study of MEGA-SOE Project
Recent years were focused on various aspects of solid oxide electrolyzers in order to advance the technology by increasing durability and performance, and reducing fabrication time, process waste as well the cost. Continuous development is an integral part of scaling-up of the technology which currently seeks first large-scale industrial deployments. There are only several megawatt-scale solid oxide electrolysis plants, and more are to come. Among others, MEGA-SOE project which is a joint activity of ORLEN and the Institute of Power Engineering – National Research Institute should be noted. It focuses on5 MW-class easy to deploy and modular solid oxide electrolysis unit. These activities are based on a 5 kW SOC stack show in Fig. 1 which is a building block of systems discussed in the work. SOE offer a great advantage over other types of electrolyzers as they can be thermally integrated with various process in order to benefit from the available external source of steam and/or heat which adds to the performance of the process. In order to lower cost of SOC, the team at the Center for Hydrogen Technologies at the Institute of Power Engineering – National Research Institute incorporated additive manufacturing and low-cost of fabrication. The composite seals which are used in the stack are based on 3D printing, and ceramic support of solid oxide electrochemical cells are produced using high pressure injection molding. Article discussed these methods in the light of reduction of process waste and fabrication time. Additionally, introduction of composite electrodes and alternative materials for coatings which aid in gradual elimination of Cobal from SOC stack are discussed. MEGA-SOE is built on earlier experience and cooperation between IPE-NRI and ORLEN in frame of HYDROGIN (Fig. 2) and VETNI (Fig. 3) project which deliver 10 kW rSOC integrated with biomass boiler and 30 kW-class SOE integrated with refining process. Currently, 400 kW rSOC is under construction and the project ultimately seeks for a 5 MW unit to be integrated with refining plant in Gdansk, Poland. The article discusses key technical challenges as well current performance of modules which are used in large-scale systems, including operation both in electrolysis and reversible mode. In the work selected novelties introduced at the level of layers and coatings for increasing durability of solid oxide cells are presented and discussed, therefore work is a comprehensive review of recent advanced and technology scale-up. Fig. 1 5 kW SOC stack by the Institute of Power Engineering – National Research Institute. Fig. 2 10 kW rSOC HYDROGIN system integrated with power plant in Elbląg, Poland Fig. 3 30 kW SOE VETNI system integrated with refining plant in Jasło, Poland Fig. 4 Visualization of 5 MW SOE MEGA-SOE system (under construction) Acknowledgments The presented research was financially supported by the National Centre for Research and Development under MEGA-SOE project, grant agreement NTE-I/0022/2021-00. Figure 1 Figure 2
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-03 (1) , 198
Large-Scale Hydrogen Production in MW-Class Solid Oxide Electrolyzers Integrated with Industrial Processes – Case Study of MEGA-SOE Project
Recent years were focused on various aspects of solid oxide electrolyzers in order to advance the technology by increasing durability and performance, and reducing fabrication time, process waste as well the cost. Continuous development is an integral part of scaling-up of the technology which currently seeks first large-scale industrial deployments. There are only several megawatt-scale solid oxide electrolysis plants, and more are to come. Among others, MEGA-SOE project which is a joint activity of ORLEN and the Institute of Power Engineering – National Research Institute should be noted. It focuses on5 MW-class easy to deploy and modular solid oxide electrolysis unit. These activities are based on a 5 kW SOC stack show in Fig. 1 which is a building block of systems discussed in the work. SOE offer a great advantage over other types of electrolyzers as they can be thermally integrated with various process in order to benefit from the available external source of steam and/or heat which adds to the performance of the process. In order to lower cost of SOC, the team at the Center for Hydrogen Technologies at the Institute of Power Engineering – National Research Institute incorporated additive manufacturing and low-cost of fabrication. The composite seals which are used in the stack are based on 3D printing, and ceramic support of solid oxide electrochemical cells are produced using high pressure injection molding. Article discussed these methods in the light of reduction of process waste and fabrication time. Additionally, introduction of composite electrodes and alternative materials for coatings which aid in gradual elimination of Cobal from SOC stack are discussed. MEGA-SOE is built on earlier experience and cooperation between IPE-NRI and ORLEN in frame of HYDROGIN (Fig. 2) and VETNI (Fig. 3) project which deliver 10 kW rSOC integrated with biomass boiler and 30 kW-class SOE integrated with refining process. Currently, 400 kW rSOC is under construction and the project ultimately seeks for a 5 MW unit to be integrated with refining plant in Gdansk, Poland. The article discusses key technical challenges as well current performance of modules which are used in large-scale systems, including operation both in electrolysis and reversible mode. In the work selected novelties introduced at the level of layers and coatings for increasing durability of solid oxide cells are presented and discussed, therefore work is a comprehensive review of recent advanced and technology scale-up. Fig. 1 5 kW SOC stack by the Institute of Power Engineering – National Research Institute. Fig. 2 10 kW rSOC HYDROGIN system integrated with power plant in Elbląg, Poland Fig. 3 30 kW SOE VETNI system integrated with refining plant in Jasło, Poland Fig. 4 Visualization of 5 MW SOE MEGA-SOE system (under construction) Acknowledgments The presented research was financially supported by the National Centre for Research and Development under MEGA-SOE project, grant agreement NTE-I/0022/2021-00. Figure 1 Figure 2
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-03 (1) , 150
Characterization of the SOC Interconnect Materials in Dual-Atmospheric Conditions: Preliminary Results
Commercialization of solid oxide cell-based devices requires the introduction of low-cost and abundant materials to decrease production expenses. One of the bottlenecks in state-of-the-art SOFC and SOE stacks design is an interconnect steel. While Crofer 22APU from VDM Metals, Acerinox is the dedicated and proven solution, it is expensive and not readily available in large amounts. The known alternative includes less specific ferritic steels, namely AISI 441 and AISI 444, and widespread AISI 430. Substitution of the Crofer 22APU with alternative steels requires a thorough investigation of the novel protective layers on the air side and the stability of the interconnect exposed to the DC under high drops of oxygen and hydrogen chemical potentials. The dedicated test rig was developed and built in the Institute of Power Engineering – National Research Institute (IEN-PIB) for the dual-atmosphere studies of the ASR on stacked steel samples. In this rig the investigated samples can be assembled in the pseudo-stack with up to 14 steel-to-steel interfaces and a visible contact surface of 3x3 cm 2 (direct contact area ~2.4 cm 2 ). Half of the samples are corrugated in a manner that should represent the shape of the real interconnects. Pseudo-stack is sealed with mica-glass composite and operated being fed with air and with the 50 vol.% H 2 O-50 vol.% H 2 mixture. Usage of the LSCF as a contact helper allows trap the volatile Cr compound in case of the misfunction of the protective layer for the further analysis. The test rig supports the application of the current up to 30 A and continuous long-term operation (+ 1000 h). Preliminary tests demonstrated that at reference samples ASRs stay on the air side of the level of 10-15 mΩ*cm 2 and for the fuel side observed values are below 0.5 mΩ*cm 2 with minor degradation after 200 h of measurements at 700 °C. Work was supported by the National Science Centre NCN, Poland, grant UMO-2023/49/B/ST8/03265.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-03 (1) , 150
Characterization of the SOC Interconnect Materials in Dual-Atmospheric Conditions: Preliminary Results
Commercialization of solid oxide cell-based devices requires the introduction of low-cost and abundant materials to decrease production expenses. One of the bottlenecks in state-of-the-art SOFC and SOE stacks design is an interconnect steel. While Crofer 22APU from VDM Metals, Acerinox is the dedicated and proven solution, it is expensive and not readily available in large amounts. The known alternative includes less specific ferritic steels, namely AISI 441 and AISI 444, and widespread AISI 430. Substitution of the Crofer 22APU with alternative steels requires a thorough investigation of the novel protective layers on the air side and the stability of the interconnect exposed to the DC under high drops of oxygen and hydrogen chemical potentials. The dedicated test rig was developed and built in the Institute of Power Engineering – National Research Institute (IEN-PIB) for the dual-atmosphere studies of the ASR on stacked steel samples. In this rig the investigated samples can be assembled in the pseudo-stack with up to 14 steel-to-steel interfaces and a visible contact surface of 3x3 cm 2 (direct contact area ~2.4 cm 2 ). Half of the samples are corrugated in a manner that should represent the shape of the real interconnects. Pseudo-stack is sealed with mica-glass composite and operated being fed with air and with the 50 vol.% H 2 O-50 vol.% H 2 mixture. Usage of the LSCF as a contact helper allows trap the volatile Cr compound in case of the misfunction of the protective layer for the further analysis. The test rig supports the application of the current up to 30 A and continuous long-term operation (+ 1000 h). Preliminary tests demonstrated that at reference samples ASRs stay on the air side of the level of 10-15 mΩ*cm 2 and for the fuel side observed values are below 0.5 mΩ*cm 2 with minor degradation after 200 h of measurements at 700 °C. Work was supported by the National Science Centre NCN, Poland, grant UMO-2023/49/B/ST8/03265.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-03 (1) , 454
Optimization Studies of SOC Stack Interconnects Using the Cobalt-Free Protective Coating and Steel Pre-Oxidation
Interconnects are pivotal components in solid oxide electrochemical cell (SOC) stacks, responsible for i.e. the uniform gases distribution and electrical contact between the adjacent cells. These elements are fabricated from ferritic stainless steels (FSS) with 20% or more chromium content and additional alloying elements. FSS offers i.e. superior mechanical properties, ease of manufacturing, a low area-specific resistance (ASR) under 0.1 Ω·cm² or coefficient of thermal expansion (CTE) compatibility with other SOC stack components. However, with regard to elevated operating SOC devices temperatures (600 - 1000°C) and simultaneous exposure to both oxidizing and reducing atmospheres ("dual atmosphere" exposure), FSS as interconnects presents significant challenges. Under high-temperature operating conditions, a protective chromium oxide (Cr₂O₃) scale forms outwards from the substrate as well as inwards, which, while initially beneficial, thickens over time from an already thin element. During prolonged stack operation, the chromium content can diminish below a critical threshold, leading to breakaway oxidation and significantly compromising interconnect durability. Additionally, at elevated temperatures and in the presence of water vapour, chromium can form volatile compounds such as CrO₃ and CrO₂(OH)₂. These species can migrate to the cathode, depositing as solid Cr(III) oxides, and cause a phenomenon known as "cathode poisoning," which accelerates the degradation of the cell. Under high pO 2 , FSS forms a semiconductive bi-layered oxide scale: a dense Cr₂O₃ layer beneath an external MnCr₂O₄ spinel surface. This structure reduces the diffusion of volatile chromium species but also increases ASR values. To mitigate these issues, various surface modification techniques have been developed. Studies have shown that combining pre-oxidation of the steel in controlled environment with the application of a protective coating can significantly improve corrosion resistance and reduce the electrical resistance of the interconnect during prolonged SOC operation. With reference to the abovementioned, the present study investigates the impact of pre-oxidation on the properties of protective coatings applied to Crofer 22APU, a state-of-the-art ferritic steel utilized in SOC applications. As a method for coatings applying, there was selected electrophoretic deposition (EPD), allowing for uniform coverage of the complex-shaped surfaces with a thin ceramic layer. For studies, in the function of protective layers, a commercially available cobalt-free material CuMn 1.9 Fe 0.1 O 4 (CMF) was used. The conducted low-intensity XRD of as-obtained CMF powder revealed its dual phase composition consisted of mainly cubic spinel phase: CuMn 2 O 4 and also tetragonal spinel-type oxide Mn 3 O 4 (hausmannite). In addition, it has been verified that the sintering with the use of a reductive atmosphere and further annealing of the coatings based on this material cause a change of hausmannite to bixbyite (Mn,Fe) 2 O 3 . Hence, the conducted research was concerned with verifying the effect of additional thermal treatment of the steel substrate depending on the used temperature dwell (600-850°C) in air on properties of bi-phased CMF coatings. Moreover, since Crofer 22APU is a specialized and expensive steel grade, the study attempted to replace this type of FSS with another, low-cost one e.g. AISI 430, K41 or K44X. As in the case of Crofer 22APU, the alternative steels were pre-oxidized under conditions selected by previous studies and electrophoretically coated with a CMF-based layer. The parameters of protective coatings deposited on various steel substrates were verified by mid-term ASR measurements conducted under conditions similar to SOC system operation in air. In addition, the surface microstructure of the pre-oxidized steel and formed coatings as well as the contact between coatings and steel were evaluated by the SEM technique. SEM results also allowed estimating the thickness of the bilayer scale: Cr 2 O 3 and (Mn,Cr) 3 O 4 after deposition and sintering of the protective coating but also after ASR measurements. This provided comparison of the oxygen scale growth for selected variants of pre-oxidation of the steel substrate. The studied coatings applied on pre-oxidized steel specimens were also checked for ability of CrO x trapping along their cross-sections using EDS method. Authors would like to acknowledge financial support from the National Science Centre Poland within the OPUS project no: UMO-2023/49/B/ST8/03265.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-03 (1) , 454
Optimization Studies of SOC Stack Interconnects Using the Cobalt-Free Protective Coating and Steel Pre-Oxidation
Interconnects are pivotal components in solid oxide electrochemical cell (SOC) stacks, responsible for i.e. the uniform gases distribution and electrical contact between the adjacent cells. These elements are fabricated from ferritic stainless steels (FSS) with 20% or more chromium content and additional alloying elements. FSS offers i.e. superior mechanical properties, ease of manufacturing, a low area-specific resistance (ASR) under 0.1 Ω·cm² or coefficient of thermal expansion (CTE) compatibility with other SOC stack components. However, with regard to elevated operating SOC devices temperatures (600 - 1000°C) and simultaneous exposure to both oxidizing and reducing atmospheres ("dual atmosphere" exposure), FSS as interconnects presents significant challenges. Under high-temperature operating conditions, a protective chromium oxide (Cr₂O₃) scale forms outwards from the substrate as well as inwards, which, while initially beneficial, thickens over time from an already thin element. During prolonged stack operation, the chromium content can diminish below a critical threshold, leading to breakaway oxidation and significantly compromising interconnect durability. Additionally, at elevated temperatures and in the presence of water vapour, chromium can form volatile compounds such as CrO₃ and CrO₂(OH)₂. These species can migrate to the cathode, depositing as solid Cr(III) oxides, and cause a phenomenon known as "cathode poisoning," which accelerates the degradation of the cell. Under high pO 2 , FSS forms a semiconductive bi-layered oxide scale: a dense Cr₂O₃ layer beneath an external MnCr₂O₄ spinel surface. This structure reduces the diffusion of volatile chromium species but also increases ASR values. To mitigate these issues, various surface modification techniques have been developed. Studies have shown that combining pre-oxidation of the steel in controlled environment with the application of a protective coating can significantly improve corrosion resistance and reduce the electrical resistance of the interconnect during prolonged SOC operation. With reference to the abovementioned, the present study investigates the impact of pre-oxidation on the properties of protective coatings applied to Crofer 22APU, a state-of-the-art ferritic steel utilized in SOC applications. As a method for coatings applying, there was selected electrophoretic deposition (EPD), allowing for uniform coverage of the complex-shaped surfaces with a thin ceramic layer. For studies, in the function of protective layers, a commercially available cobalt-free material CuMn 1.9 Fe 0.1 O 4 (CMF) was used. The conducted low-intensity XRD of as-obtained CMF powder revealed its dual phase composition consisted of mainly cubic spinel phase: CuMn 2 O 4 and also tetragonal spinel-type oxide Mn 3 O 4 (hausmannite). In addition, it has been verified that the sintering with the use of a reductive atmosphere and further annealing of the coatings based on this material cause a change of hausmannite to bixbyite (Mn,Fe) 2 O 3 . Hence, the conducted research was concerned with verifying the effect of additional thermal treatment of the steel substrate depending on the used temperature dwell (600-850°C) in air on properties of bi-phased CMF coatings. Moreover, since Crofer 22APU is a specialized and expensive steel grade, the study attempted to replace this type of FSS with another, low-cost one e.g. AISI 430, K41 or K44X. As in the case of Crofer 22APU, the alternative steels were pre-oxidized under conditions selected by previous studies and electrophoretically coated with a CMF-based layer. The parameters of protective coatings deposited on various steel substrates were verified by mid-term ASR measurements conducted under conditions similar to SOC system operation in air. In addition, the surface microstructure of the pre-oxidized steel and formed coatings as well as the contact between coatings and steel were evaluated by the SEM technique. SEM results also allowed estimating the thickness of the bilayer scale: Cr 2 O 3 and (Mn,Cr) 3 O 4 after deposition and sintering of the protective coating but also after ASR measurements. This provided comparison of the oxygen scale growth for selected variants of pre-oxidation of the steel substrate. The studied coatings applied on pre-oxidized steel specimens were also checked for ability of CrO x trapping along their cross-sections using EDS method. Authors would like to acknowledge financial support from the National Science Centre Poland within the OPUS project no: UMO-2023/49/B/ST8/03265.
- Open Access
Degradation and Corrosion of Metal Components in High-Temperature Fuel Cells and Electrolyzers: Review of Protective Approaches
High-temperature fuel cells and electrolyzers, particularly molten carbonate fuel cells (MCFCs) and Molten Carbonate Electrolyzers (MCEs), are expected to play a critical role in clean power generation, hydrogen production, and integrated CO2 separation. Unfortunately, despite their potential, these technologies have not yet reached full commercialization. The main reason for this is material degradation. In particular, the corrosion of metallic components continues to be a leading cause of performance loss and system failure. This review provides a comprehensive assessment of degradation mechanisms in MCFC and MCE systems. It examines key metallic components, such as current collectors and bipolar plates, focusing on the performance of commonly used materials, including stainless steels and advanced alloys, under prolonged exposure to corrosive environments. To address degradation issues, this review evaluates current mitigation strategies and discusses material selection, protective coatings application, and the optimization of operational parameters. Advances in alloy development, coatings, surface treatments, and process controls have been compared in terms of effectiveness, scalability, and long-term stability. The review concludes with a synthesis of current best practices and future directions, emphasizing the need for integrated, multi-functional solutions to achieve the lifetimes required for full commercialization. By linking materials science, electrochemistry, and systems engineering, this review offers directions for the development of corrosion-resistant MCFC and MCE technologies in support of a hydrogen-based, carbon-neutral energy future.
Open AccessDegradation and Corrosion of Metal Components in High-Temperature Fuel Cells and Electrolyzers: Review of Protective Approaches
High-temperature fuel cells and electrolyzers, particularly molten carbonate fuel cells (MCFCs) and Molten Carbonate Electrolyzers (MCEs), are expected to play a critical role in clean power generation, hydrogen production, and integrated CO2 separation. Unfortunately, despite their potential, these technologies have not yet reached full commercialization. The main reason for this is material degradation. In particular, the corrosion of metallic components continues to be a leading cause of performance loss and system failure. This review provides a comprehensive assessment of degradation mechanisms in MCFC and MCE systems. It examines key metallic components, such as current collectors and bipolar plates, focusing on the performance of commonly used materials, including stainless steels and advanced alloys, under prolonged exposure to corrosive environments. To address degradation issues, this review evaluates current mitigation strategies and discusses material selection, protective coatings application, and the optimization of operational parameters. Advances in alloy development, coatings, surface treatments, and process controls have been compared in terms of effectiveness, scalability, and long-term stability. The review concludes with a synthesis of current best practices and future directions, emphasizing the need for integrated, multi-functional solutions to achieve the lifetimes required for full commercialization. By linking materials science, electrochemistry, and systems engineering, this review offers directions for the development of corrosion-resistant MCFC and MCE technologies in support of a hydrogen-based, carbon-neutral energy future.
- Open Access
- 1 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 120, 613-627
Functional properties of CuMn1.9Fe0.1O4-based coatings deposited on Crofer 22 APU steel exposed to selected pre-oxidation conditions
- 1 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 120, 613-627
Open AccessFunctional properties of CuMn1.9Fe0.1O4-based coatings deposited on Crofer 22 APU steel exposed to selected pre-oxidation conditions
- Open Access
- 26 February 2024
- Published by Elsevier in Journal of Environmental Management
- Vol. 354, 120425
Feasibility study and techno-economic assessment of power-to-gas (P2G) technology based on solid oxide electrolysis (SOE)
- 26 February 2024
- Published by Elsevier in Journal of Environmental Management
- Vol. 354, 120425
Open AccessFeasibility study and techno-economic assessment of power-to-gas (P2G) technology based on solid oxide electrolysis (SOE)
- 1 January 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications)
- p. 129-132
Hyflow – a Novel System for E-Fuel Synthesis
HYFLOW is a system promoting the expansion of low-carbon energy sources, perfectly in line with the objectives of the latest EU climate improvement regulations. The concept of the project is Power-to-Fuel (PTF) conversion, which will thus enable the production of low- or even zero-emission synthetic fuels so-called e-fuels with high energy density, a wide range of applications and closed-loop CO2 emissions. The technology is based on a revolutionary approach involving the integration of a high-temperature co-electrolysis system together with a Fischer-Tropsch (F-T) reactor for the synthesis of liquid fuels, with a view to utilizing the energy and CO2 from the combustion of e-fuels in a closed loop. The HYFLOW project is being developed by researchers from the Warsaw University of Technology, consisting of: Arkadiusz Baran, Katsiaryna Martsinchyk, Monika Lazor, Pavel Shuhayeu headed by team leader Aliaksandr Martsinchyk at the Faculty of Power and Aerospace Engineering.
- 1 January 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications)
- p. 129-132
Hyflow – a Novel System for E-Fuel Synthesis
HYFLOW is a system promoting the expansion of low-carbon energy sources, perfectly in line with the objectives of the latest EU climate improvement regulations. The concept of the project is Power-to-Fuel (PTF) conversion, which will thus enable the production of low- or even zero-emission synthetic fuels so-called e-fuels with high energy density, a wide range of applications and closed-loop CO2 emissions. The technology is based on a revolutionary approach involving the integration of a high-temperature co-electrolysis system together with a Fischer-Tropsch (F-T) reactor for the synthesis of liquid fuels, with a view to utilizing the energy and CO2 from the combustion of e-fuels in a closed loop. The HYFLOW project is being developed by researchers from the Warsaw University of Technology, consisting of: Arkadiusz Baran, Katsiaryna Martsinchyk, Monika Lazor, Pavel Shuhayeu headed by team leader Aliaksandr Martsinchyk at the Faculty of Power and Aerospace Engineering.
- 1 January 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications)
- p. 137
Investigation of the Co-Free Spinel Used in a Role of Protective Layers in Soc Application
Interconnects have a significant role in the SOC (Solid Oxide Cell) stacks. These elements provide electrical contact by the transfer of electrons between adjacent cells, while simultaneously preventing the mixing of fuel and oxidant streams. Typically, interconnects are composed of ferritic steel with high chromium content that can result in the growth of an oxide layer on the steel surface and the evaporation of harmful volatile chromium compounds directly impacting on the air electrode. This phenomenon leads to a loss of the stack performance. In order to prevent degradation of SOC stacks caused by CrOx volatility, their surface is covered with special ceramic protective layers. Additionally, the coating should have a low area specific resistance (ASR), uniformity, and strong adhesion across the whole coated region. State-of-the-art materials are based on Mn1+xCo2-xO4 group spinel (MCO, x usually 0.5 or 1). However, the utilization of cobalt in SOC technology at an industrial level is hindered by its toxicity, scarcity, and supply uncertainty. Nevertheless, merely applying ceramic coatings to interconnects may not be sufficient, particularly in the context of steel corrosion, so there is a need of additional thermal treatment of the steel substrate depending on the used temperature and atmosphere.
- 1 January 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications)
- p. 137
Investigation of the Co-Free Spinel Used in a Role of Protective Layers in Soc Application
Interconnects have a significant role in the SOC (Solid Oxide Cell) stacks. These elements provide electrical contact by the transfer of electrons between adjacent cells, while simultaneously preventing the mixing of fuel and oxidant streams. Typically, interconnects are composed of ferritic steel with high chromium content that can result in the growth of an oxide layer on the steel surface and the evaporation of harmful volatile chromium compounds directly impacting on the air electrode. This phenomenon leads to a loss of the stack performance. In order to prevent degradation of SOC stacks caused by CrOx volatility, their surface is covered with special ceramic protective layers. Additionally, the coating should have a low area specific resistance (ASR), uniformity, and strong adhesion across the whole coated region. State-of-the-art materials are based on Mn1+xCo2-xO4 group spinel (MCO, x usually 0.5 or 1). However, the utilization of cobalt in SOC technology at an industrial level is hindered by its toxicity, scarcity, and supply uncertainty. Nevertheless, merely applying ceramic coatings to interconnects may not be sufficient, particularly in the context of steel corrosion, so there is a need of additional thermal treatment of the steel substrate depending on the used temperature and atmosphere.