Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gerardo Peláez has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Learning-augmented input shaping for boom cranes under operational constraints: A real-world implementation

    by Gerardo Peláez, Pablo Izquierdo, Gustavo Peláez, Higinio Rubio

    Boom cranes are flexible and underactuated machines in which suspended loads naturally excite lightly damped oscillations, making fast and accurate positioning difficult in industrial cargo-handling operations. Skilled operators often mitigate sway by intuitively shaping their joystick inputs; however, this reliance on individual dexterity is difficult to scale and leads to variability in cycle time and residual oscillations. Input shaping (IS) provides a simple feedforward method to suppress residual sway, yet its industrial adoption remains limited by the perceived maneuver delay associated with the very low sway frequencies typical of long hoisting cables, as well as by the lack of operator-oriented deployment strategies. This paper presents a learning-augmented input shaping framework for boom cranes based on a combined data-driven and physics-consistent multibody modeling approach. Short video recordings of unshaped slewing maneuvers are used to estimate the dominant sway frequency and damping ratio under real operating conditions. These measurements are used to validate a multibody model of the crane implemented in MATLAB/Simscape, which allows systematic exploration of the operational parameter space (hoist length and payload inertia) and provides the frequency envelope that must be attenuated by the shaper. The unshaped maneuver duration T 0 is automatically learned in real time by routing the operator’s joystick command through the cyclic interrupt routine of the PLC, enabling synchronization of the shaped command without external sensing or manual calibration. In practical bulk unloading operations, the learning procedure is typically performed only once for each ship hold compartment and truck hopper configuration, since the corresponding point-to-point payload trajectory remains essentially unchanged during the unloading process. The shaping sequence is generated in the PLC using a time-indexed toggle logic that reproduces the impulse sequence without real-time convolution, reducing computational load. Unlike most studies limited to simulations or laboratory prototypes, the proposed strategy is implemented on an industrial Siemens S7-1511 PLC controlling a Gottwald boom crane operating in the Port of Marín, Spain. Multibody simulations and field observations demonstrate effective reduction of payload oscillations across the operational frequency range while preserving operator workflow and predictable maneuver duration.

  • Open Access

    Multimode Input Shaping for Quay-Side Container Cranes with Multibody-Based Frequency Correction

    by Gerardo Peláez, Pablo Izquierdo, Gustavo Peláez, Higinio Rubio

    This work investigates multimode vibration suppression in quay-side container cranes by combining analytical modeling, nonlinear multibody simulation, robust Input Shaping, and experimental implementation. A linearized double-pendulum model preserving the main geometric and inertial properties of the spreader–ISO-container assembly is first derived to characterize its coupled dynamics, comprising a low-frequency global pendular mode and a higher-frequency relative ringing mode. The errors introduced by linearization are assessed against a higher-fidelity Simscape Multibody model over a wide range of operating configurations. The comparison shows that the analytical formulation provides sufficiently accurate estimates of the modal frequency ranges for robust shaper design. Two Unity Magnitude One-Hump shapers are therefore synthesized for the identified low- and high-frequency bands and subsequently convolved into a multimode bang–off–bang command. Sensitivity analysis confirms simultaneous attenuation of both target frequency ranges. Numerical validation on the nonlinear multibody model shows that the reduction in residual vibration remains above 90% over the investigated variations in hoisting length and ISO-container center-of-mass position. Finally, a PLC-based laboratory implementation demonstrates that Unity Magnitude shaping can be executed through timed command toggles without online convolution, supporting its practical implementation using conventional industrial control hardware.

  • Open Access

    A Multibody-Based Benchmarking Framework for the Control of the Furuta Pendulum

    by Gerardo Peláez, Pablo Izquierdo, Gustavo Peláez, Higinio Rubio

    The Furuta pendulum is a well-known benchmark in the field of underactuated mechanical systems due to its reduced number of control inputs compared to its degrees of freedom, and richly nonlinear behavior. This work addresses the challenge of accurately modeling and controlling such a system without relying on traditional linearization techniques. In contrast to the common approach based on Lagrangian analytical modeling and state–space linearization, we propose a methodology that integrates a high-fidelity multibody model developed in Simscape Multibody (MATLAB), capturing the complete nonlinear dynamics of the system. The multibody model includes all geometric, inertial, and joint parameters of the physical hardware and interfaces directly with Simulink, enabling realistic simulation and control integration. To validate the physical fidelity of the multibody model, we perform a frequency-domain analysis of the pendulum’s natural free response. The dominant vibration frequency extracted from the simulation is compared with the theoretical prediction, demonstrating accurate capture of the system’s inertial and dynamic properties. This validation strategy strengthens the reliability of the model as a digital twin. The classical analytical formulation is provided to validate the simulation model and serve as a comparative framework. This dual modeling strategy allows for benchmarking control strategies against a trustworthy nonlinear digital twin of the Furuta pendulum. Preliminary experimental results using a physical prototype validate the feasibility of the proposed approach and set the foundation for future work in advanced nonlinear control design using the multibody representation as a digital validation tool.


  • Open Access

    A Reasoned Attempt to Mitigate Vibrations in Nonlinear Flexible Systems Influenced by Tractive–Elastic Rolling Contact Friction Through Input Shaping: A Case Study on a Trolley–Pipe Benchmark Transport System

    by Gerardo Peláez, Pablo Izquierdo, Gustavo Peláez, Higinio Rubio

    The well-regarded feedforward control strategy known as Input Shaping is aimed at improving the dynamic response of flexible mechanical systems by reducing overshoot and residual vibration amplitude. Its validity has been confirmed by numerous studies dealing with linear system dynamics. However, its application in nonlinear systems, particularly those influenced by tractive–elastic rolling contact friction, remains a challenging and less explored open research area. This paper investigates whether Input Shaping, without tractive rolling friction compensation, can effectively mitigate vibrations in a trolley–pipe benchmark transport system. In this system, the pipe is modeled as a rolling disc attached to the trolley by a spring at its center of mass, while the trolley itself is connected to a guiding body frame by an additional spring acting as a proportional control. The natural frequencies of the system are analytically estimated and numerically verified from a corresponding well-suited multibody model. Thus, tailored two-mode shapers are designed based on simultaneous constraints and the convolution sum, respectively. Through multibody simulations, this study evaluates the performance of Input Shaping under tractive–elastic rolling contact friction conditions. The findings highlight both the potential and limitations of this control method in addressing nonlinear mechanical systems influenced by tractive–elastic rolling contact friction.

  • Open Access

    A Reasoned Attempt to Mitigate Vibrations in Non-Linear Flexible Systems Influenced by Tractive-Elastic Rolling Contact Friction Through Input Shaping: A Case Study on a Trolley-Pipe Benchmark Transport System

    by Gerardo Pelaez, Pablo Izquierdo, Gustavo Peláez-Lourido, Higinio Rubio

    The well-regarded feedforward control strategy known as Input Shaping is aimed at improving the dynamic response of flexible mechanical systems by reducing overshoot and residual vibration amplitude. Its validity has been confirmed by numerous studies dealing with linear system dynamics. However, its application to nonlinear systems, particularly those influenced by tractive-elastic rolling contact friction, remains a challenging and less explored open research area. This paper investigates whether Input Shaping, without tractive rolling friction compensation, can effectively mitigate vibrations in a trolley-pipe benchmark transport system. In this system, the pipe is modeled as a rolling disk attached to the trolley by a spring at its center of mass, while the trolley itself is connected to a guiding body frame by an additional spring acting as a proportional control. The natural frequencies of the system are analytically estimated and numerically verified from a corresponding well suited multibody model. Thus tailored two-mode shapers are designed based on simultaneous constraints and convolution sum respectively. Through multibody simulations, this study evaluates the performance of Input Shaping under tractive-elastic rolling contact friction conditions. The findings highlight both the potential and limitations of this control method in addressing nonlinear mechanical systems influenced by such tractive-elastic rolling contact friction.

  • Performance analysis of input shaped model reference adaptive control for a single-link flexible manipulator

    by Gerardo Peláez, Cristian Alonso, Higinio Rubio, Juan Carlos García-Prada

    Motion control for flexible link manipulators will have a great influence on their overall performance. Conventional control systems have the problem that they cannot compensate for the presence of uncertainty due to a variety of factors such as a change in the system itself-payload variations, degradation and modelling uncertainty. In addition, the underdamped structure of these systems entails motion-induced transient deflection and residual vibration. On the contrary, adaptive control, in particular Model Reference Adaptive Control (MRAC), has therefore been proposed to handle problems of this type dealing with other systems such as cranes, steering stability control for ground vehicles, airplanes and so on. This study presents a review and discussion on the MRAC and some individual issues of MRAC for these flexible link manipulators are addressed to specify: the state tracking error, the limitation of the adaptation values corresponding to the control gains and the control effort. Dealing with the last one, this work proves that shaping the command input to a Model Reference Adaptive Control (IS-MRAC) reduces the control effort necessary for the plant to follow the reference model and also mitigates the detrimental effects of flexibility. The IS-MRAC is implemented in a Single-Link Flexible Manipulator whose natural frequencies, experimentally and analytically estimated using the Transfer Matrix Method plus symbolic computation, vary significantly depending on payload mass and position. To this structured or parametric uncertainty, the proposed Lyapunov control law using the states associated with the low mode is designed for asymptotic stability and accommodates correctly. The state tracking, vibration suppression and control effort reduction performances of the proposed IS-MRAC combined controller are analysed via numerical simulations and experiments.


  • Dimensional Synthesis Solution of a Compliant Clutch Mechanism for a Formula Student Car (II)

    by Gerardo Peláez, Gustavo Peláez, Higinio Rubio, Alejandro Bustos

  • Dimensional Synthesis Approach of A Compliant Clutch Mechanism for a Formula Student Car (I)

    by Gerardo Peláez, Gustavo Peláez, Higinio Rubio, Alejandro Bustos

  • Open Access

    Dynamics and Embedded Internet of Things Input Shaping Control for Overhead Cranes Transporting Multibody Payloads

    by Gerardo Peláez, Joshua Vaugan, Pablo Izquierdo, Higinio Rubio, Juan Carlos García-Prada

    Input shaping is an Optimal Control feedforward strategy whose ability to define how and when a flexible dynamical system defined by Ordinary Differential Equations (ODEs) and computer controlled would move into its operative space, without command induced unwanted dynamics, has been exhaustively demonstrated. This work examines the issue of Embedded Internet of Things (IoT) Input Shaping with regard to real time control of multibody oscillatory systems whose dynamics are better described by differential algebraic equations (DAEs). An overhead crane hanging a double link multibody payload has been appointed as a benchmark case; it is a multibody, multimode system. This might be worst scenario to implement Input Shaping. The reasons can be found in the wide array of constraints that arise. Firstly, the reliability of the multibody model was tested on a Functional Mock-Up Interface (FMI) with the two link payload suspended from the trolley by comparing the experimental video tapping signals in time domain faced with the signals extracted from the multibody model. The FFTs of the simulated and the experimental signal contain the same frequency harmonics only with somewhat different power due to the real world light damping in the joints. The application of this approach may be extended to other cases i.e., the usefulness of mobile hydraulic cranes is limited because the payload is supported by an overhead cable under tension that allows oscillation to occur during crane motion. If the payload size is not negligible small when compared with the cable length may introduce an additional oscillatory mode that creates a multibody double pendulum. To give the insight into the double pendulum dynamics by Lagrangian methods two slender rods as payloads are analyzed dealing with the overhead crane and a composite revolute-revolute joint is proposed to model the cable of the hydraulic crane, both assumptions facilitates an affordable analysis. This allows developing a general study of this type of multibody payloads dynamics including its normal modes, modes ratios plus ranges of frequencies expected. Input Shapers were calculated for those multimodes of vibration by convolving Specified Insensitivity (SI) shapers for each mode plus a novel Direct SI-SI shaper well suited to reduce the computational requirements, i.e., the number of the shaper taps, to carry out the convolution sum in real time by the IoT device based on a single microcontroller working as the command generator. Several comparisons are presented for the shaped and unshaped responses using both the multibody model, the experimental FMI set-up and finally a real world hydraulic crane under slewing motion commanded by an analog Joystick connected by two RF modules 802.15.4 to the IoT device that carry out the convolution sum in real time. Input Shaping improves the performances for all the cases.