Andrii Potryvai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Andrii Potryvai has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Dmytro Danylchenko
National Technical University “Kharkiv Polytechnic Institute
8 shared publications - Sergii Shevchenko
National Technical University “Kharkiv Polytechnic Institute
4 shared publications - Stanislav Dryvetskyi
National Technical University “Kharkiv Polytechnic Institute
4 shared publications Дмитро Олексійович Данильченко
Національний технічний університет «Харківський політехнічний інститут», Україна
2 shared publicationsСтаніслав Ігорович Дривецький
Національний технічний університет «Харківський політехнічний інститут», Україна
2 shared publications- Kseniia Minakova
Micro- and Nanoelectronics Department, National Technical University “Kharkiv Polytechnic Institute” 5 , Kharkiv 61002
1 shared publication
Latest Publications
- Open Access
- 30 September 2026
- Published by National University "Zaporizhzhia Polytechnic" in Electrical Engineering and Power Engineering
- No. 3,p. 77-83
Application features of flat busbars and tubular conductors in underground utility tunnels
Purpose. To assess the feasibility of using a flat busbar and a hollow cylindrical conductor with an unchanged aluminium cross-sectional area of 240 mm² in a compact high-voltage line in an underground collector. Selecting the phase-conductor shape requires coordination between cooling conditions and electrical parameters. Methodology. A vertical 80×3 mm busbar is compared with tubes having different outer diameters within the range of 30–40 mm. The study uses geometric calculations, a dimensionless-correlation model of natural convection, and an analytical model of a transposed three-phase line with a 300 mm spacing between adjacent phase axes. The air and conductor temperatures are taken as 15 and 70 °C, respectively. For the flat busbar, the electrostatic radius in the thin-strip approximation is distinguished from the geometric mean distance for a uniform current density. Findings. The tube perimeter increases from 94.25 to 125.66 mm but remains below the 166 mm perimeter of the flat busbar. The wall thickness decreases from 2.810 to 2.011 mm. The calculated tube capacitance increases from 17.24 to 18.93 nF/km, while surge impedance loading increases from 61.95 to 68.27 MW. The flat busbar yields 67.80 MW. However, the small difference relative to the 40 mm tube does not allow the alternatives to be ranked confidently without refining the field calculation. Originality. The methodology is developed through a joint comparison of the heat-transfer surface and electrical characteristics of cross-sections containing the same amount of material, with an explicit distinction between the assumptions used. The electrostatic radius and geometric mean distance are treated separately. Practical value. The results are suitable for preliminary selection of conductor geometry. A final permissible-current assessment requires the AC resistance, surface condition, and a thermal model of the collector.
- 30 September 2026
- Published by National University "Zaporizhzhia Polytechnic" in Electrical Engineering and Power Engineering
- No. 3,p. 77-83
Open AccessApplication features of flat busbars and tubular conductors in underground utility tunnels
Purpose. To assess the feasibility of using a flat busbar and a hollow cylindrical conductor with an unchanged aluminium cross-sectional area of 240 mm² in a compact high-voltage line in an underground collector. Selecting the phase-conductor shape requires coordination between cooling conditions and electrical parameters. Methodology. A vertical 80×3 mm busbar is compared with tubes having different outer diameters within the range of 30–40 mm. The study uses geometric calculations, a dimensionless-correlation model of natural convection, and an analytical model of a transposed three-phase line with a 300 mm spacing between adjacent phase axes. The air and conductor temperatures are taken as 15 and 70 °C, respectively. For the flat busbar, the electrostatic radius in the thin-strip approximation is distinguished from the geometric mean distance for a uniform current density. Findings. The tube perimeter increases from 94.25 to 125.66 mm but remains below the 166 mm perimeter of the flat busbar. The wall thickness decreases from 2.810 to 2.011 mm. The calculated tube capacitance increases from 17.24 to 18.93 nF/km, while surge impedance loading increases from 61.95 to 68.27 MW. The flat busbar yields 67.80 MW. However, the small difference relative to the 40 mm tube does not allow the alternatives to be ranked confidently without refining the field calculation. Originality. The methodology is developed through a joint comparison of the heat-transfer surface and electrical characteristics of cross-sections containing the same amount of material, with an explicit distinction between the assumptions used. The electrostatic radius and geometric mean distance are treated separately. Practical value. The results are suitable for preliminary selection of conductor geometry. A final permissible-current assessment requires the AC resistance, surface condition, and a thermal model of the collector.
- Open Access
- 24 April 2024
- Published by National University "Zaporizhzhia Polytechnic" in Electrical Engineering and Power Engineering
- No. 4,p. 32-43
Green energy as a key element of the implementation of the concept of distributed generation
Purpose. The purpose of this article is to study the role of "Green energy" in the concept of generation distribution, to analyze the contribution of renewable sources to the stability of energy. The main tasks include improving models of electric photo panels and wind generators to achieve environmental and economic efficiency. Methodology. Mathematical modeling of photovoltaic panels and wind generators, analysis of the effect of the precision factor and the efficiency factor of the inverter on power generation. A comparative analysis of the obtained results with real data is used to validate the models. The aerodynamic characteristics of the wind generator and the influence on the output power are studied. An optimized model for forecasting the efficiency of hybrid systems using green technologies is being developed. Findings. The obtained research results reveal the key contribution of "Green Energy" to the concept of distributed generation. The methods of mathematical model panels and the use of photovoltaic generators, together with the application of the current coefficient and taking into account the efficiency of the inverter, made it possible to increase the accuracy of forecasting electricity generation. The developed model takes into account the aerodynamic characteristics of the wind generator, emphasizing the realized possibility of exceeding the nominal power in accordance with the real characteristics. The obtained results are compared with real data for validation and confirmation of the effectiveness of the system. Originality. It consists in improving the model of photovoltaic panels, taking into account the influence of the inverter and the aerodynamic features of the wind generator. The work found that the largest generation of wind generators on earth is from October to February, indicating the advantage of combining solar and wind energy. Practical value. It consists in optimizing the forecasting of electricity generation in hybrid systems, which determined the increase in accuracy and adaptability to real conditions. Your study represents the potential for the development of "Green Energy" in communities with a large area and medium capacity.
- 24 April 2024
- Published by National University "Zaporizhzhia Polytechnic" in Electrical Engineering and Power Engineering
- No. 4,p. 32-43
Open AccessGreen energy as a key element of the implementation of the concept of distributed generation
Purpose. The purpose of this article is to study the role of "Green energy" in the concept of generation distribution, to analyze the contribution of renewable sources to the stability of energy. The main tasks include improving models of electric photo panels and wind generators to achieve environmental and economic efficiency. Methodology. Mathematical modeling of photovoltaic panels and wind generators, analysis of the effect of the precision factor and the efficiency factor of the inverter on power generation. A comparative analysis of the obtained results with real data is used to validate the models. The aerodynamic characteristics of the wind generator and the influence on the output power are studied. An optimized model for forecasting the efficiency of hybrid systems using green technologies is being developed. Findings. The obtained research results reveal the key contribution of "Green Energy" to the concept of distributed generation. The methods of mathematical model panels and the use of photovoltaic generators, together with the application of the current coefficient and taking into account the efficiency of the inverter, made it possible to increase the accuracy of forecasting electricity generation. The developed model takes into account the aerodynamic characteristics of the wind generator, emphasizing the realized possibility of exceeding the nominal power in accordance with the real characteristics. The obtained results are compared with real data for validation and confirmation of the effectiveness of the system. Originality. It consists in improving the model of photovoltaic panels, taking into account the influence of the inverter and the aerodynamic features of the wind generator. The work found that the largest generation of wind generators on earth is from October to February, indicating the advantage of combining solar and wind energy. Practical value. It consists in optimizing the forecasting of electricity generation in hybrid systems, which determined the increase in accuracy and adaptability to real conditions. Your study represents the potential for the development of "Green Energy" in communities with a large area and medium capacity.
- Open Access
- 20 December 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency
- No. 2 (7),p. 91-98
Justification of the need to build underground substations and power lines
This work is aimed at finding the world experience in the creation of underground high-voltage substations, identifying their organisational features and solutions to ensure the most efficient operation modes. The positive and negative aspects of this approach are considered. The article identifies operational characteristics that can have a significant impact on substation operations, complicate the design process, and change the rules for selecting equipment for facilities. The experience of Western and Eastern colleagues in this area is analysed. Much attention is paid to the Xudong underground substation with a rated voltage of 220 kV in the Hubei power system, which is the first underground substation in central China. The same example reveals the peculiarities of organising an underground substation in urban areas. The article considers the peculiarities of organising underground substations near rivers, where groundwater complicates the design. Based on the examples considered, possible measures and changes in the design of typical substations to create new underground configurations are analysed. A comparison of the efficiency of phase convergence is made and the dependencies and conditions under which a significant change in the efficiency of electricity transmission on the territory of substations are established. The effect of using phase convergence on the bandwidth and wave impedance of conductors is determined. The positive impact of underground operating conditions on most elements of the system is established. The analysis of operating conditions and the use of efficient configurations allowed us to find potentially the most promising ways to implement underground substations. A reasonable range of measures to influence individual elements of the underground substation, based on the operating conditions, to ensure the most efficient configuration in terms of capacity and thermal conditions of the equipment is proposed. Дана робота націлена на пошук світового досвіду у створенні підземних високовольтних підстанцій, виявлення їх особливостей організації та рішень для забезпечення максимально ефективних режимів роботи. Розглянуто позитивні та негативні сторони даного підходу. Визначено експлуатаційні характеристики, які здатні створити значний вплив на режими роботи підстанцій, ускладнити процес проектування та змінити правила вибору обладнання для об’єктів. Проаналізовано досвід західних та східних колег в даному питанні. Велику увагу приділенню підземній підстанції Сюдун з номінальною напругою 220 кВ в енергосистемі Хубей, що є першою підземною підстанцією в центральній частині Китаю. На цьому ж прикладі виявлено особливості організації підземної підстанціях в міських умовах. Розглянуто особливості організації підземних підстанцій поблизу річок де наявність підземних вод ускладнює проектування. На базі розглянутих прикладів проаналізовано можливі заходи та зміни в конструкціях типових підстанцій для створення нових підземних конфігурацій. Виконано порівняння ефективності при зближенні фаз та встановлено залежності та умови, за яких відбувається значна зміна в ефективності передавання електричної енергії на території підстанцій. Визначено ефект використання зближення фаз на пропускну здатність та хвильовий опір провідників. Встановлено позитивний вплив підземних умов експлуатації на більшість елементів системи. Аналіз експлуатаційних умов та використання ефективних конфігурацій дозволили знайти потенційно найбільш перспективні способи реалізації підземних підстанцій. Запропоновано обґрунтований ряд заходів по впливу на окремі елементи підземної підстанції, виходячи з експлуатаційних умов, по забезпеченню найбільш ефективної конфігурації з точки зору пропускної здатності та теплового режиму обладнання.
- 20 December 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency
- No. 2 (7),p. 91-98
Open AccessJustification of the need to build underground substations and power lines
This work is aimed at finding the world experience in the creation of underground high-voltage substations, identifying their organisational features and solutions to ensure the most efficient operation modes. The positive and negative aspects of this approach are considered. The article identifies operational characteristics that can have a significant impact on substation operations, complicate the design process, and change the rules for selecting equipment for facilities. The experience of Western and Eastern colleagues in this area is analysed. Much attention is paid to the Xudong underground substation with a rated voltage of 220 kV in the Hubei power system, which is the first underground substation in central China. The same example reveals the peculiarities of organising an underground substation in urban areas. The article considers the peculiarities of organising underground substations near rivers, where groundwater complicates the design. Based on the examples considered, possible measures and changes in the design of typical substations to create new underground configurations are analysed. A comparison of the efficiency of phase convergence is made and the dependencies and conditions under which a significant change in the efficiency of electricity transmission on the territory of substations are established. The effect of using phase convergence on the bandwidth and wave impedance of conductors is determined. The positive impact of underground operating conditions on most elements of the system is established. The analysis of operating conditions and the use of efficient configurations allowed us to find potentially the most promising ways to implement underground substations. A reasonable range of measures to influence individual elements of the underground substation, based on the operating conditions, to ensure the most efficient configuration in terms of capacity and thermal conditions of the equipment is proposed. Дана робота націлена на пошук світового досвіду у створенні підземних високовольтних підстанцій, виявлення їх особливостей організації та рішень для забезпечення максимально ефективних режимів роботи. Розглянуто позитивні та негативні сторони даного підходу. Визначено експлуатаційні характеристики, які здатні створити значний вплив на режими роботи підстанцій, ускладнити процес проектування та змінити правила вибору обладнання для об’єктів. Проаналізовано досвід західних та східних колег в даному питанні. Велику увагу приділенню підземній підстанції Сюдун з номінальною напругою 220 кВ в енергосистемі Хубей, що є першою підземною підстанцією в центральній частині Китаю. На цьому ж прикладі виявлено особливості організації підземної підстанціях в міських умовах. Розглянуто особливості організації підземних підстанцій поблизу річок де наявність підземних вод ускладнює проектування. На базі розглянутих прикладів проаналізовано можливі заходи та зміни в конструкціях типових підстанцій для створення нових підземних конфігурацій. Виконано порівняння ефективності при зближенні фаз та встановлено залежності та умови, за яких відбувається значна зміна в ефективності передавання електричної енергії на території підстанцій. Визначено ефект використання зближення фаз на пропускну здатність та хвильовий опір провідників. Встановлено позитивний вплив підземних умов експлуатації на більшість елементів системи. Аналіз експлуатаційних умов та використання ефективних конфігурацій дозволили знайти потенційно найбільш перспективні способи реалізації підземних підстанцій. Запропоновано обґрунтований ряд заходів по впливу на окремі елементи підземної підстанції, виходячи з експлуатаційних умов, по забезпеченню найбільш ефективної конфігурації з точки зору пропускної здатності та теплового режиму обладнання.
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Implementation of Digital Remote Line Protection in Java Language
This paper introduces an algorithm for implementing distance protection of lines with polygonal and circular characteristics using the Java programming language. The analysis assesses the algorithm's performance for various types of relay characteristics during different short circuit scenarios. To conduct the analysis, a model of the protected line was developed in PSCAD/EMTD, which provided instantaneous values of currents and voltages during short circuits. An emergency COMTRADE file was generated to capture the process.For a visual representation of the distance protection operation, graphs are constructed, illustrating the relay's response under different conditions. These graphs also demonstrate how the relay characteristics impact the operation of the resistance relay, allowing a better understanding of the system's behavior.
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Implementation of Digital Remote Line Protection in Java Language
This paper introduces an algorithm for implementing distance protection of lines with polygonal and circular characteristics using the Java programming language. The analysis assesses the algorithm's performance for various types of relay characteristics during different short circuit scenarios. To conduct the analysis, a model of the protected line was developed in PSCAD/EMTD, which provided instantaneous values of currents and voltages during short circuits. An emergency COMTRADE file was generated to capture the process.For a visual representation of the distance protection operation, graphs are constructed, illustrating the relay's response under different conditions. These graphs also demonstrate how the relay characteristics impact the operation of the resistance relay, allowing a better understanding of the system's behavior.
- Open Access
- 9 July 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency
- No. 1 (6),p. 16-21
System for dynamic prediction of the technical condition of the equipment of a combined electric power system
This paper analyses the neuro-fuzzy modelling method for predicting the technical state of a system. The model of the system for dynamic forecasting of the technical condition of the equipment of an integrated power system consists of: a simulation model of a solar power plant, a simulation model of a wind turbine, and a simulation model of a synchronous generator acting as a thermal power plant. To perform the modelling, a special system of tools Fuzzy extension logic toolbox was used to assess the quality of the synchronous generator. The obtained estimates of the technical condition of the equipment are processed using an adaptive neuro-fuzzy inference system (ANFIS), which results in a forecast of the technical condition of the equipment at a given time interval. It has been established that fuzzy models have found wide practical application in the construction of fuzzy controllers, data recognition and processing systems, etc. Modelling of real systems with fuzzy models is based on the fact that fuzzy models of the Sugeno and Mamdani types are universal function approximators. The constructed model of the system for dynamic forecasting of the technical condition of equipment can be used in the design of renewable energy facilities, as well as in the development and testing of algorithms for control and monitoring systems. The system for assessing and predicting the state of equipment using fuzzy logic can be used to support decision-making by the power plant operator when determining the need for repair and relocation of equipment. The key advantage of the presented system is its ability to take into account dynamic changes in the state of a solar power plant depending on the transmitted operating conditions, which makes it possible to bring the obtained data even closer to the real ones. Also, a feature of the system for dynamic forecasting of the technical condition of equipment is the use of a simulation model of a solar power plant, which has a model to bring the simulation closer to real operating conditions, taking into account dust, surface heating etc.
- 9 July 2023
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency
- No. 1 (6),p. 16-21
Open AccessSystem for dynamic prediction of the technical condition of the equipment of a combined electric power system
This paper analyses the neuro-fuzzy modelling method for predicting the technical state of a system. The model of the system for dynamic forecasting of the technical condition of the equipment of an integrated power system consists of: a simulation model of a solar power plant, a simulation model of a wind turbine, and a simulation model of a synchronous generator acting as a thermal power plant. To perform the modelling, a special system of tools Fuzzy extension logic toolbox was used to assess the quality of the synchronous generator. The obtained estimates of the technical condition of the equipment are processed using an adaptive neuro-fuzzy inference system (ANFIS), which results in a forecast of the technical condition of the equipment at a given time interval. It has been established that fuzzy models have found wide practical application in the construction of fuzzy controllers, data recognition and processing systems, etc. Modelling of real systems with fuzzy models is based on the fact that fuzzy models of the Sugeno and Mamdani types are universal function approximators. The constructed model of the system for dynamic forecasting of the technical condition of equipment can be used in the design of renewable energy facilities, as well as in the development and testing of algorithms for control and monitoring systems. The system for assessing and predicting the state of equipment using fuzzy logic can be used to support decision-making by the power plant operator when determining the need for repair and relocation of equipment. The key advantage of the presented system is its ability to take into account dynamic changes in the state of a solar power plant depending on the transmitted operating conditions, which makes it possible to bring the obtained data even closer to the real ones. Also, a feature of the system for dynamic forecasting of the technical condition of equipment is the use of a simulation model of a solar power plant, which has a model to bring the simulation closer to real operating conditions, taking into account dust, surface heating etc.
- Open Access
- 2 July 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency
- No. 1 (4),p. 79-85
Simulation of the electric field of a polymer bushing in the Ansys Maxwell software environment
The article analyses the software tools for modelling the maps of the electric field strength of insulators. The need to address this issue is dictated by the fact that the uneven electric field on the insulators increases the probability of partial discharges that destroy the insulating layer, so it is very important to optimize the electric field strength on the insulator. The design features of bushings and features of partial discharges in them are considered. The distribution of electric field strength in a polymer pass-through operating in an AC network without contaminants is considered. The results of modelling the electric field of insulators in the software environment Ansys Maxwell, which is based on the simulation of the finite element method, are presented. Points in the construction of a 35 kV bushing polymer insulator have been identified, where the highest level of electric field strength is concentrated. A method of influencing the area under study in the area of the flange connection to the ground plate is proposed. This defines the use of a conductive cover placed between the flange and the place of connection to the polymeric insulating layer, which significantly improves the overall electric field strength distribution on the surface of the bushing polymer insulator and makes it competitive compared to the most commonly used porcelain bushings, by increasing the electrical strength of the structure. According to the results of research, a means of optimizing the electric field of the pass-through polymer insulator is proposed, which allows to increase its electric resistance and reduce the electric field strength in the area of flange contact with the mounting surface, which in turn prevents premature partial discharges in the insulating bodies.
- 2 July 2022
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency
- No. 1 (4),p. 79-85
Open AccessSimulation of the electric field of a polymer bushing in the Ansys Maxwell software environment
The article analyses the software tools for modelling the maps of the electric field strength of insulators. The need to address this issue is dictated by the fact that the uneven electric field on the insulators increases the probability of partial discharges that destroy the insulating layer, so it is very important to optimize the electric field strength on the insulator. The design features of bushings and features of partial discharges in them are considered. The distribution of electric field strength in a polymer pass-through operating in an AC network without contaminants is considered. The results of modelling the electric field of insulators in the software environment Ansys Maxwell, which is based on the simulation of the finite element method, are presented. Points in the construction of a 35 kV bushing polymer insulator have been identified, where the highest level of electric field strength is concentrated. A method of influencing the area under study in the area of the flange connection to the ground plate is proposed. This defines the use of a conductive cover placed between the flange and the place of connection to the polymeric insulating layer, which significantly improves the overall electric field strength distribution on the surface of the bushing polymer insulator and makes it competitive compared to the most commonly used porcelain bushings, by increasing the electrical strength of the structure. According to the results of research, a means of optimizing the electric field of the pass-through polymer insulator is proposed, which allows to increase its electric resistance and reduce the electric field strength in the area of flange contact with the mounting surface, which in turn prevents premature partial discharges in the insulating bodies.
- Open Access
- 30 December 2021
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency
- No. 2 (3),p. 137-143
Search for the optimal means for modelling the electric field of insulators
The article analyses software tools for simulation of electric field of insulators. The necessity of solving this problem is dictated by the fact that inaccuracy of simulation software allows stating that the simulation model cannot be improved correctly due to calculation errors in the program itself. Design features of different types of insulators, first of all, the most widespread and used - porcelain and glass insulators, are considered. The change of electric field in a glass and porcelain insulator operating in an AC network without contamination is described. Numerous calculation methods such as boundary element method, finite element method, integral equation method and others have been analysed. It is revealed, that from the point of view of functionality and expediency of application for solution of field problems relevant to electric power industry the finite difference method and finite element method are the most universal ones. The results of insulator electric field modelling using Ansoft Maxwell, CST EM Studio and Elcut software are given. Among Ansys, FEMLAB, Ansoft Maxwell, CST EM Studio, IES Coulomb and Elcut that were analyzed, the software Ansoft Maxwell and CST EM, where the finite element method is implemented, were chosen to solve the given problem. It was found out, which one of the software complies better with the given requirements as to accuracy (by calculation of error of deviation of mathematical modelling and experimental data) and in terms of the method incorporated in the algorithms of the software. Experimental data are compared with simulation results. The possibility of diagnosing insulators by electric field tension parameters has been revealed.
- 30 December 2021
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Energy: Reliability and Energy Efficiency
- No. 2 (3),p. 137-143
Open AccessSearch for the optimal means for modelling the electric field of insulators
The article analyses software tools for simulation of electric field of insulators. The necessity of solving this problem is dictated by the fact that inaccuracy of simulation software allows stating that the simulation model cannot be improved correctly due to calculation errors in the program itself. Design features of different types of insulators, first of all, the most widespread and used - porcelain and glass insulators, are considered. The change of electric field in a glass and porcelain insulator operating in an AC network without contamination is described. Numerous calculation methods such as boundary element method, finite element method, integral equation method and others have been analysed. It is revealed, that from the point of view of functionality and expediency of application for solution of field problems relevant to electric power industry the finite difference method and finite element method are the most universal ones. The results of insulator electric field modelling using Ansoft Maxwell, CST EM Studio and Elcut software are given. Among Ansys, FEMLAB, Ansoft Maxwell, CST EM Studio, IES Coulomb and Elcut that were analyzed, the software Ansoft Maxwell and CST EM, where the finite element method is implemented, were chosen to solve the given problem. It was found out, which one of the software complies better with the given requirements as to accuracy (by calculation of error of deviation of mathematical modelling and experimental data) and in terms of the method incorporated in the algorithms of the software. Experimental data are compared with simulation results. The possibility of diagnosing insulators by electric field tension parameters has been revealed.
- 13 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 42, 670-675
Modernization of a Simulation Model of a Photovoltaic Module, by Accounting for the Effect of Snowing of Photovoltaic Panels on System Performance with Correction for Panel Cleaning for Matlab Simulink
The paper proposes two block models that allow to bring the simulation model of a solar power plant closer to the prediction of generation under operating conditions, by taking into account the effect of snowing of the PV module surface on the generation of the solar power plant and the effect of artificial cleaning.
- 13 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 42, 670-675
Modernization of a Simulation Model of a Photovoltaic Module, by Accounting for the Effect of Snowing of Photovoltaic Panels on System Performance with Correction for Panel Cleaning for Matlab Simulink
The paper proposes two block models that allow to bring the simulation model of a solar power plant closer to the prediction of generation under operating conditions, by taking into account the effect of snowing of the PV module surface on the generation of the solar power plant and the effect of artificial cleaning.