Firaol S. Midekssa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Firaol S. Midekssa has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Brendon M. Baker
University of Michigan
5 shared publications - Andrew J. Putnam
Department of Biomedical Engineering, University of Michigan, Ann Arbor, USA
2 shared publications - Atticus J. McCoy
Department of Biomedical Engineering, University of Michigan, Ann Arbor, USA
2 shared publications - Irene W. Zhang
Department of Biomedical Engineering, University of Michigan, Ann Arbor, MI, United States
2 shared publications - Jan P. Stegemann
Department of Biomedical Engineering University of Michigan Ann Arbor Michigan USA
2 shared publications - Michael M. Hu
Department of Biomedical Engineering, University of Michigan, Ann Arbor, MI 48109
2 shared publications
Latest Publications
- Open Access
Filling the Void: Rapid Revascularization via Vasculogenic Assembly in Semi-synthetic Granular Hydrogel Grafts
Rapid revascularization is critical to tissue graft survival, as delayed reperfusion drives tissue ischemia and compromises cell viability and graft function. Although bulk hydrogels have been explored for promoting vessel formation, vascularization remains too slow to prevent ischemic injury to grafted tissues, highlighting the need for biomaterial platforms that accelerate graft revascularization and reperfusion. In this study, we present granular hydrogel composites (GHCs), where interstitial space is filled with fibrin and collagen to provide a vasculogenic matrix environment. GHCs supported the assembly of embedded endothelial cells into interconnected, lumenized networks in vitro which anastomosed with host vasculature and were systemically perfused 7 days after implantation. Careful optimization studies revealed that GHCs formed from covalently interlinked, RGD-functionalized microgels of 115 µm diameter best supported vascular network formation in vitro and intravascular blood perfusion in vivo . To test the utility of GHCs for the vascular integration of a demanding and therapeutically relevant parenchymal tissue, GHC-based ovarian tissue grafts were implanted in a murine xenograft model and successfully connected to host vasculature, restoring blood flow to embedded human ovarian tissues within 10 days post-implantation. Notably, endothelial cells seeded within GHCs formed viable vasculature without pre-culture. This work establishes GHCs as a biomaterial platform to rapidly connect parenchymal tissues to host vasculature, with broad translational potential across engineered tissue grafting applications.
Open AccessFilling the Void: Rapid Revascularization via Vasculogenic Assembly in Semi-synthetic Granular Hydrogel Grafts
Rapid revascularization is critical to tissue graft survival, as delayed reperfusion drives tissue ischemia and compromises cell viability and graft function. Although bulk hydrogels have been explored for promoting vessel formation, vascularization remains too slow to prevent ischemic injury to grafted tissues, highlighting the need for biomaterial platforms that accelerate graft revascularization and reperfusion. In this study, we present granular hydrogel composites (GHCs), where interstitial space is filled with fibrin and collagen to provide a vasculogenic matrix environment. GHCs supported the assembly of embedded endothelial cells into interconnected, lumenized networks in vitro which anastomosed with host vasculature and were systemically perfused 7 days after implantation. Careful optimization studies revealed that GHCs formed from covalently interlinked, RGD-functionalized microgels of 115 µm diameter best supported vascular network formation in vitro and intravascular blood perfusion in vivo . To test the utility of GHCs for the vascular integration of a demanding and therapeutically relevant parenchymal tissue, GHC-based ovarian tissue grafts were implanted in a murine xenograft model and successfully connected to host vasculature, restoring blood flow to embedded human ovarian tissues within 10 days post-implantation. Notably, endothelial cells seeded within GHCs formed viable vasculature without pre-culture. This work establishes GHCs as a biomaterial platform to rapidly connect parenchymal tissues to host vasculature, with broad translational potential across engineered tissue grafting applications.
- 5 September 2025
- Published by Springer Nature in Nature Materials
- Vol. 24 (11) , 1812-1825
Local photocrosslinking of native tissue matrix regulates lung epithelial cell mechanosensing and function
Within most tissues, the extracellular microenvironment provides mechanical cues that guide cell fate and function. Changes in the extracellular matrix such as aberrant deposition, densification and increased crosslinking are hallmarks of late-stage fibrotic diseases that often lead to organ dysfunction. Biomaterials have been widely used to mimic the mechanical properties of the fibrotic matrix and study pathophysiologic cell function. However, the initiation of fibrosis has largely been overlooked, due to challenges in recapitulating early stages of disease progression within the native extracellular microenvironment. Here, using visible-light-mediated photochemistry, we induced local crosslinking and stiffening of extracellular matrix proteins within ex vivo mouse and human lung tissue. In ex vivo lung tissue of epithelial cell lineage-traced mice, local matrix crosslinking mimicked early fibrotic lesions that increased alveolar epithelial cell mechanosensing, differentiation, and nascent protein deposition and remodelling. However, the inhibition of cytoskeletal tension, mechanosensitive signalling pathways or integrin engagement reduced epithelial cell spreading and differentiation. Our findings emphasize the role of local extracellular matrix crosslinking and nascent protein deposition in early stage tissue fibrosis and have implications for ex vivo disease modelling and applications to other tissues.
- 5 September 2025
- Published by Springer Nature in Nature Materials
- Vol. 24 (11) , 1812-1825
Local photocrosslinking of native tissue matrix regulates lung epithelial cell mechanosensing and function
Within most tissues, the extracellular microenvironment provides mechanical cues that guide cell fate and function. Changes in the extracellular matrix such as aberrant deposition, densification and increased crosslinking are hallmarks of late-stage fibrotic diseases that often lead to organ dysfunction. Biomaterials have been widely used to mimic the mechanical properties of the fibrotic matrix and study pathophysiologic cell function. However, the initiation of fibrosis has largely been overlooked, due to challenges in recapitulating early stages of disease progression within the native extracellular microenvironment. Here, using visible-light-mediated photochemistry, we induced local crosslinking and stiffening of extracellular matrix proteins within ex vivo mouse and human lung tissue. In ex vivo lung tissue of epithelial cell lineage-traced mice, local matrix crosslinking mimicked early fibrotic lesions that increased alveolar epithelial cell mechanosensing, differentiation, and nascent protein deposition and remodelling. However, the inhibition of cytoskeletal tension, mechanosensitive signalling pathways or integrin engagement reduced epithelial cell spreading and differentiation. Our findings emphasize the role of local extracellular matrix crosslinking and nascent protein deposition in early stage tissue fibrosis and have implications for ex vivo disease modelling and applications to other tissues.
- 12 June 2025
- Published by Elsevier in Acta Biomaterialia
- Vol. 201, 283-296
Clickable PEG-norbornene microgels support suspension bioprinting and microvascular assembly
- 12 June 2025
- Published by Elsevier in Acta Biomaterialia
- Vol. 201, 283-296
Clickable PEG-norbornene microgels support suspension bioprinting and microvascular assembly
- Open Access
- 1 January 2025
- Published by KEAI Publishing in Bioactive Materials
- Vol. 43, 82-97
Ultrasound-generated bubbles enhance osteogenic differentiation of mesenchymal stromal cells in composite collagen hydrogels
Hydrogels can improve the delivery of mesenchymal stromal cells (MSCs) by providing crucial biophysical cues that mimic the extracellular matrix. The differentiation of MSCs is dependent on biophysical cues like stiffness and viscoelasticity, yet conventional hydrogels cannot be dynamically altered after fabrication and implantation to actively direct differentiation. We developed a composite hydrogel, consisting of type I collagen and phase-shift emulsion, where osteogenic differentiation of MSCs can be non-invasively modulated using ultrasound. When exposed to ultrasound, the emulsion within the hydrogel was non-thermally vaporized into bubbles, which locally compacted and stiffened the collagen matrix surrounding each bubble. Bubble growth and matrix compaction were correlated, with collagen regions proximal (i.e., ≤ ∼60 μm) to the bubble displaying a 2.5-fold increase in Young's modulus compared to distal regions (i.e., > ∼60 μm). The viability and proliferation of MSCs, which were encapsulated within the composite hydrogel, were not impacted by bubble formation. In vitro and in vivo studies revealed encapsulated MSCs exhibited significantly elevated levels of RUNX2 and osteocalcin, markers of osteogenic differentiation, in collagen regions proximal to the bubble compared to distal regions. Additionally, alkaline phosphatase activity and calcium deposition were enhanced adjacent to the bubble. An opposite trend was observed for CD90, a marker of MSC stemness. Following subcutaneous implantation, bubbles persisted in the hydrogels for two weeks, which led to localized collagen alignment and increases in nuclear asymmetry. These results are a significant step toward controlling the 3D differentiation of MSCs in a non-invasive and on-demand manner.
- 1 January 2025
- Published by KEAI Publishing in Bioactive Materials
- Vol. 43, 82-97
Open AccessUltrasound-generated bubbles enhance osteogenic differentiation of mesenchymal stromal cells in composite collagen hydrogels
Hydrogels can improve the delivery of mesenchymal stromal cells (MSCs) by providing crucial biophysical cues that mimic the extracellular matrix. The differentiation of MSCs is dependent on biophysical cues like stiffness and viscoelasticity, yet conventional hydrogels cannot be dynamically altered after fabrication and implantation to actively direct differentiation. We developed a composite hydrogel, consisting of type I collagen and phase-shift emulsion, where osteogenic differentiation of MSCs can be non-invasively modulated using ultrasound. When exposed to ultrasound, the emulsion within the hydrogel was non-thermally vaporized into bubbles, which locally compacted and stiffened the collagen matrix surrounding each bubble. Bubble growth and matrix compaction were correlated, with collagen regions proximal (i.e., ≤ ∼60 μm) to the bubble displaying a 2.5-fold increase in Young's modulus compared to distal regions (i.e., > ∼60 μm). The viability and proliferation of MSCs, which were encapsulated within the composite hydrogel, were not impacted by bubble formation. In vitro and in vivo studies revealed encapsulated MSCs exhibited significantly elevated levels of RUNX2 and osteocalcin, markers of osteogenic differentiation, in collagen regions proximal to the bubble compared to distal regions. Additionally, alkaline phosphatase activity and calcium deposition were enhanced adjacent to the bubble. An opposite trend was observed for CD90, a marker of MSC stemness. Following subcutaneous implantation, bubbles persisted in the hydrogels for two weeks, which led to localized collagen alignment and increases in nuclear asymmetry. These results are a significant step toward controlling the 3D differentiation of MSCs in a non-invasive and on-demand manner.
- Open Access
Clickable PEG-norbornene microgels support suspension bioprinting and microvascular assembly
The development of perfusable and multiscale vascular networks remains one of the largest challenges in tissue engineering. As such, there is a need for the creation of customizable and facile methods to produce robustly vascularized constructs. In this study, secondarily crosslinkable (clickable) poly(ethylene glycol)-norbornene (PEGNB) microbeads were produced and evaluated for their ability to sequentially support suspension bioprinting and microvascular self-assembly towards the aim of engineering hierarchical vasculature. The clickable PEGNB microbead slurry exhibited mechanical behavior suitable for suspension bioprinting of sacrificial bioinks, could be UV crosslinked into a granular construct post-print, and withstood evacuation of the bioink and subsequent perfusion of the patterned void space. Endothelial and stromal cells co-embedded within jammed RGD-modified PEGNB microbead slurries assembled into capillary-scale vasculature after secondary crosslinking of the beads into granular constructs, with endothelial tubules forming within the interstitial space between microbeads and supported by the perivascular association of the stromal cells. Microvascular self-assembly was not impacted by printing sacrificial bioinks into the cell-laden microbead support bath before UV crosslinking. Collectively, these results demonstrate that clickable PEGNB microbeads are a versatile substrate for both suspension printing and microvascular culture and may be the foundation for a promising methodology to engineer hierarchical vasculature.
Open AccessClickable PEG-norbornene microgels support suspension bioprinting and microvascular assembly
The development of perfusable and multiscale vascular networks remains one of the largest challenges in tissue engineering. As such, there is a need for the creation of customizable and facile methods to produce robustly vascularized constructs. In this study, secondarily crosslinkable (clickable) poly(ethylene glycol)-norbornene (PEGNB) microbeads were produced and evaluated for their ability to sequentially support suspension bioprinting and microvascular self-assembly towards the aim of engineering hierarchical vasculature. The clickable PEGNB microbead slurry exhibited mechanical behavior suitable for suspension bioprinting of sacrificial bioinks, could be UV crosslinked into a granular construct post-print, and withstood evacuation of the bioink and subsequent perfusion of the patterned void space. Endothelial and stromal cells co-embedded within jammed RGD-modified PEGNB microbead slurries assembled into capillary-scale vasculature after secondary crosslinking of the beads into granular constructs, with endothelial tubules forming within the interstitial space between microbeads and supported by the perivascular association of the stromal cells. Microvascular self-assembly was not impacted by printing sacrificial bioinks into the cell-laden microbead support bath before UV crosslinking. Collectively, these results demonstrate that clickable PEGNB microbeads are a versatile substrate for both suspension printing and microvascular culture and may be the foundation for a promising methodology to engineer hierarchical vasculature.
- Open Access
- 23 November 2023
- Published by Wiley in Advanced Science
- Vol. 11 (3) , e2306210
Mechanical Intercellular Communication via Matrix‐Borne Cell Force Transmission During Vascular Network Formation
Intercellular communication is critical to the formation and homeostatic function of all tissues. Previous work has shown that cells can communicate mechanically via the transmission of cell‐generated forces through their surrounding extracellular matrix, but this process is not well understood. Here, mechanically defined, synthetic electrospun fibrous matrices are utilized in conjunction with a microfabrication‐based cell patterning approach to examine mechanical intercellular communication (MIC) between endothelial cells (ECs) during their assembly into interconnected multicellular networks. It is found that cell force‐mediated matrix displacements in deformable fibrous matrices underly directional extension and migration of neighboring ECs toward each other prior to the formation of stable cell‐cell connections enriched with vascular endothelial cadherin (VE‐cadherin). A critical role is also identified for calcium signaling mediated by focal adhesion kinase and mechanosensitive ion channels in MIC that extends to multicellular assembly of 3D vessel‐like networks when ECs are embedded within fibrin hydrogels. These results illustrate a role for cell‐generated forces and ECM mechanical properties in multicellular assembly of capillary‐like EC networks and motivates the design of biomaterials that promote MIC for vascular tissue engineering.
- 23 November 2023
- Published by Wiley in Advanced Science
- Vol. 11 (3) , e2306210
Open AccessMechanical Intercellular Communication via Matrix‐Borne Cell Force Transmission During Vascular Network Formation
Intercellular communication is critical to the formation and homeostatic function of all tissues. Previous work has shown that cells can communicate mechanically via the transmission of cell‐generated forces through their surrounding extracellular matrix, but this process is not well understood. Here, mechanically defined, synthetic electrospun fibrous matrices are utilized in conjunction with a microfabrication‐based cell patterning approach to examine mechanical intercellular communication (MIC) between endothelial cells (ECs) during their assembly into interconnected multicellular networks. It is found that cell force‐mediated matrix displacements in deformable fibrous matrices underly directional extension and migration of neighboring ECs toward each other prior to the formation of stable cell‐cell connections enriched with vascular endothelial cadherin (VE‐cadherin). A critical role is also identified for calcium signaling mediated by focal adhesion kinase and mechanosensitive ion channels in MIC that extends to multicellular assembly of 3D vessel‐like networks when ECs are embedded within fibrin hydrogels. These results illustrate a role for cell‐generated forces and ECM mechanical properties in multicellular assembly of capillary‐like EC networks and motivates the design of biomaterials that promote MIC for vascular tissue engineering.