Quanchao Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Quanchao Wang has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Wen-Hua Sun
Key Laboratory of Engineering Plastics and Beijing National Laboratory for Molecular Sciences, Institute of Chemistry Chinese Academy of Sciences Beijing China
7 shared publications - Yanping Ma
Key Laboratory of Engineering Plastics and Beijing National Laboratory for Molecular Sciences, Institute of Chemistry Chinese Academy of Sciences Beijing China
7 shared publications - Tongling Liang
Key Laboratory of Engineering Plastics and Beijing National Laboratory for Molecular Sciences, Institute of Chemistry Chinese Academy of Sciences Beijing China
6 shared publications - Qiuyue Zhang
Key Laboratory of Engineering Plastics and Beijing National Laboratory for Molecular Sciences, Institute of Chemistry Chinese Academy of Sciences Beijing China
4 shared publications Yizhou Wang
Key Laboratory of Engineering Plastics and Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China
4 shared publications- Yizhou Wang
Key Laboratory of Engineering Plastics and Beijing National Laboratory for Molecular Sciences, Institute of Chemistry Chinese Academy of Sciences, Beijing 100190, China
3 shared publications
Latest Publications
- 16 September 2026
- Published by Elsevier in Journal of Catalysis
- Vol. 463
Phenylmethaniminophenanthroline iron catalysts: steering ethylene oligomerization to higher α–olefins
- 16 September 2026
- Published by Elsevier in Journal of Catalysis
- Vol. 463
Phenylmethaniminophenanthroline iron catalysts: steering ethylene oligomerization to higher α–olefins
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
Nickel complexes with multi-site remote steric hindrance to enhance ethylene polymerization and thermal stability
Bis(arylimino)acenaphthene–nickel bromides with multi-site remote hindrance (Ni1–Ni7), reducing the buried volume around nickel, achieve higher activities and better thermal stability toward ethylene polymerization for polyethylene elastomers.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
Nickel complexes with multi-site remote steric hindrance to enhance ethylene polymerization and thermal stability
Bis(arylimino)acenaphthene–nickel bromides with multi-site remote hindrance (Ni1–Ni7), reducing the buried volume around nickel, achieve higher activities and better thermal stability toward ethylene polymerization for polyethylene elastomers.
- 10 September 2025
- Published by Elsevier in Molecular Catalysis
- Vol. 587
Remote naphthyl enhancing bis(imino)acenaphthene-Nickel precatalysts in ethylene polymerization
- 10 September 2025
- Published by Elsevier in Molecular Catalysis
- Vol. 587
Remote naphthyl enhancing bis(imino)acenaphthene-Nickel precatalysts in ethylene polymerization
- Open Access
- 22 July 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54 (33) , 12590-12600
Fluoro- & trifluoromethoxy-modified bis(imino)pyridyliron chloride enhancing the activity and stability of vinyl polyethylenes
High-performance multi-fluorine-substituted bis(imino)pyridyl Fe catalysts for ethylene polymerization achieve peak activity of 17.28 × 10 6 g (PE) mol −1 (Fe) h −1 at 70 °C showing excellent thermal stability and producing tailored-MW linear PEs.
- 22 July 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54 (33) , 12590-12600
Open AccessFluoro- & trifluoromethoxy-modified bis(imino)pyridyliron chloride enhancing the activity and stability of vinyl polyethylenes
High-performance multi-fluorine-substituted bis(imino)pyridyl Fe catalysts for ethylene polymerization achieve peak activity of 17.28 × 10 6 g (PE) mol −1 (Fe) h −1 at 70 °C showing excellent thermal stability and producing tailored-MW linear PEs.
- 13 May 2025
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (23) , 2718-2731
Ultra-low-molecular-weight PE wax using a cyclohexyl-fused bis(imino)pyridine-cobalt catalyst functionalized with a remote para-phenyl group
With the goal to produce high quality polyethylene wax, five distinct bis(cyclohexyl)-fused bis(imino)pyridine-cobalt complexes, Co1–Co5, bearing a remote para-phenyl group have been synthesized and employed as precatalysts in ethylene polymerization. All complexes, under activation with methylaluminoxane (MAO) or modified MAO (MMAO), exhibited extremely high catalytic activity reaching up to 25.36 × 106 g (PE) mol−1 (Co) h−1 for Co1/MAO, levels that surpass that found for most related cobalt analogues. In terms of the polymer, ultra-low molecular weight (Mw < 1.00 kg mol−1) linear polyethylene of narrow polydispersity was obtained with the Mw remaining almost constant (range: 0.500–0.600 kg mol−1) on varying the temperature, Al/Co molar ratios and reaction time, reflecting the excellent control displayed by this cobalt catalyst. Moreover, high selectivity for vinyl chain-ends was a common feature of the polymers (range: 73–97%) that could be exploited in the form of post-functionalization via epoxidation. Furthermore, a comparison of the number-average molecular weight (Mn) determined through NMR spectroscopy and GPC analysis has been studied, highlighting the merit of using NMR spectroscopy over GPC for measuring polymer molecular weight of less than 1.00 kg mol−1.
- 13 May 2025
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (23) , 2718-2731
Ultra-low-molecular-weight PE wax using a cyclohexyl-fused bis(imino)pyridine-cobalt catalyst functionalized with a remote para-phenyl group
With the goal to produce high quality polyethylene wax, five distinct bis(cyclohexyl)-fused bis(imino)pyridine-cobalt complexes, Co1–Co5, bearing a remote para-phenyl group have been synthesized and employed as precatalysts in ethylene polymerization. All complexes, under activation with methylaluminoxane (MAO) or modified MAO (MMAO), exhibited extremely high catalytic activity reaching up to 25.36 × 106 g (PE) mol−1 (Co) h−1 for Co1/MAO, levels that surpass that found for most related cobalt analogues. In terms of the polymer, ultra-low molecular weight (Mw < 1.00 kg mol−1) linear polyethylene of narrow polydispersity was obtained with the Mw remaining almost constant (range: 0.500–0.600 kg mol−1) on varying the temperature, Al/Co molar ratios and reaction time, reflecting the excellent control displayed by this cobalt catalyst. Moreover, high selectivity for vinyl chain-ends was a common feature of the polymers (range: 73–97%) that could be exploited in the form of post-functionalization via epoxidation. Furthermore, a comparison of the number-average molecular weight (Mn) determined through NMR spectroscopy and GPC analysis has been studied, highlighting the merit of using NMR spectroscopy over GPC for measuring polymer molecular weight of less than 1.00 kg mol−1.
- 11 November 2024
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 15 (48) , 4993-5006
Axial-phenyl-constrained bis(imino)acenaphthene-nickel precatalysts enhance ethylene polymerization
To enhance the performance of the bis(imino)acenaphthene-nickel precatalyst, an axial phenyl group was introduced on the acenaphthenyl backbone, and five analogues were formed: bis(aryl)imino-5-phenylacenaphthene nickel bromides (aryl: 2,6-dimethylphenyl, Ni1; 2,6-diethylphenyl, Ni2; 2,6-diisopropylphenyl, Ni3; 2,4,6-trimethylphenyl, Ni4; and 2,6-diethyl-4-methylphenyl, Ni5). The molecular structures of mononuclear Ni2 and dinuclear Ni3 were confirmed as distorted tetrahedron and square-pyramidal geometries around the nickel core, respectively. All five precatalysts achieved better activity as well as thermostability for ethylene polymerization and delivered polyethylene elastomer with higher molecular weight and more branches than the benchmark nickel precatalyst proposed by Brookhart. Specifically, Ni2/EASC maintained a catalytic activity of 4.52 × 106 g PE per mol (Ni) per h even at 100 °C. More importantly, the resultant polyethylenes exhibited excellent mechanical properties with high strain (>1000%) and stress (>10 MPa) values observed during tensile stress–strain tests. Topographic steric maps showed that there is sufficient space around the nickel center for ethylene to conduct coordination and facilitate polymeric propagation. The introduction of an axial phenyl group into the backbone of nickel complexes not only elevates the catalytic performance, but also provides these polyethylene elastomers with attractive properties.
- 11 November 2024
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 15 (48) , 4993-5006
Axial-phenyl-constrained bis(imino)acenaphthene-nickel precatalysts enhance ethylene polymerization
To enhance the performance of the bis(imino)acenaphthene-nickel precatalyst, an axial phenyl group was introduced on the acenaphthenyl backbone, and five analogues were formed: bis(aryl)imino-5-phenylacenaphthene nickel bromides (aryl: 2,6-dimethylphenyl, Ni1; 2,6-diethylphenyl, Ni2; 2,6-diisopropylphenyl, Ni3; 2,4,6-trimethylphenyl, Ni4; and 2,6-diethyl-4-methylphenyl, Ni5). The molecular structures of mononuclear Ni2 and dinuclear Ni3 were confirmed as distorted tetrahedron and square-pyramidal geometries around the nickel core, respectively. All five precatalysts achieved better activity as well as thermostability for ethylene polymerization and delivered polyethylene elastomer with higher molecular weight and more branches than the benchmark nickel precatalyst proposed by Brookhart. Specifically, Ni2/EASC maintained a catalytic activity of 4.52 × 106 g PE per mol (Ni) per h even at 100 °C. More importantly, the resultant polyethylenes exhibited excellent mechanical properties with high strain (>1000%) and stress (>10 MPa) values observed during tensile stress–strain tests. Topographic steric maps showed that there is sufficient space around the nickel center for ethylene to conduct coordination and facilitate polymeric propagation. The introduction of an axial phenyl group into the backbone of nickel complexes not only elevates the catalytic performance, but also provides these polyethylene elastomers with attractive properties.