İlKer Dursun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
İlKer Dursun has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Joao P. S. Catalao
University of Porto
2 shared publications - Akin Tascikaraoglu
Mugla Sitki Kocman University, Mugla, Turkey
1 shared publication Aleyna Erkara
Department of Electrical & Electronics Engineering, Faculty of Technology, Sakarya University of Applied Sciences, Sakarya, Türkiye
1 shared publicationAyfer Özer
1 shared publication- Ayşe Kübra Erenoğlu
Yildiz Teknik Üniversitesi
1 shared publication Feyzi Karaosmanoğlu
1 shared publication
Latest Publications
- 10 September 2026
- Published by Springer Nature in Cluster Computing
- Vol. 29 (13) , 739
Regional EV charging demand estimation based on real grid data using a hybrid stacking ensemble model
- 10 September 2026
- Published by Springer Nature in Cluster Computing
- Vol. 29 (13) , 739
Regional EV charging demand estimation based on real grid data using a hybrid stacking ensemble model
- 18 December 2025
- Published by Sakarya University of Applied Sciences in Journal of Smart Systems Research
- Vol. 6 (2) , 93-109
Kimya Endüstrisinde Yapay Zeka Destekli Enerji Verimliliği Sınıflandırması: SHAP Tabanlı Bir Uygulama
Bu çalışma, endüstriyel üretimde enerji verimliliğini iyileştirmek amacıyla, açıklanabilir yapay zeka yaklaşımıyla desteklenen bir tahmin ve sınıflandırma modeli geliştirmeyi hedeflemektedir. Çalışmanın odak noktası, kimya endüstrisine ait üretim tesislerinden elde edilen açık veri setleri üzerinde yapılan analizler yoluyla, üretim birimlerinin enerji tüketim davranışlarını anlamak ve bu davranışlara yönelik karar destek sistemleri üretmektir. Bu bağlamda, Amerika Birleşik Devletleri Enerji Bakanlığı’na bağlı OpenEI platformu tarafından yayımlanan Foundational Industrial Energy Dataset veri seti kullanılmış ve NAICS 325 koduyla sınıflandırılan kimya endüstrisine ait üretim birimleri çalışmaya dâhil edilmiştir. Veri setindeki değişkenler, birim tipi, yakıt türü, tasarım kapasitesi ve enerji tüketimi gibi üretimle doğrudan ilişkili teknik parametreleri kapsamaktadır. Enerji verimliliği göstergesi olarak, birim kapasitesi başına tüketilen enerji miktarını ifade eden metrik türetilmiş ve bu göstergeye göre hem regresyon hem de sınıflandırma analizleri gerçekleştirilmiştir. Çalışmada Random Forest Regressor ve Linear Regression algoritmaları kullanılmış; model başarımı R² ve MSE metrikleri üzerinden değerlendirilmiştir. Random Forest algoritması, veri yapısına daha uygun sonuçlar üretmiş ve daha yüksek performans göstermiştir. Modelin yalnızca tahmin başarısı değil, aynı zamanda kararların şeffaflığı ve yorumlanabilirliği de değerlendirilmiştir. Bu amaçla SHAP yöntemi kullanılarak, her bir üretim değişkeninin model sonuçlarına etkisi sayısal olarak analiz edilmiş ve modelin karar alma süreci açıklanabilir hâle getirilmiştir. Özellikle bazı değişkenlerin enerji verimliliği üzerinde anlamlı etkiler yarattığı görülmüş, bu ilişkiler SHAP özet ve bağımlılık grafikleri ile görselleştirilmiştir. Ayrıca enerji verimliliği sadece sürekli bir değişken olarak değil, belirli eşiklerle düşük, orta ve yüksek verimli birimler şeklinde sınıflandırılmış; bu sayede karar vericilere yönelik daha uygulanabilir içgörüler sunulmuştur. Sınıf dağılımı grafikleri ve başarı skorları da bu yaklaşımın karar destek sistemlerine katkı potansiyelini ortaya koymuştur. Sonuç olarak bu çalışma, açıklanabilir yapay zeka tabanlı analizlerin, endüstriyel enerji verimliliği alanında nasıl etkili şekilde kullanılabileceğini göstermektedir. Hem sektör özelinde hem de yöntemsel olarak özgün bir katkı sunan bu çalışma, sürdürülebilir üretim ve enerji yönetimi hedefleri doğrultusunda önemli bir araç olma potansiyeli taşımaktadır.
- 18 December 2025
- Published by Sakarya University of Applied Sciences in Journal of Smart Systems Research
- Vol. 6 (2) , 93-109
Kimya Endüstrisinde Yapay Zeka Destekli Enerji Verimliliği Sınıflandırması: SHAP Tabanlı Bir Uygulama
Bu çalışma, endüstriyel üretimde enerji verimliliğini iyileştirmek amacıyla, açıklanabilir yapay zeka yaklaşımıyla desteklenen bir tahmin ve sınıflandırma modeli geliştirmeyi hedeflemektedir. Çalışmanın odak noktası, kimya endüstrisine ait üretim tesislerinden elde edilen açık veri setleri üzerinde yapılan analizler yoluyla, üretim birimlerinin enerji tüketim davranışlarını anlamak ve bu davranışlara yönelik karar destek sistemleri üretmektir. Bu bağlamda, Amerika Birleşik Devletleri Enerji Bakanlığı’na bağlı OpenEI platformu tarafından yayımlanan Foundational Industrial Energy Dataset veri seti kullanılmış ve NAICS 325 koduyla sınıflandırılan kimya endüstrisine ait üretim birimleri çalışmaya dâhil edilmiştir. Veri setindeki değişkenler, birim tipi, yakıt türü, tasarım kapasitesi ve enerji tüketimi gibi üretimle doğrudan ilişkili teknik parametreleri kapsamaktadır. Enerji verimliliği göstergesi olarak, birim kapasitesi başına tüketilen enerji miktarını ifade eden metrik türetilmiş ve bu göstergeye göre hem regresyon hem de sınıflandırma analizleri gerçekleştirilmiştir. Çalışmada Random Forest Regressor ve Linear Regression algoritmaları kullanılmış; model başarımı R² ve MSE metrikleri üzerinden değerlendirilmiştir. Random Forest algoritması, veri yapısına daha uygun sonuçlar üretmiş ve daha yüksek performans göstermiştir. Modelin yalnızca tahmin başarısı değil, aynı zamanda kararların şeffaflığı ve yorumlanabilirliği de değerlendirilmiştir. Bu amaçla SHAP yöntemi kullanılarak, her bir üretim değişkeninin model sonuçlarına etkisi sayısal olarak analiz edilmiş ve modelin karar alma süreci açıklanabilir hâle getirilmiştir. Özellikle bazı değişkenlerin enerji verimliliği üzerinde anlamlı etkiler yarattığı görülmüş, bu ilişkiler SHAP özet ve bağımlılık grafikleri ile görselleştirilmiştir. Ayrıca enerji verimliliği sadece sürekli bir değişken olarak değil, belirli eşiklerle düşük, orta ve yüksek verimli birimler şeklinde sınıflandırılmış; bu sayede karar vericilere yönelik daha uygulanabilir içgörüler sunulmuştur. Sınıf dağılımı grafikleri ve başarı skorları da bu yaklaşımın karar destek sistemlerine katkı potansiyelini ortaya koymuştur. Sonuç olarak bu çalışma, açıklanabilir yapay zeka tabanlı analizlerin, endüstriyel enerji verimliliği alanında nasıl etkili şekilde kullanılabileceğini göstermektedir. Hem sektör özelinde hem de yöntemsel olarak özgün bir katkı sunan bu çalışma, sürdürülebilir üretim ve enerji yönetimi hedefleri doğrultusunda önemli bir araç olma potansiyeli taşımaktadır.
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Enhancing Grid Efficiency With Second‐Use BESS: A Sea Horse Optimizer‐Based Approach for PV‐Integrated Distribution Systems
Ensuring voltage stability, minimizing technical losses, and reducing long‐term energy costs remain critical challenges in distribution networks with high photovoltaic (PV) penetration. This study introduces a unified optimization approach based on the bio‐inspired sea horse optimizer (SHO) to determine the optimal placement and sizing of second‐use battery energy storage systems (BESSs) in PV‐integrated radial networks. Unlike conventional single‐objective methods, the proposed SHO‐based multiobjective optimization simultaneously addresses five targets: (i) active power‐loss reduction, (ii) voltage‐profile improvement, (iii) operating‐cost minimization, (iv) reliability enhancement through the loss of power supply probability (LPSP), and (v) economic feasibility via the levelized cost of energy (LCE). A 24‐h MATPOWER simulation was carried out on the IEEE‐33 and IEEE‐69 bus systems, incorporating realistic PV generation, time‐varying loads, and constrained BESS operation with state‐of‐health (SoH) and depth‐of‐discharge (DoD) limits, state‐of‐charge (SOC) between 20% and 85%, and round‐trip efficiency of 80%–83%. For the IEEE‐33 system, the optimal configuration deployed 1200 kWh BESS and 1000 kW PV, reducing power loss from 219.3 to 20.55 kW (≈90.6% reduction), improving the minimum voltage to 0.968 p.u., lowering voltage deviation to 1.2%, cutting LPSP from 42% to 18%, and decreasing LCE from 110 to 85 $/MWh. For the IEEE‐69 system, the optimized allocation of 1500 kWh BESS and 1500 kW PV reduced losses from 225.3 to 31.86 kW (≈85.9% reduction), increased the minimum voltage to 0.965 p.u., reduced deviation to 2.1%, lowered LPSP from 31% to 12%, and decreased LCE from 96 to 85 $/MWh. Comparative analysis against genetic algorithm (GA), WOA, and CSA confirmed that the SHO algorithm consistently achieved the lowest losses and fastest convergence. Overall, the SHO‐based multiobjective optimization approach effectively determines both placement and sizing of PV and second‐use BESS, ensuring technical efficiency, improved reliability, and economic sustainability for modern distribution networks.
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Open AccessEnhancing Grid Efficiency With Second‐Use BESS: A Sea Horse Optimizer‐Based Approach for PV‐Integrated Distribution Systems
Ensuring voltage stability, minimizing technical losses, and reducing long‐term energy costs remain critical challenges in distribution networks with high photovoltaic (PV) penetration. This study introduces a unified optimization approach based on the bio‐inspired sea horse optimizer (SHO) to determine the optimal placement and sizing of second‐use battery energy storage systems (BESSs) in PV‐integrated radial networks. Unlike conventional single‐objective methods, the proposed SHO‐based multiobjective optimization simultaneously addresses five targets: (i) active power‐loss reduction, (ii) voltage‐profile improvement, (iii) operating‐cost minimization, (iv) reliability enhancement through the loss of power supply probability (LPSP), and (v) economic feasibility via the levelized cost of energy (LCE). A 24‐h MATPOWER simulation was carried out on the IEEE‐33 and IEEE‐69 bus systems, incorporating realistic PV generation, time‐varying loads, and constrained BESS operation with state‐of‐health (SoH) and depth‐of‐discharge (DoD) limits, state‐of‐charge (SOC) between 20% and 85%, and round‐trip efficiency of 80%–83%. For the IEEE‐33 system, the optimal configuration deployed 1200 kWh BESS and 1000 kW PV, reducing power loss from 219.3 to 20.55 kW (≈90.6% reduction), improving the minimum voltage to 0.968 p.u., lowering voltage deviation to 1.2%, cutting LPSP from 42% to 18%, and decreasing LCE from 110 to 85 $/MWh. For the IEEE‐69 system, the optimized allocation of 1500 kWh BESS and 1500 kW PV reduced losses from 225.3 to 31.86 kW (≈85.9% reduction), increased the minimum voltage to 0.965 p.u., reduced deviation to 2.1%, lowered LPSP from 31% to 12%, and decreased LCE from 96 to 85 $/MWh. Comparative analysis against genetic algorithm (GA), WOA, and CSA confirmed that the SHO algorithm consistently achieved the lowest losses and fastest convergence. Overall, the SHO‐based multiobjective optimization approach effectively determines both placement and sizing of PV and second‐use BESS, ensuring technical efficiency, improved reliability, and economic sustainability for modern distribution networks.
- Open Access
- 30 November 2023
- Published by Bilecik Seyh Edebali Universitesi Fen Bilimleri Dergisi in Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
- Vol. 10 (2) , 414-422
Enerji Depolamalı Bir Güneş Enerjisi Sisteminde Tepe Tıraşlama ile Yük Profilinin İyileştirilmesi
Artan nüfus, gelişen sanayi ve teknoloji, enerjiye olan talebi her geçen arttırmaktadır. Bununla beraber, küresel ısınma, iklim değişiklikleri ve sürdürülebilirlik gibi etkenler, ilgiyi yenilebilir enerjiye kaydırmaktadır. Ancak yenilebilir enerji sistemlerinin de düzensiz üretim rejimleri nedeniyle, elektrik şebekelerinde istenilen esneklik sağlanamamaktadır. Bu soruna çözüm olarak, yenilenebilir enerji sistemlerinde enerji depolama tesislerinin kurulması fikri ortaya çıkmıştır. Bu çalışmada, bir üniversite yerleşkesinin bir yıllık gerçek elektrik tüketim değerleri incelenmiş, bu yerleşkeye enerji depolamalı bir güneş enerji sisteminin (GES) kurulması durumundaki elektrik üretim ve tüketim değerleri analiz edilmiş, enerji depolama sistemi ile tepe yük tıraşlama yapılarak yük profilinin iyileştirilmesi gerçekleştirilmiştir. Günlük, haftalık, aylık ve yıllık enerji üretim-tüketim değerleri detaylı olarak incelenmiş, yaz ve kış dönemlerinde elektrik üretim ve tüketim profillerindeki değişim, yük tıraşlama ve yenilebilir enerji üretimi ile elektrik şebekesine olan katkılarla beraber, çevresel ve ekonomik etkiler de ele alınmıştır.
- 30 November 2023
- Published by Bilecik Seyh Edebali Universitesi Fen Bilimleri Dergisi in Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
- Vol. 10 (2) , 414-422
Open AccessEnerji Depolamalı Bir Güneş Enerjisi Sisteminde Tepe Tıraşlama ile Yük Profilinin İyileştirilmesi
Artan nüfus, gelişen sanayi ve teknoloji, enerjiye olan talebi her geçen arttırmaktadır. Bununla beraber, küresel ısınma, iklim değişiklikleri ve sürdürülebilirlik gibi etkenler, ilgiyi yenilebilir enerjiye kaydırmaktadır. Ancak yenilebilir enerji sistemlerinin de düzensiz üretim rejimleri nedeniyle, elektrik şebekelerinde istenilen esneklik sağlanamamaktadır. Bu soruna çözüm olarak, yenilenebilir enerji sistemlerinde enerji depolama tesislerinin kurulması fikri ortaya çıkmıştır. Bu çalışmada, bir üniversite yerleşkesinin bir yıllık gerçek elektrik tüketim değerleri incelenmiş, bu yerleşkeye enerji depolamalı bir güneş enerji sisteminin (GES) kurulması durumundaki elektrik üretim ve tüketim değerleri analiz edilmiş, enerji depolama sistemi ile tepe yük tıraşlama yapılarak yük profilinin iyileştirilmesi gerçekleştirilmiştir. Günlük, haftalık, aylık ve yıllık enerji üretim-tüketim değerleri detaylı olarak incelenmiş, yaz ve kış dönemlerinde elektrik üretim ve tüketim profillerindeki değişim, yük tıraşlama ve yenilebilir enerji üretimi ile elektrik şebekesine olan katkılarla beraber, çevresel ve ekonomik etkiler de ele alınmıştır.
- Open Access
- 12 December 2020
- Published by MDPI AG in Electronics
- Vol. 9 (12) , 2127
Practical Evidence-Based Evaluation of a Combined Heat Reduction Technique for Power Transformer Buildings
Transformer buildings are at the heart of the effective operation of distribution systems, and heating problems of transformers under severe operational conditions are among the main factors affecting the lifetime, efficiency, technical losses, etc., of such important power system assets. It is crucial that the inside temperature of transformer buildings is higher than the outside temperature due to the operation of the transformer and the effect of ambient conditions. This issue may cause several problems such as additional transformer aging, losses, and moisture. The main purpose of this study is to decrease the inside temperature of transformer buildings; in other words, to prevent the inside temperature from being higher than the outside temperature. To realize this, it is recommended to apply a combined heat reduction technique by covering the outer surface with a reflective surface and use a low-emitting material on the inner surface. The relevant results of the practical evidence in this manner are presented in detail at a distribution system in Turkey with different climate and loading conditions in the summertime.
- 12 December 2020
- Published by MDPI AG in Electronics
- Vol. 9 (12) , 2127
Open AccessPractical Evidence-Based Evaluation of a Combined Heat Reduction Technique for Power Transformer Buildings
Transformer buildings are at the heart of the effective operation of distribution systems, and heating problems of transformers under severe operational conditions are among the main factors affecting the lifetime, efficiency, technical losses, etc., of such important power system assets. It is crucial that the inside temperature of transformer buildings is higher than the outside temperature due to the operation of the transformer and the effect of ambient conditions. This issue may cause several problems such as additional transformer aging, losses, and moisture. The main purpose of this study is to decrease the inside temperature of transformer buildings; in other words, to prevent the inside temperature from being higher than the outside temperature. To realize this, it is recommended to apply a combined heat reduction technique by covering the outer surface with a reflective surface and use a low-emitting material on the inner surface. The relevant results of the practical evidence in this manner are presented in detail at a distribution system in Turkey with different climate and loading conditions in the summertime.
- 24 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 9 (4) , 3871-3882
Comprehensive Optimization Model for Sizing and Siting of DG Units, EV Charging Stations, and Energy Storage Systems
The sizing and siting of renewable resources based distributed generation (DG) units has been a topic of growing interest, especially during the last decade due to the increasing interest in renewable energy systems and the possible impacts of their volatility on distribution system operation. This study goes beyond the existing literature by presenting a comprehensive optimization model for the sizing and siting of different renewable resources based DG units, electric vehicle (EV) charging stations and energy storage systems (ESSs) within the distribution system. The proposed optimization model is formulated as a second order conic programming problem, considering also the time-varying nature of DG generation and load consumption, in contrast with the majority of the relevant studies that have been based on static values.
- 24 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 9 (4) , 3871-3882
Comprehensive Optimization Model for Sizing and Siting of DG Units, EV Charging Stations, and Energy Storage Systems
The sizing and siting of renewable resources based distributed generation (DG) units has been a topic of growing interest, especially during the last decade due to the increasing interest in renewable energy systems and the possible impacts of their volatility on distribution system operation. This study goes beyond the existing literature by presenting a comprehensive optimization model for the sizing and siting of different renewable resources based DG units, electric vehicle (EV) charging stations and energy storage systems (ESSs) within the distribution system. The proposed optimization model is formulated as a second order conic programming problem, considering also the time-varying nature of DG generation and load consumption, in contrast with the majority of the relevant studies that have been based on static values.
- 1 January 2016
- Published by EJournal Publishing in International Journal of Electronics and Electrical Engineering
Reconfiguration of Actual Distribution Network with Optimum Power Flow for Loss Reduction
International Journal of Electronics and Electrical Engineering
- 1 January 2016
- Published by EJournal Publishing in International Journal of Electronics and Electrical Engineering
Reconfiguration of Actual Distribution Network with Optimum Power Flow for Loss Reduction
International Journal of Electronics and Electrical Engineering