YLYang Liu

Yang Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yang Liu has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    TEM Analysis of Orientational Domain Evolution Triggered by Structural Phase Transition in Bi0.25Ca0.75MnO3 Ceramics

    by Changjiang Nie, Hengxue Wang, Zhihong Chen, Junyan Wang, Huaqing Xiao, Yang Liu

    The structural phase transition and associated orientational domain configurations in perovskite-type BixCa1−xMnO3 ceramics were investigated in this work. A series of BixCa1−xMnO3 solid solutions with x = 0.05, 0.25, 0.33 were synthesized, and Bi0.25Ca0.75MnO3 with moderate orthorhombic lattice distortion was selected as the representative sample for systematic TEM characterization. Upon cooling from high temperature, the material undergoes a symmetry-lowering transition from the cubic phase with Pm3¯m space group to the orthorhombic phase with Pnma space group. Selected-area electron diffraction (SAED) and bright-field TEM observations reveal the formation of multiple orientational domains, including both 90° and 120° configurations, within individual grains. High-resolution TEM (HRTEM) further confirms the coexistence of three distinct domain orientations at the atomic scale, with well-defined lattice fringes and domain boundaries. The reciprocal-space orientational relationships derived from SAED patterns demonstrate that these domains originate from the symmetry breaking of the parent cubic lattice during the phase transition. These findings provide direct crystallographic insight into the domain structures of BCMO, and such microstructural features are essential for revealing the structural stability and intrinsic functional behaviors of BCMO manganites.

  • Open Access

    Enhanced Electrochemical Performance of Surface-Modified LiNi0.5Mn1.5O4 Cathode at High Voltages

    by Zeng Yan, Songsong Wang, Fulong Hu, Shuai Lu, Yang Liu, Qian Peng, Zhen Yao, Wei Liu

    Spinel LiNi0.5Mn1.5O4 (LNMO) has emerged as a highly competitive cobalt-free cathode material for higher-energy-density lithium-ion batteries. However, its practical application is hindered by severe capacity degradation, particularly under high-voltage operation. To solve this problem, we put forward a surface modification strategy employing a Li0.4La0.54TiO3 (LLTO) coating. The LLTO coating forms a protective cathode–electrolyte interphase that helps to inhibit interfacial side reactions, enabling enhanced electrochemical performance up to 5 V. As a result, the optimized 1 wt% LLTO-coated LNMO exhibits a remarkable capacity retention of 96.5% after 200 cycles at 0.1 C and delivers a high-rate capacity of 103.5 mAh g−1 at 2 C, significantly outperforming its pristine counterpart (86.8% and 89.6 mAh g−1, respectively). This work provides a viable and efficient surface modification approach for achieving robust high-voltage LNMO cathode material, underscoring its great potential for next-generation energy storage systems.


  • Open Access

    Crystal Structure and Magnetic Modulation of Rubidium-Intercalated 2-Phenylnaphthalene

    by Xiaolin Wu, Hui Yang, Mingan Fu, Shan Peng, Yang Liu, Chuanyang Zhao, Debing Long, Yun Gao, Zhongbing Huang

    Intercalation of alkali metals into aromatic hydrocarbons offers significant potential for achieving organic magnetism. In this study, rubidium-intercalated 2-phenylnaphthalene molecular crystals were synthesized successfully by ultrasonic treatment and low-temperature annealing. Magnetic measurements demonstrate that the rubidium-intercalated samples exhibit typical Curie paramagnetism with a molar magnetic moment of approximately 0.44 μB. XRD and Raman spectroscopy measurements confirm that the structure and vibration information on the prepared samples differ from those of pristine 2-phenylnaphthalene, indicating that a new structure is formed by intercalating preparation. First-principles calculations yield optimized theoretical structures and magnetic moments that align with experimental observations, suggesting that Rb-5s electrons from intercalated rubidium are transferred to the C-2p orbitals of the organic molecules. Upon application of pressure, the intercalated crystal is predicted to transit from an antiferromagnetic to a nonmagnetic metallic state. These findings demonstrate that introducing rubidium atoms with strong reducing ability into aromatic hydrocarbons provides new opportunities for developing the magnetic properties of these materials.


  • MXene Ti 3 CNT x for near-infrared plasmonics and high broadband absorption

    by Yang Liu, Xiao Lin Wu, Shasha Ye, Qian Peng, Qingdong Zeng, Zeng Yan, Huaqing Yu

    Nanostructure-mediated manipulation of light propagation has enabled the demonstration of advanced metamaterial absorbers that have improved the performance of optoelectronic and nanophotonic energy harvesting systems. In this work, MXene Ti 3 CNT x thin films are prepared and demonstrated as an addition to the plasmonic material database in the near-infrared (NIR) region. Additionally, the optical properties of periodic Ti 3 CNT x nanodisk arrays are investigated through both experimental and simulation studies. It is found that the Ti 3 CNT x /Al 2 O 3 nanodisk arrays on Ag film exhibit enhanced localized and gap surface plasmon resonance at NIR wavelengths. These resonances are characterized by electric field concentration in the dielectric gap between the MXene and Ag. The synergistic combination of optical losses inherent in Ti 3 CNT x and scattering enhancement at the resonances of the nanoarrays can achieve high and stable light absorption (>95%) in the NIR. The obtained near-perfect absorption (∼99%) at a wavelength of 1.55 μm demonstrates about a 10% improvement over Ti 3 C 2 T x nanoarrays. These findings establish Ti 3 CNT x MXene as a promising platform for plasmonic applications and provide critical insights for designing advanced metasurface absorbers.


  • Open Access

    Recent Advances in Silver Nanowire-Based Transparent Conductive Films: From Synthesis to Applications

    by Ji Li, Jun Luo, Yang Liu

    Silver nanowire (AgNW)-based transparent conductive films are essential for flexible electronics due to their superior optoelectronic properties and mechanical flexibility. This review examines the characteristics and fabrication methods of AgNW thin films in detail. Among various fabrication techniques, the AgNW thin film produced by silk-screen printing exhibits the highest quality factor of 568.47, achieving 95.3% visible light transmittance of 95.3% and 13.6 Ω/sq sheet resistance. Ensuring the stability of AgNW films requires the deposition of protective layers through physical or chemical approaches. This review also systematically evaluates the different methods for preparing these protective layers, including their respective advantages and limitations. Furthermore, the review proposes strategies to enhance the conductivity, transparency, and flexibility of AgNW films. Finally, it discusses potential future applications and challenges, offering valuable insights for the development of next-generation flexible transparent electrodes.


  • Open Access

    Recent Advances in Silver Nanowire Transparent Conductive Films: From Synthesis to Applications

    by Ji Li, Jun Luo, Yang Liu

    Silver nanowires (AgNWs)-based transparent conductive films are critical for flexible electronics due to their excellent optoelectronic properties and mechanical flexibility. We discussed the preparation methods of AgNWs films, including Mayer rod coating, spray coating, spin coating, screen printing, and inkjet printing, and analyzed their advantages, limitations, and applicable scenarios. Furthermore, we systematically explored anti-oxidation strategies for AgNWs, such as surface modification, composite structure design, and process optimization. Potential approaches to enhance the conductivity, transparency, and flexibility of AgNWs films were also outlined. Finally, we discussed future applications and challenges, offering insights for the development of next-generation flexible transparent electrodes.


  • High transparent conductive Mg, Al, and Ga co-doped ZnO multilayer thin films with Cu interlayer: fabrication, structure, and characteristics

    by Yang Liu, Duoyin Wang, Boyun Wang

    Overcoming the challenge of preparing high-transparency and low-resistivity thin films is of great significance for the development of indium-free transparent electrodes. In the present work, high-quality Mg, Al, and Ga co-doped ZnO (MAGZO)/Cu/MAGZO multilayer thin films are deposited on glass by magnetron sputtering. The effects of Cu layer thickness (dCu) on the structural, morphological, optical, and electrical characteristics of the films are investigated in detail. With increasing dCu from 0 to 25 nm, the growth orientation of (002) ZnO crystal weakens, while that of (111) Cu crystal strengthens, and the surface of the films exhibits uniform, low roughness, and defect-free characteristics. Additionally, both the resistivity and the optical transmittance generally decrease with increasing Cu layer thickness. Interestingly, the average visible transmittance has a reverse change as dCu increases from 5 to 11 nm, resulting in the optimal photoelectric performance of the multilayers at dCu = 11 nm: the figure of merit of 9.42 × 10−3 Ω-1 with the resistivity of 1.24 × 10−4 Ω cm and the visible transmittance of 84.2%. Compared with other reported sandwich transparent conductive films, it is found that doping Mg in the oxide layer is the key to improving the overall optoelectronic properties of the multilayers.


  • Thickness-dependent optical properties of low-loss transdimensional plasmonic Sr0.82NbO3 thin films

    by Yang Liu, Huaqing Yu, Qingdong Zeng, Boyun Wang, Qian Peng

    To develop alternative plasmonic materials for nanophotonic applications, the thickness-dependent optical properties of ultrathin plasmonic Sr0.82NbO3 (SNO) films deposited on MgO are investigated. As the thickness decreases from 10 to 2 nm, the film exhibits less metallic, epsilon-near-zero (ENZ) wavelength redshift and higher optical loss due to increased scattering. Nevertheless, the thinnest film still has a high carrier concentration of 1022 cm−3, and the real part of the dielectric functions of all films is less than zero in the near-infrared (NIR) wavelength region, indicating that the samples possess relatively high metallicity and plasmonic characteristics in the NIR. It is found that the carrier concentration dominates the electron effective mass and Drude plasma frequency. Although Au is a commonly used plasmonic material, at a wavelength of 1550 nm, the loss of SNO is 85.8% lower than that of Au, and its plasmonic performance metrics is significantly higher than TiN, Al:ZnO and Sn:In2O3, demonstrating the great potential of SNO in NIR plasmonic device applications.


  • High transparent conductive Ga-doped ZnO-based multilayer thin films with embedded ultrathin TiN layer deposited in oxygen-containing atmosphere

    by Yang Liu, Huaqing Yu, Qingdong Zeng, Qingyu Ruan

    To avoid metal layer oxidation during the deposition of transparent conductive oxide (TCO)/metal/TCO multilayer films in an oxygen-containing atmosphere, the ultra-thin (−1 Ω−1): resistivity of 4.68 × 10−5 Ω cm, and optical transmittance of above 91% in the visible region, which is superior to the sandwich film with the metal embedded layer.


  • An 80-dB Dynamic Range Hybrid Pulse-Phase Analog Front-End Circuit Cooperating With a Low-Resolution TDC for LiDAR

    by Zeli Li, Tianrui Lyu, Kaiyou Li, Haoxin Zheng, Zhuohang Ye, Shengzhao Su, Jianping Guo, Yang Liu

    Light detection and ranging (LiDAR) systems sense the distance by illuminating a target and detecting the reflected optical signal. Depending on the modulation method, LiDAR systems can be categorized into three types: pulse time-of-flight (ToF) [1], [2], phase-shift (PS) [3], and frequency-modulated continuous-wave (FMCW), where the pulse and PS are more widely used than FMCW. Fig. 1 illustrates the principle of ToF and PS methods. The accuracy of ToF measurements, as shown in equation (1) of Fig. 1, depends on the precision of the flight time measurement, which typically requires a picosecond-level time-to-digital converter (TDC) for high precision ranging of millimeter level. As for PS ranging, the carrier frequency limits the maximum detectable ambiguity, which is known as $2\pi$ limitation as indicated by equation (2). Although multi-frequency ranging can be used to achieve high precision and extend the measurement scope [4], it increases the design complexity of the ranging system. A hybrid pulse-phase ranging system based on an under-sampling technique is proposed in [5]. However, the maximum detectable range is limited by the carrier frequency, resulting in slow phase discrimination compared to prior work.