RPRonja Pappenberger

Ronja Pappenberger

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ronja Pappenberger has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Front Cover: Benchmarking Inorganic Deposition Routes for Hybrid Two‐Step Processed Perovskite Solar Cells: A Materials Perspective (Sol. RRL 4/2026)

    by Julian Petry, Ronja Pappenberger, Alexander Welle, Tonghan Zhao, Alexander Diercks, Raphael Pesch, Moritz Krause, Paul Fassl, Ulrich W. Paetzold

  • Open Access

    Benchmarking Inorganic Deposition Routes for Hybrid Two‐Step Processed Perovskite Solar Cells: A Materials Perspective

    by Julian Petry, Ronja Pappenberger, Alexander Welle, Tonghan Zhao, Alexander Diercks, Raphael Pesch, Moritz Krause, Paul Fassl, Ulrich W. Paetzold

    As the perovskite solar cell (PSC) industry moves toward large‐scale manufacturing, production processes must enable high‐throughput fabrication and simple process integration. The hybrid two‐step deposition route has emerged as a promising method for achieving conformal coatings on micron‐scale textures, a critical feature for perovskite/silicon tandem photovoltaics. In this work, we present a fully sequential route, wherein the inorganic materials CsCl and PbI 2 are deposited separately, allowing for facile industrial implementation as compared to the commonly codeposited inorganic scaffold. Microstructural analysis reveals a change in preferred crystal orientation of the PbI 2 platelets with codeposition resulting in horizontal growth, whereas sequential deposition promotes vertical growth with a secondary tilted orientation. Elemental mapping of the final perovskite absorber shows homogeneous distribution of Cs, formamidinium, and I, while Pb and Cl largely retain their initial scaffold positions. PSCs fabricated via sequential deposition of the inorganic scaffold demonstrate improved process repeatability and reach an efficiency of 20.3%, ranking among the highest reported efficiencies for wide‐bandgap hybrid two‐step processed PSCs. These findings underscore the potential of fully sequential hybrid deposition as a viable route toward industrial PSC production.


  • Open Access

    Efficient Perovskite/Silicon Tandem Solar Cells Using Hybrid Two‐Step Inkjet Printing with Edge Isolation Precision

    by Raphael Pesch, Julian Petermann, Ronja Pappenberger, Theresa Kuechle, Johannes Schenck, Lena Paula Rothbauer, Lingyi Fang, Xuzheng Liu, Saeid Rafizadeh, Bahram Abdollahi Nejand, et al.

  • Open Access

    Efficient Perovskite/Silicon Tandem Solar Cells Using Hybrid Two‐Step Inkjet Printing with Edge Isolation Precision

    by Raphael Pesch, Julian Petermann, Ronja Pappenberger, Theresa Kuechle, Johannes Schenck, Lena Paula Rothbauer, Lingyi Fang, Xuzheng Liu, Saeid Rafizadeh, Bahram Abdollahi Nejand, et al.

    Developing high‐efficiency perovskite/silicon tandem solar cells (PSTs) using scalable deposition methods is crucial for the industrialization of next‐generation photovoltaics. However, developing industrially viable deposition techniques to ensure high performance, uniformity, and compatibility with existing silicon manufacturing remains a key challenge. A scalable hybrid two‐step deposition process, combining evaporation and inkjet printing, is presented for fabrication of high‐performance PSTs. Wide bandgap perovskite solar cells are achieved with power conversion efficiencies (PCEs) of up to 19.8%. Applying this approach to textured silicon bottom cells, the process ensures conformal perovskite growth, critical for industry‐relevant tandem integration. Using this technique, highly efficient, fully textured PSTs with a PCE of 27.4% are fabricated. Homogeneous perovskite thin films are formed up to the substrate's very edge, enabling industry standards for silicon edge isolation. These results highlight the potential of hybrid two‐step inkjet printing for scalable, high‐efficiency PST fabrication, paving the way for industrial adoption.


  • Open Access

    Versatile Two‐Step Process for Perovskite‐Based Tandem Photovoltaics

    by Ronja Pappenberger, Roja Singh, Alexander Diercks, Tonghan Zhao, Raphael Pesch, Julian Petry, Daniel Baumann, Xuzheng Liu, Ulrich W. Paetzold

    Perovskite photovoltaics promise high power conversion efficiencies (PCEs) and cost‐effective fabrication, making them a transformative solar technology. Among deposition methods, the solution‐based two‐step process has emerged as a promising approach for integrating high‐quality perovskite layers onto silicon (Si) bottom cells, enabling dense and pinhole‐free films. However, achieving both high efficiency and long‐term stability remains underexplored for solution‐based two‐step‐processed perovskite solar cells (PSCs). This study introduces a versatile solution‐based two‐step method, demonstrating a seamless transition from a triple‐cation (CsMAFA) to a more stable double‐cation (CsFA) perovskite composition. Implementing a novel dual bimolecular passivation strategy with propane‐1,3‐diammonium iodide (PDAI2) and n‐butylammonium iodide (BAI) for both bulk and surface passivation effectively addresses defects at grain boundaries and interfaces. This approach minimizes nonradiative recombination, enhances film crystallization, and promotes efficient charge extraction. The resulting PSCs demonstrate a stable power output of 20.9%, representing the highest reported efficiency for a solution‐based two‐step processed PSC with a bandgap of 1.67 eV. Laboratory‐scale monolithic perovskite/Si tandem solar cells (1 cm2 active area) achieve PCEs exceeding 26% on small‐textured Si bottom cells (<2 μm). This emphasizes the potential of the solution‐based two‐step process for practical implementation in high‐performance photovoltaic systems.


  • Open Access

    Spatially Regulated Gas Flow Control for Batch‐Drying of Large Area Slot‐Die‐Coated Perovskite Thin Films

    by Kristina Geistert, Ronja Pappenberger, Philip Scharfer, Philipp Cavadini, Wilhelm Schabel, Faranak Sadegh, David B. Ritzer, Bahram Abdollahi Nejand, Ulrich W. Paetzold

    Innovations in scalable fabrication processes are pivotal for transferring record power conversion efficiencies (PCEs) of spin‐coated perovskite/silicon‐based tandem solar cells (TSCs) from the laboratory scale to full‐size photovoltaics. In this regard, the homogeneous large‐area drying of precursor ink wet films poses one of the major hurdles. Gas‐assisted drying by linear high‐pressure slot jets comes along with an inhomogeneous flow field, causing unwanted backflows, non‐uniform drying patterns, and strong inhomogeneities at the sample edges. In response, it is demonstrated i) a new 2D comb‐nozzle (CN) drying technique that improves the homogeneity of drying processes and, ii) an adjusted strategy to fabricate high‐quality 2‐step slot‐die (SD)‐coated triple‐halide perovskite thin films. Remarkably, homogeneous and pinhole‐free large‐area SD‐coated perovskite SCs fabricated is demonstrated with all scalable techniques reaching up to 19.6% with enhanced mean PCE‐yields of 90% (compared to 62% with slot‐jet drying). Consequently, the CN drying method is employed for a material composition suitable for tandem applications (Eg ≈1.68 eV). Particularly, the reproducible fabrication of TSCs with PCEs up to 24.6% on large areas with homogeneous PCE variances of ±0.7%abs imply high homogeneity during the coating and drying process and confirms the importance of systematically controlled drying within an optimized 2‐step process.


  • Open Access

    Imaging of Recombination Rates and Lifetime in Perovskite Thin Film Processing

    by Benjamin Hacene, Nils W. Rosemann, Julie Roger, Xuzheng Liu, Daniel O. Baumann, Ronja Pappenberger, Mohammad Gholipoor, Hannah Racky, Paul Fassl, Ian A. Howard, et al.

    Large‐scale fabrication and optimization of high‐quality polycrystalline perovskite thin films present significant challenges in scientific research and industry. Shifting from single‐spot measurements to imaging techniques facilitates the transition from laboratory‐scale to large‐scale processing. While single‐spot photoluminescence (PL) methods provide high‐depth insights into local optoelectronic characteristics, they are insufficient for assessing reliable information on homogeneity and spatial characteristics. Currently, no PL‐based imaging method delivers a comparable level of information depth on charge carrier dynamics to single‐spot PL methods. In response, this work introduces a non‐invasive imaging technique based on double‐pulse excitation. Varying the time delay between the pulses gives rise to spatial information on relative photoluminescence quantum yield (rPLQY) in thin films, yielding fundamental optoelectronic characteristics such as external radiative and effective non‐radiative recombination rates and charge‐carrier lifetime. Compared to traditional PL‐imaging and k‐imaging demonstrates the superiority of rPLQY‐imaging in revealing charge carrier dynamics. This technique proves applicable across various sample configurations, irrespective of the presence of electrodes and charge transport layers. In addition, the method can estimate surface recombination velocity and variations in escape and parasitic absorption probabilities. Overall, the rPLQY‐imaging method emerges as a valuable tool for scientific research aimed at characterizing and optimizing large‐area perovskite thin films.


  • Hybrid Two‐Step Inkjet‐Printed Perovskite Solar Cells

    by Raphael Pesch, Alexander Diercks, Julian Petry, Alexander Welle, Ronja Pappenberger, Fabian Schackmar, Helge Eggers, Johannes Sutter, Ulrich Lemmer, Ulrich Wilhelm Paetzold


  • Hybrid Two‐Step Inkjet‐Printed Perovskite Solar Cells

    by Raphael Pesch, Alexander Diercks, Julian Petry, Alexander Welle, Ronja Pappenberger, Fabian Schackmar, Helge Eggers, Johannes Sutter, Ulrich Lemmer, Ulrich Wilhelm Paetzold

    Perovskite photovoltaics are on their way to commercialization, but crucial advancements are still required to realize scalable and reliable fabrication processes Concerning solution processing of perovskite top solar cells, the hybrid two‐step process offers an auspicious combination of good thin‐film formation control, even on textures, and high power conversion efficiencies (PCEs). Herein, a scalable fabrication process that consists of a hybrid two‐step process and combines evaporated PbI2 with inkjet‐printed organic precursor materials is addressed. It is shown that optimizing the printing parameters enables high PCEs, high reproducibility, and the potential for conformal growth on textured silicon. The perovskite films are free of macroscopic drying effects and omit the use of toxic solvents. To achieve optimal conversion, the morphology of the PbI2 thin film and the selected resolution in the printing process are decisive. To facilitate intermixing and enable stoichiometry, a dimethyl sulfoxide vapor treatment is introduced to increase the PbI2 porosity. Reproducible PCEs are demonstrated with champion devices showing 18.2% which are on par with spin‐coated counterparts. In the results, it is demonstrated that the hybrid two‐step process with an inkjet‐printed second step is a promising scalable process for reliable and high‐quality perovskite deposition even on texture, thereby paving the path toward industrialization.


  • Open Access

    Bandgap Engineering of Two‐Step Processed Perovskite Top Cells for Perovskite‐Based Tandem Photovoltaics

    by Ronja Pappenberger, Alexander Diercks, Julian Petry, Somayeh Moghadamzadeh, Paul Fassl, Ulrich W. Paetzold

    For high‐performance application of perovskite solar cells (PSCs) in monolithic perovskite/silicon tandem configuration, an optimal bandgap and process method of the perovskite top cell is required. While the two‐step method leads to regular perovskite film crystallization, engineering wider bandgaps (Eg > 1.65 eV) for the solution‐based two‐step method remains a challenge. This work introduces an effective and facile strategy to increase the bandgap of two‐step solution‐processed perovskite films by incorporating bromide in both deposition steps, the inorganic precursor deposition (step 1, PbBr2) and the organic precursor deposition (step 2, FABr). This strategy yields improved charge carrier extraction and quasi‐Fermi level splitting with power conversion efficiencies (PCEs) of up to 15.9%. Further improvements are achieved by introducing CsI in the bulk and utilizing LiF as surface passivation, resulting in a stable power output exceeding 18.5% for Eg = 1.68 eV. This additional performance boost arises from enhanced perovskite film crystallization, leading to improved charge carrier extraction. Laboratory scale monolithic perovskite/silicon solar cells (TSCs) (1 cm2 active area) achieve PCEs up to 23.7%. This work marks a significant advancement for wide bandgap two‐step solution‐processed perovskite films, enabling their effective use in high‐performance and reproducible PSCs and perovskite/silicon TSCs.