Chuanzhi Fan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chuanzhi Fan has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Quan Zheng
State Key Laboratory of Robotics and Intelligent Systems, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
7 shared publications - Yi Yang
State Key Laboratory of Robotics and Intelligent Systems, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
7 shared publications - Zhiqiang Hu
State Key Laboratory of Robotics and Intelligent Systems, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
6 shared publications - Qingbo Wei
State Key Laboratory of Robotics and Intelligent Systems, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
5 shared publications - Xingqun Zhou
State Key Laboratory of Robotics and Intelligent Systems, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
5 shared publications - Zhichao Wang
State Key Laboratory of Robotics and Intelligent Systems, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
5 shared publications
Latest Publications
- Open Access
Underwater Relative Pose Estimation and Tracking Between AUVs Based on a Hull-Integrated Laser-Beam Marker
Close-range tracking between autonomous underwater vehicles (AUVs) requires continuous six-degree-of-freedom (6-DoF) relative pose feedback, yet target boards and protruding light arrays are difficult to integrate into compact streamlined hulls. This paper presents a monocular relative pose sensing and tracking system based on a hull-integrated laser-beam marker: four blue beams emitted through hull-flush outlets form four calibrated coplanar intersections. A Hough–strip method recovers the principal beams and their intersections from fragmented, merged, and spurious image responses. To suppress the pose jumps that image-point errors induce through the coplanar ambiguity, the proposed solver refines multiple planar candidates and, in each frame, outputs the candidate consistent with both the current observation and the preceding motion. The system runs onboard in real time. In fixed-pose pool tests over 2–6 m, the lateral and attitude errors were at the centimeter and degree levels, respectively, and the normalized optical-axis root-mean-square error (RMSE) was 2.4–. On dynamic lake data, the proposed solver did not exhibit the large attitude jumps observed for representative perspective-n-point (PnP) solvers and reduced the root mean square of the third-order attitude differences to about of the single-initialization value. In a 214 s nighttime lake trial, of frames yielded valid poses, supporting three-channel closed-loop tracking.Open AccessUnderwater Relative Pose Estimation and Tracking Between AUVs Based on a Hull-Integrated Laser-Beam Marker
Close-range tracking between autonomous underwater vehicles (AUVs) requires continuous six-degree-of-freedom (6-DoF) relative pose feedback, yet target boards and protruding light arrays are difficult to integrate into compact streamlined hulls. This paper presents a monocular relative pose sensing and tracking system based on a hull-integrated laser-beam marker: four blue beams emitted through hull-flush outlets form four calibrated coplanar intersections. A Hough–strip method recovers the principal beams and their intersections from fragmented, merged, and spurious image responses. To suppress the pose jumps that image-point errors induce through the coplanar ambiguity, the proposed solver refines multiple planar candidates and, in each frame, outputs the candidate consistent with both the current observation and the preceding motion. The system runs onboard in real time. In fixed-pose pool tests over 2–6 m, the lateral and attitude errors were at the centimeter and degree levels, respectively, and the normalized optical-axis root-mean-square error (RMSE) was 2.4–. On dynamic lake data, the proposed solver did not exhibit the large attitude jumps observed for representative perspective-n-point (PnP) solvers and reduced the root mean square of the third-order attitude differences to about of the single-initialization value. In a 214 s nighttime lake trial, of frames yielded valid poses, supporting three-channel closed-loop tracking. - 8 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. PP (15523098) , 1-17
Zero-Shot Sim-to-Real 6-DoF Pose Estimation for Underwater Vehicles Based on Uncertainty-Guided Dense Correspondence
Accurate 6-DoF relative pose estimation is essential for multi-AUV cooperative tasks. However, pose-annotated underwater data are difficult to obtain, limiting learning-based methods. We present ZUPose, a monocular pose estimator trained entirely on synthetic data and deployed directly in real underwater scenes. A key challenge is prediction noise introduced by the sim-to-real gap and underwater optical degradation. To address it, we adopt an algorithm-data co-design strategy. At the algorithm level, we develop an uncertainty-guided densecorrespondence framework in which the network jointly predicts dense correspondences and per-pixel uncertainty under a Laplace-based probabilistic formulation. The predicted uncertainty acts as a learned scale parameter to model correspondence noise and guide pose optimization. At the data level, we construct a physics-guided simulation pipeline to model underwater optical degradation and generate diverse synthetic images. In real turbid water, ZUPose achieves translation and rotation errors of 6.7 cm and 7.7$^\circ$, with both reduced by about half compared with the best-performing baseline. The method remains stable under overexposure and long-range observation, and dual-AUV navigation experiments further validate its practical viability.
- 8 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. PP (15523098) , 1-17
Zero-Shot Sim-to-Real 6-DoF Pose Estimation for Underwater Vehicles Based on Uncertainty-Guided Dense Correspondence
Accurate 6-DoF relative pose estimation is essential for multi-AUV cooperative tasks. However, pose-annotated underwater data are difficult to obtain, limiting learning-based methods. We present ZUPose, a monocular pose estimator trained entirely on synthetic data and deployed directly in real underwater scenes. A key challenge is prediction noise introduced by the sim-to-real gap and underwater optical degradation. To address it, we adopt an algorithm-data co-design strategy. At the algorithm level, we develop an uncertainty-guided densecorrespondence framework in which the network jointly predicts dense correspondences and per-pixel uncertainty under a Laplace-based probabilistic formulation. The predicted uncertainty acts as a learned scale parameter to model correspondence noise and guide pose optimization. At the data level, we construct a physics-guided simulation pipeline to model underwater optical degradation and generate diverse synthetic images. In real turbid water, ZUPose achieves translation and rotation errors of 6.7 cm and 7.7$^\circ$, with both reduced by about half compared with the best-performing baseline. The method remains stable under overexposure and long-range observation, and dual-AUV navigation experiments further validate its practical viability.
- Open Access
Robust Underwater Docking Visual Guidance and Positioning Method Based on a Cage-Type Dual-Layer Guiding Light Array
Due to the limited and fixed field of view of the onboard camera, the guiding beacons gradually drift out of sight as the AUV approaches the docking station, resulting in unreliable positioning and intermittent data. This paper proposes an underwater autonomous docking visual localization method based on a cage-type dual-layer guiding light array. To address the gradual loss of beacon visibility during AUV approach, a rationally designed localization scheme employing a cage-type, dual-layer guiding light array is presented. A dual-layer light array localization algorithm is introduced to accommodate varying beacon appearances at different docking stages by dynamically distinguishing between front and rear guiding light arrays. Following layer-wise separation of guiding lights, a robust tag-matching framework is constructed for each layer. Particle swarm optimization (PSO) is employed for high-precision initial tag matching, and a filtering strategy based on distance and angular ratio consistency eliminates unreliable matches. Under extreme conditions with three missing lights or two spurious beacons, the method achieves 90.3% and 99.6% matching success rates, respectively. After applying filtering strategy, error correction using backtracking extended Kalman filter (BTEKF) brings matching success rate to 99.9%. Simulations and underwater experiments demonstrate stable and robust tag matching across all docking phases, with average detection time of 0.112 s, even when handling dual-layer arrays. The proposed method achieves continuous visual guidance-based docking for autonomous AUV recovery.
Open AccessRobust Underwater Docking Visual Guidance and Positioning Method Based on a Cage-Type Dual-Layer Guiding Light Array
Due to the limited and fixed field of view of the onboard camera, the guiding beacons gradually drift out of sight as the AUV approaches the docking station, resulting in unreliable positioning and intermittent data. This paper proposes an underwater autonomous docking visual localization method based on a cage-type dual-layer guiding light array. To address the gradual loss of beacon visibility during AUV approach, a rationally designed localization scheme employing a cage-type, dual-layer guiding light array is presented. A dual-layer light array localization algorithm is introduced to accommodate varying beacon appearances at different docking stages by dynamically distinguishing between front and rear guiding light arrays. Following layer-wise separation of guiding lights, a robust tag-matching framework is constructed for each layer. Particle swarm optimization (PSO) is employed for high-precision initial tag matching, and a filtering strategy based on distance and angular ratio consistency eliminates unreliable matches. Under extreme conditions with three missing lights or two spurious beacons, the method achieves 90.3% and 99.6% matching success rates, respectively. After applying filtering strategy, error correction using backtracking extended Kalman filter (BTEKF) brings matching success rate to 99.9%. Simulations and underwater experiments demonstrate stable and robust tag matching across all docking phases, with average detection time of 0.112 s, even when handling dual-layer arrays. The proposed method achieves continuous visual guidance-based docking for autonomous AUV recovery.
- Open Access
- 22 August 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (9) , 1604
Design and Optimization of a Connecting Joint for Underwater Autonomous Docking and Separation
In this paper, a connecting joint capable of underwater autonomous docking and separation is proposed, which can be used for a reconfigurable articulated underwater robot (RAU robot). The structural design, optimization, and experimental validation of the connecting joint are presented in detail. First, the concept of the RAU robot is introduced, along with its different operational modes and the application scenarios. Second, the specific structural design and basic functions of the connecting joint are described. Third, a dynamic model of the docking process between different vehicles is established and simulated by kinematic simulation software. Through discretely sampling the parameter space, the optimal parameter combination is obtained. Finally, a prototype of the connecting joint is fabricated and functional tests are conducted. The impact forces on the docking rods before and after optimization are compared. The results show that the designed connecting joint can fulfill the functional requirements for autonomous docking of the underwater robot, and the maximum impact force is reduced by 27.08% compared to the one before optimization.
- 22 August 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (9) , 1604
Open AccessDesign and Optimization of a Connecting Joint for Underwater Autonomous Docking and Separation
In this paper, a connecting joint capable of underwater autonomous docking and separation is proposed, which can be used for a reconfigurable articulated underwater robot (RAU robot). The structural design, optimization, and experimental validation of the connecting joint are presented in detail. First, the concept of the RAU robot is introduced, along with its different operational modes and the application scenarios. Second, the specific structural design and basic functions of the connecting joint are described. Third, a dynamic model of the docking process between different vehicles is established and simulated by kinematic simulation software. Through discretely sampling the parameter space, the optimal parameter combination is obtained. Finally, a prototype of the connecting joint is fabricated and functional tests are conducted. The impact forces on the docking rods before and after optimization are compared. The results show that the designed connecting joint can fulfill the functional requirements for autonomous docking of the underwater robot, and the maximum impact force is reduced by 27.08% compared to the one before optimization.
- Open Access
- 1 November 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 1960
Multiparameter Collaborative Optimization and Analysis of the Non-Penetrating Tunnel Thruster
A brand new non-penetrating tunnel thruster (short for NPT thruster) is proposed in this paper. The tunnel structural parameters of the thruster are optimized, and the performance and optimization effect are verified by experiments. First, the design and function of the NPT thruster are introduced. Second, the computational fluid dynamics method is used to calculate the hydrodynamic performance of the NPT thruster and to analyze the static mooring thrust performance. Third, the tunnel structural parameters of the NPT thruster are optimized with the method of the response surface methodology. The pressure distributions and the flow fields on the tunnel surface of the NPT thrusters before and after optimization are compared with simulations. Finally, the mooring static thrust of the NPT thrusters is tested with experiments. The results show that the average increase in the mooring static thrust for the optimized thruster is 12.4%, and the maximum increase can reach 21.79% when the rotational speed is from 3000 rpm to 6500 rpm.
- 1 November 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 1960
Open AccessMultiparameter Collaborative Optimization and Analysis of the Non-Penetrating Tunnel Thruster
A brand new non-penetrating tunnel thruster (short for NPT thruster) is proposed in this paper. The tunnel structural parameters of the thruster are optimized, and the performance and optimization effect are verified by experiments. First, the design and function of the NPT thruster are introduced. Second, the computational fluid dynamics method is used to calculate the hydrodynamic performance of the NPT thruster and to analyze the static mooring thrust performance. Third, the tunnel structural parameters of the NPT thruster are optimized with the method of the response surface methodology. The pressure distributions and the flow fields on the tunnel surface of the NPT thrusters before and after optimization are compared with simulations. Finally, the mooring static thrust of the NPT thrusters is tested with experiments. The results show that the average increase in the mooring static thrust for the optimized thruster is 12.4%, and the maximum increase can reach 21.79% when the rotational speed is from 3000 rpm to 6500 rpm.
- Open Access
Enhancing Inter-AUV Perception: Adaptive 6-DOF Pose Estimation with Synthetic Images for AUV Swarm Sensing
The capabilities of AUV mutual perception and localization are crucial for the development of AUV swarm systems. We propose the AUV6D model, a synthetic image-based approach to enhance inter-AUV perception through 6D pose estimation. Due to the challenge of acquiring accurate 6D pose data, a dataset of simulated underwater images with precise pose labels was generated using Unity3D. Mask-CycleGAN technology was introduced to transform these simulated images into realistic synthetic images, addressing the scarcity of available underwater data. Furthermore, the Color Intermediate Domain Mapping strategy is proposed to ensure alignment across different image styles at pixel and feature levels, enhancing the adaptability of the pose estimation model. Additionally, the Salient Keypoint Vector Voting Mechanism was developed to improve the accuracy and robustness of underwater pose estimation, enabling precise localization even in the presence of occlusions. The experimental results demonstrated that our AUV6D model achieved millimeter-level localization precision and pose estimation errors within five degrees, showing exceptional performance in complex underwater environments. Navigation experiments with two AUVs further verified the model’s reliability for mutual 6D pose estimation. This research provides substantial technical support for more complex and precise collaborative operations for AUV swarms in the future.
Open AccessEnhancing Inter-AUV Perception: Adaptive 6-DOF Pose Estimation with Synthetic Images for AUV Swarm Sensing
The capabilities of AUV mutual perception and localization are crucial for the development of AUV swarm systems. We propose the AUV6D model, a synthetic image-based approach to enhance inter-AUV perception through 6D pose estimation. Due to the challenge of acquiring accurate 6D pose data, a dataset of simulated underwater images with precise pose labels was generated using Unity3D. Mask-CycleGAN technology was introduced to transform these simulated images into realistic synthetic images, addressing the scarcity of available underwater data. Furthermore, the Color Intermediate Domain Mapping strategy is proposed to ensure alignment across different image styles at pixel and feature levels, enhancing the adaptability of the pose estimation model. Additionally, the Salient Keypoint Vector Voting Mechanism was developed to improve the accuracy and robustness of underwater pose estimation, enabling precise localization even in the presence of occlusions. The experimental results demonstrated that our AUV6D model achieved millimeter-level localization precision and pose estimation errors within five degrees, showing exceptional performance in complex underwater environments. Navigation experiments with two AUVs further verified the model’s reliability for mutual 6D pose estimation. This research provides substantial technical support for more complex and precise collaborative operations for AUV swarms in the future.
- Open Access
- 4 December 2023
- Published by MDPI AG in Electronics
- Vol. 12 (23) , 4882
Localization Method for Underwater Robot Swarms Based on Enhanced Visual Markers
In challenging tasks such as large-scale resource detection, deep-sea exploration, prolonged cruising, extensive topographical mapping, and operations within intricate current regions, AUV swarm technologies play a pivotal role. A core technical challenge within this realm is the precise determination of relative positions among AUVs within the cluster. Given the complexity of underwater environments, this study introduces an integrated and high-precision underwater cluster positioning method, incorporating advanced image restoration algorithms and enhanced underwater visual markers. Utilizing the Hydro-Optical Image Restoration Model (HOIRM) developed in this research, image clarity in underwater settings is significantly improved, thereby expanding the attenuation coefficient range for marker identification and enhancing it by at least 20%. Compared to other markers, the novel underwater visual marker designed in this research elevates positioning accuracy by 1.5 times under optimal water conditions and twice as much under adverse conditions. By synthesizing the aforementioned techniques, this study has successfully developed a comprehensive underwater visual positioning algorithm, amalgamating image restoration, feature detection, geometric code value analysis, and pose resolution. The efficacy of the method has been validated through real-world underwater swarm experiments, providing crucial navigational and operational assurance for AUV clusters.
- 4 December 2023
- Published by MDPI AG in Electronics
- Vol. 12 (23) , 4882
Open AccessLocalization Method for Underwater Robot Swarms Based on Enhanced Visual Markers
In challenging tasks such as large-scale resource detection, deep-sea exploration, prolonged cruising, extensive topographical mapping, and operations within intricate current regions, AUV swarm technologies play a pivotal role. A core technical challenge within this realm is the precise determination of relative positions among AUVs within the cluster. Given the complexity of underwater environments, this study introduces an integrated and high-precision underwater cluster positioning method, incorporating advanced image restoration algorithms and enhanced underwater visual markers. Utilizing the Hydro-Optical Image Restoration Model (HOIRM) developed in this research, image clarity in underwater settings is significantly improved, thereby expanding the attenuation coefficient range for marker identification and enhancing it by at least 20%. Compared to other markers, the novel underwater visual marker designed in this research elevates positioning accuracy by 1.5 times under optimal water conditions and twice as much under adverse conditions. By synthesizing the aforementioned techniques, this study has successfully developed a comprehensive underwater visual positioning algorithm, amalgamating image restoration, feature detection, geometric code value analysis, and pose resolution. The efficacy of the method has been validated through real-world underwater swarm experiments, providing crucial navigational and operational assurance for AUV clusters.