BZBinshan Zhao

Binshan Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Binshan Zhao has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Threaded Dielectric Resonator Antenna With Flexible Assembly and Wideband Frequency Reconfigurability

    by Hui Xue, Min Tang, Binshan Zhao, Weihong Zhang, Yue-Ping Zhang

    In this letter, a new design of threaded dielectric resonator antenna (TDRA) with thread-engaged dielectric resonator (DR) integration is presented. The assembly strategy facilitates flexible assembly and benefits wideband frequency reconfigurability of the TDRA, while avoiding the alignment problem successfully. Aided by tools such as screwdrivers, the position of the DR within the substrate can be precisely adjusted. The analytical expression for the resonant frequency of the TDRA is provided. Taking advantage of the mechanical tuning scheme, the proposed design achieves a frequency tuning range of 31.6% (3.74 to 5.13 GHz), with radiation efficiency of more than 88%.

  • Electrical and Thermal Design of Millimeter-Wave High-Gain Heatsink Antenna Array

    by Binshan Zhao, Min Tang, Yue-Ping Zhang

    Heatsink antennas perform dual functions of both radiation and heat dissipation. Thus, their electrical and thermal performance should be considered carefully in a codesign procedure, especially in the high-frequency range. In this paper, the electrical and thermal design of a millimeter-wave high-gain heatsink antenna array is presented. The radiation is generated by the laminated resonator antenna (LRA) in the low temperature co-fired ceramic (LTCC) substrate, and then enhanced by the specially designed heatsink structure. To facilitate the independent control of electromagnetic and thermal performance, the vertical structure of the heatsink element is divided into two parts: the upper fins are utilized to enlarge the effective radiation area and thus improve the gain, while the lower fins are designed to satisfy the heat dissipation demand, which has a negligible impact on the radiation performance. The element gain achieves 11.5 dBi at 60 GHz by loading the proposed heatsink structure, and the element spacing reaches 1.25 λ0 (λ0 is the wavelength in free space at 60 GHz) for a 4×4 heatsink antenna array. In measurement, the peak gain and aperture efficiency are 21 dBi and 48.6% at 61.1 GHz, respectively. The impedance bandwidth is 19.1%, from 56.3 GHz to 68.2 GHz. A heatsink antenna array prototype with multiple chips is fabricated to demonstrate its thermal performance. The overall thermal resistance is reduced by about 38% with the proposed design. Under the forced-air cooling condition, the hotspot temperature is lower than 85 ℃, with an input power of 2.5 W.


  • Radiation Characteristics of a Slot Antenna With Two Parasitically Excited Wires

    by Junming Ding, Min Tang, Binshan Zhao, Yueping Zhang

    The formulation and validation of the radiation characteristics of a slot antenna with two parasitically excited wires (SCPW) is presented in this letter. First, the coupled currents at driving point of wires are derived. Then, the far-fields of a slot antenna and two wires excited with same amplitude but out of phase are derived under the commonly-assumed electrically-thin condition for the slot and wires, respectively. The antenna's overall radiation field is then obtained by combining these components and the directivity is deduced. Next, the amplitude and the phase of the far-field of the wires are calculated and analyzed to obtain a cancelation to the far-field of the slot antenna. Finally, the slot antenna coupled with two parasitically excited monopoles (SCPM) achieves uniform radiation patterns in both E- and H-planes. Slot antenna coupled with two parasitically excited inverted-Ls (SCPI) broadens the radiation pattern in both principal planes, resulting in a half-power beamwidth (HPBW) of 90$^{\circ }$ in the H-plane and 88$^{\circ }$ in the E-plane. Furthermore, the interelement mutual coupling in the E-plane achieved the around 6 dB reduction for SCPW elements compared to using a slot alone. For verification, the prototypes of SCPM, SCPI, and their 1x2 arrays were simulated, fabricated, and measured. Acceptable agreements among the calculated, simulated and measured results are achieved.

  • Wideband Circularly Polarized Active Heatsink Antenna Array

    by Binshan Zhao, Min Tang, Shunxiang Lan, Qihao Xu, Yue-Ping Zhang, Junfa Mao

    A wideband active circularly polarized (CP) heatsink antenna array is designed in this paper. It consists of a 3-D printing metal structure and a low-temperature cofired ceramic (LTCC) substrate. The metal structure is a 4×4 waveguide array, serving dual purposes as both a heatsink and an electromagnetic radiator. The substrate is placed under the metallic array, with a feeding network layer inside and a chip circuit layer on the surface. To generate CP radiation wave, the antipodal linearly tapered slot antenna (ALTSA) is used as the heatsink element, which is fed by the stripline in the substrate. Two ridges and a back cavity are designed in each element to realize the wideband energy conversion from the guided wave in the stripline to the rectangular waveguide. A prototype of the heatsink antenna array without chip is fabricated and the electromagnetic performance is tested. The measured results demonstrated that the proposed antenna array obtains an impedance bandwidth (|S11| < –10 dB) of 50%, an axial ratio (AR) bandwidth (AR < 3 dB) of 33.6%, respectively. The peak gain is 19 dBi at 34.7 GHz. Further, an active antenna array, with a power amplifier (PA) integrated on the bottom of the substrate is also measured, which can achieve an effective peak gain of 39.7 dBi. The measured thermal performance reveals that a significant temperature drop of 80 °C is achieved by loading the metal heatsink on the LTCC package, ensuring the normal operation of the PA.


  • A Broadband D-Band Cavity-Backed Coupled-Feed Patch Antenna in Wafer-Level Package Based on Heterogeneous Integrations

    by Xiaocheng Wang, Gaobiao Xiao, Binshan Zhao, Yinshan Huang, Qihao Xu

    This paper proposes a broadband cavity-backed coupled-feed patch antenna in wafer-level package for D-band wireless communications. In the Si-wafer, a metal cavity is etched right below the patch antenna to increase the thickness of the substrate under the patch. Through the heterogeneous integration technique, the cavity is filled with Rogers 5880 substrate with a thickness of 274 μm. A 20-μm-thick benzocyclobutene (BCB) thin-film is served as the interconnection layer on the Si-wafer, enabling low-loss interconnection with RFICs through vias and transmission lines. The antenna placed on the BCB layer is excited by coupled-feed method, which can improve the design flexibility and further increase the bandwidth. The electric field distributions are used to analyze the antenna working principle, and an equivalent circuit model is developed based on it for analyzing the factors that affect impedance matching. The single antenna element and its array both feature broadband performance with stable gain and high efficiency. The antenna array is differentially excited by a balun to avoid beam deviation and to suppress cross polarization.


  • Wideband Decoupling of Zero Edge Spacing Laminated Resonator Antenna Array

    by Binshan Zhao, Min Tang, Yue-Ping Zhang, Junfa Mao

    A simple wideband decoupling method for the laminated resonator antenna (LRA) array is proposed in this article. For compactness, the LRA elements are placed right next to each other with zero edge spacing, sharing the same middle via fence on one side. To neutralize the strong space coupling existed between the antenna elements, the extra cavity coupling is introduced by disconnecting the middle via fence with the upper ground. With appropriate dimension of the middle via fence, the electric field coupled through the cavity path is approximately equal in magnitude to that coupled through the space path, but with opposite direction. Therefore, the isolation between LRA elements is enhanced substantially. By utilizing different shapes of middle via fence, the coupling in both the E- and H-plane placed LRA arrays is reduced significantly. The entire antenna system is very compact and simple without using additional structure. For verification, the decoupling 1×2 LRA arrays are fabricated and measured. Wide overlapping bandwidths (S 11 < –10 dB and S 21 < –25 dB) in both E- (16%) and H-planes (12%) are achieved. Moreover, the effectiveness of the decoupling method is also successfully validated in the 1×4 LRA arrays, showing its potential in multiple-input-multiple-output (MIMO) systems.


  • Miniaturized Laminated Resonator Antenna Array Loaded With Periodic Irises in LTCC

    by Binshan Zhao, Min Tang, Xiaocheng Wang, Meini Wang, Yue-Ping Zhang, Junfa Mao

    A miniaturized laminated resonator antenna (LRA) array with periodic irises is proposed in this paper. By means of the distinguished slow-wave property of the periodic iris-loaded waveguide (IWG), a compact LRA element with a dimension of only 0.36 λ 0 × 0.26 λ 0 × 0.08 λ 0 is designed, where λ 0 is the wavelength in the free space at 60 GHz. The small transverse size makes it possible to construct an antenna array with the element spacing of less than 0.5 λ 0 , which is rather beneficial to the scanning arrays and multiple-input multiple-output (MIMO) systems. For demonstration, a series-fed 1×6 antenna array in E-plane with the element spacing of 0.38 λ 0 is designed and fabricated with the low temperature co-fired ceramic (LTCC) process. The measured relative impedance bandwidth is 9.2 % (from 56.3 GHz to 61.8 GHz). The measured peak gain and 3-dB gain bandwidth are 10.6 dBi and 5.3 GHz, respectively. Furthermore, the scanning arrays are fabricated to demonstrate the scanning performance, with an element spacing of 0.45 λ 0 in H-plane. They support a measured maximum scanning angle of 43° while the gain drop is within 2.5 dB.


  • An Orthogonally Polarized Shared-Aperture Antenna Based on Structure Reuse of Metasurface

    by Xiaocheng Wang, Gaobiao Xiao, Hao Cheng, Binshan Zhao

    This letter proposes an orthogonally polarized dual-band shared-aperture antenna (SAA) based on the concept of structure reuse of metasurface (MTS). The designed MTS has two layers. At lower band, the MTS is excited by a 2×2 slot array to suppress the unwanted modes and stabilize the antenna pattern. At higher-band, the MTS is reused. Each cell of the MTS is considered as a stacked patch antenna and connected in series to form a 4×8 series-fed antenna array. The array is differentially fed through a balun to avoid tilting of the main beam. Since the polarization direction of the array is orthogonal to the MTS-based antenna, the isolation is improved. The proposed SAA has a very high aperture reuse efficiency through reusing the whole structure of MTS. In addition, the planar structure is compact and suitable for integration. As an example, we designed a SAA working at about 30 GHz and 60 GHz to verify this concept.


  • Design of Broadband Compact Grid Array Antennas Using Gradient Slow-Wave Structures

    by Binshan Zhao, Min Tang, Zijian Shao, Yueping Zhang, Junfa Mao

    Compact grid array antennas (GAAs) with the gradient slow-wave structures are designed in this letter. The electrical lengths of slow-wave transmission lines (SW-TLs) with gradient structures are investigated based on the equivalent microwave network. By utilizing SW-TLs with exponential gradient structure on the long sides of GAAs, the proposed antenna achieves an area-reduction factor of 24.4%, with a measured 10-dB impedance bandwidth from 27.50 GHz to 33.86 GHz and a maximum gain of 15.71 dBi.