Tongfei Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tongfei Shi has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
Min Liu
Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China
6 shared publicationsDaopeng Li
Key Laboratory of Materials Physics, Centre for Environmental and Energy Nanomaterials, Anhui Key Laboratory of Nanomaterials and Nanotechnology, CAS Center for Excellence in Nanoscience Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China
5 shared publicationsDongnan Zhao
Key Laboratory of Materials Physics, Centre for Environmental and Energy Nanomaterials, Anhui Key Laboratory of Nanomaterials and Nanotechnology, CAS Center for Excellence in Nanoscience Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China
5 shared publications- Shengbo Zhang
Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China
5 shared publications - Haimin Zhang
University of Science and Technology of China
4 shared publications Zhixian Mao
Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China
4 shared publications
Latest Publications
- 14 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (11) , 3555-3559
Interface engineering in a Cu–CoO heterostructure for high-efficiency electrocatalytic nitrate reduction to ammonia
We have successfully synthesized a Cu–CoO@CNT heterostructure catalyst for the electrocatalytic reduction of nitrate to produce ammonia.
- 14 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (11) , 3555-3559
Interface engineering in a Cu–CoO heterostructure for high-efficiency electrocatalytic nitrate reduction to ammonia
We have successfully synthesized a Cu–CoO@CNT heterostructure catalyst for the electrocatalytic reduction of nitrate to produce ammonia.
- Open Access
- 6 May 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (19) , 14739-14744
Au nanoparticles with oxygen vacancies on BiVO4 for electrocatalytic nitrate reduction to ammonia
It is demonstrated that by using Au nanoparticles embedded on BiVO4 with oxygen vacancies, the electrocatalytic NitRR is indeed possible under ambient conditions.
- 6 May 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (19) , 14739-14744
Open AccessAu nanoparticles with oxygen vacancies on BiVO4 for electrocatalytic nitrate reduction to ammonia
It is demonstrated that by using Au nanoparticles embedded on BiVO4 with oxygen vacancies, the electrocatalytic NitRR is indeed possible under ambient conditions.
- Open Access
- 28 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (13) , 10390-10394
Ni–Co bimetallic phosphide catalyst toward electrocatalytic ammonia synthesis under ambient conditions
Electrocatalytic nitrate reduction reaction (NitRR) under ambient conditions is a promising sustainable and eco-friendly method for ammonia (NH3) synthesis, which currently highly relies on the energy-consuming Haber–Bosch process with enormous CO2 emissions. In this work, we report the synthesis of a Ni–Co bimetallic phosphide catalyst (NiCoP) using the traditional hydrothermal combined high-temperature phosphorization method. Compared with monometallic phosphides such as Ni2P and CoP, the as-synthesized NiCoP catalyst with synergistic effects exhibits remarkable NitRR performance with the highest faradaic efficiency (FE) of 91.3 ± 4.4% at −1.2 V (vs. RHE) with the maximum NH3 yield rate of 5553.4 ± 400.8 μg h−1 cm−2 at −1.4 V (vs. RHE). Further in situ different electrochemical mass spectrometry (DEMS) analysis is employed to identify the intermediate produced during the electrocatalytic NitRR process, confirming NiCoP as a promising electrocatalyst for NH3 synthesis.
- 28 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (13) , 10390-10394
Open AccessNi–Co bimetallic phosphide catalyst toward electrocatalytic ammonia synthesis under ambient conditions
Electrocatalytic nitrate reduction reaction (NitRR) under ambient conditions is a promising sustainable and eco-friendly method for ammonia (NH3) synthesis, which currently highly relies on the energy-consuming Haber–Bosch process with enormous CO2 emissions. In this work, we report the synthesis of a Ni–Co bimetallic phosphide catalyst (NiCoP) using the traditional hydrothermal combined high-temperature phosphorization method. Compared with monometallic phosphides such as Ni2P and CoP, the as-synthesized NiCoP catalyst with synergistic effects exhibits remarkable NitRR performance with the highest faradaic efficiency (FE) of 91.3 ± 4.4% at −1.2 V (vs. RHE) with the maximum NH3 yield rate of 5553.4 ± 400.8 μg h−1 cm−2 at −1.4 V (vs. RHE). Further in situ different electrochemical mass spectrometry (DEMS) analysis is employed to identify the intermediate produced during the electrocatalytic NitRR process, confirming NiCoP as a promising electrocatalyst for NH3 synthesis.
- Open Access
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (12) , 9461-9466
Highly selective electrocatalytic reduction of nitrate to ammonia over a copper–cobalt bimetallic catalyst
The electrocatalytic nitrate reduction reaction (NitRR) is a promising alternative to the traditional Haber–Bosch process. However, the competitive hydrogen evolution reaction results in poor NH3 selectivity (SNH3). Here, a Cu–Co bimetallic catalyst supported on biomass-derived porous carbon (Cu–Co/BPC) is designed and synthesized. Interestingly, the catalyst presents a high NH3 yield rate of 9114.1 ± 244.8 μg h−1 cm−2 at −1.4 V (vs. RHE) and a high faradaic efficiency (FE) of 84.5 ± 1.6% at −1.0 V (vs. RHE). Notably, the S NH3 of Cu–Co/BPC catalyst is kept above 94.2% under a broad range from −1.0 to −1.4 V (vs. RHE), indicating the high NitRR-to-NH3 selectivity of Cu–Co/BPC. The combination of in situ characterization and experimental results indicates that the electron transfer occurs between Cu and Co, and many active sites are generated for adsorption and activation of NO double bonds, and hydrogenation reactions occur with adjacent H protons to improve the selectivity of NH3.
- 21 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (12) , 9461-9466
Open AccessHighly selective electrocatalytic reduction of nitrate to ammonia over a copper–cobalt bimetallic catalyst
The electrocatalytic nitrate reduction reaction (NitRR) is a promising alternative to the traditional Haber–Bosch process. However, the competitive hydrogen evolution reaction results in poor NH3 selectivity (SNH3). Here, a Cu–Co bimetallic catalyst supported on biomass-derived porous carbon (Cu–Co/BPC) is designed and synthesized. Interestingly, the catalyst presents a high NH3 yield rate of 9114.1 ± 244.8 μg h−1 cm−2 at −1.4 V (vs. RHE) and a high faradaic efficiency (FE) of 84.5 ± 1.6% at −1.0 V (vs. RHE). Notably, the S NH3 of Cu–Co/BPC catalyst is kept above 94.2% under a broad range from −1.0 to −1.4 V (vs. RHE), indicating the high NitRR-to-NH3 selectivity of Cu–Co/BPC. The combination of in situ characterization and experimental results indicates that the electron transfer occurs between Cu and Co, and many active sites are generated for adsorption and activation of NO double bonds, and hydrogenation reactions occur with adjacent H protons to improve the selectivity of NH3.
- 1 January 2025
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 74 (14) , 148502
Compositional design of spectrally stable blue mixed-halide perovskite LEDs
钙钛矿材料因其可调带隙和高荧光效率成为发光二极管(LED)的研究热点,但混合卤素(Br-/Cl-)体系的相分离问题严重制约蓝光LED的稳定性。本文提出通过调控前驱体中铯铅含量比,形成CsPb (Br1-xClx)3/Cs4Pb (Br1-xClx)6复合相结构。结果表明Cs4Pb (Br1-xClx)6相的纳米晶颗粒聚集并包复在CsPb (Br1-xClx)3大晶粒周围,物理上阻隔了卤素离子的迁移,避免了相分离的产生。宽带隙的Cs4Pb (Br1-xClx)6还引入了量子限域效应,钝化表面缺陷态,提升CsPb (Br1-xClx)3材料光电性能。优化后的器件在50 mA/cm2电流密度下光谱稳定性显著提升。该研究为高稳定性蓝光钙钛矿LED提供了新思路。
- 1 January 2025
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 74 (14) , 148502
Compositional design of spectrally stable blue mixed-halide perovskite LEDs
钙钛矿材料因其可调带隙和高荧光效率成为发光二极管(LED)的研究热点,但混合卤素(Br-/Cl-)体系的相分离问题严重制约蓝光LED的稳定性。本文提出通过调控前驱体中铯铅含量比,形成CsPb (Br1-xClx)3/Cs4Pb (Br1-xClx)6复合相结构。结果表明Cs4Pb (Br1-xClx)6相的纳米晶颗粒聚集并包复在CsPb (Br1-xClx)3大晶粒周围,物理上阻隔了卤素离子的迁移,避免了相分离的产生。宽带隙的Cs4Pb (Br1-xClx)6还引入了量子限域效应,钝化表面缺陷态,提升CsPb (Br1-xClx)3材料光电性能。优化后的器件在50 mA/cm2电流密度下光谱稳定性显著提升。该研究为高稳定性蓝光钙钛矿LED提供了新思路。
- Open Access
- 27 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (22)
Strain regulated giant negative thermal expansion in hexagonal sulfides (Ni1−xFex)1− δ S
Strain engineering is an alternative to chemical modification in manipulating functionalities of materials. Here, we report the lattice strain could relax the abrupt phase transition of (Ni1−xFex)1−δS and lead to an excellent negative thermal expansion (NTE) effect. The high-resolution scanning transmission electron microscope and extended x-ray absorption fine structure unambiguously demonstrate that parallel Ni3S4-type nanosheets could be introduced into the matrix lattice by increasing the δ value. By forming the Ni(Fe)-S-Ni(Fe) bonds, the (1–11) plane of nanosheets epitaxially grows on the (002) plane of the hexagonal matrix. Those bonds are strong enough to bear the large lattice mismatch along the interface as the phase transition occurs. As the concentration of nanosheets increases, the weak and inhomogeneous strain in matrix lattice becomes strong and uniform, expanding the NTE window in different ways. This result opens an unconventional avenue for designing NTE materials and extends the research scope of lattice strain as well.
- 27 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (22)
Open AccessStrain regulated giant negative thermal expansion in hexagonal sulfides (Ni1−xFex)1− δ S
Strain engineering is an alternative to chemical modification in manipulating functionalities of materials. Here, we report the lattice strain could relax the abrupt phase transition of (Ni1−xFex)1−δS and lead to an excellent negative thermal expansion (NTE) effect. The high-resolution scanning transmission electron microscope and extended x-ray absorption fine structure unambiguously demonstrate that parallel Ni3S4-type nanosheets could be introduced into the matrix lattice by increasing the δ value. By forming the Ni(Fe)-S-Ni(Fe) bonds, the (1–11) plane of nanosheets epitaxially grows on the (002) plane of the hexagonal matrix. Those bonds are strong enough to bear the large lattice mismatch along the interface as the phase transition occurs. As the concentration of nanosheets increases, the weak and inhomogeneous strain in matrix lattice becomes strong and uniform, expanding the NTE window in different ways. This result opens an unconventional avenue for designing NTE materials and extends the research scope of lattice strain as well.
- 25 January 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (5) , 1950-1960
An oxygen-coordinated cobalt single-atom electrocatalyst boosting urea and urea peroxide production
An oxygen-coordinated cobalt single-atom catalyst was successfully fabricated, exhibiting exceptional electrocatalytic activity toward urea and H2O2 production. Subsequently, the value-added urea peroxide was efficiently synthesized.
- 25 January 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (5) , 1950-1960
An oxygen-coordinated cobalt single-atom electrocatalyst boosting urea and urea peroxide production
An oxygen-coordinated cobalt single-atom catalyst was successfully fabricated, exhibiting exceptional electrocatalytic activity toward urea and H2O2 production. Subsequently, the value-added urea peroxide was efficiently synthesized.
- Open Access
- 6 November 2023
- Published by Springer Nature in Nano-Micro Letters
- Vol. 16 (1) , 1-13
Oxygen-Coordinated Single Mn Sites for Efficient Electrocatalytic Nitrate Reduction to Ammonia
Electrocatalytic nitrate reduction reaction has attracted increasing attention due to its goal of low carbon emission and environmental protection. Here, we report an efficient NitRR catalyst composed of single Mn sites with atomically dispersed oxygen (O) coordination on bacterial cellulose-converted graphitic carbon (Mn–O–C). Evidence of the atomically dispersed Mn–(O–C2)4 moieties embedding in the exposed basal plane of carbon surface is confirmed by X-ray absorption spectroscopy. As a result, the as-synthesized Mn–O–C catalyst exhibits superior NitRR activity with an NH3 yield rate (RNH3) of 1476.9 ± 62.6 μg h−1 cm−2 at − 0.7 V (vs. reversible hydrogen electrode, RHE) and a faradaic efficiency (FE) of 89.0 ± 3.8% at − 0.5 V (vs. RHE) under ambient conditions. Further, when evaluated with a practical flow cell, Mn–O–C shows a high RNH3 of 3706.7 ± 552.0 μg h−1 cm−2 at a current density of 100 mA cm−2, 2.5 times of that in the H cell. The in situ FT-IR and Raman spectroscopic studies combined with theoretical calculations indicate that the Mn–(O–C2)4 sites not only effectively inhibit the competitive hydrogen evolution reaction, but also greatly promote the adsorption and activation of nitrate (NO3−), thus boosting both the FE and selectivity of NH3 over Mn–(O–C2)4 sites.
- 6 November 2023
- Published by Springer Nature in Nano-Micro Letters
- Vol. 16 (1) , 1-13
Open AccessOxygen-Coordinated Single Mn Sites for Efficient Electrocatalytic Nitrate Reduction to Ammonia
Electrocatalytic nitrate reduction reaction has attracted increasing attention due to its goal of low carbon emission and environmental protection. Here, we report an efficient NitRR catalyst composed of single Mn sites with atomically dispersed oxygen (O) coordination on bacterial cellulose-converted graphitic carbon (Mn–O–C). Evidence of the atomically dispersed Mn–(O–C2)4 moieties embedding in the exposed basal plane of carbon surface is confirmed by X-ray absorption spectroscopy. As a result, the as-synthesized Mn–O–C catalyst exhibits superior NitRR activity with an NH3 yield rate (RNH3) of 1476.9 ± 62.6 μg h−1 cm−2 at − 0.7 V (vs. reversible hydrogen electrode, RHE) and a faradaic efficiency (FE) of 89.0 ± 3.8% at − 0.5 V (vs. RHE) under ambient conditions. Further, when evaluated with a practical flow cell, Mn–O–C shows a high RNH3 of 3706.7 ± 552.0 μg h−1 cm−2 at a current density of 100 mA cm−2, 2.5 times of that in the H cell. The in situ FT-IR and Raman spectroscopic studies combined with theoretical calculations indicate that the Mn–(O–C2)4 sites not only effectively inhibit the competitive hydrogen evolution reaction, but also greatly promote the adsorption and activation of nitrate (NO3−), thus boosting both the FE and selectivity of NH3 over Mn–(O–C2)4 sites.
- Open Access
- 27 March 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (15) , 9839-9844
Electrochemical ammonia synthesis by reduction of nitrate on Au doped Cu nanowires
Electrochemical nitrate reduction reaction (NO3−RR) to synthesize valuable ammonia (NH3) is considered as a green and appealing alternative to enable an artificial nitrogen cycle.
- 27 March 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (15) , 9839-9844
Open AccessElectrochemical ammonia synthesis by reduction of nitrate on Au doped Cu nanowires
Electrochemical nitrate reduction reaction (NO3−RR) to synthesize valuable ammonia (NH3) is considered as a green and appealing alternative to enable an artificial nitrogen cycle.
- 2 April 2022
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 9 (10) , 2374-2378
Ambient ammonia production via electrocatalytic nitrate reduction catalyzed by a flower-like CuCo 2 O 4 electrocatalyst
The flower-shaped CuCo 2 O 4 spinel catalyst was used for electrochemical nitrate reduction in an electrolyte. Theoretical calculation shows that NO 3 − can be adsorbed on CuCo 2 O 4 to form the *NOH intermediate, so as to obtain a good yield rate and FE.
- 2 April 2022
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 9 (10) , 2374-2378
Ambient ammonia production via electrocatalytic nitrate reduction catalyzed by a flower-like CuCo 2 O 4 electrocatalyst
The flower-shaped CuCo 2 O 4 spinel catalyst was used for electrochemical nitrate reduction in an electrolyte. Theoretical calculation shows that NO 3 − can be adsorbed on CuCo 2 O 4 to form the *NOH intermediate, so as to obtain a good yield rate and FE.