JAJohn Busayo Adeoye

John Busayo Adeoye

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


John Busayo Adeoye has a total of 30 co-authors. Here are the top co-authors by number of shared publications:

  • Sie Yon Lau

    Department of Chemical and Energy Engineering, Faculty of Engineering and Science, Curtin University Malaysia, Miri, Malaysia

    4 shared publications
  • Tung Chiong

    Department of Chemical and Energy Engineering, Faculty of Engineering and Science, Curtin University Malaysia, Miri, Malaysia

    4 shared publications
  • Yee Yong Tan

    Department of Civil and Construction Engineering, Faculty of Engineering and Science, Curtin University Malaysia, Miri, Malaysia

    4 shared publications
  • Yie Hua Tan

    Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Brunei, Gadong, Brunei Darussalam

    4 shared publications
  • Jeffrey Tze Wei Ng

    Enforture Sdn Bhd, Semenyih, Malaysia

    3 shared publications
  • Mohammad Khalid

    James Watt School of Engineering, University of Glasgow, G12 8QQ Glasgow, UK

    3 shared publications

Latest Publications

  • Open Access

    Rapid adsorptive and optimization of batch process for removal of methylene blue using hybrid GA@SnO2-AC composite materials

    by John Busayo Adeoye, Sie Yon Lau, Yie Hua Tan, Yee Yong Tan, Tung Chiong, Nabisab Mujawar Mubarak, Mohammad Khalid, Jeffrey Tze Wei Ng

    Methylene blue poses different health risks to humans and harms the environment. The current research developed a hybrid adsorbent combining gallic acid and tin oxide, with the addition of activated carbon, to mitigate the detrimental impact of methylene blue effluent pollution. The adsorptive characteristics of GA@SnO 2 -AC were validated using the point of zero charge, SEM-EDX, FTIR, and TGA. The variables that determine dye adsorption were examined. The highest adsorption capacity of 95.24 mg/g was achieved. The experiment data matched with Langmuir model and PSO, indicating the applicability of the MB dye uptake. The R L values range from 0.6880 to 0.7280, suggesting a favourable process. Thermodynamic investigation showed negative values for ΔH o (-23.1196) and ΔS o (-0.0442), indicating an exothermic adsorption system with random subsidence by adsorbed species. The negative ΔG° values (-9.9540 to -8.6286 kJ/mol) indicate the spontaneity and viability of the adsorption system. The optimum conditions for MB adsorption onto GA@SnO 2 -AC were obtained at an adsorbent dosage of 50 mg, a concentration of 58 mg/L, a contact time of 48 min, and a pH of 11.0, with a desirability of 1. The results indicated that 98.64% of the MB dye had been removed. The model validation results showed 98.13%, indicating an excellent fit between the predicted and actual values. The GA@SnO 2 -AC showed excellent stability and regeneration ability towards MB, with a removal efficiency of 86.66% at its five repeated adsorption-desorption cycles. This current study establishes the basis for the possible development of environmentally friendly and economical treatment methods, providing novel opportunities to address key environmental concerns in the water treatment sector.

  • Open Access

    A comprehensive review on adsorption technologies for methylene blue elimination: efficiency, mechanisms, and future perspectives

    by John Busayo Adeoye, Sie Yon Lau, Yie Hua Tan, Yee Yong Tan, Tung Chiong, Nabisab Mujawar Mubarak, Gnanasambandam Anbuchezhiyan, Mohammad Khalid, Jeffrey Tze Wei Ng

    Methylene blue is a poisonous dye commonly used as a colorant in the textile industry, and removing it from water can be a challenging task. In this attempt, the current state of the art in adsorption techniques that guarantee the full removal of this pollutant from water bodies is critically evaluated. In the adsorption experiments, some efficiencies in using various materials are discovered to be positive; also, both the methodologies and nanocomposites remain cost-effective. In this paper, multiple research studies conducted by researchers on various adsorbents for removing MB from aqueous solutions are evaluated, collated, and compared to identify low-cost and successful methods by estimating percentage removal. Despite substantial technological advancements, wastewater treatment remains a pressing global issue. The adsorption approach is commonly used to remove contaminants from water bodies. Adsorption is recommended because of its simple design and low cost. The review provides a comprehensive approach to MB removal and the effects of several critical factors affecting adsorption performance. The study aims to evaluate the effectiveness of various adsorbents in removing MB from water bodies This study describes some of the most recent breakthroughs in adsorbent synthesis, emphasizing the trend toward greener and more economically feasible approaches. Furthermore, various mechanisms responsible for removing MB are described based on surface complexation, π-π interactions, ion exchange, van der Waals forces, electrostatic attraction, and hydrogen bonding. Future research would focus on improving the materials’ performance, exploring alternative energy sources for photocatalysis, and integrating such methods into existing water treatment systems. The resolution will support the large-scale application of these methods to the adsorption of MB and other contaminants from water bodies, resulting in better and safer water supplies.


  • Open Access

    Efficient dye removal from aqueous solution using a hybrid GA@ZnO-AC nanocomposite

    by John Busayo Adeoye, Sie Yon Lau, Yie Hua Tan, Yee Yong Tan, Tung Chiong, Nabisab Mujawar Mubarak, Mohammad Khalid, Jeffrey Tze Wei Ng

    Environmental damage caused by colored effluents poses a threat to the environment, as vast amounts of harmful water contamination are regularly discharged into water sources. The hybrid nanocomposite was successfully synthesized using hydrothermal and thermal treatment methods. A prepared hybrid nanostructure metal composite material, utilizing gallic acid (GA@ZnO-AC), was synthesized and employed for the treatment of methylene blue (MB) in an aqueous environment via adsorption. FTIR, SEM-EDX, BET, and XRD analyses were performed on the hybrid composite. The ZnO, ZnO-AC, and GA@ZnO-AC have a BET surface area of 3.7360, 491.8929, and 467.51 m2/g, pore volume of 0.004039, 0.286580, and 0.247606 cm3/g, and average pore diameter of 4.3240, 2.3304, and 2.1185 nm, respectively. TGA and TEM results indicate that the material is thermally stable due to its phase transition and exhibits a nano-scale shape. The adsorptive performance of nanocomposites ZnO-AC and GA@ZnO-AC for MB removal was significantly influenced by contact time (60 min), temperature (298 K), adsorbent dosage (60 mg (ZnO-AC), 50 mg (GA@ZnO-AC)), and pH (11). The percentage absorbed MB was 98.61% for ZnO-AC and 98.30% for GA@ZnO-AC at their optimum condition. The Langmuir isotherm showed that ZnO-AC and GA@ZnO-AC had the highest adsorption capacities of 153.85 mg/g and 175.44 mg/g, respectively, at 298 K. Isotherm, kinetics, and thermodynamics studies showed that the results fitted the Redlich-Peterson and PSO models, which indicated a spontaneous, feasible, exothermic, and physisorption process. This study presents a low-cost hybrid material that addresses environmental concerns related to the removal of dyes from aqueous media.


  • Top Cited Papers
    Open Access

    Advanced oxidation and biological integrated processes for pharmaceutical wastewater treatment: A review

    by John Busayo Adeoye, Yie Hua Tan, Sie Yon Lau, Yee Yong Tan, Tung Chiong, Nabisab Mujawar Mubarak, Mohammad Khalid


  • Open Access

    Process Integration of Hydrogen Production Using Steam Gasification and Water‐Gas Shift Reactions: A Case of Response Surface Method and Machine Learning Techniques

    by Anthony Ikechukwu Okoji, Abiola Ezekiel Taiwo, John Busayo Adeoye, Paul Musonge, David Olamide Makinde, Comfort Nneka Okoji

    An equilibrium‐based steady‐state simulator model that predicts and optimizes hydrogen production from steam gasification of biomass is developed using ASPEN Plus software and artificial intelligence techniques. Corn cob’s chemical composition was characterized to ensure the biomass used as a gasifier and with potential for production of hydrogen. Artificial intelligence is used to examine the effects of the significant input variables on response variables, such as hydrogen mole fraction and hydrogen energy content. Optimizing the steam‐gasification process using response surface methodology (RSM) considering a variety of biomass‐steam ratios was carried out to achieve the best results. Hydrogen yield and the impact of main operating parameters were considered. A maximum hydrogen concentration is found in the gasifier and water‐gas shift (WGS) reactor at the highest steam‐to‐biomass (S/B) ratio and the lowest WGS reaction temperature, while the gasification temperature has an optimum value. ANFIS was used to predict hydrogen of mole fraction, 0.5045 with the input parameters of S/B ratio of 2.449 and reactor pressure and temperature of 1 bar and 848°C, respectively. With the steam‐gasification model operating at temperature (850°C), pressure (1 bar), and S/B ratio of 2.0, an ASPEN simulator achieved a maximum of 0.5862 mole fraction of hydrogen, while RSM gave an increase of 19.0% optimum hydrogen produced over the ANFIS prediction with the input parameters of S/B ratio of 1.053 and reactor pressure and temperature of 1 bar and 850°C, respectively. Varying the gasifier temperature and S/B ratio have, on the other hand, a crucial effect on the gasification process with artificial intelligence as a unique tool for process evaluation, prediction, and optimization to increase a significant impact on the products especially hydrogen.


  • Open Access

    Adsorption of Heavy Metals from Paint Industry Wastewater Using Activated African Cherry Seed Shell and Brewers Spent Grain

    by Temitayo Elizabeth Oladimeji, Gbemisola Mercy Fawole, Moses Emetere, John Busayo Adeoye, Olayemi Abosede Odunlami, Olubunmi Grace Abatan

    The disposal of heavy metals from industrial wastewater, especially in the paint industry, poses a significant environmental. Activated carbon is already known to play significant roles in removal of heavy metals from waste water. However, inefficiency of activated carbon in heavy metal adsorption has been traced to the inherit chemical properties in the biomass sources. It is proposed in this study that biomass source will have significant effect on its specific surfaces, pore volumes, and pore size distributions. African Cherry Seed Shell (CSS) and brewer's spent grain (BSG) was used in this experimentation. The prepared Activated carbon was carbonized at 5500C before it was activated chemically using phosphoric acid at an impregnation ratio of 1:2.5, 1:5, 1:10. The prepared activated carbon was used to treat the wastewater via batch adsorption for a contact time of 60 minutes and 120 minutes. The batch adsorption efficiency was studied by varying contact time, impregnation ratio which in turn varied surface area. The ion concentration, surface morphology, surface area and pore size, surface active functional group were characterized using Atomic Absorption Spectrometry (AAS), Scanning Electron Microscopy (SEM) analysis, Brunauer-Emmett-Teller (BET) analysis and Fourier Transform Infrared Spectroscopy (FTIR) respectively. It was concluded from the results that both adsorbents are good potential precursors in removal of heavy metals. However, the brewery spent grain was found to be more effective in the removal of lead, copper and chromium as it gave better efficiencies.

  • Open Access

    Rapid adsorptive removal of eosin yellow and methyl orange using zeolite Y

    by John Busayo Adeoye, David Ololade Balogun, Oghenefejiro Jeshurun Etemire, Princewill Nnaneme Ezeh, Yie Hua Tan, Nabisab Mujawar Mubarak

    In this study, zeolite Y was synthesised using a novel method. The heat generated from the reaction of H2SO4 with metakaolin was used as a heat source instead of applying external heat for the dealuminated process. The synthesised zeolite Y produced was analysed by scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier-infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDS) and Brunauer–Emmett–Teller (BET). Zeolite Y synthesis was mesoporous because of its pore diameter (30.53 nm), as shown in the BET results. Surface area and pore size decrease after adsorption due to dye deposition on the adsorbent’s surface. FTIR has bonds like O–H, C–H, –CH3, and –COOH responsible for adsorption. The maximum adsorption capacity of eosin yellow (EY) and methyl orange (MO) on to zeolite Y by the Langmuir isotherm was 52.91 mg/g and 20.62 mg/g respectively, at pH 2.5 and 8 for EY and MO dye. The batch adsorption studies were conducted, and the influence of different parameters (i.e., adsorbent dose, adsorption time, initial dye concentration, pH and temperature) was investigated. Experimental data were analysed by two linear model equations (Langmuir and Freundlich isotherms), and it was found that the Langmuir isotherm model best describes the adsorption data for methyl orange and Freundlich isotherm for eosin yellow, respectively. Adsorption rate constants were determined using linear pseudo-first-order and pseudo-second-order. The results showed that MO and EY dye adsorption onto zeolite Y followed a pseudo-second-order kinetic model. Thermodynamic studies show that adsorption was an exothermic reaction (enthalpy < 0) and feasible ( $$(Gibbs free energy)<0$$ ( G i b b s f r e e e n e r g y ) < 0 ) at various temperatures under investigation.


  • Green Synthesis, Optimization and Extraction of Silica from Rice Straw Ash for Solar Cells

    by Olamide Oyewole, John B. Adeoye, Temitope A. Oshin, Alex Paul, T. Siji Abayomi, Olusegun D. Kolawole

    In recent times, there has been an increased clamor for the development of sustainable technologies which will focus on environmental sustainability. More and more, agricultural waste is being explored for sustainable environmental solutions. In the light of this, this research focuses on the optimization of rice straw ash for silica extraction using Box-Behnken approach. The interactions of three variables studied were: Rice Straw (RS): 3- 6 g; Time: 3–6 h and Temperature: $400-600^{\circ}\mathrm{C}$ . The rice straw was subjected to proximate analysis. X-Ray Florescence (XRF) was used to characterize ashes to get the most purified silica. The silica from result of XRF and the silica gotten via the optimal predicted silica which was validated were subjected to FTIR. SEM and an X-Ray Diffractometer were used to analyze the best (XRD). The result of proximate analysis showed that ash was present. The XRF result of most purified silica was at Temp: $600^{\circ}\mathrm{C}$ , RS:4 g and time: 6 h. FTIR result showed that more stretching of gel network was observed in silica via the validated experiment. The XRD analysis revealed a highly reactive amorphous silica. Agglomerated colloidal spheres of nano silica were also visible in SEM. It was concluded that rice straw is a good biowaste for extraction of silica for modern technological applications and solar cells.