SMSai Ma

Sai Ma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sai Ma has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • An Integrated Shared-Aperture Active Phased Array Enabling STAR LEO Satellite Communication: Concept, Design, and Validation

    by Kai Chen, Jun Xu, Haojie Gang, Yuechao Wang, Sai Ma, Debin Hou, Zhiqiang Yu, Jianyi Zhou, Zhang-Cheng Hao, Jixin Chen, et al.

    This study introduces an innovative K-/Ka-band planar active shared-aperture phased array (ASAPA), advancing low earth orbit (LEO) terminal design through synergistic innovations in shared-aperture topology and three-dimensional (3D) integration. Breaking from conventional shared-aperture topologies plagued by cross-band interference and radiation pattern distortion, we propose a partial-element-reuse-based (PER) topology that strategically repurposes 50% of dual-band dual-polarized elements for simultaneous transmit and receive (STAR) operation. This configuration eliminates active element pattern distortion while achieving a reduction in element count, enabling wide-angle beam scanning essential for dynamic satellite tracking. Furthermore, a sandwich-structured printed circuit board (PCB) lamination method is further employed to streamline integration by partitioning functional modules into antenna, coupler, and active circuit layers interconnected via ball grid array (BGA) technology. This 3D integration strategy simplifies vertical interconnects, minimizes PCB layer requirements, and enhances thermal dissipation through embedded air gaps. Experimental results validate robust beamforming performance across ±60° scanning ranges for both transmitting and receiving arrays, achieving high transceiver isolation and signal integrity, which are imperative for high-capacity satellite links. By addressing key bottlenecks in LEO terminal design, the proposed innovations can accelerate the deployment of energy-efficient, cost-effective satellite networks, thus advancing the 6G vision of ubiquitous global connectivity.


  • Compact Wideband Low-Loss SICL-to-Ridge Waveguide Transition for Integrating Millimeter-Wave 3-D Full-Metal Array With Planar Circuits

    by Sai Ma, Jun Xu, Yuechao Wang, Si-Yuan Tang, Zijia Wu, Kai Chen, Wei Hong

    In this article, a compact, wideband, and low-loss substrate integrated coaxial line (SICL)-to-ridge waveguide (RIWG) transition is proposed, which is specifically designed for the seamless integration of millimeter-wave (mmWave) large-scale full-metal arrays with planar circuits. By replacing the conventional backshort with a capacitive patch, a compact structure is obtained. Moreover, wideband performance is realized by incorporating a parasitic patch and an iris into the proposed transition. Furthermore, the coupling window between the substrate and the RIWG, as well as the impedance transformer connecting the transition and the input SICL, is specifically designed to enhance the overall matching performance. To elucidate the detailed working principle of the transition, a series of equivalent circuits is developed to analyze the evolution of the proposed transition. For verification, a back-to-back SICL-to-RIWG transition prototype is fabricated and measured. The measured results indicate that the transition offers a wide operating bandwidth of 68% ( $23.9\sim 48.5$ GHz) with an insertion loss lower than 0.37 dB within the operating band. As an extension, a waveguide aperture antenna with enhanced heat-dissipation capability, based on RIWG, is designed for integration with the proposed SICL-to-RIWG transition to form a phased array while effectively reducing system temperature. The antenna features a semi-open structure and employs a corrugated aperture, achieving a wide operating bandwidth, stable in-band gain, and desirable beam-scanning capability. For demonstration, the integrated design is fabricated and measured, with the measured results confirming its outstanding performance.

  • Millimeter-Wave Dual-Polarized Bidirectional Phased Array Antenna With Forward/Backward Beam Scanning for B5G/6G Mobile Phones

    by Xiaoyue Xia, Zhi Hao Jiang, Fan Wu, Chao Yu, Jun Xu, Si-Yuan Tang, Sai Ma, Sidou Zheng, Yu Yao, Wei Hong

    In this communication, a millimeter-wave (mmWave) dual-polarized bidirectional antenna array is proposed for B5G/6G mobile phones, featuring enhanced beam coverage capability. Firstly, for vertical polarization (VP), a meandering U-shaped feeder is utilized to enable common mode (CM) excitation for magnetic dipole antennas operating at modified-TE1,1,0 and TE2,1,0 modes. Through a radiation reshaping technique, both modes exhibit ∞-shaped radiation patterns. Secondly, for horizontal polarization (HP), an S-shaped feeder is employed to provide differential mode (DM) excitation for open-slot and parasitic open-slot modes, while also functioning as a monopole antenna. Then, the VP antenna is seamlessly integrated into HP antenna, and the natural orthogonality between CM and DM provides polarization isolations above 22 dB. Lastly, a 1×4 array with dimensions of 25.1×6.4×1.2 mm³ is fabricated, achieving a -10-dB impedance bandwidth of 26.3-40.1 GHz (41.6%). When incorporated in a smartphone platform, the array enables simultaneous beam scanning in both forward and backward spatial regions, demonstrating 3 dB scan-loss range of 195°/147° at 28.0/39.0 GHz for VP and 152°/142° at 28.0/39.0 GHz for HP. Benefiting from the expanded beam coverage, the proposed bidirectional array emerges as a promising candidate for future mobile terminals.

  • Compact Millimeter-Wave High-Selectivity Filtennas and Arrays Incorporating Multiparasitic Structures for Miniaturized Wireless Devices

    by Sai Ma, Jun Xu, Kai Chen, Yuechao Wang, Yunli Li, Lei Xiang, Xiaoyue Xia, Wei Hong

    In this article, compact millimeter-wave (mmWave) filtennas are proposed based on the multiparasitic structure incorporation technique to achieve high selectivity, and their working principle is systematically analyzed using equivalent lumped circuits. Initially, a single-polarized filtenna is designed in the form of a proximity-coupled stacked patch antenna. Cross and ring patches are employed to achieve compact size, while high selectivity is realized by incorporating multiparasitic structures, i.e., shorted stubs, ring patches, and C-shaped strips. Subsequently, the single-polarized filtenna is extended to a dual-polarized version by utilizing two sets of identical feeding structures, while maintaining high polarization isolation. Prototypes of both the single- and dual-polarized filtennas are fabricated and measured. The results indicate that the −10-dB impedance bandwidths of the filtennas cover a broad mmWave band ranging from 24.25 to 29.5 GHz, with out-of-band suppression exceeding 20 dB. Furthermore, two $1\times 4$ arrays are constructed using the proposed single- and dual-polarized filtennas, respectively, incorporating essential decoupling structures to improve the port and polarization isolation. Experimental results confirm the exceptional scanning and filtering performances of the two arrays. The merits of all the proposed filtennas and arrays make them promising candidates for B5G/6G miniaturized wireless devices.


  • A Multibeam Antenna Using Compact Low-Profile Wideband 4 × 8 Butler Matrix Incorporating Diverse Transmission Lines

    by Wei Li, Jun Xu, Kai Chen, Sai Ma, Qingqing Lin, Wei Hong

    This letter introduces a multibeam antenna that employs a compact, wideband 4 × 8 Butler matrix (BM), incorporating diverse transmission lines such as substrate-integrated coaxial line (SICL), grounded coplanar waveguide (GCPW), and substrate-integrated waveguide (SIW) without increasing the number of dielectric substrate layers. This approach enhances the topology of the 4 × 8 BM. By replacing crossovers with spatially crossed GCPW transmission lines at the top and bottom layers, the configuration of the network is greatly simplified, facilitating the miniaturization of the BM. Furthermore, an ideal 180-degree phase-shifting scheme is proposed that not only addresses the issue of signal lines not being on the same layer but also achieves 180-degree phase shifting across the wide operating band by transitioning the GCPWs on the top and bottom layers to the SIW cavity. Finally, eight magneto-electric dipoles (ME-dipoles) were connected to the output ports of the 4 × 8 BM forming the proposed multibeam antenna. A prototype of this multibeam antenna was fabricated and measured, it is evident that a compact structure and an impressive operating bandwidth of 20.56% (24-29.5 GHz) has been achieved. The measured data confirms its potential as a promising candidate for B5G/6G millimeter-wave communications.


  • A Broadband Low-Loss SICL to Ridge Waveguide Transition for Millimeter-Wave Applications

    by Sai Ma, Jun Xu, Yuanwei Zhu, Kai Chen, Qingqing Lin, Wei Li, Wei Hong

    In this article, a millimeter-wave (mmWave) broadband low-loss substrate integrated coaxial line (SICL) to ridge waveguide (RIWG) transition is proposed. The transition realizes the conversion from the TEM mode in SICL to the TE10 mode in RIWG through a T-shaped patch. To achieve broadband and low loss characteristics, a multi-section impedance transformer is employed to enhance the matching performance at low frequencies, and metalized via array matching structures are used to improve the matching performance at high frequencies. For verification, a back-to-back transition prototype was designed and fabricatedC and the measured results agree well with the simulated ones. The measured results indicate that the transition structure has a wide operating bandwidth of 71 covering 23 GHz to 48.35 GHz, and the insertion loss is lower than 0.35 dB within the entire operating band. The merits of the proposed transition, e.g., compact size and stable performance, make it promising for advanced millimeter-wave circuits and systems.


  • Open Access

    Wideband Single and Dual Linearly Polarized Magneto-Electric Dipole Array Antennas for 5G/6G Millimeter-Wave Applications

    by Lei Xiang, Fan Wu, Kai Chen, Renrong Zhao, Sai Ma, Yuanwei Zhu, Chao Yu, Zhi Hao Jiang, Yu Yao, Wei Hong

    A new taper-shaped linearly polarized (LP) magneto-electric (ME) dipole, excited by the U-shaped microstrip line through a coupling slot, is proposed in this paper. An ultra-wide simulated impedance bandwidth of 85% (20.5-50.6 GHz) and 1.5-dB gain bandwidth of 73% (22.3-47.9 GHz) with a peak gain up to 7.7 dBi are achieved, combining the advantages of simple and compact structure, high integration, easy assembling and stable radiation characteristics. For proof-of-concept demonstration, a $4\times4$ LP array antenna is then implemented with an ultra-wide measured impedance bandwidth of 91.8% (18.8-50.7 GHz) and 3-dB gain bandwidth of 69.3% (19.8 to 40.8 GHz) as well as a peak gain of 18.0 dBi. Subsequently, the LP element is conveniently extended to a dual-polarized (DP) one due to its 90° rotationally symmetrical structure, exhibiting a wide simulated overlapped bandwidth of 61.4% (23.7-44.7 GHz), port isolation exceeding 17 dB and a stable gain response with a peak gain of 7.5 dBi. Furthermore, two $1\times4$ DP active phased array antennas (APAAs) are designed by utilizing the integrated circuits (ICs) for 5G/6G millimeter-wave (mmWave) mobile terminal applications. Meanwhile, the beam-scanning performances at 28- and 38-GHz are measured for both polarizations. The validated advantages render the proposed antenna designs competitive candidates for diverse 5G/6G mmWave applications.


  • A Wideband Differentially Fed Dual-Polarized Antenna Array for 5G/6G mmWave Application

    by Lei Xiang, Fan Wu, Kai Chen, Yunli Li, Sai Ma, Xiaoyue Xia, Chao Yu, Zhi Hao Jiang, Yao Yu, Wei Hong

    In this article, a wideband millimeter-wave (mmWave) differentially-fed (DF) dual-polarized (DP) magneto-electric (ME) dipole antenna is proposed for the fifth and sixth generation (5G/6G) wireless communications. Benefitting from the delicately-designed cross-overlap differential feeding scheme deployed at the center of the perfectly-symmetrical antenna, the ME-dipole can be effectively excited to achieve wideband operation for both orthogonal polarizations. Meanwhile, the feeding and radiation structures can be located at the same metallic layer to reduce the profile height while maintaining a high port isolation. When the antenna element is excited by the ideal differential ports, a wide overlapped impedance bandwidth of about 58.3% (24.2-44.1 GHz), port isolation higher than 30 dB, a stable gain response with a peak gain of 7.5 dBi and symmetrical radiation patterns with low cross polarization levels less than −40 dB can be achieved. For proof-of-concept demonstration, a corresponding 1 × 4 phased array antenna is designed, fabricated and measured. A wide overlapped active impedance bandwidth of about 58% (24.7-44.8 GHz) and beam scanning characteristics of the array are experimentally verified. In virtue of wide bandwidth, simple and compact geometry, low profile, high integration, and ease of fabrication and miniaturization, the proposed antenna design is promising for diverse 5G/6G mmWave applications.