WMWalid Mohamed Mabrouk

Walid Mohamed Mabrouk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Walid Mohamed Mabrouk has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Petrophysical analysis and pressure gradients reveal hydrocarbon potential in the Paleozoic pre-rift of the PTAH Oil Field, Egypt

    by Ahmed I. Mahmoud, Xiaodong Ma, Walid M. Mabrouk, Ahmed M. Noureldin, Ahmed Metwally

    The PTAH oil field in Egypt’s northern Western Desert offers considerable potential for hydrocarbon production. This research centers on the Shiffah formation and evaluates its petrophysical properties using data from four wells. The analysis involves wireline logs (including gamma-ray, density, neutron, sonic, and resistivity), core samples, pressure readings, and cross-plots. A combination of qualitative and quantitative techniques was employed to assess the formation’s hydrocarbon-bearing capacity. The Shiffah formation primarily comprises sandstone, calcareous shale, and siltstone. Key petrophysical parameters such as shale volume, effective porosity, net thickness, and fluid saturations were mapped to evaluate variations across the field. Findings indicate that the reservoirs have an average shale content of 2.5%, an effective porosity of 11%, and an oil saturation averaging 47.84%. The net reservoir thickness ranges from 97.5 to 655 feet, with the net pay zones between 6.5 and 137 feet. These results underscore the potential for hydrocarbons within the field. Core analysis supports these findings, highlighting favorable horizontal and vertical permeability values. The correlation between well-log data and pressure information also aligns with production outcomes from Drill Stem Tests (DST). Among the wells, Ptah-1X exhibited the most promising petrophysical properties, whereas Ptah-4X was determined to be a dry well, with water saturation as high as 98%. Reservoir pressure analysis helped to pinpoint key fluid contacts, such as the oil–water contact (OWC). Pickett’s plot was used to calculate formation water resistivity, yielding values between 0.0170 and 0.0176 across the four wells. This comprehensive evaluation of the Shiffah formation offers valuable insights into its hydrocarbon potential and guides future exploration and drilling.


  • Open Access

    Pre-stack seismic inversion for reservoir characterization in Pleistocene to Pliocene channels, Baltim gas field, Nile Delta, Egypt

    by Ali S. El-Sayed, Walid M. Mabrouk, Ahmed M. Metwally

    The Nile Delta, North Africa’s leading gas-producing region, was the focus of this study aimed at delineating gas-bearing sandstone reservoirs from the Pleistocene to Pliocene formations using a combination of pre-stack inversion and rock physics analysis. This research employed seismic inversion techniques, including full-angle stack seismic volumes, well logs, and 3-D with rock physics modeling to refine volumes of P-wave velocity (Vp), S-wave velocity (Vs), and density. Traditional seismic attributes, such as far amplitude, proved insufficient for confirming gas presence, highlighting partial angle stacks, integrated the need for advanced methods. Extended Elastic Impedance (EEI) analysis was used to predict fluids and identify lithology in clastic reservoir environments. The EEI approach facilitated the determination of optimal projection angles for key petrophysical properties such as porosity, shale volume, and water saturation. This method was applied to the middle Pliocene (Kafr El Sheikh Formation) and the Pleistocene (El Wastani Formation), revealing promising drilling sites. In the Kafr El Sheikh Formation, porosity ranged from 16 to 29%, shale volume from 21 to 40%, and hydrocarbon saturation from 25 to 90%. The study concludes that integrating pre-stack seismic inversion with EEI significantly enhances the likelihood of identifying gas-bearing sands while reducing exploration risks. The improved POS for the Pleistocene anomaly gas bearing sand (from 49 to 69%) and the middle Pliocene anomaly (from 46 to 66%) underscores the effectiveness of this approach in the Baltim Field, Offshore Nile Delta, and supports further drilling and development wells.


  • Open Access

    Multiples Elimination to enhance Seismic Imaging for Safe Wind Farm Establishment: A case study from Baltic Sea

    by Eslam Roshdy, Walid Mabrouk, Ahmed Metwally

    The primary objective of this paper is to eliminate the effect of multiples on seismic data using different multiple attenuation techniques, ultimately enhancing seismic imaging for the establishment of wind farms in the study area. Seismic reflection data processing is a highly effective method for detecting potential hazards such as mines and shallow gas bubbles, making it crucial for environmental hazard assessments. In this study, multiple elimination methods were combined to attenuate different types of multiples in 2D raw shallow marine seismic data from the Baltic Sea region. The demultiple workflow combined several robust techniques: Surface-Related Multiple Elimination (SRME), Tau-P deconvolution, high-resolution (HR) radon demultiple, and Common Depth Point (CDP) stacking. SRME was used to remove surface-related multiples by subtracting predicted multiple models from the seismic data, followed by Tau-P deconvolution to attenuate short-period multiples. HR radon demultiple was then employed to attenuate any remaining multiples, which could not be eliminated by previous methods, and finally, CDP stacking of normal moveout-corrected data was applied to improve the alignment of primary reflections and eliminate non-aligned multiples. The improvement in data quality was not solely due to the individual demultiple techniques but from their integration. Each method addresses specific types of multiples and noise, and the combined workflow ensures the optimal suppression of unwanted energy without losing important seismic signal. The final stacked seismic section showed significant improvement in image clarity, confirming the absence of predicted mines or shallow gas bubbles beneath the surface. Based on these findings, the study concludes that the area is suitable for wind farm construction.

  • Open Access

    An Integrated Approach for Saturation Modeling Using Hydraulic Flow Units: Examples from the Upper Messinian Reservoir

    by Nader H. El-Gendy, Walid M. Mabrouk, Mohamed A. Waziry, Thomas J. Dodd, Fathy A. Abdalla, Dimitrios E. Alexakis, Moataz Khairy Barakat

    The Upper Messinian reservoirs located in the Salma Field of the Nile Delta area contain variable facies. The key reservoir interval of the Abu Madi Formation was deposited in fluvial to deltaic environments. These fine-grained facies form significant reservoir heterogeneity within the reservoir intervals. The main challenges in this study are reservoir characterizing and predicting the change in reservoir water saturation (SW) with time, while reservoir production life based on the change in reservoir capillary pressure (Pc). This work applies petrophysical analysis to enable the definition and calculation of the hydrocarbon reserves within the key reservoir units. Mapping of SW away from the wellbores within geo-models represents a significant challenge. The rock types and flow unit analysis indicate that the reservoir is dominated by four hydraulic flow units. HFU#1 represents the highest flow zone indicator (FZI) value. Core analysis has been completed to better understand the relationship between SW and the reservoir capillary pressure above the fluid contact and free water level (FWL), which is used to perform saturation height function (SHF) analysis. The calculated SW values that are obtained from logs are affected by formation water resistivity (Rw) and log true resistivity (RT), which are influenced by the volume of clay content and mud salinity. This study introduces an integrated approach, including evaluation of core measurements, well log analysis covering cored and non-cored intervals, neural analysis techniques (K-mode algorithm), and permeability prediction in non-cored intervals. The empirical formula was predicted for direct calculation of dynamic SW profiles and predicted within the reservoir above the FWL based on the change in reservoir pressure.


  • Open Access

    Superimposed structure in the southern periphery of Abu Gharadig Basin, Egypt: Implication to petroleum system

    by Ahmed Mamdouh Noureldin, Walid Mohamed Mabrouk, Ahmed Mohsen Metwally

    South West Abu-Sennan (SWS) area near the southern periphery of the Abu-Gharadig petroliferous basin in the Egyptian Northern Western Desert is an important hydrocarbon field characterized by being a multi-reservoir with a complex structural architecture. Therefore, in this study, we illustrated the regional structural role that facilitated having Jurassic mature source rocks (Masajid and Khatatba formations) through surgical seismic interpretation and observed the controlling petroleum system of the study area using a set of 20 seismic lines and 4 wells data. The study resulted in having the SWS oil field controlled by a strike-slip movement that occurred during the Upper Cretaceous time accompanying the African Plate movement against the Eurasian Plate superimposing an ENE–WSW strike-slip fault zone in the region and a strong pattern of NW–SE-oriented faults due to numerous phases of extension. The associated structures include horsts, normal fault propagation folds, and strike-slip-related anticlines. The strike-slip tectonics played a major role in forming entrapment for the Jurassic expelled hydrocarbons. The seismic horizons flattening exercise performed on AR/G member and Khoman Formation demonstrated that the main reason for not having hydrocarbon accumulations in the Jurassic levels in the study area is that the trap configuration was ready to accumulate hydrocarbon but after the hydrocarbon generation and migration time. The study concluded that the hydrocarbons migrated along the faults which cut deeply to the source rocks and entrapped in the possible cretaceous reservoirs during the late cretaceous time. The conducted workflow in this study can be utilized to better explore and develop cretaceous reservoirs in the study and neighbouring areas.